DWSIM/C3/Custom-Unit-Operation-using-Scilab/English

Visual Cue	Narration
Slide Number 1 Title Slide	Welcome to this tutorial on simulating a Custom Unit Operation using Scilab.
Slide Number 2 Learning Objective	In this tutorial, we will learn to: Create a custom unit operation using Scilab Calculate the Outlet pressure of product stream Calculate Molar flow rate and Enthalpy
Slide Number 3 System Requirements	To record this tutorial, I am using DWSIM 5. 6 update 8 (Classic UI) and Windows 10 But, this process is identical in Linux, Mac OS X or FOSSEE OS on ARM.
Slide Number 4 Pre-requisites	To practice this tutorial, you should know to- Add components to a flowsheet Select thermodynamic packages Add material streams and specify their properties
Slide Number 5 Prerequisite Tutorials and Files	The prerequisite tutorials are available on our website. Spoken-tutorial.org. You can access these tutorials and all the associated files from this site. You should also have Scilab 5.02 (or higher) installed on your system.
Slide Number 6 Scilab CAPE-OPEN Unit Operation	First let us learn what is Scilab CAPE-OPEN Unit Operation. It is an unit operation implementation for which the calculations can be entered in Scilab. More information on this is given in the Additional reading material link of this tutorial.
Slide Number 7 Components: Water, methanol and Ethanol Property Package: Raoult’s Law Outlet Pressure: Average of Inlet Stream	We will develop a flowsheet to determine the product stream Temperature, Pressure, Molar flow rate and Molar enthalpy from a Mixer model created using Scilab.
Slide Number 8 Inlet Stream 1: Component: Pure Water Temperature: 300 K Pressure: 100000 Pa Mass flow: 10 kg/s Inlet Stream 2: Component: Pure Methanol Temperature: 305 K Pressure: 150000 Pa Mass flow: 15 kg/s Inlet Stream 3: Component: Pure Ethanol Temperature: 310 K Pressure: 200000 Pa Mass flow: 20 kg/s	Here we give Inlet Stream Conditions of the product stream.
	Now let me open DWSIM (Classic UI).
Cursor to Desktop DWSIM (Classic UI) >> Run as Administrator.	To open DWSIM, go to the Desktop. Right-click on DWSIM (Classic UI) and click Run as Administrator.
Point to Welcome to DWSIM window	Welcome to DWSIM window opens. Close this window.
File >> New Steady-state Simulation.	Now go to the File menu and select New Steady-state Simulation.
Point to Simulation Configuration Wizard window.	Simulation Configuration Wizard window appears.
Click on Next button.	At the bottom, click on the Next button.
Type Water in the Search tab ChemSep database >> Water	In the Compounds search tab, type Water. Select Water from the ChemSep database.
Type Methanol in the Search tab	Similarly, add Methanol.
Type Ethanol in the Search tab	Followed by Ethanol.
Click on Next.	And then click on the Next button at the bottom.
Point to Property Packages	The Property Packages window opens.
Property Packages >> Available Property Package Double click on Raoult’s Law	From Available Property Packages list, double-click on Raoult’s Law.
Click on Next.	Then click on the Next button at the bottom.
Point to System of Units	The next option after this, is System of Units.
System of Units >> SI	Under System of Units, select SI.
Click on Finish.	Click on the Finish button at the bottom.
Click on Maximize button.	Let us maximize the simulation window.
Cursor on the simulation window.	Let’s insert the feed streams that enter the Custom Mixer.
Point to Streams.	Go to Streams tab, at the bottom of the main simulation.
Click and drag Material Streams to the flowsheet	From the displayed list, drag and drop three Material Streams to the Flowsheet.
Click MSTR-000	Click on the first material stream named as MSTR-000
Type Water	Let’s change the name of this stream to Water.
	Now we will specify the Water stream properties.
Point to input data.	Go to Input Data.
Stream Conditions >> Flash Spec >> Temperature and Pressure (TP)	Under Stream Conditions tab, select Flash Spec as Temperature and Pressure (TP). By default, Temperature and Pressure should already be selected as Flash Spec.
Stream Conditions >>Temperature >> 300 K Press Enter	Change Temperature to 300 K and press Enter.
Stream Conditions >> Pressure >> 100000 Pa Press Enter	Change Pressure to 100000 Pa and press Enter.
Stream Conditions >> Mass Flow >> 10 kg/s Press Enter	Change Mass Flow to 10 kg/s and press Enter.
Input Data >> Compound Amounts	Now let us specify the Water stream compositions. For this, click on Compound Amounts tab under Input Data.
Basis >> Mole Fractions	Choose the Basis as Mole Fractions, if not already selected. By default, Mole Fractions is already selected as Basis.
Water: 1	Now for Water, enter the Amount as 1 and press Enter.
Methanol: 0	For Methanol, enter 0 and press Enter.
Ethanol: 0	For Ethanol, enter 0 and press Enter.
Click Accept Changes button	On the right, click on the Accept Changes button.
	Similarly, we will define the other two material streams.
Click MSTR-001	Click on the second material stream named MSTR-001.
