Difference between revisions of "GIMP/C2/Triptychs-In-A-New-Way/English-timed"

From Script | Spoken-Tutorial
Jump to: navigation, search
 
(7 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
{| border = 1
 
{| border = 1
 
 
|'''Time'''
 
|'''Time'''
 
 
|'''Narration'''
 
|'''Narration'''
  
 +
|-
 +
| 00:23
 +
|Welcome to '''Meet The GIMP'''.
  
 
|-
 
|-
| 00.23
+
| 00:25
|Welcome to Meet The GIMP. My name is Rolf steinort and I am recording this is Bremen, Northen Germany.  
+
| My name is Rolf Steinort and I am recording this in Bremen, Northern Germany.  
  
 +
|-
 +
| 00:30
 +
| I got an e-mail from Jeson in New York and he just stopped the show about Triptychs, to find a different way of doing it, before I started doing triptychs.
  
 
|-
 
|-
| 00.30
+
| 00:45
| I got an e-mail from Jeson in New York and he just stopped the show about Triptychs, to find a different way of doing it. Before I started doing triptychs.
+
|And he found a different way with using '''layer mask'''.  
  
 
|-
 
|-
| 00.45
+
| 00:50
|And he found a different way with using layer mask. And I think I should show you that in this tutorial.  
+
|And I think I should show you that in this tutorial.  
  
 
|-
 
|-
| 00.57
+
| 00:57
| I can't show you the image which Jeson used for doing Triptychs because he used images which are not freely available so I can't use them.  
+
| I can't show you the image which Jeson used for doing Triptychs because he used images which are not freely available, so I can't use them.  
  
 
|-
 
|-
| 01.10
+
| 01:10
|Using layer mask for doing Triptychs is very easy and I have modified his concept a bit about using a layer mask. I wonder why I didn't had that idea.  
+
|Using layer mask for doing Triptychs is very easy and I have modified his concept a bit about using a layer mask.  
  
 
|-
 
|-
| 01.25
+
| 01:21
 +
|I wonder why I didn't have that idea.  
 +
 
 +
|-
 +
| 01:25
 
| And I want to do a triptych with these three shots here.  
 
| And I want to do a triptych with these three shots here.  
  
 
|-
 
|-
| 01.31
+
| 01:31
|I want to have this image on the left side, this 2nd one in the middle and this one on the right side. I want to change these square frames to something which suits this image.  
+
|I want to have this image on the left side, this 2nd one in the middle and this one on the right side.  
  
 
|-
 
|-
| 01.49
+
| 01:42
 +
| I want to change these square frames to something which suits this image.  
 +
 
 +
|-
 +
| 01:49
 
| We will see how this works out.  
 
| We will see how this works out.  
  
 
|-
 
|-
| 01.53
+
| 01:53
|Now I can start making the Triptychs with these images here and I press tab to bring my tool box window into the foreground.   
+
|Now I can start making the Triptychs with these images here and I press '''tab''' to bring my toolbox window into the foreground.   
  
 +
|-
 +
|02:05
 +
| Click on '''File''' and select '''New''' to create a new image and we get the default value of width as 3400 and 1200 for height.
  
 
|-
 
|-
|02.05
+
|02:19
| Click on File and select New to create a new image and we get the default value of width as 3400 and 1200 for height. So I have three images of 1000 by 1000 and 100 pixels border between them.  
+
| So I have three images of 1000 by 1000 and 100 pixels border between them.  
  
 
|-
 
|-
|02.31
+
|02:31
|Lets see how that works out.   
+
|Let's see how that works out.   
  
 
|-
 
|-
| 02.36
+
| 02:36
|For getting this image into the new image, I drag the background layer of this image from toolbox to my new image here and you get here background copy.  
+
|For getting this image into the new image, I drag the 'Background' layer of this image from toolbox to my new image here and you get here 'Background copy'.  
  
 
|-
 
|-
| 02.54
+
| 02:54
|This was my left most image, so I rename it as Left and I press return after typing. So this image should be on the left side. And the next image should be on right side, so I pull the image in the same way and name it accordingly Right.  
+
|This was my left most image, so I rename it as "left" and I press return/Enter after typing.  
  
 
|-
 
|-
| 03.32
+
| 03:04
|And this is the third image and this will become my central window, so I pull this image over to the new image and rename this layer as Center.  
+
|So this image should be on the left side.  
  
 
|-
 
|-
| 03.49
+
| 03:08
|I make the right and central layers invisible and now I want to scale the left layer a bit down and when I zoom down a bit to say 10% you can see the borders of this layer and now the full frame of the image can be seen. And now I select the move tool so that I can move this image and adjust a bit.  
+
|And the next image should be on right side, so I pull the image in the same way and name it accordingly "right".  
  
