Difference between revisions of "OpenFOAM/C2/2D-Laminar-Flow-in-a-channel/English-timed"

From Script | Spoken-Tutorial
Jump to: navigation, search
Line 10: Line 10:
 
| 00:09
 
| 00:09
 
| In this tutorial, I will show you-  
 
| In this tutorial, I will show you-  
* '''2D geometry''' of '''channel'''  
+
  '''2D geometry''' of '''channel'''  
* '''Meshing''' the '''Geometry'''
+
  '''Meshing''' the '''Geometry'''
* '''Solving''' and '''Post Processing results''' in '''Paraview''' and
+
  '''Solving''' and '''Post Processing results''' in '''Paraview''' and
* '''Validation''' using '''analytic result'''.
+
  '''Validation''' using '''analytic result'''.
  
 
|-
 
|-
 
| 00:25
 
| 00:25
 
| To record this tutorial, I am using:
 
| To record this tutorial, I am using:
* '''Linux Operating system Ubuntu''' version 12.04.
+
  '''Linux Operating system Ubuntu''' version 12.04.
* '''OpenFOAM''' version 2.1.1
+
  '''OpenFOAM''' version 2.1.1
* '''ParaView''' version 3.12.0  
+
'''ParaView''' version 3.12.0  
  
 
|-
 
|-
Line 324: Line 324:
 
| 10:17
 
| 10:17
 
| Watch the video available at this URL:
 
| Watch the video available at this URL:
http://spoken-tutorial.org/What_is_a_Spoken_Tutorial
+
  http://spoken-tutorial.org/What_is_a_Spoken_Tutorial
It summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it.
+
  It summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it.
  
 
|-
 
|-
 
| 10:28
 
| 10:28
 
| The Spoken Tutorial Project team: * Conducts workshops using spoken tutorials.
 
| The Spoken Tutorial Project team: * Conducts workshops using spoken tutorials.
* Gives certificates to those who pass an online test.
+
  Gives certificates to those who pass an online test.
For more details, please write to: '''contact@spoken-tutorial.org'''  
+
  For more details, please write to: '''contact@spoken-tutorial.org'''  
  
 
|-
 
|-

Revision as of 15:28, 10 March 2017

Time Narration
00:01 Hello and welcome to the spoken tutorial on Simulating 2D Laminar Flow in a Channel using OpenFoam.
00:09 In this tutorial, I will show you-
 2D geometry of channel 
 Meshing the Geometry
 Solving and Post Processing results in Paraview and
 Validation using analytic result.
00:25 To record this tutorial, I am using:
 Linux Operating system Ubuntu version 12.04.
 OpenFOAM version 2.1.1
ParaView version 3.12.0 
00:39 Note that OpenFOAM version 2.1.1 is supported on ubuntu version 12.04.
00:45 Hence forth all the tutorials will be covered using OpenFOAM version 2.1.1 and ubuntu version 12.04.
00:56 As a prerequisite for this tutorial, you should know how to create geometry using OpenFOAM.
01:03 If not, please refer to the relevant tutorials on our website.
01:09 We simulate flow in a channel to determine flow development length along the downstream.

Channel flow problem description.

