Difference between revisions of "STEMI-2017/C2/Introduction-to-Maestros-Device/English"
From Script | Spoken-Tutorial
PoojaMoolya (Talk | contribs) (Created page with "<div style="margin-left:-0.035cm;margin-right:0cm;">Topic: Introduction to the STEMI Kit - Maestros Device</div> <div style="margin-left:-0.035cm;margin-right:0cm;">Contribut...") |
Nancyvarkey (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | <div style="margin-left:-0.035cm;margin-right:0cm;">Topic: Introduction to the STEMI Kit - Maestros Device | + | <div style="margin-left:-0.035cm;margin-right:0cm;">Topic: Introduction to the STEMI Kit - Maestros Device |
| − | <div style="margin-left:-0.035cm;margin-right:0cm;">Contributor Name: Jerry David, STEMI Team, Coimbatore | + | <div style="margin-left:-0.035cm;margin-right:0cm;">Contributor Name: Jerry David, STEMI Team, Coimbatore |
| − | <div style="margin-left:-0.035cm;margin-right:0cm;">Reviewed by: Nancy Varkey, Spoken Tutorial Project, IIT Bombay | + | <div style="margin-left:-0.035cm;margin-right:0cm;">Reviewed by: Nancy Varkey, Spoken Tutorial Project, IIT Bombay |
Keywords: Maestros Device, SpO2 probe, BP cuff, ECG device, Clamp | Keywords: Maestros Device, SpO2 probe, BP cuff, ECG device, Clamp | ||
| Line 12: | Line 12: | ||
|| '''VISUAL CUE ''' | || '''VISUAL CUE ''' | ||
|| '''NARRATION''' | || '''NARRATION''' | ||
| + | |||
|- | |- | ||
|| Show Slide | || Show Slide | ||
| − | + | Maestros STEMI Kit | |
| − | + | ||
|| Hello and welcome to this tutorial on '''Maestros STEMI Kit.''' | || Hello and welcome to this tutorial on '''Maestros STEMI Kit.''' | ||
| + | |||
|- | |- | ||
|| Show Slide | || Show Slide | ||
| Line 22: | Line 23: | ||
Learning Objectives | Learning Objectives | ||
|| In this tutorial we will learn about | || In this tutorial we will learn about | ||
| − | * | + | * the components of '''Maestros STEMI Kit ''' |
| − | * | + | * and its purpose. |
| − | + | ||
|- | |- | ||
| Line 30: | Line 30: | ||
Hardware Requirements | Hardware Requirements | ||
| − | || To practise this tutorial, you will need | + | || To practise this tutorial, you will need '''Maestros STEMI Kit'''. |
| Line 36: | Line 36: | ||
|| Show image | || Show image | ||
|| The '''Hospital Model '''of this kit, consists of | || The '''Hospital Model '''of this kit, consists of | ||
| − | * | + | * An '''Android Tab''' in a metal casing |
| − | * | + | * '''Maestros Device''' with '''NIBP, ECG''' and '''SPO2 monitor''', all in a single device |
| − | * | + | * '''Wi-Fi Printer''' |
| − | * | + | * Trolley |
| − | * | + | * Power Strip |
| − | + | ||
|- | |- | ||
|| Show image | || Show image | ||
|| The '''Ambulance Model''' of this kit, consists of | || The '''Ambulance Model''' of this kit, consists of | ||
| − | * | + | * An '''Android Tab''' in a metal casing |
| − | * | + | * Along with '''NIBP, ECG '''and''' SPO2 monitor,''' all in a single device |
| − | * | + | * And a Power Strip |
The '''Ambulance Model''' does not have a '''Wi Fi Printer '''and is not mounted on a trolley. | The '''Ambulance Model''' does not have a '''Wi Fi Printer '''and is not mounted on a trolley. | ||
|- | |- | ||
|| Show image | || Show image | ||
| − | || In the '''Ambulance Model''' the metal casing of the Tab is mounted with a clamp. | + | || In the '''Ambulance Model''' the metal casing of the '''Tab''' is mounted with a clamp. |
|- | |- | ||
|| Show image | || Show image | ||
| − | || The HP Tablet is the data entry device. It has- | + | || The '''HP Tablet''' is the data entry device. It has- |
| − | * | + | * A '''power button''' on the the top of the '''Tab''' |
| − | * | + | * 2 '''micro USB ports''' and an '''HDMI port '''at the bottom |
| − | + | ||
| − | + | ||
| − | + | ||
|- | |- | ||
|| Show image | || Show image | ||
| − | || Out of the 2 '''USB ports''', the '''port''' | + | || Out of the 2 '''USB ports''', the '''port''' which is right-most, is used for charging the '''Tab'''. |
| + | |||
|- | |- | ||
|| Show image | || Show image | ||
| − | || The Android Tab can be charged either with a | + | || The '''Android Tab''' can be charged either with a |
| − | * | + | * standard '''Micro USB charger ''' |
| − | * | + | * or with the '''USB cable '''hanging out from the '''Maestros Device.''' |
| − | + | ||
|- | |- | ||
