Biogas-Plant/C2/Benefits-of-Biogas/English
| |
Narration |
| Slide 1
Construction of the mixing tank [[Image:]] |
Hello everyone and welcome to this Spoken Tutorial on construction of the mixing tank.
This is an activity to be done on Day 2. |
| Slide 2
Learning Objective We will learn :
|
In this tutorial, we will learn-
|
| Let’s first understand-
The Significance of the mixing tank and shape of the mixing tank. | |
| [[Image:]]
Show the dimensions on this image |
Mixing tank is where biomass is mixed with water and passed into the digester tank.
The mixing tank is usually cylindrical in shape. |
| Image of mixing tank[[Image:]] | A mixing tank of height 2 feet and diameter 22 inches -
|
| [[Image:]] | * For example, 25 kgs of manure should be mixed in 25 liters of water.
|
| Slide 3
Construction of the mixing tank. Step by step procedure to construct the mixing tank |
Let’s see the construction of the mixing tank. |
| Slide 4
Construction of mixing tank For construction following items are used: [[Image:]] [[Image:]] [[Image:]]
[[Image:]] |
For construction, following items are used-
|
| Slide 5
Construction of the mixing tank. Step by step procedure to construct the mixing tank |
The Step-by-step procedure to construct the mixing tank is as follows |
| [[Image:]] | Spread the Weldmesh sheet of 69 inches x 24 inches on the ground.
|
| [[Image:]] | Now tie the loose ends, end to end with steel wire.
We need to make a cylinder like structure with diameter 22 inches and height 24 inches. |
| [[Image:]] | Note that the hole has to be at the base of the mixing tank. |
| [[Image:]] | Now, place newspaper or any other paper inside the structure.
The paper will help hold the sand that will be filled inside this structure. |
| [[Image:]] | Pour sand up till the brim of the structure.
This will give firmness to the mesh while plastering the outer wall. |
| [[Image:]] | Now, we will plaster the outer wall of the mixing tank.
Prepare cement mixture as follows-
Note- that no gravel is used in this mixture. |
| [[Image:]] | Start plastering the outside wall of the mixing tank as shown here. |
| [[Image:]]
[[Image:]] |
Finally smoothen the plastering using a wooden trowel.
The mixing tank should be left overnight for curing. |
| [[Image:]] | Next day, take out all the sand placed inside the mixing tank.
This must be done carefully so as to not break the plastered outer wall of the mixing tank. |
| [[Image:]]
[[Image:]] |
Once the sand is taken out, plaster the inside wall of the mixing tank.
Prepare fresh cement mixture as was prepared for outer wall of the mixing tank. Spread half inch of this mixture on the inside wall. While plastering, please remember the position of the hole that is at the base. We need to break the plaster from here, later. |
| [[Image:]] | Let the plaster on the inside wall dry for 6-7 hours.
After 6-7 hours, remove the plaster at the position of the hole by slightly tapping it. |
| At this point the mixing tank is ready to be transferred to the actual plant site. | |
| Remember -
The following has to be completed on same day i.e day 2 of civil work Hence, the mason has to plan accordingly. | |
| This brings us to the end of this tutorial. | |
| Assembly of the mixing tank for the Biogas plant will be explained in a later tutorial. | |
| Slide 6
Summary In this tutorial, we have learnt:
|
Let us summarize,
In this tutorial, we have learnt-
|
| Slide 6
Acknowledgements
|
* This video was created by Spoken Tutorial project with inputs from Rural-ICT Project, IIT Bombay.
|
| Pictures and technology support:
Courtesy: Bhagirath Rural Development foundation Village- Zarap, Taluka- Kudal, Dist.- Sindhudurg | |
| This is Bella Tony along with the Animation team from Spoken Tutorial Project, IIT Bombay signing off.
Thank you for joining. |
