Blender/C2/3D-Cursor/Gujarati

Time	Narration
00.03	બ્લેન્ડર ટ્યુટોરીયલની શ્રેણીમાં તમારું સ્વાગત છે..
00.07	આ ટ્યુટોરીયલ બ્લેન્ડર 2.59 માં 3D કર્સર વિશે છે.
00.25	આ ટ્યુટોરીયલ જોયા પછી,આપણે શીખીશુંકે 3D કર્સર શું છે
00.32	બ્લેન્ડરમાં 3D કર્સરનો ઉપયોગ કરી 3D વ્યુમાં નવા ઓબ્જેક્ટો અને બ્લેન્ડરમાં 3D કર્સર માટે સ્નેપીંગ ઓપ્શન કેવી રીતે ઉમેરવા
00.46	હું માનું છુ કે તમને પહેલેથી જ ખબર છે કે તમારી સિસ્ટમ પર બ્લેન્ડર કેવી રીતે સંસ્થાપિત કરવું.
00.51	જો નહિં તો અમારા બ્લેન્ડર સ્થાપિત કરવા પરના પહેલાં ટ્યુટોરિયલ્સનો સંદર્ભ લો.
00.57	આ 3D કર્સર ક્રોસ વાળ સાથે લાલ અને સફેદ રીંગ છે.જે તમને બ્લેન્ડર સ્ક્રીનની મધ્યમાં જુઓ છો.
01.06	બ્લેન્ડર માં 3D કર્સર જોઇયે,તેને કરવા માટે આપણે બ્લેન્ડરને ખોલવું પડશે.
01.12	બ્લેન્ડર ખોલવા માટે બે માર્ગો છે.
01.15	પ્રથમ, ડેસ્કટોપ પર બ્લેન્ડર ચિહ્ન પર જાઓ. બ્લેન્ડર આઇકોન પર જમણું ક્લિક કરો. ડાબુ ક્લિક કરી ખોલો.
01.27	બ્લેન્ડર ખોલવા માટે બીજો અને સરળ માર્ગ છે. ડેસ્કટોપ પર બ્લેન્ડર આઇકોન પર ડાબું બે વાર ક્લિક કરો.
01.42	This is Blender 2.59. Please note that the screen resolution shown here is 1024 by 768 pixels.
01.54	The font size in the Blender interface has been increased so that you can understand all the options given.
02.01	To learn how to increase the Interface font size please see the tutorial on User Preferences.
02.12	This is known as the welcome page or splash screen. It shows some useful reference links for learning about Blender.
02.20	To remove the splash screen, press ESC on your keyboard or
02.25	left click mouse anywhere on the Blender interface other than splash screen.
02.32	Now you can see the default Blender workspace.
02.37	The 3D cursor is right at the centre of the screen surrounded by the cube.
02.43	We can’t see the cursor properly so we must delete the cube.
02.48	By default, the cube is already selected.
02.51	To delete it, press the delete button on the keyboard. Left click Delete.
02.58	There, you might be able to see the 3D cursor better now.
03.04	The primary purpose of the 3D Cursor is to specify the location of a new object added to the 3D scene
03.15	Go to ADD. Go to Mesh. Left click Cube.
03.19	You can also use key board shortcut shift & A to add new objects to the 3D view.
03.27	A new cube is added to the 3D view.
03.30	As you can see, the new cube has appeared on the same location as the 3D cursor.
03.38	Now let us see how we can add a new object to a new location.
03.44	First we need to move the 3D cursor to a new location.
03.48	To do this, left click at any location in the 3D space.
03.53	I am clicking to the left side of the cube.
03.59	Shift & A to add a new object. Mesh. Left click UV sphere.
04.10	The UV sphere appears at the new location of the 3D cursor.
04.15	Now we shall see the snapping options for the 3D cursor
04.22	Go to Object. Go to Snap. This is the Snap menu.
04.29	There are various options here.
04.31	You can also use the keyboard shortcut Shift & S.
04.38	Selection to cursor snaps the selected item to the 3D cursor.
04.45	For example, let us snap the cube to the 3D cursor.
04.50	Right click on the cube. Shift & S to pull up the snap menu.
04.58	Left click Selection to cursor. The cube snaps to the 3D cursor.
05.06	Now lets move the cube to the right. Left click green handle, hold and drag your mouse to the right.
05.17	For keyboard shortcut, Press G&Y.
05.23	To learn more about moving objects in the 3D view see the tutorial on Basic description of Blender interface.
05.35	Shift & S to pull up the snap menu. Left click cursor to selected.
05.43	The 3D cursor snaps to the centre of the cube in the new location.
05.50	In case you have more than 1 object selected at the same time, say the cube and the UV sphere here,
05.59	Cursor to selected snaps the 3D cursor at the centre of the two objects selected.
06.07	Let me demonstrate. As you can see, the cube is already selected.
06.12	Shift plus right click to select the UV sphere. So now you have two objects selected at the same time.
06.22	Shift & S to pull up the snap menu. Click Cursor to selected.
06.30	The 3D cursor snaps to the centre of the two selected objects.
06.36	Now Shift plus right click the lamp. Shift & S to pull up the snap menu.
06.47	Click Cursor to Selected. The 3D cursor snaps to the centre of the 3 selected objects.
06.58	Click on any point in the 3D view to move the 3D cursor. I am clicking to the bottom right.
07.07	Shift & S to pull up the snap menu.
07.12	Click Cursor to Center. The 3D cursor snaps to the centre of the 3D view
07.22	Press A on the keyboard to deselect the objects.
07.28	Now, right click the UV sphere. Press A to deselect it.
07.39	Shift & S to pull up the snap menu.
07.44	Click Cursor to active.
07.47	The 3D cursor snaps to the centre of the UV sphere the last active selection
07.56	The 3D cursor provides additional benefits when used as a pivot point while modeling,
08.03	but we shall look at that in later tutorials.
08.08	Now try to add new objects to the 3D view in different locations using the 3D cursor.
08.16	After that, explore the snapping options in the snap menu. All the best!
08.26	So that wraps up our tutorial on Blender’s 3D Cursor.
08.31	This Tutorial is created by Project Oscar and supported by the National Mission on Education through ICT.
08.40	More information on the same is available at thefollowing links oscar.iitb.ac.in, and spoken-tutorial.org/NMEICT-Intro.
09.00	The Spoken Tutorial Project
09.02	conducts workshops using spoken tutorials
09.06	also gives certificates to those who pass an online test.
09.11	For more details, please contact contact@spoken-tutorial.org
09.17	Thanks for joining us
09.19	and this is Monisha from IIT Bombay signing off.

Contributors and Content Editors

Jyotisolanki, Krupali, Ranjana