KiCad/C2/Designing-circuit-schematic-in-KiCad/Khasi

From Script | Spoken-Tutorial
Revision as of 10:49, 31 December 2016 by George 030390 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Time Narration
00:01 Paralok baieid, Ngi pdiang sngewbha ia phi sha ka Spoken Tutorial halor ka “Designing circuit schematic ha ka Kicad”.
00:08 To ngin peit ia ki kyndon (lain) kumno ban leh 'PCB' designing .
00:12 Ka bynta ba nyngkong ka long ban shna schematic na ka bynta ka circuit ba la buh
00:16 Ka bynta kaba ar ka long ban pynmih (generate) netlist.
00:19 Ka bynta ba lai ka long ban leh mapping (map) ia ki components kiba iadei bad ka footprints.
00:22 Bad ka bynta kaba saw ka long ban shna board layout ia ka circuit.
00:27 Ha kane ka jinghikai ngin ia pule ia ki bynta ba nyngkong, kata ka long
00:32 Ban shna ia ka schematic na ka bynta ka circuit ba la buh.
00:35 Hangne ngi pyndonkam da ka Ubuntu 12.04 kum ka operating system
00:40 Bad da ka KiCad version: 2011 hyphen 05 hyphen 25'” na ka bynta kane ka jinghikai
00:49 Khyndiat ka jingtip shaphang ka electronic circuit ka long kaba donkam ha kane ka jinghikai
00:56 Ngin pyndonkam da ka Astable multivibrator kum ka circuit ba shu ai nuksa ha kane ka jinghikai
01:04 Ban sdang ia ka KiCad -
01:05 Leit hajrong sha kadiang duh jong ka Ubuntu desktop screen.
01:08 Click ha u icon ba nyngkong kata kaba mut u Dash home.
01:12 Ha ka search bar, thoh: 'KiCad' bad nion (press) Enter.
01:19 Ka KiCad main window kan sa paw ha ka screen.
01:22 Da kynmaw ba ha ka Ubuntu 12.04, ka menu bar jong ka KiCad ka paw ha ka panel ba hajrong jong ka Ubuntu desktop.
01:30 Ban sdang ia ka project, click ia ka File bad nangta pat sa clcik New.
01:35 Ai ia ka kyrteng jong ka project. Kum ka nuksa, "project1".
01:42 Kynmaw ba kane ka project kan shah saved da ka '.pro' extension.
01:47 To ngan pynheh ia ka window khnang ban iohi kham bha.
01:52 kynmaw ba hangno ba la saved ia ka project jong phi bad pynkylla ia ka directory lada donkam
01:58 Bad sa Click Save.
02:01 Ia ka Circuit schematics la shna ha ka KiCad da kaba pyndonkam ia ka EESchema.
02:06 Peit ngan pyni ha phi kumno ban sdang ia ka 'EESchema' ha ka KiCad.
02:10 U tab ba nyngkong ha ka panel ba hajrong jong ka KiCad main window la ju khot 'EESchema' lane schematic editor.
02:19 Haba click ia u 'EESchema' tab kane kan plie ia ka schematic editor.
02:23 Ka Info dialog-box kan paw kaba ong ba kam lap ia ka schematic.
02:28 Bad sa click OK.
02:32 To ngin shna hangne ia ka circuit schematics.
02:35 Leit sha ka panel ba sha kamon jong ka 'EESchema' window.
02:38 Bad sa click Place a component button.
02:42 Mynta, click ha kaba suda (blank) jong ka 'EESchema' window.
02:46 Kine ki component selection window kin sa plie.
02:49 Mynta, ngin buh ia u 555 timer IC schematic ha ka EESchema window.
02:56 Ha ka Name field jong ka component selection window, thoh "555" bad sa click OK.
03:05 Kane kan pyni ia ka jubab ba ngi wad kum ka LM555N.
03:11 Jied ia kane ka jubab ba mih bad sa click OK.
03:14 Ka component’s schematic kan paw ha ka EESchema window.
03:19 Kan sa iateh bad u cursor jong phi.
03:22 Buh ia u component ha ka centre jong ka screen da kaba click shisien.
03:27 Ban pynheh bad pynrit, ban iohi kham bha, pyndonkam da u scroll button jong u mouse.
03:35 Buh ia u cursor ha ki component kaba phi kwah ban pyheh bad pynrit.
03:39 Phi lah ruh ban pyndonkam ia u 'F1' bad 'F2' keys ban pynheh bad pynrit hajuh ka por.
03:46 Phi lah ban iohi lane ban ym iohi ia ka 'VCC bad 'GND' kata kaba mut ka ground terminal jong ka '555 IC'.