|| Continue same pic | || Continue same pic | ||
| − | || When this cable is used, the Tab derives power from the '''Maestros Device''' to charge itself. | + | || When this cable is used, the '''Tab''' derives power from the '''Maestros Device''' to charge itself. |
| − | This facility is provided so that the Tab need not be charged by plugging it to a power point. | + | This facility is provided so that the '''Tab''' need not be charged by plugging it to a power point. |
| − | Rather the device can be carried around while the Tab is being charged. | + | Rather the device can be carried around while the '''Tab''' is being charged. |
| + | |||
|- | |- | ||
|| Show image | || Show image | ||
| − | || The Tab is attached to the Maestros Device with a metal casing. | + | || The '''Tab''' is attached to the '''Maestros Device''' with a metal casing. |
| − | The Tab and the Maestros Device are separate devices. | + | The '''Tab''' and the '''Maestros Device''' are separate devices. |
But they act as a single unit because of the metal casing that surrounds them. | But they act as a single unit because of the metal casing that surrounds them. | ||
| + | |||
|- | |- | ||
|| Slide | || Slide | ||
| Line 104: | Line 102: | ||
5- Temp | 5- Temp | ||
| + | |||
|- | |- | ||
|| Show image | || Show image | ||
| − | || It has a | + | || It has a '''Power''' button along with the charging port on the left side. |
| + | |||
|- | |- | ||
|| Show image | || Show image | ||
| Line 112: | Line 112: | ||
| − | The '''Maestros Device''' also two greenish yellow indicator LEDs on its left side. | + | The '''Maestros Device''' also two greenish yellow indicator '''LEDs''' on its left side. |
| − | * | + | * one that lights up once the '''Maestros Device '''is switched on |
| − | * | + | * the other that lights up when the '''device''' is in charging mode |
|- | |- | ||
| Line 123: | Line 123: | ||
|| Now let’s look at the '''Non Invasive Blood Pressure '''unit. | || Now let’s look at the '''Non Invasive Blood Pressure '''unit. | ||
| − | The '''B.P cuff''' has two parts the '''B.P cuff cable''' and the '''extension cable'''. | + | The '''B.P cuff''' has two parts - the '''B.P cuff cable''' and the '''extension cable'''. |
|- | |- | ||
|| Show image | || Show image | ||
| Line 133: | Line 133: | ||
As mentioned earlier, this is located at the left bottom side of the '''Maestros Device.''' | As mentioned earlier, this is located at the left bottom side of the '''Maestros Device.''' | ||
| + | |||
|- | |- | ||
| | | | | | ||
|| Now we are all set to take the''' B.P.''' | || Now we are all set to take the''' B.P.''' | ||
| + | |||
|- | |- | ||
|| '''SpO2''' | || '''SpO2''' | ||
| Line 144: | Line 146: | ||
The '''SpO2 cable''' has two parts - | The '''SpO2 cable''' has two parts - | ||
| − | * | + | * the '''extension cable ''' |
| − | * | + | * and the '''SpO2 probe''' |
| − | + | ||
|- | |- | ||
|| Show image | || Show image | ||
|| Connect the '''extension cable''' with the''' SpO2 probe, '''as shown. | || Connect the '''extension cable''' with the''' SpO2 probe, '''as shown. | ||
| + | |||
|- | |- | ||
|| Show image | || Show image | ||
|| Snap the transparent cover into place to secure the connecting cables. | || Snap the transparent cover into place to secure the connecting cables. | ||
| + | |||
|- | |- | ||
|| Show image | || Show image | ||
| + | || The other end of the '''extension cable''' has to be connected to the '''Maestros Device'''. | ||
| − | |||
| − | |||
| − | |||
|- | |- | ||
|| Show image | || Show image | ||
|| Connect it to the port at the top left side of the '''Maestros Device.''' | || Connect it to the port at the top left side of the '''Maestros Device.''' | ||
| + | |||
|- | |- | ||
|| Show image | || Show image | ||
| Line 176: | Line 178: | ||
|- | |- | ||
|| Show image | || Show image | ||
| − | || ..to the '''ECG port '''at the top left side of the '''Maestros Device''' | + | || ..to the '''ECG port '''at the top left side of the '''Maestros Device''' as shown here. |
| − | + | ||
| − | as shown here. | + | |
|- | |- | ||
|| Show image | || Show image | ||
|| Secure the connection by tightening the screws on either side of the connector head. | || Secure the connection by tightening the screws on either side of the connector head. | ||
| + | |||
|- | |- | ||
|| | || | ||
