OpenFOAM/C3/Using-PyFoam-Utilities/English

Tutorial : 22

Name : Using PyFoam Utilities

Script : Anmol Sahoo and Rahul Joshi

Narration : Rahul Joshi

Keywords : OpenFOAM, PyFoam, CFD, Linux, PyFoam utilities,shockTube

Visual Cue	Narration
Show Slide : Title	Welcome to the spoken tutorial on Using PyFoam Utilities
Show Slide : Learning Objectives	In this tutorial we will learn : About PyFoam Utilities How to use PyFoam Utilites How to run and plot data for the shockTube case using PyFoam Utilites
Show Slide : System Requirement	To record this tutorial I am using: Ubuntu Linux 14.04 OpenFOAM v2.3.0 PyFoam 0.6.5
Show Slide : Pre-requisite	As a prerequisite user should have : basic knowledge of running commands on the Linux terminal And some experience of running and analyzing OpenFOAM cases
Show slide : Introduction to PyFoam Utilities	Let me introduce you to PyFoam utilities. Utilities are Python programs which come inbuilt with PyFoam. Each utility has a specific function. Utilities are executed from the command line.
Show slide : List of Utilities Open terminal Type pyFoam and press Tab twice	List of utilites that can be viewed using tab completion Open the terminal The list of utilities can be viewed by typing pyFoam and then pressing Tab key twice
Show slide : List of utilities	Let me switch back to the slides. Each utility can be executed with the –help option This helps us to find out what it does and what its options are
Show Slide : using utilties	We are going to use the below PyFoam Utilities to run the Shock Tube case. We will use - PyFoamRunner.py PyFoamSamplePlot.py And then plot the necessary data using PyFoam
Show slide : PyFoamRunner.py	PyFoamRunner.py can be used to run cases It also generates log files for later use
Show slide : PyFoamSamplePlot.py	This utility is used to plot the various data obtained from the previously set up sampleDict.
Show slide : Problem definition Diagram	Shock Tube is an instrument - used to replicate and direct blast waves at a sensor to model actual explosion and their effects In this case, the rectangular tube has low pressure on the right side and high pressure on the left side. Both the pressures zones are seperated by a thin diaphgram.
Type run/tutorials/compressible/rhoCentralFoam	Open the Terminal and type the path for rhoCentralFoam inside compressible solver.
Type ls	Type ls
Type the command shown in Narration column	Type: cd $FOAM_TUTORIALS/compressible/rhoCentralFoam/
Type ls	Now type ls. You can see the shockTube case
Type cd shockTube	Type cd shockTube
Point to the 3 files	You can see three folders 0.org , constant and system.
On Terminal type cp -r 0.org 0	We need to copy the 0 file from 0.org So type cp -r 0.org 0
Type cd system	Now, go to the system folder by typing cd system
Type gedit sampleDict	Open the sampleDict file using gedit.
In sampleDict file, do as narrated	Go to the bottom of the file and Remove U.Component(0). Replace it with Ux Uy and Uz. Remove rho as well.
Save the file and exit	Save and exit the file.
Type cd ..	Go one level back by typing cd ..
Type blockMesh	Run the command blockMesh to mesh the geometry.
Type setFields	After this type setFields to set the pressure boundary condition.
Type pyFoamRunner.py rhoCentralFoam	Now we will use the pyFoam utility of pyFoamRunner.py Type pyFoamRunner.py <followed by name of the solver > i.e. RhoCentralFoam This runs the case and creates a postProcessing log.
Switch to the terminal and type ls	Go back to the terminal and type ls. We can see the log files which are generated.
Type sample	Now type sample to run the sample utility.
Type pyFoamSamplePlot.py ./ --dir=postProcessing/sets –info	After this we can plot for various time steps using- pyFoamSamplePlot.py ./ --dir=postProcessing/sets –info This will show which fields we have with us.
Type pyFoamSamplePlot.py ./ --dir=postProcessing/sets --field=T --mode=timesInOne | gnuplot	Then type pyFoamSamplePlot.py ./ --dir=postProcessing/sets --field=T --mode=timesInOne | gnuplot
	The output generated will be a png file.
Type ls Highlight/point to the png file	Type ls. We can see the png file which is generated.
Show slide : Summary	Let us summarize. In this tutorial, we learnt about PyFoam Utilities. We also learnt to- Check for various pyFoam utilities pyFoamRunner.py to run the solver pyFoamSamplePlot utility to generate a png file
Show Slide Forum to answer questions	Please post your timed queries in this forum.
Show Slide Forum to answer questions	Please post your general queries on OpenFOAM in this forum.
Show Slide Textbook Companion	The FOSSEE team coordinates the TBC project.
Show Slide Acknowledgement	The Spoken Tutorial Project is funded by NMEICT, MHRD, Govt. of India For more details , visit this website.
Thank You	This is Rahul Joshi from IIT Bombay signing off. Thanks for watching

Contributors and Content Editors

Nancyvarkey, Viraj20feb