01:19 The boundary names and the inlet conditions are shown as in this figure.
01:26 The flow develpoment length is given by the formula L= 0.05 * Re * D.
01:32 'Re' which is the Reynolds number and 'D' which is the channel height.
01:37 Using the formula, the length of the channel comes out to be 5 meters and height is kept as 1 meter.
01:45 The Inlet velocity is 1 meter per second. And, we are solving this for a Reynolds number ( Re ) equal to 100.
01:53 This is a steady state problem . Therefore we are using a steady state incompressible solver for this case.
02:01 This is the file structure of our case. The folder should be created in the solver type that we choose. I have already created a folder in simpleFoam folder of incompressible flow solvers.
02:18 The folder is named as channel. Now, let me switch to the folder.
02:25 Copy 0, Constant and System folders of any other case, in the simpleFoam directory.
02:34 I have copied the file structure of the case pitzDaily.
02:38 Paste it inside the channel folder and make the necessary changes in the geometry, boundary faces and boundary condition.
02:48 Now, let me open the command terminal.
02:51 To do this, press Ctrl+Alt +t keys simultaneously on your keyboard.
02:57 In the terminal, type "run" and press Enter.
03:01 Now type cd space tutorials and press Enter.
03:08 Now type cd space incompressible and press Enter.
03:15 Type cd space simpleFoam and press Enter.
03:20 Now type cd space channel and press Enter.
03:28 Now, type "ls" and press Enter.
03:33 You will see three folders 0, Constant and system.
03:37 Now type cd space constant and press Enter.
03:48 Now type "ls" and press Enter.
03:52 In this, you will see the files containing properties of fluid and a folder named polymesh.
03:59 RASProperties contains Reynolds-averaged stress model.
04:03 transportProperties contains the transport model and kinematic viscosity that is (nu), in this case is set at 0.01 m²/s.
04:17 Now in terminal, type cd space polyMesh and press Enter. Now, type "ls" and press Enter.
04:30 You will see the blockMeshDict file here.
04:33 To open up the blockMeshDict file, in the terminal, type "gedit space blockMeshDict" and press Enter. Scroll down.
04:48 The geometry is in meters. So, the convertTometers is set to 1. Next, we have defined the vertices of the channel.
04:59 We have used a 100 X 100 mesh size here and cell spacing is kept as ( 1 1 1 ).
05:07 Next, we have setup the boundary conditions and their types which are inlet, outlet, top and bottom.
05:19 As this is a 2D Geometry, front and Back are kept as empty.
05:27 Also, this being a simple geometry, mergePatchPair and edges are to be kept empty. Close the blockMeshDict file.
05:38 In the command terminal, type cd space ..(dot dot) and press Enter.
05:44 Again, type cd space .. (dot dot) and press Enter.
05:49 Now. in the terminal, type cd space 0 (Zero) and press Enter. Now, type "ls" and press Enter.
05:58 This contains the intial boundary conditions and wall functions for the channel case.
06:05 It should contain various files such as epsilon, k, nut, nuTilda which are the wall functionsand 'p' , 'R' and capital 'U' which are initial conditions of the flow.
06:20 Let me switch back to the slides.
06:24 Calculate 'k' which is the turbulent kinetic energy from the formula given in the slide
06:29 where Ux, Uy and Uz are the velocity components in the x, y and z directions and U' ( dash ) = 0.05 times u actual.
06:43 Calculate epsilon from the formula given where epsilon is the rate of dissipation of turbulent energy, C mu is a constant and its value is 0.09.
06:56 And 'l' is the length of the channel. Let me minimize this.
07:02 Change only the boundary names in each of the above files.
07:07 Note that the values of nut, nuTilda, R are kept to default.
07:13 Rest of the files should contain the initial value for each of the boundary faces.
07:21 Now, in the terminal, type cd (space) ..(dot dot) and press Enter.
07:27 There are no changes to be done in the system folder.
07:31 Now we need to mesh the geometry. To do this, in the command terminal, type "blockMesh" and press Enter.
07:40 The Meshing is done. Now let me switch back to the slide.
07:45 The type of solver we are using here is SimpleFoam. It is a Steady-state solver for in-compressible and turbulent flows.
07:55 Let me minimize this.
07:56 In the command terminal, type "simpleFoam" and press Enter.
08:03 Iterations running will be seen in the command terminal.
08:07 Iterations running may take some time.
08:11 The iterations will stop once the solution is converged or it reaches its end time value.
08:16 To view the results in paraView, in the terminal,
08:20 type "paraFoam" and press Enter. This will open up the paraView window.
08:28 On the left hand side of the paraView window, click Apply. The geometry can be seen here.
08:35 On top of the active variable control menu, change the drop down menu from solid color to capital U.
08:50 You can see the initial state of velocity magnitude at inlet.. On top of the paraView window, click on theplay button of the VCR control.
09:00 you can see the final value of the velocity magnitude.
09:07 Also toggle on the color legend from the left hand side top of active variable control menu, click APPLY again.
09:16 Now go to Display, scroll down. You can see Rescale, click on it.
09:24 We can see that once the flow has fully developed, it attains a maximum uniform velocity at the center. Now, let me switch back to the slides.
09:36 The results obtained can be validated with the analytical solution for laminar flow in achannel which is u(max)=1.5 Uavg.
09:46 Using openFoam, we obtain a result of u(max) = 1.48 meters per second which is a good match.

This brings us to the end of the tutorial.

09:57 In this tutorial, we learnt the file structure of channel, obtained solution using steady state solver. Viewed the geometry in paraview and validation with analytic results.
10:08 As an assignment-

solve the problem for Reynold's Number equal to 1500 and validate it with the analytical result.

10:17 Watch the video available at this URL:
 http://spoken-tutorial.org/What_is_a_Spoken_Tutorial
 It summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it.
10:28 The Spoken Tutorial Project team: * Conducts workshops using spoken tutorials.
 Gives certificates to those who pass an online test.
 For more details, please write to: contact@spoken-tutorial.org 
10:42 Spoken Tutorials are part of Talk to a Teacher project. It is supported by the National Mission on Education through ICT, MHRD, Government of India.
10:52 More information on this mission is available at the following URL link:

http://spoken-tutorial.org/NMEICT-Intro

10:57 This is Rahul Joshi from IIT Bombay, signing off. Thanks for joining.

Contributors and Content Editors

DeepaVedartham, PoojaMoolya, Pratik kamble, Sandhya.np14