|| Now we are all set to take an '''ECG'''. | || Now we are all set to take an '''ECG'''. | ||
| + | |||
|- | |- | ||
| − | || | + | || Summary slide |
|| Let us summarize. | || Let us summarize. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | In this tutorial, we have learnt - | ||
| + | * About the various units that come with the '''Maestros STEMI Kit''' | ||
| + | * And how to connect them with the '''Maestros Device'''. | ||
|- | |- | ||
|| Show STEMI INDIA slide | || Show STEMI INDIA slide | ||
|| '''STEMI INDIA''' | || '''STEMI INDIA''' | ||
| − | * | + | * was set up as a ‘not for profit’ organisation |
| − | * | + | * primarily to reduce delays in accessing appropriate care for heart attack patients |
| − | * | + | * and reducing deaths due to heart attacks. |
| − | + | ||
|- | |- | ||
| Show Spoken Tutorial Project Slide | | Show Spoken Tutorial Project Slide | ||
| − | | Spoken Tutorial Project, IIT Bombay | + | | Spoken Tutorial Project, IIT Bombay is funded by NMEICT, MHRD, Govt. of India. |
| − | For more details, please visit | + | For more details, please visit https://spoken-tutorial.org |
|- | |- | ||
| Show THANK YOU slide | | Show THANK YOU slide | ||
| This tutorial has been contributed by | | This tutorial has been contributed by | ||
| − | * | + | * STEMI INDIA |
| − | * | + | * and the Spoken Tutorial Project, IIT Bombay. |
Latest revision as of 22:13, 1 July 2020
Topic: Introduction to the STEMI Kit - Maestros Device
Contributor Name: Jerry David, STEMI Team, Coimbatore
Reviewed by: Nancy Varkey, Spoken Tutorial Project, IIT Bombay
Keywords: Maestros Device, SpO2 probe, BP cuff, ECG device, Clamp
| VISUAL CUE | NARRATION |
| Show Slide
Maestros STEMI Kit |
Hello and welcome to this tutorial on Maestros STEMI Kit. |
| Show Slide
Learning Objectives |
In this tutorial we will learn about
|
| Show Slide
Hardware Requirements |
To practise this tutorial, you will need Maestros STEMI Kit.
|
| Show image | The Hospital Model of this kit, consists of
|
| Show image | The Ambulance Model of this kit, consists of
The Ambulance Model does not have a Wi Fi Printer and is not mounted on a trolley. |
| Show image | In the Ambulance Model the metal casing of the Tab is mounted with a clamp. |
| Show image | The HP Tablet is the data entry device. It has-
|
| Show image | Out of the 2 USB ports, the port which is right-most, is used for charging the Tab. |
| Show image | The Android Tab can be charged either with a
|
| Continue same pic | When this cable is used, the Tab derives power from the Maestros Device to charge itself.
|
| Show image | The Tab is attached to the Maestros Device with a metal casing.
|
| Slide | The Maestros Device has 5 Ports
1 - Charging port 2 - ECG port 3 - BP port 4 - SpO2 port 5- Temp |
| Show image | It has a Power button along with the charging port on the left side. |
| Show image | And the ECG, BP & SpO2 port on the right side.
|
| NIBP
Show image |
Now let’s look at the Non Invasive Blood Pressure unit.
The B.P cuff has two parts - the B.P cuff cable and the extension cable. |
| Show image | First connect the B.P cuff cable to the extension cable. |
| Show image | Then connect the other end of the extension cable to the B.P port.
|
| Now we are all set to take the B.P. | |
| SpO2
Show image |
Next we will look at the SpO2 unit.
|
| Show image | Connect the extension cable with the SpO2 probe, as shown. |
| Show image | Snap the transparent cover into place to secure the connecting cables. |
| Show image | The other end of the extension cable has to be connected to the Maestros Device. |
| Show image | Connect it to the port at the top left side of the Maestros Device. |
| Show image | Now, we are all set measure the SpO2. |
| ECG
Show image |
Next, let us look at the ECG unit.
|
| Show image | ..to the ECG port at the top left side of the Maestros Device as shown here. |
| Show image | Secure the connection by tightening the screws on either side of the connector head. |
| Now we are all set to take an ECG. | |
| Summary slide | Let us summarize.
In this tutorial, we have learnt -
|
| Show STEMI INDIA slide | STEMI INDIA
|
| Show Spoken Tutorial Project Slide | Spoken Tutorial Project, IIT Bombay is funded by NMEICT, MHRD, Govt. of India.
|
| Show THANK YOU slide | This tutorial has been contributed by
|
