ExpEYES/C3/Transient-Response-of-Circuits/Khasi

From Script | Spoken-Tutorial
Revision as of 23:24, 3 November 2017 by Pdiangburom (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Time Narration
00:01 Khublei. Ngi pdiangsngewbha iaphi sha ka jinghikai halor ka Transient Response of circuits.
00:08 Ha kane ka jinghikai, ngin ia pule shaphang ka:

Transient response jong ka RC, RL bad LCR circuits Underdamped discharge jong ka LCR circuit RC integration bad Differentiation.

00:24 Hangne, nga pyndonkam da ka:

ExpEYES version 3.1.0 Ubuntu Linux OS version 14.10.

00:33 Ban bud ia kane ka jinghikai, phi dei ban don ia ka jingtip shaphang ka ExpEYES Junior interface. Lada phim don, na ka bynta ki jinghikai ba iadei, sngewbha leit sha ka website jong ngi.
00:44 To ngin ia define shwa nyngkong ia ka transient Response jong ka circuit.
00:49 Transient Response kadei how a circuit responds to stored energy in capacitors or inductors.

Ka energy ba lah stored ha u capacitor lane ha u inductor lah ban dissiapate da u resistor.

01:03 Mynta ngin ia batai ia ka transient Response jong ka RC circuit.
01:07 Ha kane ka experiment, ngin ia:

Plot ia ka Step up bad Step down voltage curves jong ka RC circuit. Measure RC in milli seconds.

01:18 Ban leh ia kane ka experiment OD1 lah connect sha ka A1 lyngba u 1K resistor.
01:24 1uF (one micro farad) capacitor lah connect hapdeng u A1 bad ground (GND).

Kane kadei ka circuit diagram.

01:34 To ngin ia peit ia ka result ha ka Plot window.
01:36 Ha ka Plot window, nion ha u EXPERIMENTS button. Jied RC Circuit.
01:43 Transient response of RC Circuit bad Schematic windows ka plie.

Schematic window ka pyni ia ka RC Circuit Transient.

01:52 Ha ka Transient response of RC Circuit window, nion ha 0 to 5V STEP button.

'Step up' voltage curve ka paw.

02:03 Nangta nion ha u 5 to 0V STEP button. Step down voltage curve ka paw.
02:11 Nion ha Calculate RC button. RC = 1.14 msec ka paw.
02:20 Nion ha u Clear button ban clear ia ka window.
02:24 Nion ha u CC Charge button. U horizontal trace la iohi ha u 4.5 volts.
02:31 Hadien kane, ngin ia pyni ia ka:

Charging jong u capacitor da ka constant current bad Ban thew ia ka RC ha ki milli seconds.

02:41 Ha ka circuit, ngin ia connect ia u 1K resistor sha u CCS ha ka jaka jong u OD1. Kane kadei ka circuit diagram.
02:51 Nion ha u CLEAR button ban pynkhuid ia ka window.
02:55 Nion ha u CC Charge button. Voltage lyngba u capacitor u nang kiew nang kiew stet.
03:03 Nion ha u Calculate RC button. Value jong u RC= 5.81 mSec lah pyni.
03:12 Mynta ngin ia batai ia ka transient Response jong ka RL circuit.
03:17 Ha kane ka experimenet, ngin ia:

Plot ia ka Step up bad Step down voltage curves jong ka RL bad Thew ia ka R/L.

03:26 Ha kane ka experiment,

IN1 lah connect sha u OD1. OD1 lah connect sha u A1 lyngba u 1K resistor. A1 lah connect sha u GND lyngba jong u coil.

03:38 Kane kadei ka circuit diagram.
03:41 To ngin ia peit ia ka result ha ka Plot window.
03:44 Ha ka Plot window, nion ha u EXPERIMENTS button. Jied ia ka RL Circuit.
03:51 Transient response of RL Circuit bad ka Schematic windows ka plie.

Schematic window ka pyni ia ka RL Circuit Transient.

04:02 Ha ka Transient response of RL Circuit window, nion ha u 0 to 5V STEP button.

'Step up' voltage curve lah pyni.

04:12 Nion ha u 5 to 0V STEP button. Step down voltage curve lah pyni.
04:20 Nion ha u Calculate R/L button ban pyni ia ki values.
04:26 L/R value kadei = 0.083mSec (milli second).

Rind value kadei =529 Ohm.

04:35 Inductor value kadei =127.6mH(milli henry).

