PERL/C3/Access-Modifiers-in-PERL/Gujarati

Time	Narration
00:01	Spoken Tutorial on Access Modifiers in PERL પરના આ સ્પોકન ટ્યુટોરીયલમાં સ્વાગત છે. .
00:07	આ ટ્યુટોરીયલમાં આપણે આપણે શીખીશું: Scope of variables Private variables Dynamically scoped variables Global variables
00:19	આ ટ્યુટોરીયલ માટે હું ઉપયોગ કરી રહી છું: Ubuntu Linux 12.04 operating system Perl 5.14.2 અને gedit Text Editor.
00:32	તમે તમારી પસંદગી અનુસાર કોઈ પણ ટેક્સ્ટ એડિટર વાપરી શકો છો.
00:36	તમને Perl પ્રોગ્રામિંગ વિષે સામાન્ય જાણકારી હોવી જોઈએ.
00:40	જો નથી તો સ્પોકન ટ્યુટોરિયલ વેબ સાઈટ પર ઉપલબ્ધ Perl ટ્યુટોરિયલ જુઓ.
00:47	ચાલો scope of variables. ના પરિચય સાથે શરૂઆત કરીએ.
00:51	વેરીએબલ નું સ્કોપ કોડ નું એ શેત્ર છે. જેમાં વેરીએબલ ને એક્સેસ કરવામાં આવી શકે છે .
00:58	બીજા શબ્દ માં , આ વેરીએબલસ ની પ્રત્યક્ષતાને દેખાડે છે.
01:03	પ્રથમ આપણે Perl. માં my, local અને our modifiers ના વિષે ચર્ચા કરીશું.
01:10	my એટલેકે Private variables,
01:13	local એટલેકે Dynamically scoped variables,
01:17	our એટલેકે Global variables'.
01:20	વેરીએબલસ જે my કીવર્ડના સાથે ડીકલેર થયા છે બ્લોકના બહાર સ્કોપ સ્કોપ ને ગુમાવી દેશે જેમાં તે ડીકલેર થયા છે.
01:28	તમે આપેલ પ્રકારની વેલ્યુ આપ્યા વગર એક વેરીએબલ ડીકલેર કરી શકો છો. my $fvalue semicolon
01:37	તમે આને એક વેલ્યુ અસાઇન કરીને એક વેરીએબલ પણ ડીકલેર કરી શકો છો.
01:43	my $fValue = 1 semicolon
01:48	my $fname = ડબલ કોટ માં Rahul semicolon
01:55	તેજ my સ્ટેટમેંટ ના અસ્થે અનેક વેરીએબલસ ને ડીકલેર કરવા માટે સિન્ટેક્સ આપેલ આપેલ પ્રકાર છે.
02:02	my ખુલો કૌંસ $fname comma $lname comma $age બંદ કૌંસ
02:12	હવે એક સેમ્પલ પ્રોગ્રામનો ઉપયોગ કરીને private વેરીએબલસ ને સમઝીએ.
02:17	મારી પાસે પહેલાથી એક સેમ્પલ પ્રોગ્રામ છે. હું આને 'gedit Text editor માં ખોલીશ.
02:24	ટર્મિનલ ખોલો અને ટાઈપ કરો : gedit scope hyphen my dot pl ampersand અને Enter દબાવો.
02:34	Scope-my dot pl ફાઈલ હવે જી એડિટમાં ખુલે છે.
02:39	સ્ક્રીન પર પ્રદશિત આપેલની જેમ કોડ ટાઈપ કરો. ચાલો હું કોડ સમજાવું.
02:46	અહી મેં 'my' કીવર્ડ સાથે એક private વેરીએબલ $fname ને ડીકલેર કર્યું છે.
02:52	અને તેને "Raghu" વેલ્યુ અસાઇન કરી છે.
02:56	આ બ્લોકમાં print સ્ટેટમેંટ fname વેરીએબલ જેકે "Raghu" છે તેમાં વેલ્યુ પ્રિન્ટ કરે છે.
03:04	આગલા બ્લોકમાં હું તેજ private' વેરીએબલ $fname. ને '"Other"' વેલ્યુ અસાઇન કરી છે.
03:11	તો, પ્રિન્ટ સ્ટેટમેંટ આ વિશેષ બોલ્કમાં "Other" પ્રિન્ટ કરશે.
03:17	The last print statement in this program will not print any output.
03:23	This is because outside the scope of the blocks defined earlier, fname has no value assigned to it.
03:32	Now, press Ctrl+S to save the file.
03:37	Let us now execute the program.
03:40	Switch back to the terminal and type: perl scope hyphen my dot pl and press Enter.
03:49	The output is displayed as: "Block 1: Raghu" "Block 2: Other" "Outside Block: " there is no output.
03:59	So, the scope of the 'my' variable is accessed only within a particular block of code.
04:06	Now, let us change the existing program a little.
04:10	Let us add my $fname = within double quotes John semicolon outside the blocks, before the last print statement. Save the changes.
04:23	Switch back to the terminal and execute as before.
04:28	Analyze the output that is displayed.
04:32	Hope you are able to understand the scope of using 'my' variable within a block and outside a block.
04:41	Next, we will see about dynamically scoped variable in Perl.
04:47	Local keyword gives a temporary scope to a global variable.
04:52	The variable is visible to any function called from the original block.
04:58	You can declare a local variable as: local $fValue = 100 semicolon local $fname” = within double quotes Rakesh semicolon
05:13	Let us understand this using a sample program.
05:17	Open the terminal and type: gedit scope hyphen local dot pl ampersand and press Enter.
05:27	This will open scope hyphen local dot pl file in gedit.
05:33	Type the following code as displayed on the screen. Let me explain the code now.
05:40	Here, in the first line, we have declared a variable $fname and initialized it.
05:47	Inside the function Welcome(), we have declared a local variable by the same name, $fname.
05:54	Notice the local keyword before the variable name
05:59	and we have assigned the value "Rakesh" to this variable.
06:03	So, basically, inside function Welcome(), $fname is modified as a new temporary local variable. Then, the function Hello() is being called.
06:15	Here is the function definition of Hello().
06:18	At the end of the program, we are calling both the functions Welcome() and Hello().