Type Methanol	Let’s change the name of this stream to Methanol.
	Now we will specify the Methanol stream properties.
Stream Conditions >> Flash Spec >> Temperature and Pressure (TP)	Go to Input Data. Under Stream Conditions tab, select Flash Spec as Temperature and Pressure (TP).
Stream Conditions >>Temperature >> 305 K Press Enter	Change Temperature to 305 K and press Enter.
Stream Conditions >> Pressure >> 150000 Pa Press Enter	Change Pressure to 150000 Pa and press Enter.
Stream Conditions >> Mass Flow >> 15 kg/s Press Enter	Change Mass Flow to 15 kg/s and press Enter.
Input Data >> Compound Amounts	Now click on the Compound Amounts tab under Input Data.
Basis >> Mole Fractions	Choose Basis as Mole Fractions.
Water: 0	Now for Water, enter the Amount as 0 and press Enter.
Methanol: 1	For Methanol, enter 1 and press Enter.
Ethanol: 0	For Ethanol, enter 0 and press Enter.
Click Accept Changes button.	On the right, click on the Accept Changes button.
Click MSTR-002	Now, click on the third material stream named as MSTR-002.
Type Ethanol	Let’s change the name of this stream to Ethanol.
	Now we will specify the Ethanol stream properties.
Stream Conditions >> Flash Spec >> Temperature and Pressure (TP)	Go to Input Data. Under Stream Conditions tab, select Flash Spec as Temperature and Pressure (TP)
Stream Conditions >>Temperature >> 310 K Press Enter	Change Temperature to 310 K and press Enter.
Stream Conditions >> Pressure >> 200000 Pa Press Enter	Change Pressure to 200000 Pa and press Enter.
Stream Conditions >> Mass Flow >> 20 kg/s Press Enter	Change Mass Flow to 20 kg/s and press Enter.
Input Data >> Compound Amounts	Then under Input Data click on Compound Amounts tab.
Basis >> Mole Fractions	Choose Basis as Mole Fractions.
Water: 0	For Water, enter the Amount as 0 and press Enter.
Methanol: 0	For Methanol, enter 0 and press Enter.
Ethanol: 1	For Ethanol, enter 1 and press Enter.
Click Accept Changes button.	On the right side, click on the Accept Changes button.
	Now, let us insert another material stream that exits the custom mixer.
Click and Drag Material Stream to the flowsheet	To do that, let us drag one material stream to the flowsheet.
	Let us arrange the stream.
	We will leave that stream as unspecified.
Type Mixed Product	Then we will change the name of this stream to Mixed Product.
Cursor to CAPE-OPEN tab	At the bottom of the main simulation window, go to CAPE-OPEN tab.
Click and drag CAPE-OPEN Unit Operation to the flowsheet	Drag and drop CAPE-OPEN Unit Operation to the flowsheet area.
Cursor to CAPE-OPEN Unit Operation window	Add CAPE-OPEN Unit Operation window opens.
Point to SciLab Unit Operation. Click on OK	From the displayed list, select SciLab Unit Operation. Click on OK at the bottom.
Type Custom Mixer.	Let us change the name of this Unit Operation to Custom Mixer.
	Now, we will create the inlet and outlet connection ports for the Custom Mixer.
Click Custom Mixer	For this, click on Custom Mixer.
Click Open CAPE-OPEN Object Editor	From Property Editor window, click on Open CAPE-OPEN Object Editor.
Point to Scilab CAPE-OPEN Unit Operation window	Scilab CAPE-OPEN Unit Operation window opens.
Click on Ports tab.	Click on Ports tab.
Feed ports >> Add	Under Feed ports, there is an Add button at the bottom.
Click on the Add button	Click on Add button thrice to create three inlet ports for the three input material streams.
Product ports >> Add	Under Product ports, click on Add button at the bottom. This will create an outlet port for the output material stream.
Click on Close button.	Click on the Close button at the bottom.
Point to Property Editor Window	Go to Property Editor Window.
Go to Connections.	Under Connections, go to inlet tab.
Click on drop down arrow against Feed 1 Select Water.	Click on the drop-down against Feed 1 and select Water.
Click on drop down arrow against Feed 2 Select Methanol.	Next, click on the drop-down against Feed 2 and select Methanol.
Click on drop down arrow against Feed 3 Select Ethanol.	Next, click on the drop-down against Feed 3 and select Ethanol.
Click on the Outlet tab.	Now click on the Outlet tab.
Click on drop down arrow against Product 1 Select Mixed Product.	Click on the drop-down against Product 1 and select Mixed Product.
Point to all the connections.	All the connections now are completed. Now we will write the code to perform the computation.
Click on Open CAPE-OPEN Object Editor	Click on Open CAPE-OPEN Object Editor.
Click on SciLab tab.	Click on SciLab tab.
Cursor on the interface.	First we will get the feed properties of the material streams. Then we will write the calculation routines.
Type: f1=getFeedProp(1,"flow") f2=getFeedProp(2,"flow") f3=getFeedProp(3,"flow")	Type this code in the Script tab. This is to read the molar flow rate of the compounds from the inlet material streams.
