Java/C2/Installing-Eclipse/English-timed

Time'	Narration
00:01	Welcome to the spoken tutorial on Installing Eclipse on Linux
00:06	In this tutorial, you will be learn how to Install Eclipse on Ubuntu and on Redhat operating systems.
00:15	For this tutorial, we are using Ubuntu 11.10
00:20	To follow this tutorial, you must be
00:22	connected to the internet and must have knowledge of using terminal in Linux.
00:28	You must also have the root access or the sudo permission.
00:32	If you do not know what is a root or sudo, do not bother.
00:36	You can proceed through the tutorial.
00:39	If you are on a network that uses a proxy, then you must have access to the proxy.
00:45	If not, for relevant tutorials please visit our website as shown.
00:51	We shall now install Eclipse on Ubuntu using the commands shown and
00:55	also learn about the minor changes required to do the same on Redhat.
01:05	Now let us open the terminal.
01:07	Press Control, Alt and t .
01:10	This launches the terminal in Ubuntu.
01:18	If you are on a network that uses proxy, you will have to set it on the terminal.
01:23	If you do not know what a proxy is, you may not be on a network that uses one.
01:28	So you can skip this step.
01:30	For those who are using proxy, will have to set it.
01:34	There are two types of proxies.
01:36	One requires a username and password while the other doesn’t.
01:40	Find out the type of proxy you are using, from the concerned person.
01:45	On the terminal, type sudo SPACE HYPHEN s
01:52	But prompt it, type the password.
01:57	Note that as you type password, there is no feedback in the form of asterisk or other symbols hit enter
02:06	Notice that the prompt symbol has changed from DOLLAR to HASH.
02:14	Now type export SPACE http UNDERSCORE proxy EQUAL TO http://tsuser:tspwd@10.24.0.2:8080
02:47	In this command , tsuser is the username for proxy authentication and tspwd is the password.
02:55	Please change these values to suit your need.
02:59	10.24.0.2 is the host address of the proxy and 8080 is the port number.
03:07	Change these details also, to suit your need press enter.
03:14	In some cases the network does not require authentication.
03:18	In such cases the username and password part can be left blank.
03:22	Since my proxy does not require authentication, I am going to remove those details.
03:28	Press up arrow to get the previous command and remove the username and password and.
03:35	Hit Enter
03:36	These commands set the http proxy. We know how to set the https proxy
03:44	Press up arrow to get the previous command and type s' to change http to https and hit enter
03:54	We have now successfully set the proxy
03:58	press Ctrl + D to return to the normal prompt.
04:02	Type clear' and hit enter to clear the screen
04:11	Now we shall install eclipse.
04:14	Type sudo SPACE apt HYPHEN get SPACE update.
04:25	This command fetches a list of all the available software, hit enter
04:33	Depending on your internet speed,it takes a while to fetch the list of software
04:45	The operation is complete when the terminal returns to the DOLLAR PROMPT. Type clear and hit enter to clear the screen
04:55	Type sudo' spaceapt hypen 'get spaceinstall spaceeclipse and hit enter.
05:10	This commands fetches and installs theeclipse software on the system.
05:15	Notice the line that reads, needs to get 10.8 Mb.
05:22	Depending on your system this number will be different and depending on your internet speed.
05:27	The time required to fetch the packages will be different.
05:30	At the prompt of Y' orN typey and hit enter
05:39	All the required packages are downloaded and unpack into the system
05:59	The installation is complete when the terminal returns to the Dollar prompt.
06:05	Now let us verify if eclipse is installed and is available on the system
06:10	Press Alt+ F2 in the dialogue box type Eclipse and hit Enter
06:22	This launches the eclipse application.If Eclipse has not been installed, it will not open the application.
06:31	We get Workspace Launcher prompt. click OK to proceed.
06:40	And we get “Welcome to Eclipse” page. This means eclipse has been successfully installed on the system .
06:53	The process for installing Eclipse on Debian ,Kubuntu and Xubuntu is same as that on Ubuntu
07:04	The process of installing Eclipse on Redhat is similar to that on Ubuntu.
07:09	The only difference is the commands used for fetching and installing.
07:13	For fetching the list of software , use sudo SPACE yum SPACE update.
07:19	For installing eclipse, use sudo SPACE yum SPACE install SPACE eclipse.
07:27	The process for installing Eclipse on Fedora, centos and suse linux is the same as that on Redhat.
07:37	This brings us to the end of the tutorial .
07:39	We have seen how to install Eclipse on Ubuntu and similar Operating System and on Redhat and similar Operating System'.
07:49	As an assignment for this tutorial .
07:52	Find out more operating systems that have similar installation procedure for eclipse
07:59	To know more about the Spoken Tutorial project, watch the video available at the following link.
08:04	It summarises the Spoken Tutorial project.
08:07	If you do not have good bandwidth, you can download and watch it
08:12	The Spoken Tutorial Project Team.
08:13	Conducts workshops using spoken tutorials
08:16	gives certificates to those who pass an online test.
08:19	For more details, please write to contact AT spoken HYPHEN tutorial DOT org.
08:26	Spoken Tutorial Project is a part of the Talk to a Teacher project.
08:30	It is supported by the National Mission on Education through ICT, MHRD, Government of India.
08:36	More information on this Mission is available at spoken HYPHEN tutorial DOT org SLASH NMEICT HYPHEN Intro
08:42	This tutorial has been contributed by TalentSprint. Thanks for joining.

Contributors and Content Editors

Gaurav, Kavita salve, PoojaMoolya, Sandhya.np14, Sneha, Vasudeva ahitanal