Java/C2/Installing-Eclipse/Gujarati

From Script | Spoken-Tutorial
Revision as of 10:57, 18 July 2013 by Jyotisolanki (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Time' Narration
00:01 Welcome to the spoken tutorial on Installing Eclipse on Linux
00:06 In this tutorial, you will be learn how to Install Eclipse on Ubuntu and on

Redhat operating systems.

00:15 For this tutorial, we are using Ubuntu 11.10
00:20 To follow this tutorial, you must be
00:22 connected to the internet and must have knowledge of using terminal in Linux.


00:28 You must also have the root access or the sudo permission.


00:32 If you do not know what is a root or sudo, do not bother.


00:36 You can proceed through the tutorial.


00:39 If you are on a network that uses a proxy, then you must have access to the proxy.


00:45 If not, for relevant tutorials please visit our website as shown.



00:51 We shall now install Eclipse on Ubuntu using the commands shown and


00:55 also learn about the minor changes required to do the same on Redhat.
01:05 Now let us open the terminal.


01:07 Press Control, Alt and t .


01:10 This launches the terminal in Ubuntu.
01:18 If you are on a network that uses proxy, you will have to set it on the terminal.


01:23 If you do not know what a proxy is, you may not be on a network that uses one.


01:28 So you can skip this step.



01:30 For those who are using proxy, will have to set it.


01:34 There are two types of proxies.


01:36 One requires a username and password while the other doesn’t.


01:40 Find out the type of proxy you are using, from the concerned person.
01:45 On the terminal, type sudo SPACE HYPHEN s
01:52 But prompt it, type the password.



01:57 Note that as you type password, there is no feedback in the form of asterisk or other symbols hit enter
02:06 Notice that the prompt symbol has changed from DOLLAR to HASH.
02:14 Now type


export SPACE

http UNDERSCORE proxy

EQUAL TO

http://tsuser:tspwd@10.24.0.2:8080

02:47 In this command , tsuser is the username for proxy authentication and tspwd is the password.


02:55 Please change these values to suit your need.
02:59 10.24.0.2 is the host address of the proxy and 8080 is the port number.


03:07 Change these details also, to suit your need press enter.


03:14 In some cases the network does not require authentication.


03:18 In such cases the username and password part can be left blank.
03:22 Since my proxy does not require authentication, I am going to remove those details.


03:28 Press up arrow to get the previous command and remove the username and password and.


03:35 Hit Enter
03:36 These commands set the http proxy. We know how to set the https proxy


03:44 Press up arrow to get the previous command and type s' to change http to https and hit enter


03:54 We have now successfully set the proxy
03:58 press Ctrl + D to return to the normal prompt.


04:02 Type clear' and hit enter to clear the screen


04:11 Now we shall install eclipse.
04:14 Type sudo SPACE apt HYPHEN get SPACE update.


04:25 This command fetches a list of all the available software, hit enter


04:33 Depending on your internet speed,it takes a while to fetch the list of software
04:45 The operation is complete when the terminal returns to the DOLLAR PROMPT. Type clear and hit enter to clear the screen
04:55 Type sudo' spaceapt hypen 'get spaceinstall spaceeclipse and hit enter.


05:10 This commands fetches and installs theeclipse software on the system.
05:15 Notice the line that reads, needs to give 10.8 Mb.
05:22 Depending on your system this number will be different and depending on your internet speed.
05:27 The time required to fetch the packages will be different.


05:30 At the prompt of Y' orN typey and hit enter
05:39 All the required packages are downloaded and unpack into the system


05:59 The installation is complete when the terminal returns to the Dollar prompt.
06:05 Now let us verify if eclipse is installed and is available on the system
06:10 Press Alt+ F2 in the dialogue box type Eclipse and hit Enter
06:22 This launches the eclipse application.If Eclipse has not been installed, it will not open the application.
06:31 We get Workspace Launcher prompt. click OK to proceed.
06:40 And we get “Welcome to Eclipse” page. This means eclipse has been successfully installed on the system .
06:53 The process for installing Eclipse on Debian ,Kubuntu and Xubuntu is same as that on Ubuntu
07:04 The process of installing Eclipse on Redhat is similar to that on Ubuntu.
07:09 The only difference is the commands used for fetching and installing.


07:13 For fetching the list of software , use sudo SPACE yum SPACE update.


07:19 For installing eclipse, use sudo SPACE yum SPACE install SPACE eclipse.
07:27 The process for installing Eclipse on Fedora, centos and suse linux is the same as that on Redhat.
07:37 This brings us to the end of the tutorial .
07:39 We have seen how to install Eclipse on Ubuntu and similar Operating System and on Redhat and similar Operating System'.
07:49 As an assignment for this tutorial .
07:52 Find out more operating systems that have similar installation procedure for eclipse
07:59 To know more about the Spoken Tutorial project, watch the video available at the following link.


08:04 It summarises the Spoken Tutorial project.


08:07 If you do not have good bandwidth, you can download and watch it
08:12 The Spoken Tutorial Project Team.


08:13 Conducts workshops using spoken tutorials
08:16 gives certificates to those who pass an online test.
08:19 For more details, please write to contact AT spoken HYPHEN tutorial DOT org.
08:26 Spoken Tutorial Project is a part of the Talk to a Teacher project.


08:30 It is supported by the National Mission on Education through ICT, MHRD, Government of India.


08:36 More information on this Mission is available at spoken HYPHEN tutorial DOT org SLASH NMEICT HYPHEN Intro
08:42 This tutorial has been contributed by TalentSprint. Thanks for joining.

Contributors and Content Editors

Jyotisolanki, Krupali, PoojaMoolya