Cursor to f1, f2 and f3 variables.	Here, f1, f2 and f3 are the variables. They store molar flow rate of the compounds from the inlet material streams.
Cursor to getFeedProp command	getFeedProp is the command used to read the specified feed property.
Cursor to 1, 2 and 3 feed port numbers	1, 2 and 3 are the feed port numbers in SciLab to which the material streams in DWSIM is connected.
Cursor to flow keyword	flow is the keyword. flow indicates that components in the streams, has to be stored in f1,f2,f3 in form of an array.
Type: h1=getFeedProp(1,"enthalpy") h2=getFeedProp(2,"enthalpy") h3=getFeedProp(3,"enthalpy")	Type this code in the Script tab. This is to read the molar enthalpy of the inlet streams from the added inlet material stream. Here, variables h1, h2 and h3 store the molar enthalpy of the added input material streams.
Cursor to enthalpy keyword	enthalpy is the keyword. It indicate that molar enthalpy of material streams has to be stored in h1, h2 and h3.
Type: p1=getFeedProp(1,"pressure") p2=getFeedProp(2,"pressure") p3=getFeedProp(3,"pressure")	Next, type this code. This is to read the pressure of the inlet streams from the added inlet material stream. Here, variables p1, p2 and p3 store the pressures of Water, Methanol and Ethanol streams.
Cursor to pressure keyword	pressure is the keyword. It indicates that the pressure of material streams has to be stored in the variables p1, p2 and p3.
	Now we will code the calculation routine
	First we will calculate the outlet pressure. For this let us consider the outlet pressure to be average pressure of all the 3 inlet streams.
p=(p1+p2+p3)/3	Now, type this code. Outlet pressure is calculated and stored in the variable p.
	Now we will calculate the molar flow rate of the compounds in the output stream.
f=f1+f2+f3	Type this code in the Script tab. Molar flow rate of compounds in the product stream is calculated. It is stored in the variable f in form of an array.
	Now we will calculate the total molar flow rate of the product stream.
totF=sum(f)	Type this code in the Script tab. Molar flow rate of product stream is calculated and stored in the variable totF.
	Now we will calculate the enthalpy of the product stream.
h=((h1*f1)+(h2*f2)+(h3*f3))/f	Type this code. Enthalpy of the product stream is calculated and stored in the variable h.
	Now we will pass the calculated variables to the Mixed Product material stream.
setProduct(1,totF,f/totF,"pressure",p,"enthalpy",h)	Type this code. setProduct indicates that, variables in the braces are to be passed to the stream in the product.
Click Test	At the bottom, click Test.
Point to the tabs.	Values stored and calculated in all the variables, are displayed in the Output tab.
Click Close button.	Click Close button at the bottom.
	Now we will run the simulation.
Click Solve Flowsheet	So, from the toolbar, click on Solve Flowsheet button.
Click Mixed Product	When the calculations are completed, click on the Mixed Product in the flowsheet.
Point to Property Editor Window Hover mouse at Input Data	Under Stream Conditions, check Temperature, Pressure, Molar Flow.
	Let's summarize.
Slide Number 9 Summary	In this tutorial, we have learnt to Create a custom unit operation using Scilab Calculate the Outlet pressure of product stream Calculate Molar flow rate and Enthalpy
Slide Number 10 Assignment Compounds: Water – 100 kmol/h Methanol – 100 kmol/h Pressure – 1.25 atm Property Package: Raoult’s Law Inlet Stream Temperature: 300 K Temperature Difference: 350 K Pressure Drop: 1.1 atm	As an assignment, Create a custom model for a heater to heat the given mixture of compounds. For different Inlet stream conditions.
Slide Number 11 About the Spoken Tutorial Project	Watch the video available at following link. http://spoken-tutorial.org/ It summarizes the Spoken Tutorial project.
Slide Number 12 Spoken Tutorial Workshops	The Spoken Tutorial Project Team Conducts workshops and Gives certificates. For more details, please write to us.
Slide Number 13 Forum Slide Do you have questions in this Spoken Tutorial? Please visit this site Choose the minute and second where you have the question. Explain your question briefly. Someone from the FOSSEE team will answer them.	Please post your times queries in this forum.
Slide Number 14 DWSIM Flowsheeting Project	The FOSSEE team coordinates conversion of existing flow sheets into DWSIM. We give honorarium and certificates. For more details, please visit this site.
Slide Number 15 TextBook Companion Project	The FOSSEE team coordinates coding of solved examples of popular books. We give honorarium and certificates. For more details, please visit this site.
Slide Number 16 Lab Migration Project	The FOSSEE team helps migrate commercial simulator labs to DWSIM. We give honorarium and certificates. For more details, please visit this site.
Slide Number 17 Acknowledgements	Spoken Tutorial and FOSSEE projects are funded by NMEICT, MHRD, Government of India.
Slide Number 18 Thanks	This tutorial is contributed by Kaushik Datta and Priyam Nayak. Thanks for joining.

Contributors and Content Editors

Kaushik Datta, Nancyvarkey