06:25	Now press Ctrl + S to save the program.
06:29	Let us execute the program.
06:31	Switch back to the terminal and type: perl scope hyphen local.pl and press Enter.
06:41	The output is displayed as: "Hello, Rakesh"! "Hello, Welcome to Spoken tutorials!"
06:48	Let us understand the output.
06:51	When the function Welcome() is called, the function Hello() within it, accesses the local variable.
06:59	Within Welcome(), $fname has the value "Rakesh".
07:04	After this, the function Hello() accesses the variable $fname once again.
07:11	But this time, it is the variable $fname which was initialized to "Welcome to spoken tutorials".
07:19	It does not access the local variable $fname within the function Welcome().
07:25	Which means that, the local variable restores the scope, after leaving the block Welcome().
07:32	Next, we will see about global variables in Perl.
07:38	A global variable can be accessed anywhere in the program.
07:43	Global variables are declared with 'our' keyword.
07:47	Here are some examples. our $fvalue = 100 semicolon </nowiki> our $fname =within double quotes Priya semicolon
08:01	Now, let us look at a working example of global variables.
08:06	Switch back to the terminal and type: gedit scope hyphen our dot pl ampersand and press Enter.
08:16	This will open the file scope hyphen our.pl in gedit.
08:22	Let me explain the sample program which I have written.
08:27	I have declared package main and a global variable as our $i and I have initialized it to 100.
08:37	Notice the package First declaration.
08:40	A package is a collection of code which has its own namespace.
08:46	Namespace prevents variable name collisions between packages.
08:51	We will see more about package and namespace in future tutorials.
08:56	Within package First, the global variable "i" holds the value 10.
09:02	In package Second, the global variable "i" is assigned the value 20.
09:08	The main package uses both package First variable and the package Second variable.
09:15	In my program, I have declared the same variable "i" in all the packages.
09:21	The package variable is referred by package name colon colon variable name.
09:29	In our example, it is $First colon colon i, $Second colon colon i.
09:39	We have multiple packages within one file and the global variable will be accessed by all the packages.
09:47	Now, save the file and execute the program.
09:51	So, switch to terminal and type: perl scope hyphen our dot pl and press Enter.
09:59	The output is as displayed on the terminal.
10:03	Analyze the output by yourself to understand how the assignment to the variable i was done.
10:11	This brings us to the end of this tutorial. Let us summarize.
10:16	In this tutorial, we learnt: scope of variables declaration of private variables dynamically scoped variables and global variables with examples.
10:29	It is preferred to use 'my' than local, as the compilation is faster.
10:35	Here is an assignment for you.
10:37	Write the code for the following assignment and execute it.
10:42	Declare a package as FirstModule.
10:46	Declare a variable $age as our and assign the value 42.
10:52	Declare another package as SecondModule.
10:56	Declare a variable $ageword as our and assign the value within double quotes "Forty-Two".
11:05	Declare a subroutine First().
11:08	Inside the subroutine, declare two variables with local and my keyword as below:
11:16	local $age = 52 semicolon
11:20	my $ageword = within double quotes Fifty-two semicolon
11:27	Call another subroutine as Result().
11:31	Print the values of $age and $ageword inside this function.
11:37	End the subroutine.
11:39	Declare the subroutine Result().
11:42	Again print the values of $age and $ageword.
11:47	End the subroutine.
11:49	Call the function First().
11:51	Print the Package First and Package Second as below:
11:57	The video at the following link summarizes the Spoken Tutorial project. Please download and watch it.
12:05	The Spoken Tutorial project team conducts workshops and gives certificates for those who pass an online test. For more details, please write to us.
12:18	Spoken Tutorial project is funded by NMEICT, MHRD, Government of India. More information on this mission is available at this link.
12:31	This is Nirmala Venkat from IIT Bombay, signing off. Thanks for watching.

Contributors and Content Editors

Jyotisolanki, PoojaMoolya