 +
|-
 +
| 03:32
 +
|And this is the third image and this will become my central window, so I pull this image over to the new image and rename this layer as "center".
  
 
|-
 
|-
| 04.26
+
| 03:49
|The image is not moving because I have selected the center layer. So now I select the left layer and move it a position the bottle. I want to scale down this layer a bit, so I select the scale tool from the tool box and go to the tool info and click on aspect ratio and in preview I choose the image option. And now I  click into the layer, and pull the info window aside and reduce it from the corner.  
+
|I make the "right" and "central" layers invisible and now I want to scale the "left" layer a bit down and when I zoom down a bit to say 10%, you can see the borders of this layer and now the full frame of the image can be seen.  
  
 
|-
 
|-
| 05.09
+
| 04:16
 +
|And now I select the '''Move''' tool so that I can move this image and adjust a bit.  
 +
 
 +
|-
 +
| 04:26
 +
|The image is not moving because I have selected the center layer.
 +
 
 +
|-
 +
| 04:33
 +
| So, I select the '''left''' layer and move it and position the bottle.
 +
 
 +
|-
 +
| 04:39
 +
|I want to scale down this layer a bit, so I select the '''Scale''' tool from the toolbox and go to the tool info. and click on '''aspect ratio''' and in '''Preview''' I choose the '''Image''' option.
 +
 
 +
|-
 +
| 04:59
 +
| And now, I click into the layer, and pull the info window aside and reduce it from the corner.
 +
 
 +
|-
 +
| 05:09
 
|I think more or bit less.  
 
|I think more or bit less.  
  
 
|-
 
|-
| 05.15
+
| 05:15
 
|I can grab this image and I can position it where I want to and I think I should have put some guidelines on here.  
 
|I can grab this image and I can position it where I want to and I think I should have put some guidelines on here.  
  
 +
|-
 +
| 05:30
 +
|So, I zoom into the image by 100% and go to the top left corner.
  
 +
|-
 +
| 05:38
 +
|Now I pull the rulers down here for guidelines.
  
 
|-
 
|-
| 05.30
+
|05:43
|So I zoom into the image by 100% and go to the left top corner. Now I pull the rulers down here for guidelines. I wondered why I couldn’t move a ruler and here is an option move the active layer, by selecting it I can move the active layer.  
+
| I wondered why I couldn’t move a ruler and here is an option '''Move the active layer'''. By selecting it I can move the active layer.
  
 
|-
 
|-
|06.01
+
|06:01
|It's a nice option to protect the layers and I select the size of the frame as 100 on the right side and i go down and I set it 1100 and on right side I set it as 1100.  
+
| It's a nice option to protect the layers and I select the size of the frame as 100 on the right side and I go down and I set it 1100 and on right side I set it as 1100.  
  
 +
|-
 +
|06:31
 +
|This is the frame for my image.
  
 
|-
 
|-
|06.31
+
|06:34
|This is the frame for my image. Shift + Ctrl + E gives me the whole image and now I select the active layer option.  
+
| Shift + Ctrl + E gives me the whole image and now I select the '''active layer''' option.
 +
 +
|-
 +
| 06:43
 +
|And in '''Zoom Ratio''', I select 10%.
  
 
|-
 
|-
| 06.43
+
| 06:48
|And in zoom ratio I select 10%. I think I should select 13% and thats enough.
+
| I think, I should select 13% and that's enough.
  
 
|-
 
|-
| 06.59
+
| 06:59
|I click on scale tool and keep the aspect ratio and pull this scale window out of the frame. Now I scale this image.  
+
|I click on '''Scale''' tool and keep the aspect ratio and pull this '''Scale''' window out of the frame.  
  
 +
|-
 +
| 07:10
 +
|Now I scale this image.
  
 
|-
 
|-
| 07.13
+
| 07:14
|Now I have the frame to look where I want to place this image. And I think I should make it a bit smaller because I want to have the shads of glass here in the image.  
+
|Now I have the frame to look where I want to place this image.
  
