OpenModelica
OpenModelica is an open source modelling and simulation environment intended for industrial and academic usage.It is an object oriented declarative multi domain modelling language for complex systems. The OpenModelica environment allows most of the expression, algorithm, and function parts of Modelica to be executed interactively, as well as equation models and Modelica functions to be compiled into efficient C code. The generated C code is combined with a library of utility functions, a run-time library and a numerical DAE solver. OpenModelica Connection Editor is the new Graphical User Interface for graphical model editing in OpenModelica.
Modelica has emerged as a strong contender in the arena of simulation languages. Modelica's object-oriented design makes it easy to develop chemical engineering unit operations and connect them to one another. With proprietary databases of thermodynamic and physical properties interfaced into the software, simulation of Chemical Engineering models has become much more user friendly and provides accurate results.
This environment can be used to work for both steady state as well as dynamic systems. Attractive strategy when dealing with design and optimization problems. As all the equations are solved simultaneously it doesn't matter whether the unknown variable in an input or output variable.
The Spoken Tutorial Effort for OpenModelica was contributed by Bhargava Nemmaru from the Spoken Tutorial Project and is supported by Rahul Jain, Kaushik Datta, Rahul Nagraj (intern) and Jayaram Ganesh (intern) from IIT Bombay.
Learners: Chemical Engg students to learn how to do energy balance
Contents
Basic Level
1. Overview of OpenModelica
- Introduction to Modeling and Simulation
- What is OpenModelica
- Subsystems of OpenModelica Environment
- Features of OpenModelica
- Spoken Tutorials available on OpenModelica
- Timed discussion forum
- About Spoken Tutorial project
- Textbook companions for OpenModelica
- Lab migration for OpenModelica
2. Introduction to OMEdit
- What is OpenModelica
- What is OMEdit
- Perspectives in OMEdit
- Browsers in OMEdit
- View icons in OMEdit
- Open a Class from Libraries Browser
- Using Thermal library
- Using HeatTransfer library
- Checking for correctness of the model
- Using Simulate button
- Plotting using conduction variable
- Using Re-simulate button
- Using Simulation Setup
- Specifying Stop Time
- Using New Parametric Plot Window
- How to delete results
3. Examples through OMEdit
- Using Modelica library
- Using Electrical library
- Using Analog library
- Open Rectifier Class
- Changes in input variable values
- Compare the variables values
- Plotting between different variables
- Using Mechanics library
- Using Multibody library
- Open DoublePendulum class
- Comparing input values
- Plotting between time vs a_rel
- Specifying Start Time and Stop Time
- Changing Simulation interval
4. OpenModelica Connectors
- Creating new Modelica class
- Open an existing class
- Connectors
- Use of Connectors
- Adding Resistor, Inductor and Capacitor
- Adding Voltage Source and Ground
- Adding pin connector
- Connection of different classes
- Connecting through different pins
- Plotting between input variables
5. Developing an equation-based model
- Defining different Perspectives
- Defining Libraries Browser
- Defining different View icons
- Creating a new Modelica class
- Variable and Parameter declaration
- Defining Start and Unit attribute
- Defining min and max attribute
- Defining Comments
- Declaration of equations
- Using Simulation Setup button
- Specifying Stop Time
- Correcting errors in Messages browser
6. Control flow and Event handling
- Defining initial equation
- Using if-else statement
- Using Plotting perspective
- Handling time and state events
- Defining reinit() function
- Rectify the errors in Messages Browser
- Using Simulate button
- Using Simulation Setup option
- Specifying Stop Time
- Using when statement
7. Functions and Types
- Defining a function
- Defining Real variable
- Defining Input and Output variable
- Using algorithm
- Defining assignment statement
- Restrictions on functions
- Defining data types
8. Arrays in Modelica
- Defining Vector
- Defining Vector Indexing
- Declaring array variables
- Using for loops
- Using while loops
- Constructing arrays
- Using Nested for loop
9. Array Functions and Operations
- Using OMShell
- Using fill() functions
- Using zeros() and identity() function
- Performing arithmetic operations
- Using min() and max() function
- Using sum() and Product ()
- Using abs() and Size () functions
- Using ndims() function
Intermediate Level
10. Modelica Packages
- Defining Package
- Defining Single file storage
- Creating a package of classes
- Using Within statement
- Using Modelica library
- Reference classes in a package
- Using Import statements
11. Annotations in Modelica
- Using Annotations
- Using experiment annotation
- Using Simulation Setup button
- Specifying model annotations
- Applying Documentation annotation
- Defining a record
12. Icon and Diagram Views
- Specifying Icon and Diagram Views of a class
- Using Annotations
- Using coordinateSystem
- Using Extent
- Specifying Grid and Component
- Defining OriginX and OriginY
- Defining Extent1X and Extent1Y
- Using Line and Fill Style
- Inserting figures in Icon/Diagram View
13. Component-oriented modeling
- Instantiating a class
- Defining Component orientation
- Defining Acausal connectors
- Simulating an Electric Circuit
- Defining Resistor,VoltageSource and Ground
- Defining pin connector
- Connecting different classes
- Connecting pins
- Using Plotting Perspectives
- Using Variables Browser
14. Block Component Modeling
- Defining a block in Modelica
- Connecting blocks
- Using MISO block
- Using Modelica Library
- Defining RealInput and RealOutput connectors
- Instantiating Sum and Product function
- Using nin parameter
- Using Simulate button
