Linux/C2/The-Linux-Environment/Kannada

Time	Narration
00:00	ಲಿನಕ್ಸ್ ಎನ್ವಿರೋನ್ಮೆಂಟ್ ಮತ್ತು ಅದರ ಕುಶಲತಾಪೂರ್ವಕ ಬಳಕೆಯ ಬಗ್ಗೆ ಇರುವ ಈ ಟ್ಯುಟೋರಿಯಲ್ ಗೆ ನಿಮಗೆ ಸ್ವಾಗತ.
00:07	ಈ ಟ್ಯುಟೋರಿಯಲ್ ನಲ್ಲಿ ಸಚಿತ್ರವಾಗಿ ತೋರಿಸಿರುವ ಉದಾಹರಣೆಗಳನ್ನು ಪರೀಕ್ಷಿಸಲು ಲಿನಕ್ಸ್ ಇರುವ ಸಿಸ್ಟಮ್ ಮತ್ತು ಅದರಲ್ಲಿ ಉಬುಂಟು ಇರುವುದು ಅನಿವಾರ್ಯವಾಗಿದೆ.
00:13	ನೀವು ಲಿನಕ್ಸ್ ಆಪರೇಟಿಂಗ್ ಸಿಸ್ಟಮ್ ನ ಉಪಯೋಗವನ್ನು ತಿಳಿದಿರುವಿರಿ ಮತ್ತು ಕಮಾಂಡ್ ಗಳು, ಫೈಲ್ ಸಿಸ್ಟಮ್ ಗಳು ಮತ್ತು ಶೆಲ್ ಗಳ ಬಗ್ಗೆ ಮೂಲಭೂತಜ್ಞಾನವನ್ನು ಹೊಂದಿದ್ದೀರಿ ಎಂದು ನಾನು ಭಾವಿಸುತ್ತೇನೆ.
00:22	ನೀವು ಆಸಕ್ತರಿದ್ದಲ್ಲಿ, ಅಥವಾ ಇವುಗಳನ್ನು ಇನ್ನೂ ಸ್ಪಷ್ಟವಾಗಿ ತಿಳಿಯಬಯಸಿದಲ್ಲಿ ನಿಸ್ಸಂಕೋಚವಾಗಿ ಈ ವೆಬ್ಸೈಟ್ ನಲ್ಲಿರುವ ಇನ್ನೊಂದು ಟ್ಯುಟೋರಿಯಲ್ ಅನ್ನು ವೀಕ್ಷಿಸಿ.
00:32	ದಯವಿಟ್ಟು ಗಮನಿಸಿ, ಇಲ್ಲಿ ನಾನು ಈ ಟ್ಯುಟೋರಿಯಲ್ ನ ರೆಕಾರ್ಡ್ ಗಾಗಿ ಉಬಂಟು 10.10 ಅನ್ನು ಉಪಯೋಗಿಸುತ್ತಿದ್ದೇನೆ.
00:36	ಹಾಗೂ, ಲಿನಕ್ಸ್ ಎನ್ನುವುದು ಕೇಸ್ ಸೆನ್ಸಿಟೀವ್ ಆಗಿದ್ದು ಇಲ್ಲಿ ಉಪಯೋಗಿಸುವ ಎಲ್ಲಾ ಕಮಾಂಡ್ ಗಳೂ ಲೋವರ್ ಕೇಸ್ ನಲ್ಲಿ ಇರುತ್ತವೆ, ಇಲ್ಲದಿದ್ದಲ್ಲಿ ಅದನ್ನು ತಿಳಿಸಲಾಗಿದೆ.
00:46	ಲಿನಕ್ಸ್ ಎನ್ವಿರೋನ್ಮೆಂಟ್ ಎನ್ನುವುದು ಆಪರೇಟಿಂಗ್ ಸಿಸ್ಟಮ್ ನಿಮ್ಮ ಜೊತೆ ಹೇಗೆ ವ್ಯವಹರಿಸುತ್ತದೆ, ಅದು ನಿಮ್ಮ ಕಮಾಂಡ್ ಗಳಿಗೆ ಹೇಗೆ ಪ್ರತಿಕ್ರಿಯಿಸುತ್ತದೆ ಹಾಗೂ ನಿಮ್ಮ ಕಾರ್ಯಗಳನ್ನು ಹೇಗೆ ಇಂಟರ್ಪ್ರೆಟ್ ಮಾಡುತ್ತದೆ ಮುಂತಾದವುಗಳನ್ನು ನಿರ್ಧರಿಸುತ್ತದೆ.