 +
|-
 +
| 07:21
 +
| And I think I should make it a bit smaller because I want to have the shades of glass here, in the image.
  
 
|-
 
|-
|07.40
+
|07:40
|Now I click on scale and I get my scaled image.  
+
|Now I click on '''Scale''' and I get my scaled image.  
  
 
|-
 
|-
|07.49
+
|07:49
|For getting the frame around the image I just add a layer mask.  
+
|For getting the frame around the image, I just add a '''layer mask'''.  
  
 
|-
 
|-
| 08.01
+
| 08:01
|And I make my layer mask black i.e full transparency. And just click on add.  
+
|And I make my layer mask '''Black''' i.e '''full transparency'''.  
  
 +
|-
 +
| 08:07
 +
|And just click on '''Add'''.
  
 
|-
 
|-
| 08.13
+
| 08:13
| So now i select a rectangle inside the borders here and fill the rectangle with white. I pull the white colour over here and you can see that the bottle becomes visible and for completing the frame here, I just zoom into it. And I'll paint with white with irregular strokes on the layer mask.  
+
| So, now I select a rectangle inside the borders here and fill the rectangle with white.
  
 
|-
 
|-
| 08.44
+
| 08:23
|To do that I select the brush tool, go to the dialog here and I select here a soft brush for painting.  
+
| I pull the white colour over here and you can see that the bottle becomes visible and for completing the frame here, I just zoom into it.  
  
 
|-
 
|-
|09.01
+
| 08:36
| Before painting I have to de-select my selection by pressing Shift + Ctrl + A, and now I can start painting with white. White is selected
+
| And I will paint with white with irregular strokes on the layer mask.  
  
 
|-
 
|-
|09.16
+
| 08:44
|Now I paint with white here around and you see while I am painting white on the layer mask, I am revealing the image below. And the painting is irregular but it's ok.  
+
|To do that, I select the '''Brush''' tool, go to the dialog here and I select here a soft brush for painting.  
  
 
|-
 
|-
|09.40
+
|09:01
|Now I am selecting a different brush and I think this is better. I get a fuzzy corner. I should zoom into the image 100% so that you can see it.  
+
| Before painting, I have to de-select my selection by pressing Shift + Ctrl + A and now I can start painting with white.  
  
 
|-
 
|-
| 10.04
+
|09:13
|I get kind of the fuzzy border here and I will make it a bit more fuzzy in a moment by painting twice above it. And now you can see that the border is getting a little bit more irregular.  
+
|White is selected.
  
 
|-
 
|-
| 10.22
+
|09:16
| Perhaps this is not the right tool here but you can use different tools and now I want to sharpness in this image. You can check out that I am still working in the layer mask. You can check it here. The layer mask is selected with white here. So click on Filters, Blur, Gaussian blur and i select high blur count here and I think thats ok.  
+
|Now I paint with white here around and you see while I am painting white on the layer mask, I am revealing the image below.
  
 
|-
 
|-
| 11.03
+
|09:28
| And now i have really fuzzy border here around. So lets look at the  full image Shift + Ctrl + E
+
|And the painting is irregular but it's ok.
  
 
|-
 
|-
|11.17
+
|09:40
|I have the 1st part of my tryptych and I do the others in the same way.  
+
|Now, I am selecting a different brush and I think this is better.
  
 
|-
 
|-
| 11.26
+
|09:49
| I have finished with the other images and you can see here i have over painted over the rulers and i can do that here too. Now i want to remove the rulers and new way of doing that is to go to the image, Image Guides and here i can remove all guides. And i found out that i can do a new guide here and select the position numerically. Its wonderful to have this options.  
+
| I get a fuzzy corner.
  
 
|-
 
|-
| 12.08
+
|09:52
| The GIMP has so many options that you cant remember all of them. Go to View and de-select layer Boundry. I want to have this bottle a bit more up into the corner. I think there is bit more space here and little bit less here.  
+
| I should zoom into the image 100% so that you can see it.
  
 
|-
 
|-
| 12.30
+
| 10:04
| I think the right and the center image are here at the right corner. But I think this bottel should go up there. So i'll go out of full screen mode. I de-select the center and the right layer and concentrate on the left layer.  
+
|I get kind of fuzzy border here and I will make it a bit more fuzzy in a moment by painting twice above it.
  
