Skill-Development--Fitter/C2/Filing-a-workpiece/Khasi

From Script | Spoken-Tutorial
Revision as of 13:27, 7 August 2017 by Hezekiah2016 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Time Narration
00:00 Khublei bad Pdiang sngewbha sha kane ka Spoken Tutorial halor Filing a Workpiece
00:07 Ha kane ka tutorial, ngin pule,
00:10 Kaei ka filing?
00:12 KI tiar bapher ba pyndonkam naka bynta ka filing
00:15 Ki jaid filing ba bun rukom.
00:17 Kumno ban file ïaka workpiece
00:22 Bad ki jingbakla ba kyllum haka por filing
00:24 Naka bynta kane ka tutorial ngi donkam
00:27 U file, Ka workpiece ban filed
00:31 Ka Bench Vice ban bat ïaka workpiece
00:34 Ka Vernier Calliper ban thew
00:37 Ka Try Square ban check ïaka workpiece's squareness
00:42 Ka Hack saw ban ot ïaka workpiece
00:45 U Punch ban buhdak haka workpiece
00:48 Bad u Ball pein hammer
00:51 Nyngkong to ngin peit, kaei ka filing.
00:54 Ka Filing kadei ka rukom ban weng ïaki tiar bala tam naka job lane ka workpiece pyndonkam u file.
01:02 Ki don bun jaid ki files naka bynta ki jingdonkam ba pher.
01:07 U Flat file, naka bynta ka rectangular cross-section
01:11 U Smooth file : ban ioh ïaka sla kaba jlih.
01:15 U Safe edge file : naka bynta ban file ïaka bynta right angle jong ka workpiece
01:21 U Square file : ban pynioh ïaki kyndong bad ki thliew ba sawdong
01:27 U Half run file : Ban file ïaki sla ba semi-spherical.
01:32 Bad u Round file : ban pynioh ïaki thliew bad ki rud nur ba pyllun.
01:38 To mynta ngin pule ïaka rukom ban filing.
01:41 Ka jingdonkam jong nga kadei ka 5 by 3 inch workpiece.
01:46 Ka job lane ka work-piece kaba nga don kadei ka 5 by 4 inches.
01:52 Te, to ngin ot shwa ïa bynta ba 1 inch kaba tam.
01:58 Na bynta kane, tah ïa u marking medium haka work-piece.
02:03 Phi lah ban pyndonkam da u chalk lane ka sia kum ka marking medium.
02:08 Shisien ba lah tah ïa u medium, buhdak ïaka work-piece pyndonkam u jenny calliper, kumba la pyni.
02:15 Te, nga buhdak ymduna ïaka 1 inch kat kum ka jingdonkam jong nga.
02:21 Kaba bud, pyndonkam u punch bad u ball pein hammer ban punch ha u laiñ bala buhdak.
02:28 Hadien kane, buh ïaka work-piece markhap bad ki tyngam jong ka Vice.
02:34 Mynta pynskhem ïaka ba kan bat ïaka work-piece shi jaka.
02:38 Kane ka long khnang ba ngin lah ban ot ïaka work-piece dakaba suk.
02:42 Kaba bud, shim ïaka hack saw bad ot ïaka bynta batam jong ka work-piece.
02:48 Shisien ba lah weng ïaki bynta ba tam, thew biang ïaka work-piece sa shisien.
02:54 Hooid, ka jingthew ka lah biang mynta. Nga don ka 5 by 3 inches .
03:00 Mynta, to ngin sdang ka filing.
03:02 Nyngkong ngi donkam ban jied u file uba ïadei.
03:06 Nga donkam ka rud kiba jlih, te ngin jied ïa u Smooth file.
03:11 Pyn thikna ba lah pynskhem bha ïa u handle jong u file.
03:16 Wat ju pyndonkam ïa u file khlem u handle uba biang.
03:19 Phi lah ban pyn mynsaw ïaki kti jong phi.
03:22 Pynthikna ba u file u long uba khuid shwa ba phin sdang ban filing.
03:27 Haba pyndonkam ki files kiba sarang, kin pynsniew ïaka work-piece bad ruh kin pyn mong ïaki kti jong phi.
03:34 Te, mynta nga la jied ïa u file uba dei.
03:38 Ka synjam babud kadei ban buh pynskhem biang ïaka work-piece haka Bench vice.
03:45 Ieng ïalade ha 90 degree dakaba pynieng bad ka Bench vice.
03:51 Buh ïaka kjat kadiang sha khmat bad ka kjat kamon shadien.
03:57 Kane kadei ka rukom ïeng ba biang eh ban leh filing.
04:00 Mynta batskhem ïa u handle jong u file haka kti kamon jong phi.
04:05 Daka kti kadiang jong phi, bat ïa u khlieh jong u file kumba la pyni.