03:56 Lada phim iohi ia ka, leit sha ka panel ba sha kadiang jong ka EESchema window,
04:00 click ha u Show hidden pins button.
04:04 Mynta, ngin buh ia u resistor ha ka EESchema window.
04:09 Ia ka Place a component option lah dep ban jied lypa da ma ngi.
04:13 Te, sa shu click beit ha u EESchema bad phin iohi ia ki component selection window.
04:21 Ha ka Name field, thoh 'r' bad sa click OK.
04:26 Ka Resistor schematickan ka paw ha u EESchema uban sa iateh bad u cusor jong phi.
04:32 Buh ia u resistor sha jan jong u EESchema da kaba click shisien.
04:37 Ngi donkam sa artylli ki resistors.
04:39 Ngi lah ban ioh artylli ki resistors da kaba pyndonkam ia u Place a component button.
04:42 Hynrei, namar ngi la da don lypa ia u resistor, to ngin peit kumno ban copy ia ki component.
04:48 Ban bud ia ki component, click na kamon jong ki cpmponent bad sa jied Copy Component.
05:01 Ka copy jong ki component kan sa iateh bad u cursor jong phi.
05:05 Buh ia u resistor sha jan jong u EESchema da kaba click shisien.
05:11 Ia kane lah ban leh kham sted da kaba pyndonkam da u shotcut'c'.
05:16 Na ka bynta kane, buh ia u cursor ha ki component bad sa nion 'c'.
05:22 Kumjuh biang kan sa iateh lang bad u cursor jong phi
05:27 Click shisien ban buh ia ka.
05:30 Ka list jong ki shortcuts lah ban ioh da kaba nion Shift bad ? (question mark) key.
05:36 Kine ki long ki list jong ki keyboard shortcuts.
05:40 Khang ia kane ka window.
05:43 Click ha u EESchema window ban plie ia ka component selection window.
05:49 Nangta pat, ngi donkam artylli u capacitors, electrolytic bad ceramic.
05:53 Thoh "cp1" ban add electrolytic capacitor bad click OK.
06:00 Thoh 'c' ban add ceramic capacitor bad click OK.
06:06 Ngi donkam ruh ia ka Light Emitting Diode, ba ju tip kum ka 'LED'.
06:10 Ha ka component selection window, thoh: "led" bad sa click OK.
06:17 Mynta, ngi donkam ia ka bor lait kata kaba mut ka 'Vcc' bad ki Ground terminals.
06:22 Ha ka panel ba sha kamon jong ka EESchema, click ia u Place a power port button.
06:29 Click shisien ha u EESchema ban plie ia ki component selection window.
06:34 Click ia ka List All button bad phin iohi ia ka list jong bun jait ki power notations.
06:40 Jied +5V (plus 5 volt) bad sa click OK.
06:48 Buh ia ki component da kaba click shisien ha ka EESchema window.
06:52 Kumjuh ruh, ban ioh ka ground terminal,
06:54 Jied ground from the list and click on OK.
07:01 To ngan jied da ki ground terminal...
07:08 Ngi donkam ruh ia u connector ban pyndait ia ka bor ding (power supply) ba na shabar.
07:14 Click ha u EESchema ban pie ia ki component selection window.
07:19 Click ha ka List All button bad phin iohi ia ka list.
07:24 Jied conn option bad sa click OK.
07:31 Tan shapoh bad jied CONN_2 na ka list bad sa click OK.
07:41 Artylli ki terminal connector kin sa paw. Kine kin sa iateh bad u mouse pointer.
07:48 Click shisien ban buh ia ka.
07:56 Mynta, ngin buh ryhtih ia ki components da kaba pynkhih ia ki sha ka jaka kaba biang.
08:01 Ngin pyndonkam da ki shortcut key 'm' ban pynkynriah ia ki components.
08:04 Ban pynkhih ia u component, buh ia u mouse-pointer ha u component, shu ong u 'resistor', bad sa nion 'm'.
08:15 Ngin buh ia une u resistor sha kamon jong ka IC 555 da kaba click ha u EESchema.
08:28 Ngin pyndonkam da ki (keyboard) shortcut key 'r' ban pynshad ia u 'LED' bad pynbeit ia u da k aba pyn-ieng.
08:40 Mynta, ngin peit kumno ban pyniadait lane wire ia ki components kat kum ka circuit diagram.
08:45 To ngin sdang ia ki jingpyniadaitjong ki components.
