Difference between revisions of "Apps-On-Physics/C3/Interference-and-Diffraction/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
(Created page with "{|border=1 |- || '''Visual Cue ''' || '''Narration''' |- || '''Slide Number 1 ''' '''Title Slide''' || Welcome to the Spoken Tutorial on '''Interference and Diffraction'''....")
 
Line 55: Line 55:
 
|| In this tutorial we will use,
 
|| In this tutorial we will use,
  
Interference of Light at a Double Slit  
+
'''Interference of Light at a Double Slit'''
  
 
and '''Diffraction of Light by a Single Slit Apps'''.
 
and '''Diffraction of Light by a Single Slit Apps'''.
Line 119: Line 119:
 
|| As the wavelength increases, distance between dark and bright fringes increases.
 
|| As the wavelength increases, distance between dark and bright fringes increases.
  
|-
 
|| Point to the '''Spacing between slit '''and '''Angle '''slider.
 
|| Below the wavelength slider there are two more sliders.
 
 
These slider are '''Spacing between slit '''and '''Angle'''.
 
 
|-
 
|| Drag the '''Spacing between slit '''slider.
 
 
Point to the slit in the yellow panel.
 
|| Let us now drag the '''Spacing between slit '''slider.
 
 
Observe the increase in the spacing between the slit.
 
  
 
|-
 
|-
 
|| Drag the '''Angle''' slider to show the changes.
 
|| Drag the '''Angle''' slider to show the changes.
|| Drag the '''Angle''' slider here we can change the angle 0 degrees to 90 degrees.
+
||Next Drag the '''Angle''' slider here we can change the angle from 0 degrees to 90 degrees.
  
 
|-
 
|-
Line 245: Line 232:
  
 
Show the rearranged equation in the text-box.('''α <nowiki>= sin</nowiki><sup>-1</sup>(kλ/d)''').
 
Show the rearranged equation in the text-box.('''α <nowiki>= sin</nowiki><sup>-1</sup>(kλ/d)''').
|| To do so we can rearrange the equation given in the interface as
+
|| To do so we can rearrange the equation given in the interface  
  
 
'''α <nowiki>= sin</nowiki><sup>-1</sup>(kλ/d)'''
 
'''α <nowiki>= sin</nowiki><sup>-1</sup>(kλ/d)'''
 
|-
 
||
 
|| Let us substitute the values into the formula.
 
  
 
|-
 
|-
Line 279: Line 262:
 
Take the value of wavelength and spacing between slit as shown on interface.
 
Take the value of wavelength and spacing between slit as shown on interface.
  
Substitute the values into the formula.
+
Next substitute the values in the formula.
  
 
The calculated value of angle of first maxima is  
 
The calculated value of angle of first maxima is  
Line 329: Line 312:
 
|| This '''App''' shows the setup of diffraction through a single slit experiment.
 
|| This '''App''' shows the setup of diffraction through a single slit experiment.
  
This set up is also known as '''Fraunhofer Diffraction at a single slit'''.
+
This set up is also known as '''Fraunhofer's Diffraction at a single slit'''.
  
 
|-
 
|-
Line 497: Line 480:
  
 
Point to the formula and also both angle and wavelength.
 
Point to the formula and also both angle and wavelength.
|| Here, angle is directly proportional to the wavelength.
+
|| Here, the angle is directly proportional to the wavelength.
  
 
|-
 
|-
Line 524: Line 507:
 
'''Assignment'''
 
'''Assignment'''
  
For each maxima tabular the value of relative intensity from the App.
+
For each maxima tabulate the value of relative intensity from the App.
  
 
Explain the diffraction pattern  
 
Explain the diffraction pattern  
|| For each maxima tabular the value of relative intensity from the App.
+
|| For each maxima tabulate the value of relative intensity from the App.
  
 
Explain the diffraction pattern
 
Explain the diffraction pattern
Line 541: Line 524:
 
|-
 
|-
 
||  
 
||  
|| Let us summarized.
+
|| Let us summarize.
 
|-
 
|-
 
|| '''Slide Number 12'''
 
|| '''Slide Number 12'''

Revision as of 16:33, 22 June 2020

Visual Cue Narration
Slide Number 1

Title Slide

Welcome to the Spoken Tutorial on Interference and Diffraction.
Slide Number 2

Learning objective

At the end of this tutorial you will be able to,
  • Verify the relation between wavelength and relative intensity.
  • Find the relation between slit width, maxima and minima.
  • Calculate the angle for the given maxima.
  • Interpret diffraction intensity profile.
  • Verify the relation between wavelength and angle.


Slide Number 3

System Requirements

Here I am using,

Ubuntu Linux OS version 16.04

Firefox Web Browser version 62.0.3

Slide Number 4

Pre-requisites

https://spoken-tutorial.org/

To follow this tutorial,

learner should be familiar with Apps on Physics.

For the Pre-requisites tutorials please visit this site.

Point to the file in the downloads folder I have already downloaded Apps on Physics to my Downloads folder.
Slide Number 5

Apps on Physics

In this tutorial we will use,

Interference of Light at a Double Slit

and Diffraction of Light by a Single Slit Apps.