Hangne- 'R' kadei resistance, 'L' kadei inductance bad 'Rind' kadei resistance jong ka inductor.

04:50 Kum ka assignment, plot ia ka voltage curves jong ka RL circuit da kaba pyndonkam ar tylli ki coils kiba lah connect ha ka series.
04:57 Mynta, ngin ia pyni ia ka underdamped discharge jong ka LCR circuit.
05:02 Ha kane ka experiment, OD1 lah connected sha u A1 lyngba u coil.
05:07 A1 lah connect sha u GND lyngba u 0.1uF (0.1 micro farad) capacitance. Kane kadei ka circuit diagram.
05:15 To ngin ia peit ia ka result ha ka Plot window.
05:18 Ha ka Plot window, nion ha u EXPERIMENTS button. Jied RLC Discharge.
05:25 EYES Junior: RLC Discharge window bad Schematic windows ka plie. Schematic window ka pyni ia ka RLC Circuit Transient.
05:35 Ha ka EYES Junior: RLC Discharge window, nion ha u 5->0V STEP button. Step down voltage curve ka paw.
05:45 Pyniaid ia u mS/div slider bad nion ha u 5->0V STEP button. Underdamped discharge curve ka paw.
05:55 Nion ha u FIT button ban pyni ia ki values.

Resonant Frequency = 1.38 KHz bad Damping = 0.300.

06:08 Kum ka assignment-

Plot ia ka overdamped discharge jong ka LCR circuit da kaba pyndonkam ia u 2K resistor. Kane kadei ka circuit diagram.

06:18 Mynta, ngin ia batai ia ka RC integration.
06:21 Ha kane ka experiment, ngin ia pynkylla ia ka square wave sha u triangular wave.
06:28 Hangne, SQR2 lah connect sha u A1 lyngba u 1K resistor. Kane kadei ka circuit diagram.
06:34 To ngin ia peit ia ka result ha ka Plot window.
06:38 Ha ka Plot window, set ia ka SQR2 sha 1000 Hz. Nion ha u SQR2 check-box.
06:45 Pyniaid ia u frequency slider.
06:48 Pyniaid ia u mSec/div slider ban antad ia ka wave. Ka square wave lah generate.
06:56 Ha kajuh ka connection, connect ia u A1 sha u GND lyngba u1uF (one micro farad) capacitor. Kane kadei ka circuit diagram.
07:05 U triangular wave u lah generate. U square wave u lah kylla sha u triangular wave ynda u RC u lah khleh lang.
07:14 Nion ha u XMG button ban pyni ia ka Grace plot jong u triangular wave.
07:20 Mynta, ngin ia batai ia ka RC differentiation.
07:24 Ha kane ka experiment ngin ia pynkylla ia u square wave sha u narrow spikes wave.
07:31 Ha kane ka experiment SQR2lah connect sha u A1 lyngba u 1uF (one micro farad) capacitor. Kane kadei ka circuit diagram.
07:40 To ngin ia peit ia ka result ha ka Plot window.
07:43 La pynmih sei ia u square wave.
07:46 Ha kajuh ka connection, connect ia u A1 sha u GND lyngba u 1K Resistor. Kane kadei ka circuit diagram.
07:55 Ha ka Plot window, set ia u SQR2 sha 100 Hz.
08:00 Pyniaid ia u mSec/div slider ban antad ia ki waves. U narrow spikes wave u lah generate.
08:08 U square wave u lah kylla sha u narrow spikes wave ynda u RC u lah shah pyniapher.
08:15 Nion ha u XMG button ban pyni ia ka Grace plot.
08:19 To ngin ia batai kyllum.
08:21 Ha kane ka jinghikai, ngi la pule shaphang:

Transient response jong u RC, RL bad LCR circuits Underdamped discharge jong u LCR circuit RC integration bad Differentiation.

08:36 Kane ka video ka kyllum lang ia ka Spoken Tutorial project. Lada phim don ia ka bandwidth kaba biang, phi lah ban shu download bad peit ia ka.
08:44 Ngi pynlong ia ki workshops da kaba pyndonkam ia ki Spoken Tutorials bad ai certificates. Sngewbha contact sha ngi.
08:51 Ia ka Spoken Tutorial project lah bei pisa da ka NMEICT, MHRD, Sorkar India.
08:57 Ia kane ka jinghikai lah noh synniang da U Pdiangburom na Shillong. Khublei shibun.

Contributors and Content Editors

Pdiangburom