Difference between revisions of "OpenFOAM/C2/Installing-Running/English-timed"

From Script | Spoken-Tutorial
Jump to: navigation, search
Line 284: Line 284:
 
|-
 
|-
 
| 07:06
 
| 07:06
| You are now ready to start with '''OpenFoam'''
+
| You are now ready to start with OpenFoam.
  
 
|-
 
|-
 
| 07:10  
 
| 07:10  
| Now let me show you how to set up a '''working directory.'''
+
| Now, let me show you how to set up a '''working directory.'''
  
 
|-
 
|-
 
|07:14
 
|07:14
| Create a '''project or a user directory''' by the name '''run'''
+
| Create a project or a '''user directory''' by the name "run".
  
 
|-
 
|-
 
| 07:21
 
| 07:21
| Open a new '''command terminal'''. Let me drag this to the '''capture area''' again
+
| Open a new command terminal. Let me drag this to the 'capture area' again.
  
 
|-
 
|-
 
|07:36
 
|07:36
| In the '''Command Terminal''' type : '''mkdir (space) -p (space) $FOAM_RUN'''( Note That '''FOAM''' and '''RUN''' are in '''capital''') Press Enter
+
| In the '''Command Terminal''', type : '''mkdir (space) -p (space) $FOAM_RUN'''( note that 'FOAM' and 'RUN' are in capital). Press '''Enter'''.
  
 
|-
 
|-
 
| 07:55
 
| 07:55
|Copy the '''tutorial''' '''directory''' from openfoam distribution to '''run directory'''
+
|Copy the 'tutorial directory' from openfoam distribution to 'run directory'.
  
 
|-
 
|-
 
|08:01
 
|08:01
| By typing in the '''terminal ''' '''cp (space) -r (space) $FOAM_TUTORIALS (space) $FOAM_RUN '''
+
| By typing in the terminal'''cp (space) -r (space) $FOAM_TUTORIALS (space) $FOAM_RUN '''
  
 
|-
 
|-
 
| 08:18
 
| 08:18
| '''(''' note  that '''FOAM''' '''TUTORIAL' And RUN'' are capital''')''' '''and '''Press Enter
+
| (note  that 'FOAM', 'TUTORIAL' and 'RUN' are in capital) and Press '''Enter'''.
  
 
|-
 
|-
 
| 08:28
 
| 08:28
| Both the '''directories''' are now created.
+
| Both the directories are now created.
  
 
|-
 
|-
 
| 08:31
 
| 08:31
| To view the '''directories''' go to '''Places > Home Folder > OpenFOAM folder .'''
+
| To view the directories, go to '''Places > 'Home' folder > 'OpenFOAM' folder.'''
  
 
|-
 
|-
 
| 08:40
 
| 08:40
| You can see '''ttt-210''', Click on it
+
| You can see 'ttt-2.1.0', click on it.
  
 
|-
 
|-
 
| 08:44
 
| 08:44
|'''Run and tutorials'''
+
|'''Run''' and '''tutorials'''.
  
 
|-
 
|-
 
| 08:48
 
| 08:48
| Close this
+
| Close this.
  
 
|-
 
|-
 
| 08:51
 
| 08:51
let me switch back to the '''slides'''.
+
Let me switch back to the '''slide'''s.
  
 
|-
 
|-
 
| 08:56
 
| 08:56
| If some errors occurs during '''downloading''' '''OpenFOAM and Paraview'''
+
| If some errors occur during downloading OpenFOAM and Paraview  
  
 
|-
 
|-
 
| 09:00
 
| 09:00
| from '''Synaptic Package Manager''' or '''Ubuntu Debian pack from the website '''
+
| from '''Synaptic Package Manager''' or '''Ubuntu Debian pack''' from the website
  
 
|-
 
|-
 
| 09:05
 
| 09:05
| then you can '''download and install Openfoam''' and''' paraview '''from the''' source pack installation'''
+
| then you can download and install Openfoam and paraview from the '''source pack installation'''.
  
 
|-
 
|-
 
| 09:11
 
| 09:11
| For source pack installationGo to the '''Download''' page of '''openfoam website '''
+
| For source pack installation, go to the '''Download''' page of openfoam website.
  
 
|-
 
|-
 
| 09:18
 
| 09:18
| Now let me '''zoom''' this
+
| Now, let me zoom this.
  
 
|-
 
|-
Line 656: Line 656:
 
|-
 
|-
 
| 17:01
 
| 17:01
|| This is Rahul Joshi from IIT BOMBAY signing off.Thanks for joining.
+
|| This is Rahul Joshi from '''IIT Bombay''', signing off. Thanks for joining.
  