00:55	ಶೆಲ್ ನ ಸೆಟ್ಟಿಂಗ್ ಅನ್ನು ಬದಲಾಯಿಸುವುದರ ಮೂಲಕ ಲಿನಕ್ಸ್ ಅನ್ನು ಇನ್ನೂ ಹೆಚ್ಚು ಕಸ್ಟಮೈಸ್ ಮಾಡಬಹುದು.
00:58	ಈಗ ಇವೆಲ್ಲಾ ಹೇಗೆ ಆಗುತ್ತವೆ ಎಂಬುದನ್ನು ತಿಳಿಯೋಣ.
00:59	ಸಾಮಾನ್ಯವಾಗಿ, ಶೆಲ್ ನ ನಡವಳಿಕೆಯು ಶೆಲ್ ವೇರಿಯೇಬಲ್ ನ ಮೂಲಕ ನಿರ್ಧರಿಸಲ್ಪಡುತ್ತವೆ.
01:04	ಮುಖ್ಯವಾಗಿ ಎರಡು ತರಹದ ಶೆಲ್ ವೇರಿಯೇಬಲ್ ಗಳಿವೆ: ಎನ್ವಿರೋನ್ಮೆಂಟ್ ವೇರಿಯೇಬಲ್ಸ್ ಮತ್ತು ಲೋಕಲ್ ವೇರಿಯೇಬಲ್ಸ್ ಎಂದು.
01:12	ಎನ್ವಿರೋನ್ಮೆಂಟ್ ವೇರಿಯೇಬಲ್ಸ್ ಎಂದು ಹೆಸರು ಏಕೆಂದರೆ, ಇವು ಬಳಕೆದಾರನ ಸಂಪೂರ್ಣ ಬಳಕೆಯ ಕ್ಷೇತ್ರದಲ್ಲಿ ಲಭ್ಯವಾಗುತ್ತವೆ.
01:19	These are also available in subshells spawned by the shell like the ones for running shell scripts.
01:24	Local Variables , which as the name suggests have a more restricted or limited availability.
01:31	These are not available in the subshells spawned by the shell.
01:36	While in this tutorial, we will mainly talk about environment variables, let us first see how the value of these shell variables can be seen.
01:48	To see all the variables available in the current shell , we run the command set.
01:53	Type at the terminal "set space 'vertical-bar' more" and press enter.
02:00	We can see all the current shell variables ,
02:04	For example : take a look at the HOME environment variable also notice the value assigned to it.
02:15	press Enter to move through the list and in order to come out press q
02:21	Here the output from set was pipelined to more in order to display a more systematic multipage output of the variable list.
02:38	To see only the environment variables run the command env
02:45	Type at the terminal "env space 'vertical-bar' more" and press enter
02:52	For example, Notice the SHELL variable whose value is slash bin slash bash .
03:00	Again, you may press q to come out of the list.
03:07	Now let us discuss some of the more important environment variables in linux.
03:11	We would be using the bash shell for all our demonstrations here.
03:15	Different shells are customized in slightly different ways.
03:19	To see what a variable actually stores we have to prefix a dollar sign to the name of that variable and use the echo command along with it.
03:30	The first environment variable that we would see is the SHELL variable.
03:35	It stores the name of the current shell.
03:37	To see what is the value of the SHELL variable, type at the terminal "echo space dollar S-H-E-L-L in capital"and press enter.
03:55	Here slash bin slash bash is the shell where we are currently operating.
04:02	The next variable is the HOME.
04:05	When we login into Linux, it normally places us in a directory named after our user name.
04:11	This directory is called the home directory and this is exactly what is available in HOME variable.
04:17	To see the value, type at the terminal "echo space dollar H-O-M-E in capital"and press enter
04:29	The next environment variable is PATH.
04:32	The PATH variable contains the absolute paths of the directories that the shell is supposed to search for locating any executable command.
04:40	Lets see the value of the path variable.
04:43	Again, type at the terminal "echo space dollar P-A-T-H " in capitals and press enter
04:51	On my computer it shows the directories slash user slash local slash sbin slash user slash local slash bin slash user slash sbin slash user slash bin etc.
05:04	This may slightly vary from one system to other.
05:07	It is actually a list of directories separated by the :(colon) delimiter, that the shell would search in this order for finding an executable command.
05:18	We can also add our own directory to this list so that our directory is also searched by the shell.
05:25	In order to add our own directory type at the terminal
5:29	"P-A-T-H in capital 'equal-to' dollar P-A-T-H again in capital colon slash home slash the name of my own home directory and press enter.
05:54	Now if we echo the value of PATH,
06:04	our added directory will also be a part of the PATH variable.
06:10	See the directory is now present here.
06:16	Another interesting variable is the LOGNAME.
06:20	It stores the username of the currently active user.
06:24	In order to see the value type "echo space dollar LOGNAME" and press enter.
06:35	When we open the terminal we can see the dollar sign, which is the prompt at which we enter all our commands.
