Scilab/C4/User-Defined-Input-and-Output/English

Title of script: User defined Input/output in Scilab

Author: Anuradha Amrutkar

Keywords: input, mprintf, save() , load()

Visual Cue	Narration
Slide	Welcome to this spoken tutorial on User-defined Input and Output using Scilab.
Slide	In this tutorial, we will learn Input Function Formatting the Output save function load function
Slide	System Requirements For Demonstration: Ubuntu Linux12.04 operating system is used with Scilab version 5.3.3 installed
Slide	Pre-requisites: You should have Basic knowledge of Scilab. If not, for relevant spoken tutorials please visit spoken hyphen tutorial dot org
Slide	Input Function: The input() function is used to take the input from the user. It provides a prompt in the text string for user input. It waits for input from the keyboard. If nothing but a carriage return is entered at the prompt, input() function returns an empty matrix.
Slide	The input function can be written in two ways . First ,x= input(message to display) Second,x= input("message to display","strings") In the second example, the second argument is “string”. So the output is a character string, which is the expression entered using the keyboard.
Scilab Console --> x = input (“ Enter your age”) --> y = input (“ Enter your age”, “string”)	Switch to the Scilab Console window and type, -->x is equal to input open bracket inside double quotes Enter your age close the double quotes close the bracket and press enter.Type 25 and press enter Now type -->y is equal to input into bracket into double quotes Enter your age close the double quotes comma again inside double quotes write string close the bracket. and press enter type 25 and press enter
	We see that in both the cases the input we entered through a keyboard, was a number 25.
	Now, let us check the type of variable that x and y are. Let us clear the console using the clc command. We are doing this to validate the use and importance of the argument “string”, given in the second example.
-->typeof(x) -->typeof(y)	To check the type of variable, let us type -->typeof(x)and press enter similarly; -->typeof(y) and press enter
	You can see it yourself, that the first answer stored in x is of type constant and second answer stored in y, with the argument “string” included in the command, is of type string.
Slide	Let us now see how to format the output that is displayed on the console. This can be done using the mprintf() function. mprintf() function converts, formats and writes data on to the Scilab console. It is an interface for C-coded version of printf function.
	Let us see an example for this.Switch to the console
Scilab console -->mprintf("Value of x=%d is taken as a CONSTANT, while value of y=%s is taken as a STRING", x , y) Value of x=25 is taken as a CONSTANT,while value of y=25 is taken as a STRING	Type-->mprintf into bracket into double quotes type iteration to percentage i result is colon slash n alpha equal to percentf comma 335 close the bracket 0.535 the message will be displayed as a CONSTANT comma while value of y is equal to percentage s is taken as a STRING close double quotes comma x comma y close the bracket In the above example percentage d is used to insert an constant data stored in variable x and percentage s is used to insert a string data stored in variable y.
Slide	Now, let us discuss the use of save and load command. To quit Scilab midway through a calcula- tion and continue at a later stage type --> save thissession This will save the current values of all variables to a file called thissession. This file cannot be edited. It is in binary format. When you next start Scilab, type --> load thissession and the computation can be resumed where you left off. The purpose of save and load function are The save() command saves the scilab current variables in a binary file. If the variable is a graphic handle, the save function saves all the corresponding graphics_entities definition. The file can be given either by its paths or by its descriptor previously given.
Slide	* save(filename) saves all current variables in the file defined by filename. save(fd) saves all current variables in the file defined by the descriptor fd. save(filename,x,y) or save(fd,x,y) saves only named variables x and y.
Scilab Console --> a = eye(2,2) a = 1. 0. 0. 1. --> b = ones (a) b = 1. 1. 1. 1. --> save('matrix-a-b.dat', a, b)	Let us see an example to illustrate the save and load commands usage. Let us define two matrices say a and b -->a = eye(2,2) -->b=ones(a) --> save matrix-a-b or it can also be written as -->save('matrix-a-b.dat',a,b) This saves the values of variables in a binary file matrix-a-b.dat in the present working directory. You can browse the present working directory to check the existence of this binary file.
Scilab Console -->clear a b	Now let us load the file back in to the variables. Before this, let us clear the variables a and b -->clear a space b Let us cross check if these variables are really cleared. -->a !--error 4 Undefined variable: a -->b !--error 4 Undefined variable: b
Scilab Console --> load('matrix-a-b.dat', 'a', 'b')	Now let us load back the values from the binary files in these variables a and b using the load command. Load open bracket open single quote matrix dash a dash b dot dat close quotes comma inside quotes a comma inside quotes b close the bracket
--> a a = 1. 0. 0. 1. --> b b = 1. 1. 1. 1.	Let us check the values in variables a and b -->a -->b You can see the values are loaded back in the variables.
Summary	Let us summarize what we learnt - Input Function using input command Formatting the Output using mprintf command Save Function Load Function
Slide	Watch the video available at the link shown below It summarises the Spoken Tutorial project If you do not have good bandwidth, you can download and watch it
Spoken Tutorial Workshops	The Spoken Tutorial Project Team Conducts workshops using spoken tutorials Gives certificates to those who pass an online test For more details, please write to contact@spoken-tutorial.org
Acknowledgement	Spoken Tutorial Project is a part of the Talk to a Teacher project It is supported by the National Mission on Education through ICT, MHRD, Government of India More information on this Mission is available at: http://spoken-tutorial.org\NMEICT-Intro
	This is Anuradha Amrutkar from IIT Bombay Thank You for joining

Contributors and Content Editors

Lavitha Pereira, Sneha