 
|-
 
|-
| 12.54
+
| 10:16
| Now I need the rulers for guidance. So click on Image, Guides, New guide. And type in Horizontal position 100.  
+
| And now you can see that the border is getting a little bit more irregular.
  
 
|-
 
|-
| 13.10
+
| 10:22
| Again go to Image, Guides, New guide and select vertical position as 100.  
+
| Perhaps this is not the right tool here but you can use different tools and now I want to sharpen  this image.
  
 
|-
 
|-
| 13.20
+
| 10:35
|And now I select my move tool. Go to the options, select move the active layer and i just move this up here.  
+
| You can check out that I am still working in the layer mask.
  
 
|-
 
|-
| 13.37
+
| 10:41
|I think I have made a mistake so I undo the step by pressing Ctrl + z. and here you can see that the mask is selected. I want to move the layer. So now i select the image and i just pull it up and the mask moves with it. I found no way to lock the mask but I can correct that. I select the layer mask and pull the layer mask back to my corner here.  
+
| You can check it here.  
  
 
|-
 
|-
| 14.12
+
| 10:43
 +
| The layer mask is selected with white here.
 +
 
 +
|-
 +
| 10:47
 +
|So, click on '''Filters, Blur, Gaussian Blur''' and I select high blur count here and I think that's ok.
 +
 
 +
|-
 +
| 11:03
 +
| And now I have really fuzzy border here around.
 +
 
 +
|-
 +
| 11:10
 +
|So let's look at the  full image.  '''Shift + Ctrl + E'''.
 +
 
 +
|-
 +
|11:17
 +
|I have the 1st part of my triptych and I do the others in the same way.
 +
 
 +
|-
 +
| 11:26
 +
| I have finished with the other images and you can see here I have over painted over the rulers and I can do that here too.
 +
 
 +
|-
 +
| 11:39
 +
| Now I want to remove the rulers and new way of doing that is to go to the '''Image, Image Guides''' and here I can remove all guides.
 +
 
 +
|-
 +
| 11:54
 +
|And I found out that I can do a '''New Guide'''  here and select the position numerically.
 +
 
 +
|-
 +
| 12:03
 +
|Its wonderful to have this options.
 +
 
 +
|-
 +
| 12:08
 +
| The GIMP has so many options that you cant remember all of them.
 +
 
 +
|-
 +
| 12:14
 +
|  Go to '''View''' and de-select '''Layer Boundary'''.  
 +
 
 +
|-
 +
| 12:18
 +
| I want to have this bottle a bit more up into the corner.
 +
 
 +
|-
 +
| 12:23
 +
| I think there is bit more space here and little bit less here.
 +
 
 +
|-
 +
| 12:30
 +
| I think the "right" and the "center" image are here at the right corner.
 +
 
 +
|-
 +
| 12:36
 +
| But I think this bottle should go up there.
 +
 
 +
|-
 +
| 12:41
 +
|  So, I will go out of full screen mode,
 +
 
 +
|-
 +
| 12:45
 +
| I de-select the "center" and the "right" layer and concentrate on the "left" layer. 
 +
 
 +
|-
 +
| 12:54
 +
| Now I need the rulers for guidance.
 +
 
 +
|-
 +
| 12:58
 +
| So click on '''Image, Guides, New Guide''' and type in '''Horizontal''' position 100.
 +
 
 +
|-
 +
| 13:10
 +
| Again go to '''Image, Guides, New Guide''' and select '''vertical''' position as 100.
 +
 
 +
|-
 +
| 13:20
 +
|And now I select my '''Move''' tool. Go to the options, select '''Move the active layer''' and I just move this up here.
 +
 
 +
|-
 +
| 13:37
 +
|I think I have made a mistake, so I '''undo''' the step by pressing '''Ctrl + z''' and here you can see that the mask is selected.
 +
 
 +
|-
 +
| 13:49
 +
| I want to move the layer.
 +
 
 +
|-
 +
| 13:51
 +
| So, now I select the image and I just pull it up and the mask moves with it.
 +
 
 +
|-
 +
| 13:58
 +
|  I found no way to lock the mask but I can correct that.
 +
 
 +
|-
 +
| 14:04
 +
|  I select the layer mask and pull the layer mask back to my corner here.
 +
 
 +
|-
 +
| 14:13
 
|I think this looks better now.  
 