Right click on doubleslit_en.htm file.

Select the Open With Firefox web Browser option.

Cursor on the App.

Right click on doubleslit_en.htm file.

Select the Open With Firefox web Browser option.

App opens in the browser.

Point to the set-up. The App shows Young’s double slit experiment for the interference pattern.
Point to the slit and semicircular black colour screen. The setup includes a slit and a semicircular screen.
Point to the Wavelength. On the green panel we can change the wavelength of the source light.
Cursor on the Wavelength slider.

Drag the Wavelength slider.

Here the range of the wavelength is from 380 nanometer to 780 nanometer.

This is the range of visible spectrum.

Enter value 650 nm and show. We can also enter the value of wavelength in the text-box.
Cursor on the interface. Let us see how change in wavelength changes the interference pattern.
Drag the Wavelength slider to 380 nm. Drag the Wavelength slider to 380 nm.
Click on Intensity profile radio button. Click on Intensity profile radio button at the bottom of the green panel.
Drag the Wavelength slider.

Point the cursor on the graph.

Drag the Wavelength slider slowly towards higher wavelength.

Observe the graph showing dark and bright fringes in the intensity profile.

Cursor on the graph. As the wavelength increases, distance between dark and bright fringes increases.


Drag the Angle slider to show the changes. Next Drag the Angle slider here we can change the angle from 0 degrees to 90 degrees.
Point the cursor to show the movement of white arrows Note that as we change the angle, white arrows shifts their position.
Drag the Angle slider and point to show the shift in the graph. This shift is also shown in the graph.
Scroll down. Scroll down the screen.
Point to show the condition for maxima and minima Here the conditions for maxima and minima are given.

For more details please read the additional material provided in this tutorial.

Press F5 key on the keyboard to restart the App. Press F5 key on the keyboard to reset the App.
Drag the slider of Spacing between the slit to 2000. Scroll up and increase the spacing between the slit to 2000 nm.
Click on the Maxima drop down.

Move the cursor to show all the values.

Now click on the Maxima drop down.

Here we will see more options for the k value.

Click on the Minima drop down. Click on the Minima drop down.
Point to first minima(k=1). Note that the first minima is formed at 8.6 degrees.
Click on the second minima(k=2). Click on the second minima that is k=2.
Point to show both screen and graph. The white arrows shift to the second minima in both screen and graph.
Point to show the Relative intensity. Here the Relative intensity changes to zero(0).

Zero indicates dark fringe.

The waves superimpose and are out of phase to give zero intensity.

This is destructive interference.

Click on Intensity profile radio button. Click on the Intensity profile radio button.
Point to the red point on the intensity profile graph. Here note that the red points indicate zero intensity.
Click on Maxima drop down. Select k=3. Now click on Maxima drop down and select k=3.
Point to the red point.

Point the cursor to Relative intensity.

The red point has shifted to the third peak.

The Relative intensity has changed to 1.

Here the waves superimpose to form a wave with maximum intensity.

This is constructive interference.

This constructive interference results in a bright fringe.

Click on Interference pattern radio button. Click on Interference pattern radio button at the bottom of the green panel.
Cursor on the graph. Note that the interference graph shows equally spaced dark and bright fringes.

Therefore the value of relative intensity only shows 0 and 1.

Press F5 key on the keyboard. Press F5 key on the keyboard to reset the App.
Cursor on the interface. Let us calculate the value of angle for first maxima.
Point to Condition for maxima formula.

Show the rearranged equation in the text-box.(α = sin-1(kλ/d)).

To do so we can rearrange the equation given in the interface

α = sin-1(kλ/d)

Slide Number 6

Angle

α = sin-1(kλ/d)

k=1

λ= 600 nm

d = 1000 nm

α = sin-1(kλ/d)

= sin-1(1*600/1000)

= sin-1(600/1000)

= sin-1(3/5)

= 36.86°

Take the value of k as 1 since we have to calculate the angle for the first maxima.

Take the value of wavelength and spacing between slit as shown on interface.

Next substitute the values in the formula.

The calculated value of angle of first maxima is

36.86 degree.

Let us compare with the value shown in the App.

Click on Maxima drop down.

Select k=1.

Click on the Maxima drop down and select k=1.
Cursor on the angle next to k=1. Observe that the value of the angle next to K=1 is 36.9 degrees.

The value is comparable with the calculated value.

Slide Number 7

Assignment

Change the Spacing between slits to 3500 nm.

Calculate the angle of fourth and fifth maxima.

As an Assignment

Change the Spacing between slits to 3500 nm.

Calculate the angle of fourth and fifth maxima.

Let us move on to the next App.
Right click on singleslit_en.htm file and select the option Open with Firefox Web browser.

Cursor on the title.

Follow the same steps as shown earlier while opening the App.

The Diffraction of Light by a Single Slit opens on the screen.

Cursor on the simulation interface. This App shows the setup of diffraction through a single slit experiment.

This set up is also known as Fraunhofer's Diffraction at a single slit.

