|| Welcome to the Spoken Tutorial on Slide Creation in LibreOffice Impress  

|| In this tutorial we will learn about: Slide Shows, Slide Transitions, Automatic Shows

|| You use Slide Shows to present slides before an audience.

|| Slide shows can be shown on desktops or projectors.

|| Presentations cannot be edited in the slide show mode.

|| Open the presentation '''Sample-Impress.odp.'''

|| Alternately, you can use the function key F5 to start the slide show.

|| Alternately right-click the mouse for the context menu and select '''Next'''.

|| To exit the slide show, right-click the mouse for the context menu. Here select '''End Show'''.

|| The '''Slide Show '''dialog box appears.

|| Under ''' Options''', check the boxes, ''' Mouse Pointer visible ''' and '''Mouse Pointer as Pen'''.''' '''

|| Click '''OK''' to close the dialog box.  

|| This option allows you to write or draw on the presentation while it is in slide show mode.

|| When you press the left mouse button, you can sketch with the pen.  

|| Let’s draw a tick mark against the first point.

||Use the sketch pen to draw a small diagram on an Impress slide.

|| Now left-click on the mouse button. The next slide is displayed.

|| You can also advance to the next slide, when you press the '''Space bar'''.

|| Let’s exit the slide show. Right-click for the context menu and click '''End Show'''.

|| Transitions are effects that are applied to slides as we move or transition From one slide to the next in a presentation.

|| Now, press the left mouse button. Drag and drop the slide in between slides three and four.

|| Press the CTRL+Z keys to undo this action.

|| You can add different transitions to each slide, in one go.

|| You can control transition speed by choosing the options from the Speed drop down menu.  

|| Under '''Modify Transitions''', click on the '''Sound '''drop-down box. Choose beam.

|| Under the '''Apply to selected slides,''' select '''wheel clockwise, 4 spokes'''.

|| Next, click on the '''Sound '''drop-down box. Choose '''Applause'''.

|| We have now learnt how to animate and add a sound effect to a slide transition.

|| In '''Transition type, '''select '''Checkerboard Down.'''

|| In the '''Speed '''drop-down, select '''Medium. '''

|| Check '''Loop Until Next Sound'''

 

|| Click the radio button ''' Automatically After'''

|| Select time as '''1sec'''

|| Click on ''' Apply to all Slides'''

|| Note, that clicking on the ''' Apply to all Slides  '''button applies the same transition for all the slides.  

|| From the Main pane, first click on '''Slide Sorter Tab'''.

|| Go to the '''Task '''pane.

|| Under  '''Slide Transitions''' go to the '''Advance slide '''option.

|| In the '''Automatically after '''field enter the time 2 seconds.

|| Go to the '''Task '''pane.  

||Under '''Slide Transitions''' go to the '''Advance slide '''option.

|| In the '''Automatically after '''field enter the time 3 seconds.

|| This brings us to the end of this tutorial. In this tutorial, we have learnt about; Slide shows, Slide Transitions, Automatic show

|| Add  A wheel clockwise,

||  2 spoke transition at medium speed, For the 2nd and 3rd slides, With a gong sound.  

||Watch the video available at the following link. It summarises the Spoken Tutorial project

||If you do not have good bandwidth, you can download and watch it

||The Spoken Tutorial Project Team Conducts workshops using spoken tutorials. Gives certificates for those who pass an online test

||For more details, please write to contact at spoken hyphen tutorial dot org

||Spoken Tutorial Project is a part of the Talk to a Teacher project. It is supported by the National Mission on Education through ICT, MHRD, Government of India

||More information on this Mission is available at spoken hyphen tutorial dot org slash NMEICT hyphen Intro

||This tutorial has been contributed by DesiCrew Solutions Pvt. Ltd. Thanks for joining