|I think this looks better now.  
  
 
|-
 
|-
| 14.19
+
| 14:19
 
| And now this image is finished with the help from Jeson in New York.  
 
| And now this image is finished with the help from Jeson in New York.  
  
 
|-
 
|-
| 14.28
+
| 14:28
| No this image isn't finished. The thing i normally dont forget but i always forget when i am recording because i have to think about such lot of other things than just making my image. I have again forgotten to save it.  
+
| No, this image isn't finished.  
 +
 
 +
|-
 +
| 14:32
 +
| The thing I normally don't forget but I always forget when I am recording because I have to think about such lot of other things than just making my image.  
 +
 
 +
|-
 +
| 14:47
 +
| I have again forgotten to save it.  
  
 
|-
 
|-
| 14.56
+
| 14:56
|Save it as jaegermeister.xcf, xcf contains all the layer information and i'll cut out all the stuff about rescaling for the web. .  
+
|Save it as jaegermeister.xcf, xcf contains all the layer information and i will cut out all the stuff about rescaling for the web.  
  
 
|-
 
|-
| 15.08
+
| 15:08
|You'll find a link to this file in the show notes at meetthegimp@org and if you want to leave a comment then please do that.  
+
|You will find a link to this file in the show notes at meetthegimp@org and if you want to leave a comment then please do that.  
 
   
 
   
 
|-
 
|-
| 15.18
+
| 15:18
| This is Hemant Waidande dubbing for the Spoken Tutorial Project.
+
| This is Hemant Waidande, dubbing for the Spoken Tutorial Project.