Scroll down and point the cursor on the formulas. scroll down to see the conditions for maxima and minima.
Scroll up.

Select Intensity profile radio button.

Scroll up and select Intensity profile radio button.
Point the cursor on the Intensity profile graph. Observe that, only one central bright region is seen.

This intensity decreases as we move away from the center.

Click on Width of slit and enter 3000 nm. In the green panel, click on the Width of slit text-box and enter 3000 nm.
Cursor on the screen.

Point to bright and dark fringes.

Observe that a number of alternate dark and bright fringes are formed
Click on the Maxima drop down.

Cursor on the 0 degrees in the drop down.

Point to the relative intensity.

Now click on the Maxima drop down.

Observe that the central maxima is at 0 degrees.

It shows Relative intensity as 1. This is the maximum intensity.

Select K=1 from the Maxima drop down. From the Maxima drop down select k=1.
Point to Relative intensity value. Here the Relative intensity decreases from 1 to 0.0472.
Click on Maxima drop down.

Select K=2.

Again click on Maxima drop down and select k=2.
Point to Relative intensity value. The Relative intensity decreases to 0.0165.
Click on Minima drop down and select K=2. Know Click on the Minima drop down and select k=2.
Point to Relative intensity value. The value of Relative intensity is shown as 0.
Click on Minima drop down and select K=4 Click on Minima drop down and select k=4.
Point to Relative intensity value. Note that for every dark fringe the value of relative intensity will remain zero.
Here I have made the table to show the relative intensity for maxima and minima.
Slide Number 8

Tabular Column

Table is given at the end.

Observe the relative intensity for maxima.


The Relative intensity decreases as we move away from central region.

For the each minima, we have seen that the value remains zero for the relative intensity.

Drag the slider of Wavelength to its lowest.

Cursor on the voilet light.

Drag the Wavelength slider to its highest value that is to 780 nm.

This is the region of red light.

Click on the Maxima drop down.

Move the cursor through the drop down.

Next click on Maxima drop down.

Here we see four bright fringes.

Drag the slider of Wavelength to its highest.

Cursor on the red light.

Next drag the slider of Wavelength to its lowest value that is to 380 nm.

This is the region of violet light.

Click on the Maxima drop down.

Move the cursor through the drop down.

Now click on the Maxima drop down.

Here we can see eight positions for bright fringes.

Cursor on the interface. This happens because violet light refracts more than red light.

Hence we see more number of bright fringes for violet light.

Drag the Wavelength slider to 520 nm. Drag the Wavelength slider to 520 nm.
Click on Maxima drop down. Click on Maxima drop down and select first bright fringe.
Point to the angle next to k=1. Here the first bright fringe is formed at an angle of 14.4 degrees.
Drag Wavelength slider to 720 nm. Again drag the slider of Wavelength to 720 nm
Click on the Maxima drop down.

Select k=1.

Click on the Maxima drop down and select K=1.
Point to the angle next to k=1. Here the first bright fringe is formed at an angle of 20.1 degrees.

Hence we conclude that if we increase the wavelength, angle also increases.

Scroll down the screen. Scroll down the screen.

This is shown in the formula.

Cursor on the formula.

Point to the formula and also both angle and wavelength.

Here, the angle is directly proportional to the wavelength.
Slide Number 9

Assignment

Change the wavelength to 380 nm and width of slit to 5000 nm.

Use the table as shown earlier in this tutorial for your referernce.

Tabulate the total number of maxima and minima.

As an assignment,

Change the wavelength to 380 nm and width of slit to 5000 nm.


Use the table as shown earlier in this tutorial for your referernce.


Tabulate the total number of maxima and minima.

Slide Number 10

Assignment

For each maxima tabulate the value of relative intensity from the App.

Explain the diffraction pattern

For each maxima tabulate the value of relative intensity from the App.

Explain the diffraction pattern

Slide Number 11

Assignment

Diffrentiate between interference and diffraction patterns.

Differentiate between interference and diffraction patterns.
Let us summarize.
Slide Number 12

Summary

In this tutorial we have,
  • Verified the relation between wavelength and relative intensity.
  • Found the relation between slit width, maxima and minima.
  • Calculated the angle for the given maxima.
  • Interpreted diffraction intensity profile.
  • Verified the relation between wavelength and angle.
Slide Number 13

Acknowledgement

These Apps are created by Walter-fendt and his team.

These Apps are created by Walter-fendt and his team.
Slide Number 14

About Spoken Tutorial project.

The video at the following link summarizes the Spoken Tutorial project.

Please download and watch it.

Slide Number 15

Spoken Tutorial workshops.

The Spoken Tutorial Project team,

conducts workshops and gives certificates.

For more details, please write to us.

Slide Number 16

Forum for specific questions

Please post your timed queries in this forum.
Slide Number 17

Acknowledgement

Spoken Tutorial Project is funded by MHRD, Government of India.
This is Himanshi Karwanje from IIT-Bombay.

Thank you for joining.

Contributors and Content Editors

Karwanjehimanshi95, Madhurig