From Script | Spoken-Tutorial
Revision as of 17:03, 23 March 2017 by Pratik kamble (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Time Narration
00:01 Dear friends, welcome to the spoken tutorial on Using File Descriptors.
00:08 In this tutorial, we will learn to:
00:11 Assign an output file descriptor
00:14 Assign an input file descriptor
00:17 Close the file descriptor (fd)
00:19 with the help of some examples.
00:23 To follow this tutorial, you should have knowledge of Shell Scripting in BASH.
00:29 If not, for relevant tutorials, please visit our website which is as shown.
00:35 For this tutorial, I am using:
00:38 Ubuntu Linux 12.04 Operating System
00:43 GNU BASH version 4.2
00:46 Please note, GNU Bash version 4 or above is recommended for practice.
00:54 Let us start with an introduction.
00:56 We have already studied about file descriptors in the previous tutorial.
01:02 0, 1 and 2 are the standard file descriptors for stdin, stdout and stderr.
01:15 File descriptors are used for i/o redirection.
01:20 The syntax to assign a file descriptor to an output file is:
01:25 exec [File descriptor] greater than symbol filename
01:31 Let us see an example.
01:33 I have a code file with the name fdassign dot sh.
01:43 The first line is the shebang line.
01:49 The "exec" command replaces the current shell process.
01:56 It will be executed in the place of the current shell without creating a new process.
02:04 We know that 0, 1, and 2 are standard file descriptors.
02:09 For any newly opened file, we have additional file descriptors from 3 to 9.
02:19 Here, 3 is the file descriptor.
02:22 This will write the output to the output dot txt file.
02:30 The string "Welcome to BASH learning" is sent to the file output dot txt.
02:36 This is done via file descriptor 3.
02:42 This is similar to redirecting a string to a file.
02:49 Each new string will be appended to the file.
02:52 For example:
02:54 We will append the current system date to the output dot txt file.
03:00 The syntax is: date SPACE greater-than symbol ampersand sign 3.
03:13 Here, we close the file descriptor.
03:16 After this line, the descriptor cannot write anything to the output dot txt file.
03:23 Let us execute the code and see the output.
03:26 Open the terminal using CTRL+ALT+T keys.
03:34 Type: chmod space plus x space fdassign dot sh
03:41 Type: dot slash fdassign dot sh
03:46 Let us check the output now by typing cat space output dot txt.
03:56 We can see that the string "Welcome to BASH learning" and the current system date is displayed.
04:05 Let us go back to the editor.
04:11 Now I will type echo at the end, after the descriptor is closed.
04:17 Type: echo space within double quotes Hi after quotes space greater than symbol ampersand sign 3
04:31 Click on Save.
04:35 Let us execute the script once again and see what happens.
04:38 On the terminal, press the up-arrow key twice, recall the previous command dot slash fdassign dot sh.
04:50 press Enter.
04:52 We see an error:
04:55 "Bad file descriptor".
04:58 Let us fix this error.
05:00 Come back to the editor.
05:03 I will cut the last line of code and paste it below the date command.
05:11 Click on Save.
05:13 Let us execute the code once again, on the terminal.
05:19 Recall the previous command dot slash
05:24 press Enter.
05:26 Now let us open the output dot txt file.
05:29 Type: cat space output dot txt
05:41 We can see the output.
05:43 The string "Hi" is displayed at the end.
05:49 Now we will assign the file descriptor to the input file.
05:54 Let us see an example.
05:56 I have a file named fdread dot sh.
06:03 Let us go through it.
06:07 This is the 'exec' command.
06:13 Here we will read the file output dot txt.
06:19 The line exec 3 lesser than symbol output dot txt will open the file for reading.
06:30 'cat' command will display the content of the file.
06:35 And finally, we close the file descriptor.
06:39 Now, let us execute this shell script.
06:42 On the terminal, let me clear the prompt.
06:47 Type: chmod space plus x space fdread dot sh
06:55 Type dot slash fdread dot sh
07:01 We can see the output on the terminal.
07:05 The content of output dot txt file is displayed.
07:10 This brings us to the end of this tutorial.
07:13 Come back to the slides.
07:16 Let us summarize. In this tutorial, we learned to:
07:19 Assign the output file descriptor
07:22 Assign the input file descriptor
07:26 Close the file descriptor.
07:28 As an assignment:
07:30 Try to append a few lines to a file test dot txt using file descriptors;
07:36 Display the contents of the file using file descriptors.
07:41 Watch the video available at the link shown below.
07:45 It summarizes the Spoken-Tutorial project.
07:48 If you do not have good bandwidth, you can download and watch it.
07:53 The Spoken Tutorial Project team: Conducts workshops using spoken tutorials.
07:58 Gives certificates to those who pass an online test.
08:02 For more details, please write to
08:10 Spoken Tutorial Project is a part of the Talk to a Teacher project.
08:14 It is supported by the National Mission on Education through ICT, MHRD, Government of India.
08:22 More information on this mission is available at the link shown below
08:28 The script has been contributed by FOSSEE and Spoken-Tutorial teams.
08:33 This is Ashwini Patil from IIT Bombay, signing off.
08:37 Thank you for joining.

Contributors and Content Editors

Gaurav, PoojaMoolya, Pratik kamble, Sandhya.np14