Java/C2/do-while/English-timed

Time'	Narration
00:01	Welcome to the spoken tutorial on do-while Loop in java.
00:06	In this tutorial, you will learn about do-while loop and' how to use it
00:12	For this tutorial we are using Ubuntu 11.10, JDK 1.6 and Eclipse 3.7
00:20	To follow this tutorial, you musthave knowledge of while loop in java.
00:25	If not, for relevant tutorials please visit our website as shown.
00:32	Here is the structure for do-while loop.
00:37	Notice that it is similar to a while loop.
00:40	It has two parts.
00:42	First is the loop running condition. And the second is the loop variable
00:51	The only difference is that the condition is written after the do block.
00:58	And so the condition is checked after the execution of the statements inside the do block
01:05	Now let us see an example.
01:07	Switch to eclipse
01:11	Here we have Eclipse IDE and the skeleton required for the rest of the code.
01:17	We have created a class DoWhileDemo and added the main method to it.
01:22	We are going to print the numbers from 1 to 10 using a do-while loop.
01:27	Type
01:29	int n equalto 1
01:32	n is going to be loop variable.
01:36	then type do
01:40	open and close braces
01:44	Inside the bracesSystem.out.println(n);
01:55	We shall print the value of n and then increment it. n equalto n plus 1;
02:05	And we do this as long as
02:08	n is less than or equal to 10
02:10	Outside the braces Type while in paranthesis(n less than equalto 10)
02:20	And close the do-while using a semi-colon
02:25	Let us see the code in action.
02:28	Save and Run.
02:37	We see that, the numbers from 1 to 10 are printed.
02:42	now Let us understand how the code is executed.
02:47	First, the value 1 is printed and then n becomes 2.
02:52	And then, the condition is checked.
02:55	since it is true, again 2 is printed and n becomes 3.
03:00	And so on till all the 10 numbers are printed and the value of n becomes 11.
03:06	When n = 11, the condition fails and the loop stops.
03:11	Now Let us print numbers from 50 to 40 in decreasing order.
03:17	So we start with 50.
03:19	Change n = 1 to n = 50.
03:23	Since we are looping from a bigger number to a smaller number, we decrement the loop variable.
03:29	So Change n = n + 1 to n = n - 1
03:34	We loop as long as n is greater than or equal to 40.
03:40	So Change the condition to n >= 40
03:48	Let us look at the output.
03:50	Save and Run.
03:57	As we can see, the numbers from 50 to 40 are printed.
04:02	Now let us try a different logic using the do-while loop.
04:10	Given a number, we shall find out if it is a perfect square or not.
04:15	First Clear the main method.
04:19	ThenType int n = 25;
04:25	We shall see if the value in n is a perfect square or not.
04:32	Then typeint x = 0;
04:37	We shall use x to store the square root of the number if it is a perfect square.
04:44	Then Type do
04:46	Open and close braces.
04:49	Inside the bracesx equal to x plus 1
04:55	And outside the braces
04:58	while in paranthesis (x into x < n)
05:06	And Close the do-while usinga semi-colon
05:10	As long a x into x is less than n, we keep incrementing the value of x.
05:16	So when the loop stops, the reverse of this condition will be true.
05:22	Which means either x into x must be equal to n.
05:26	Or it must be greater than n.
05:28	If x into x is equal to n, the number is a perfect square.
05:32	If it is not equal to n, the number is not a perfect square.
05:37	So finally, we print the condition.
05:47	System.out.println(x * x == n);
05:55	Let us see the code in action.
05:59	Save and Run. As we can see, the output is true
06:07	Let us try with other perfect square.
06:10	Change n = 25 to n = 49
06:15	Save and Run
06:20	We see that we get the true again .
06:23	Let us try with a number which is not a perfect square.
06:26	Change 49 to 23. Save and Run and
06:34	We get a false as expected.
06:37	Now let us see what happens when the value of n is 0.
06:42	Change n = 23 to n = 0 Since 0 is not a natural number, we must get a false.
06:52	Let us run the code.
06:54	Save and Run.
07:00	We see that we get false as expected.
07:05	This happens because even before the condition
07:08	x into x is less than n is checked, the value of x is incremented and it becomes 1
07:16	The loop condition fails and loop does not run.
07:20	This way, by using a do-while loop, we make sure that 0 is not considered as a perfect square.
07:26	This way, a do-while loop is used for solving a range of problems.
07:31	Specially, when the loop must run at least once.
07:37	This brings us to the end of the tutorial.
07:40	In this tutorial, we learnt about the
07:42	The do-while loop and how to use it
07:46	As an assignment for this tutorial, solve the following problem.
07:50	Given a binary number, find out its decimal equivalent. Example: 11010 => 26
07:56	To know more about the Spoken Tutorial project, watch the video available at the following link.
08:01	It summarizes the spoken-tutorial project.If you do not have good bandwidth, you can download and watch it.
08:06	The Spoken Tutorial Project Team.
08:10	Conducts workshops using spoken tutorials .gives certificates for those who pass an online test.
08:16	For more details, please write to contact AT spoken HYPHEN tutorial DOT org.
08:22	The Spoken Tutorial Project is a part of the Talk to a Teacher project . It is supported by the National Mission on Education through ICT, MHRD, Government of India.
08:32	More information on this Mission is available at the following link
08:36	This tutorial has been contributed by TalentSprint. Thanks for joining.

Contributors and Content Editors

Gaurav, PoojaMoolya, Sandhya.np14, Sneha