08:48 Ha ka panel ba sha kamon jong ka EESchema, click ha u Place a wire button.
08:56 Mynta ngin pyndait ia artylli ki resistors.
08:58 Ngin pyndait ia u wire da kaba click ha uno uno u nodes jong artylli ki resistors.
09:11 Mynta, ngin pyndait ia u 7th pin jong ka IC 555 sha u wire ba pyndait ia artylli ki resistor.
09:18 Click ha u 7th pin jong ka IC 555 bad nangta ha u wire ba pyndait ia artylli ki resistors.
09:30 Buh jingmut ba kane kan sa pynkylla hi kum ka lad kaba paw kum u node.
09:35 Nga lah dep lypa ban ipyndait ia u component bad saved ia ki.
09:39 Mynta ngan plie bad pyndonkam da ka schematic ba la dep shna lypa ban bate ia ka por.
09:44 Ngan leit sha ka File menu bad click Open.
09:53 Ka Confirmation window kan plie. Click Yes.
10:04 Ngan jied da ka 'project1.sch' na ka jaka ba la buh.
10:18 To ai ba ngan resize kane ka window kaba nyngkong
10:22 Bad nangta ngan sa click Open.
10:29 Ngan click Open.
10:33 Kane ka dei ka schematic ba la dep shna ha shuwa
10:36 Mynta ngi lah ban iohi kumno ban ai jingbatai ia ki component
10:39 Ki jingbatai ba pynrung ha ki dur ne ki dak ki ai ia ka jingithuh bapher ia man la ki component.
10:43 Annotating kan kylliang ia ki dak jingkylli jong ki components da ki numbers kiba pher.
10:50 Hajrong jong ka panel jong ka EESchema, click ha ka “Annotate schematic” button.
10:58 Kane kan plie ia ka Annotate Schematic window.
11:02 Ha kane ka window, buh ia ka configuration kumba ka long.
11:05 Click ha ka Annotation button.
11:09 Kane kan maham ia phi ba kan annotate tang ia ki un-annotated components.
11:13 Click OK.
11:15 Click ha u Close button jong ka Annotate Schematic window.
11:20 Da kynmaw ba ki dak jingkylli ha ki components la dep bujli da ki unique numbers.
11:30 Click ha ka File
11:37 Bad jied da ka Save Whole Schematic Project ban save ia kane ka schematic.
11:43 Click ha ka File bad jied Quit.
11:48 Kane kan khang ia ka EESchema window.
11:50 Mynta, leit sha ka KiCad main window.
11:53 Click ha ka File bad jied Quit.
11:56 Kane ka pynkut ia ka jimthmu jong ka jinghikai ha kaban shna ia kacircuit schematic da ka KiCad.
12:01 To ngin batai kyllum ia kaei kaba ngi la nang ha kane ka jinghikai
12:05 Ha kane ka jinghikai, ngi la nang
12:07 * Kumno ban pyndonkam ia ka EESchema ha ka KiCad ban shna circuit schematic.
12:11 * Annotation jong ka circuit schematic.
12:15 Pyndep ia kine ki assignment harum-
12:17 Buh ia ki component 'Inductor' ha ka EESchema da kaba pyndonkam da ka component selection window.
12:24 Pyniar ia ki shortcut keys 'a', 'x' and 'y'.
12:31 Peit ia ka video kaba don ha ka link harum.
12:35 Kan batai kyllum ia ka Spoken Tutorial project.
12:37 Lada phim don ia ka bandwith kaba biang, sa shu download bad peit.
12:43 Ka Spoken Tutorial project team:
12:45 * Ka ai ki jingai jinghikai (workshops) da kaba pyndonkam da ki spoken tutorials.
12:48 * Ka ai certificates ruh ia kito kiba pass ia ka onlain (online) test.
12:52 Ban tip bniah, sngewbha thoh sha ka:

Contact at spoken hyphen tutorial dot org.

12:59 Spoken Tutorial project ka dei shibynta jong ka Talk to a Teacher project.
13:03 La kyrshan ia kane da ka National Mission on Education lyngba ka ICT, MHRD, ka Sorkar India.
13:09 Shibun ki jingtip kiba iadei bad kane ka jingthmu ka don ha ka:
13:13 spoken hyphen tutorial dot org slash NMEICT hyphen Intro.
13:20 Ia kane ka jingthoh (script) la noh synniang da u George B. Warjri.
13:25 Nga dei u John na Meghalaya, ngan pynkut noh. Khublei shibun.

Contributors and Content Editors

George 030390, PoojaMoolya