 
|}
 
|}

Revision as of 11:12, 9 December 2015

Time Narration
00:01 Hello and welcome to the spoken tutorial on Installing and running OpenFOAM and paraView.
00:08 In this tutorial, I will show you:
00:11 * How to install and run OpenFOAM , Paraview and
00:15 * How to solve a lid driven cavity case.
00:19 To record this tutorial, I am using:
  • Linux Operating system Ubuntu version 10.04
00:26 * OpenFOAM version 2.1.0
  • ParaView version 3.12.0
00:33 Note that OpenFOAM does not run on Windows platform.
00:37 Also note, OpenFOAM v 2.1.0 is compatible with linux version 10.04 and above.
00:45 To practice this tutorial, you should have some basic knowledge of Computational Fluid Dynamics
00:52 and Linux Commands.
00:55 Let me introduce you to OpenFOAM.
00:57 It is an Open Source Computational Fluid Dynamics Software.
01:02 It contains a wide range of solvers for solving CFD problems of 2 dimensional
01:08 as well as 3 dimensionals.
01:11 Now, let me introduce you to Paraview.
01:14 It is used for visualizing the results obtained in OpenFOAM.
01:19 'OpenFOAM and paraView' can also be installed through Synaptic package manager.
01:24 For Synaptic Package Manager, go to System > Administration > Synaptic Package Manager.
01:33 Type your password.
01:41 In the Search Box, type "OpenFOAM".
01:49 you can see openfoam as well as paraView.
01:54 Mark both of them for installation
02:06 and then click Apply to install.
02:12 The installation may take some time.
02:15 OpenFOAM and Paraview are installed.
02:21 For more details on Synaptic Package Manager,
02:25 please visit our website on this URL :

http://www.spoken-tutorials.org

02:29 Alternately, you can also install OpenFOAM and paraView from openfoam website on this url:

http://www.openfoam.com/download

02:38 Let me open up the browser.
02:45 In the browser URL, type : http://www.openfoam.com/download. Press Enter.
03:10 Scroll-down and go to Ubuntu Deb pack. Let me zoom this.
03:23 Go to Ubuntu Deb Pack Installation, click on it.
03:33 Let me zoom-out. Scroll-down and go to Installation.
03:40 From the first point of installation,
03:43 copy this command line and
03:46 paste it in the terminal window.
03:49 To open up a terminal window,
03:52 press Ctrl, Alt and t keys simultaneously on your keyboard or
03:59 go to Application > Accessories > Terminal.
04:06 Open up a terminal window.
04:10 Now, copy this command line and paste it in the terminal window.
04:20 Note that in place of "lsb_release -cs",
04:26 replace it with the name of Linux version that you are using.
04:30 Switch back to the browser. Above Installation, you can see different Ubuntu versions and the code names.
04:40 As I am using Linux 10.04,
04:45 I will replace "lsb _ release-cs" with "lucid".
04:53 Open up the terminal window.
04:55 I will replace this by "lucid". Press Enter.
05:04 Note that installation here is incomplete.
05:08 If you follow the steps in the
05:10 sequence 1-2-3 and 4, you will be done through installing open foam and paraview.
05:19 I have already installed OpenFOAM And Paraview through Synaptic Pacakage Manager some while ago.
05:27 Now we need to configure the installed software.
05:31 To do this, we need to edit the bash file.
05: 35 Open a new command terminal.
05:39 In the command terminal, type : "gedit ~/.bashrc". Press Enter.
05:50 This opens up the bash file.
05:54 Let me drag this to the capture area, scroll-down to the bottom of the bash file.
06:05 Now, switch back to the browser.
06:09 Scroll-down and go to User Configration.
06:13 Look at the second point.
06:15 Copy this line and paste it at the bottom of the bash file.
06:25 Save it and close the bash file.
06:31 Now, we need to test the installed application.
06:35 To do this, open up a new command terminal terminal.
06:40 Let me drag this to the capture area.
06:49 In the command terminal, type: "icoFoam" (Note that F here is capital) space -(dash) help
06:59 Press Enter.
07:03 A usage message will appear.
07:06 You are now ready to start with OpenFoam.
07:10 Now, let me show you how to set up a working directory.
07:14 Create a project or a user directory by the name "run".
07:21 Open a new command terminal. Let me drag this to the 'capture area' again.
07:36 In the Command Terminal, type : mkdir (space) -p (space) $FOAM_RUN( note that 'FOAM' and 'RUN' are in capital). Press Enter.
07:55 Copy the 'tutorial directory' from openfoam distribution to 'run directory'.
08:01 By typing in the terminal, cp (space) -r (space) $FOAM_TUTORIALS (space) $FOAM_RUN
08:18 (note that 'FOAM', 'TUTORIAL' and 'RUN' are in capital) and Press Enter.
08:28 Both the directories are now created.
08:31 To view the directories, go to Places > 'Home' folder > 'OpenFOAM' folder.
08:40 You can see 'ttt-2.1.0', click on it.
08:44 Run and tutorials.
08:48 Close this.
08:51 Let me switch back to the slides.
08:56 If some errors occur during downloading OpenFOAM and Paraview
09:00 from Synaptic Package Manager or Ubuntu Debian pack from the website
09:05 then you can download and install Openfoam and paraview from the source pack installation.
09:11 For source pack installation, go to the Download page of openfoam website.
09:18 Now, let me zoom this.
09:21 Scroll down and go toSource Pack Installation . Now click on this
09:32 Now scroll down and Go to Packs
09:38 Download these 2 tar files and save them. I have already downloaded and saved this 2 tar files
09:48 After this go to your home directory
09:51 To do this go to Places > home folder
09:56 Let me drag this to the capture area
10:00 In your home directory create a folder by a name of your choice
10:09 Let me put this as abc
10:15 Copy the 2 downloaded files in the folder that you have just created.
10:20 To do this , copy these two tar file And paste it into the folder you just created
10:37 Unzip or Untar these two files in the same folder. Extract here, this make take a couple of minutes
10:47 After this open a new command terminal
10:51 In this go to your home folder
10:54 type ls and press enter
11:00 Now go to the same folder in which you have untared the tar files
11:06 Now type cd ( space ) abc and press enter.
11:13 Now To view the contents inside abc type ls and press enter
11:24 Now go back to the Download page of OpenFOAM website for source pack installation
11:32 And Follow the steps given below for ubuntu distribution for OpenFOAM and Paraview
11:39 We need to compile OpenFOAM and Paraview here
11:43 It may take about 4 to 5 hours but this method always works .
11:50 Let us see how to Solve a problem in OpenFOAM with an example
11:56 Let me take a Lid Driven Cavity as an example.
11:59 It is a 2D problem where the upper plate moves with a certain velocity and other three sides of the plate are fixed
12:09 The type of Solver I am using here is for incompressible flow Called as -icofoam
12:17 Now Open a new command terminal again
12:22 i will drag this to the capture area
12:31 Type the path for the lid driven cavity problem
12:35 Note that this problem has already been set up in OpenFOAM
12:41 in the command terminal Type 'run'
12:45 This will direct you to the run directory of OpenFOAM-Press Enter
12:53 Now type cd (space) tutorial (Press Enter)
12:59 cd (space) incompressible (Press Enter)'
13:07 cd (space) icoFoam (Note that F here is capital) (Press Enter)
13:15 cd (space) cavity (Press Enter)
13:20 To view the content inside cavity type ls and press enter
13;27 You can see three files : 0,constant and system
13:33 Now we need to mesh the geometry
13:3 This can be done blockMesh utility of OpenFOAM
13:40 Open the terminal window type blockMesh (Note here that M is capital) Press Enter
13:52 Meshing has been done
13:56 Now run the solver 'icoFoam' by typing in the terminal icoFoam(Note that F here is capital) and Press Enter.
14:09 The iterations running can be seen in the terminal window
14:13 Here we notice we have completed the solving point.
14:16 To visualise these results let us open the paraview window.
14:21 To open paraView, type “paraFoam” in the terminal.(Note that 'F' is capital here) press Enter
14:42 This open ups the paraview window
14:45 Now On the left hand side,
14:48 In the object inspector menu,
14:50 Click Apply to view the geometry
14:54 You can see the Lid Driven Cavity
14:57 Now To see the boundary conditions, scroll down the object inspector menu and go to Mesh Parts
15:08 Uncheck Internel Mesh and click Apply
15:13 The geometry disappear.
15:15 Now to view the moving and fixedwalls
15:19 Check both the boxes and click Apply
15:30 Now uncheck the Moving wall and click Apply
15:35 You can now see three fixedwalls and the moving wall which just disappeared.
15:44 As we are done with running openfoam and paraview
15:49 In future we will come across more tutorials on solving and visualising the OpenFOAM result
15:56 Let me switch back to the slides
16:01 In this tutorial we learnt how to install:
16:05 OpenFOAM and Paraview through Synaptic Package Manager and the website solved a lid driven cavity.
16:12 As as Assignment, install OpenFOAM and Paraview
16:17 Watch the video available at this URL: http://spoken-tutorial.org/What_is_a_Spoken_Tutorial
16:21 It summarizes the Spoken Tutorial project.
16:24 If you do not have good bandwidth, you can download and watch it.
16:29 The Spoken Tutorial Project Team
16:31 -Conducts workshops using spoken tutorials
16:34 -Gives certificates to those who pass an online test
16:38 -For more details, contact st tutemail@gmail.com
16:45 Spoken Tutorials is part of Talk to a Teacher project,
16:49 It is supported by the National Mission on Education through ICT, MHRD, Government of India.
16:56 More information on the same is available at thisURL link http://spoken-tutorial.org/NMEICT-Intro
17:01 This is Rahul Joshi from IIT Bombay, signing off. Thanks for joining.

Contributors and Content Editors

Gaurav, PoojaMoolya, Pratik kamble, Sandhya.np14, Sneha