KTouch/S1/Configuring-Settings/Gujarati

Time	Narration
00.00	KTouch માં સુયોજનો રૂપરેખાંકિત કરવા પરના સ્પોકન ટ્યુટોરીયલમાં તમારું સ્વાગત છે.
00.04	આ ટ્યુટોરીયલ માં, તમે:
00.08	તાલીમ સ્તર બદલવું ટાઈપ ની ઝડપ સંતુલિત કરવું
00.13	શોર્ટ કટ કીઓ રૂપરેખાંકિત કરવું. ટૂલબાર રૂપરેખાંકિત કરવું. ટાઈપીંગ મેટ્રિક્સ જોતા શીખીશું.
00.20	અહીં, આપણે ઉબુન્ટુ લીનક્સ આવૃત્તિ 11.10 પર KTouch આવૃત્તિ 1.7.1 નો ઉપયોગ કરી રહ્યા છીએ.
00.27	KTouch ખોલો.
00.33	We are at Level 1.Let us move on to the second level that is 2.
00.40	To increase the level of the training to 2, click on the top triangle symbol, next to the Level field.
00.48	Notice what happens when we change the level to 2?
00.52	The characters in the Teacher’s Line change!
00.56	Look at the characters displayed under the New Characters in this Level field.They’ve changed too!
01.02	These are the characters that are to be practised for the selected level.
01.07	Now, let’s start typing.
01.09	Now let us type a character that is not displayed in the Teacher’s Line.
01.14	The Student Line changes to red.
01.17	What else do you see?
01.19	The percentage displayed in the Correctness field decreases.
01.23	Let’s press backspace and delete the mistake.
01.27	Let us learn to set Training options.
01.31	What are Training Options?
01.33	We use Training options to change the parameters for typing speed and correctness (percentage of typing accuracy).
01.41	We can also customize the number of lines that can be typed in a particular level.
01.47	From the Main menu, select Settings, and click Configure KTouch.
01.52	The Configure – KTouch dialog box appears.
01.56	From the Left Panel of the Configure – KTouch dialog box, click Training Options.
02.02	The right panel now displays the various Training Options.
02.06	Let’s set the upper limit for the Typing speed, Correctness, and Workload.
02.13	Under Limits to increase a level, let us:
02.15	Set the Typing Speed to 120 characters per minute,Correctness to 85%.
02.24	Finally let’s set Workload to 1.
02.27	This means that we need to complete only one line in each level.
02.31	We then will automatically move to the next level.
02.36	If you want to complete the training for a level before you proceed to the next level,check the "Complete whole training level before proceeding box".
02.46	Let’s set the lower limit for the Typing speed and Correctness.
02.50	Under Limits to decrease a level, let us:
02.53	Set the Typing Speed to 60 characters per minute and Correctness to 60.
03.00	Let’s check the box Remember level for next program.
03.06	Click Apply.Click OK.
03.09	Changes we made are applied only when we start a new session again.
03.14	Click Start New Session and select Keep Current Level.
03.20	Let’s start typing again.
03.23	Notice that initially the speed is 0. It increases or decreases as we type.
03.30	Click Pause Session.When we pause the typing speed remains at the same count.
03.38	Let us resume typing.
03.40	As the speed drops below 60, notice that, the red circle, next to Speed, is glowing.
03.47	This indicates that speed has fallen below the lower limit, that is 60 set for the speed.
03.54	Now, type the number 4 that is not displayed in the Teacher’s Line.
03.59	The Student’s Line turns red.
04.02	The Percentage of the Correctness drops too.
04.05	Can you see the spaces between set of characters or character given in the Teacher’s Line?
04.11	Now, I shall not press the Space bar after this word.
04.15	The Student’s Line has turned red again!
04.18	This means the spaces too must be typed in correctly.
04.22	Let us complete typing an entire line in the student’s line and then press Enter.
04.31	The Level has changed to 3!
04.33	Why does the level change to 3?This is because we have set the Workload to 1.
04.39	Therefore, when we complete one line for Level 2 and press Enter, we move to the next level.
04.47	Notice that new characters are displayed in the Teacher’s Line.
04.52	Do you want to know the scores of our typing session?
04.55	Click Lecture Statistics.The Training statistics "dialogue box" appears.
05.02	Let’s click on the "tabs" and see what each of them indicate.
05.07	Click on Current Training Session.
05.12	This displays the general statistics details, rate of typing, accuracy of typing, and details of the characters that you need to concentrate on.
05.22	The Current Level Statistics tab displays details similar to the one displayed in the Current Training Session tab.
05.31	The Monitor Progress tab displays a graphical representation of the progress of your typing.
05.38	Let us close this dialogue box.
05.41	You can also create your own "short cut keys".
05.45	What are short cut keys?
05.47	Short cut keys are combination of two or more keys, which can be pressed from the keyboard, instead of using the Menu options.
05.56	Let us configure a short cut key to view Lecture Statistics.
06.01	From the Main menu, click Settings, Configure "Short cuts".
06.06	The Configure Short cuts – KTouch dialogue box appears.
06.10	In the Search box enter Lecture Statistics.
06.16	Click Lecture Statistics. Select Custom and click None. The icon changes to Input.
06.24	Now, from the keyboard, press the "SHIFT and A" keys together.
06.30	Notice, that the icon now displays the letters "Shift+A". Click OK.
06.38	Now, press the "Shift and A" keys together.The Training Statistics dialogue box appears.
06.45	Click Close to exit.
06.49	KTouch also allows you to configure toolbars.
06.53	Let us say we want to display the Quit Ktouch command as an icon.
06.58	From the Main menu, click Settings, and click Configure Toolbars.
07.03	The Configure Toolbars – KTouch dialogue box appears.
07.07	In the left panel, from the list of option, select the Quit icon.Double-click on it.
07.15	The icon is moved to the right panel. Click Apply and then click OK.
07.22	The Quit icon is now displayed on the KTouch window.
07.26	This brings us to the end of this tutorial on KTouch
07.30	In this tutorial we learnt how to modify the training level, monitor the speed, and accuracy of typing.
07.38	We also learnt to configure keyboard short cuts and toolbars.
07.43	Here is an assignment for you.
07.46	Under Configure KTouch, change the Workload to 2.
07.50	Check the Complete whole training level before proceeding box.
07.56	Now open a new typing session and practice typing.
08.00	Finally, check your lecture statistics.
08.04	Watch the video available at the following link;
08.07	It summarises the Spoken Tutorial project.
08.10	If you do not have good bandwidth, you can download and watch it.
08.15	The Spoken Tutorial Team,
08.17	Conducts workshops using spoken tutorials.
08.20	Gives certificates for those who pass an online test.
08.23	For more details, please write to contact at spoken hyphen tutorial dot org.
08.29	Spoken Tutorial Project is a part of the Talk to a Teacher project.
08.33	It is supported by the National Mission on Education through ICT, MHRD, Government of India.
08.41	More information on this Mission is available at http://spoken-tutorial.org/NMEICT-Intro.
08.52	This tutorial has been contributed by DesiCrew Solutions Pvt. Ltd. Thanks for joining

Contributors and Content Editors

Krupali, Pratik kamble, Sakinashaikh