06:42	This is the primary prompt string represented by the environment variable PS1.
06:47	There is a secondary prompt string also
06:50	If our command is long and it spans for more than one line then from the second line onwards we can see a greater than sign “>” as the prompt
07:00	This is the secondary prompt string represented by the environment variable PS2.
07:05	To see the value of the secondary command prompt, type at the terminal "echo space dollar PS2 and press enter.
07:20	We may change our primary prompt string to say “at the rate” <@> at the prompt.
07:28	In order to get this done Type "PS1 'equal-to' now within quotes 'at the rate' “ and press enter.
07:41	Now instead of the dollar sign we can see the at the rate sign as the prompt.
07:50	We may do something more interesting. Like we may display our username at the prompt.
07:56	Just type "PS1in capital 'equal-to' within quotes dollar LOGNAME " and press enter
08:12	Now my username is my prompt.
08:16	To revert back type "PS1 'equal-to' dollar within quotes and press enter."
08:28	We have assigned values to many of the environment variables.
08:32	But, remember one thing that these modifications are only applicable for the current session.
08:37	Like we had just added our directory to the PATH variable.
08:40	If we close the terminal and open it again or open a new terminal altogether and check the path variable by echoing its value
09:00	we will be surprised to see that our modifications are no longer present.
09:05	The way by which we can make these modifications permanent will be covered in some advanced tutorial.
09:13	Often we want to re-execute a command that we had executed in the recent past. What do we do? Do we have to type the entire command again?
9:22	No, there are a number of solutions.
09:26	First, normally if you press the up key on your keyboard then it will show the last command that you typed.
09:33	Keep pressing and it will keep scrolling through the previous commands.
09:37	To go back press the down key.
09:42	But when you have to scroll through many commands this becomes a little clumsy and tedious. A better way is to use the history command.
09:52	Type at the prompt "history"
09:58	and press enter, see a list of previously executed commands appears
10:04	If instead of the large list you want to see, only the last ten
10:08	Type "history space 10" and press enter
10:20	Notice, in this list, there is a number assigned to each of the previously executed commands.
10:27	In order to repeat a particular command.
10:32	Just type exclamation mark followed by the number of the command for example 442 in my case would execute echo space dollar path
10:51	If you need to re execute the last command simply type exclamation mark twice and press enter.
11:03	The next thing we would see is called tilde substitution The tilde(~) character is a shorthand for the home directory.
11:12	So say you have a directory with name testtree in your home directory. You can move to it by typing "cd space 'tilde' slash testtree".
11:25	One may also toggle between the current working directory and the last directory used by giving the command cd 'tilde' minus or only cd minus
11:35	Like now that we are in the testtree directory, the last directory we visited was the home directory.
11:41	So if we run "cd space minus" and press enter. It will go to the home directory.
11:47	Run it again and it will take us back to the testtree directory.
11:55	The last but quite important command we will see is the alias command.
11:59	It may happen that you have a large command that needs to be run again and again.
12:04	In this case we can give it a short alias name and use the alias name instead ,to invoke it.
12:11	Assuming that you have such a long directory hierarchy that you frequently visit for music, you may create an alias for it like this
12:20	Type " alias space cdMusic 'equal-to' within double quotes cd space slash home slash arc slash files slash entertainment slash music " and press enter
12:47	Now every time you need to switch to this directory simply write cdMusic and press enter.
12:55	See, we are in the music directory now.
12:58	Now, you may type "cd space minus" at the prompt to go back to the previous working directory.
13:08	To unset an alias simply write unalias space cdMusic and press enter
13:20	Now again if you fire cdMusic from the terminal, you will get an error stating that the command was not found.
13:30	Suppose we have two files, test1 and test2 in our present working directory
13:38	and if we fire rm test1, test1 is silently deleted.
13:45	We know that “hyphen i” option of the rm command makes the removal process interactive.
13:52	So we may set an alias like, alias rm equal-to, now within quotes “rm space hyphen i”
14:03	Now when we run “rm” ,” rm hyphen i” will actually be run.
14:13	So we saw that while test1 was silently deleted, system asked before deleting test2.
14:20	So, in this tutorial, you have learned about environment variables, history and aliasing.
14:25	This brings me to the end of this tutorial.
14:28	Spoken Tutorials are a part of the Talk to a Teacher project, supported by the National Mission on Education through ICT.
14:36	More information on the same is available from our website.
14:39	The Script for this tutorial was created by Anirban
14:42	This script has been contributed by ----------------------(name of the translator) and this is -----------------------(name of the recorder) from --------------------------(name of the place)signing off.

Contributors and Content Editors

PoojaMoolya, Pratik kamble, Vasudeva ahitanal