Latest revision as of 09:51, 29 April 2015

Time Narration
00:23 Welcome to Meet The GIMP.
00:25 My name is Rolf Steinort and I am recording this in Bremen, Northern Germany.
00:30 I got an e-mail from Jeson in New York and he just stopped the show about Triptychs, to find a different way of doing it, before I started doing triptychs.
00:45 And he found a different way with using layer mask.
00:50 And I think I should show you that in this tutorial.
00:57 I can't show you the image which Jeson used for doing Triptychs because he used images which are not freely available, so I can't use them.
01:10 Using layer mask for doing Triptychs is very easy and I have modified his concept a bit about using a layer mask.
01:21 I wonder why I didn't have that idea.
01:25 And I want to do a triptych with these three shots here.
01:31 I want to have this image on the left side, this 2nd one in the middle and this one on the right side.
01:42 I want to change these square frames to something which suits this image.
01:49 We will see how this works out.
01:53 Now I can start making the Triptychs with these images here and I press tab to bring my toolbox window into the foreground.
02:05 Click on File and select New to create a new image and we get the default value of width as 3400 and 1200 for height.
02:19 So I have three images of 1000 by 1000 and 100 pixels border between them.
02:31 Let's see how that works out.
02:36 For getting this image into the new image, I drag the 'Background' layer of this image from toolbox to my new image here and you get here 'Background copy'.
02:54 This was my left most image, so I rename it as "left" and I press return/Enter after typing.
03:04 So this image should be on the left side.
03:08 And the next image should be on right side, so I pull the image in the same way and name it accordingly "right".
03:32 And this is the third image and this will become my central window, so I pull this image over to the new image and rename this layer as "center".
03:49 I make the "right" and "central" layers invisible and now I want to scale the "left" layer a bit down and when I zoom down a bit to say 10%, you can see the borders of this layer and now the full frame of the image can be seen.
04:16 And now I select the Move tool so that I can move this image and adjust a bit.
04:26 The image is not moving because I have selected the center layer.
04:33 So, I select the left layer and move it and position the bottle.
04:39 I want to scale down this layer a bit, so I select the Scale tool from the toolbox and go to the tool info. and click on aspect ratio and in Preview I choose the Image option.
04:59 And now, I click into the layer, and pull the info window aside and reduce it from the corner.
05:09 I think more or bit less.
05:15 I can grab this image and I can position it where I want to and I think I should have put some guidelines on here.
05:30 So, I zoom into the image by 100% and go to the top left corner.
05:38 Now I pull the rulers down here for guidelines.
05:43 I wondered why I couldn’t move a ruler and here is an option Move the active layer. By selecting it I can move the active layer.
06:01 It's a nice option to protect the layers and I select the size of the frame as 100 on the right side and I go down and I set it 1100 and on right side I set it as 1100.
06:31 This is the frame for my image.
06:34 Shift + Ctrl + E gives me the whole image and now I select the active layer option.
06:43 And in Zoom Ratio, I select 10%.
06:48 I think, I should select 13% and that's enough.
06:59 I click on Scale tool and keep the aspect ratio and pull this Scale window out of the frame.
07:10 Now I scale this image.
07:14 Now I have the frame to look where I want to place this image.
07:21 And I think I should make it a bit smaller because I want to have the shades of glass here, in the image.
07:40 Now I click on Scale and I get my scaled image.
07:49 For getting the frame around the image, I just add a layer mask.
08:01 And I make my layer mask Black i.e full transparency.
08:07 And just click on Add.
08:13 So, now I select a rectangle inside the borders here and fill the rectangle with white.
08:23 I pull the white colour over here and you can see that the bottle becomes visible and for completing the frame here, I just zoom into it.
08:36 And I will paint with white with irregular strokes on the layer mask.
08:44 To do that, I select the Brush tool, go to the dialog here and I select here a soft brush for painting.
09:01 Before painting, I have to de-select my selection by pressing Shift + Ctrl + A and now I can start painting with white.
09:13 White is selected.
09:16 Now I paint with white here around and you see while I am painting white on the layer mask, I am revealing the image below.
09:28 And the painting is irregular but it's ok.
09:40 Now, I am selecting a different brush and I think this is better.
09:49 I get a fuzzy corner.
09:52 I should zoom into the image 100% so that you can see it.
10:04 I get kind of fuzzy border here and I will make it a bit more fuzzy in a moment by painting twice above it.
10:16 And now you can see that the border is getting a little bit more irregular.
10:22 Perhaps this is not the right tool here but you can use different tools and now I want to sharpen this image.
10:35 You can check out that I am still working in the layer mask.
10:41 You can check it here.
10:43 The layer mask is selected with white here.
10:47 So, click on Filters, Blur, Gaussian Blur and I select high blur count here and I think that's ok.
11:03 And now I have really fuzzy border here around.
11:10 So let's look at the full image. Shift + Ctrl + E.
11:17 I have the 1st part of my triptych and I do the others in the same way.
11:26 I have finished with the other images and you can see here I have over painted over the rulers and I can do that here too.
11:39 Now I want to remove the rulers and new way of doing that is to go to the Image, Image Guides and here I can remove all guides.
11:54 And I found out that I can do a New Guide here and select the position numerically.
12:03 Its wonderful to have this options.
12:08 The GIMP has so many options that you cant remember all of them.
12:14 Go to View and de-select Layer Boundary.
12:18 I want to have this bottle a bit more up into the corner.
12:23 I think there is bit more space here and little bit less here.
12:30 I think the "right" and the "center" image are here at the right corner.
12:36 But I think this bottle should go up there.
12:41 So, I will go out of full screen mode,
12:45 I de-select the "center" and the "right" layer and concentrate on the "left" layer.
12:54 Now I need the rulers for guidance.
12:58 So click on Image, Guides, New Guide and type in Horizontal position 100.
13:10 Again go to Image, Guides, New Guide and select vertical position as 100.
13:20 And now I select my Move tool. Go to the options, select Move the active layer and I just move this up here.
13:37 I think I have made a mistake, so I undo the step by pressing Ctrl + z and here you can see that the mask is selected.
13:49 I want to move the layer.
13:51 So, now I select the image and I just pull it up and the mask moves with it.
13:58 I found no way to lock the mask but I can correct that.
14:04 I select the layer mask and pull the layer mask back to my corner here.
14:13 I think this looks better now.
14:19 And now this image is finished with the help from Jeson in New York.
14:28 No, this image isn't finished.
14:32 The thing I normally don't forget but I always forget when I am recording because I have to think about such lot of other things than just making my image.
14:47 I have again forgotten to save it.
14:56 Save it as jaegermeister.xcf, xcf contains all the layer information and i will cut out all the stuff about rescaling for the web.
15:08 You will find a link to this file in the show notes at meetthegimp@org and if you want to leave a comment then please do that.
15:18 This is Hemant Waidande, dubbing for the Spoken Tutorial Project.

Contributors and Content Editors

Krupali, Minal, PoojaMoolya, Priyacst, Sandhya.np14