04:10 Pynthikna ba, ka kti kmie kamon ka ñion eh ïa u handle jong u file.
04:15 Mynta ngi la long ban sdang ban filing.
04:18 Kidon lai tylli ki rukom jong ka filing. Ki long :
04:21 Straight forward filing
04:23 Draw filing
04:25 Diagonal lane cross filing.
04:28 To ngin peit ïaki kawei hadien kawei.
04:30 Kaba pynïaid ïa u file haka jingjrong jong u haka sla jong ka work-piece la khot ka Straight forward filing.
04:38 Ha kane ka rukom, ka filing la leh dakaba pyniaid suki ïa u file shajrong bad shapoh.
04:44 Phi lah ban iohi bala filed ïaka work-piece jong phi bad bala weng ïaki tiar ba tam.
04:51 Haka rukom Draw filing, ïa u file la tan shajan ka met haka pressure kaba ïa ryngkat.
04:58 Haka rukom Diagonal filing, ïa u file la pynïaid pynkiang halor jong ka sla jong ka work-piece.
05:06 Ka jingïaid jong u file ka long na kawei ka dong jong ka work-piece sha kawei pat, da pyngkiang.
05:13 Shisien ba lahdep iaka filing , ngi donkam ban peit ïaka flatness bad squareness jong ka sla jong ka work-piece.
05:21 ïa kane la leh daka jingïarap jong ka Try-Square bad Vernier calliper.
05:26 Ban peit lada ka flatness ka long bha ne em, buh ïa u Try-square haka work-piece kumba la pyni.
05:33 Leh kumta haki lai tylli ki jaka bapher haka work-piece.
05:38 Peit ïa kane pyrshah ïaka jingwan ka jingshai.
05:41 Kane ka kdew shai bha ïa ka flatness.
05:44 Lada ka sla kam beit, te phi lah ban iohi ïa ki jingshai hapdeng jong ka work-piece bad ka Try-square.
05:52 Ha kum kita ki khep, phin donkam ban file biang.
05:57 Kaba bud, ngin peit ïaka squareness jong ka work-piece dakaba pyndonkam ka Try-square.
06:03 Buh ïaka Try-square ha kyndong jong ka work-piece, kumba la pyni.
06:07 Mynta ktah ïaki rud jong ka Try-square haki bynta ba markhap jong ka work-piece, kumne.
06:14 Peit hato ki bynta ba ïa khap jong ka work-piece ki long ne em 90 degrees I wei ïa iwei pat.
06:20 Lada em, te file biang.
06:23 Sa kawei ka jingthew kaba ngi donkam ban leh ka long ban peit ïaka jingrben jong ka work-piece.
06:29 Na bynta kane, ngi dei ban pyndonkam u Vernier calliper.
06:33 Buh ïaka work-piece hapoh jong ki tyngam jong u Vernier calliper, kumba la pyni.
06:38 Thew ïaka jingrben jong ka work-piece.
06:41 Mynta leh biang ïa kane haki lai tylli ki jaka bapher jong ka work-piece.
06:47 Ki jingthew kiba ïasyriem ka kdew ba ka work-piece ka ïa ryngkat haka jingrben.
06:53 Mynta kadei ka por ban pule kaei ban ym leh haka por filing.
06:57 Wat ju file ïaka work-piece haka angle
07:00 Wat ju file ïa baroh ar ki tduh jong ka work-piece bad ïaid lait ïaka bynta pdeng jong ka.
07:05 Dakane ngi lahpoi sha kaba kut jong kane ka tutorial.
07:08 To ngin batai lyngkot, ha kane ka tutorial, ngi la pule
07:12 Ban thew ïaka workpiece
07:14 Weng ïaki bynta ba tam jong ka workpiece
07:17 File ïaka workpiece
07:20 ka video bala pyni harum Ka batai lyngkot ïaka Spoken Tutorial project. Sngewbha download bad peit ïaka
07:27 Ka Spoken Tutorial Project Team Ka pynlong workshop bad Ka ai certificates sha kito kiba pass ïaka on-line test jong ngi.
07:35 Ban tip kham bniah, sngewbha thoh sha ngi
07:38 ïaka Spoken Tutorial Project la kyrshan daka NMEICT, MHRD, Sorkat India.
07:45 Khambun ka jingtip halor kane ka mission kadon ha ka link harum.
07:51 ïa kane ka tutorial la shna thik tang naka bynta ka National Instructional Media Institute, Chennai
07:59 ïa kane ka script la pynkylla sha ka ktien Khasi da I Hezekiah Lyngdoh na Shillong
08:07 Khublei ba phi la ïasnohlang

Contributors and Content Editors

Hezekiah2016