OpenFOAM/C2/Installing-Running/English-timed

Time	Narration
00:01	Hello and welcome to the spoken tutorial on Installing and running OpenFOAM and paraView.
00:08	In this tutorial I will show you
00:11	how to install and run OpenFOAM Paraview and
00:15	How to solve a lid driven cavity.
00:19	To record this tutorial I am using Linux Operating system Ubuntu version 10.04
00:26	OpenFOAM version 2.1.0 ParaView version 3.12.0
00:33	Note that OpenFOAM does not run on Windows platform.
00:37	Also Note OpenFOAM v 2.1.0 is compatible with linux version 10.04 and above.
00:45	To practice this tutorial you should have some basic knowledge of Computational Fluid Dynamics.
00:52	And Linux Commands.
00:55	Let me introduce you to OpenFOAM
00:57	It is an Open Source Computational Fluid Dynamics Software.
01:02	It contains a wide range of solvers for solving CFD problems of2dimensional
01:08	as well as 3dimensionals.
01:11	Now let me introduce you to Paraview:
01:14	It is used for visualizing the results obtained in OpenFOAM.
01:19	OpenFOAM and paraView can also be installed through Synaptic package manager
01:24	For Synaptic Package Manager go to System > Administration > Synaptic Package Manager
01:33	Type your password.
01:41	In the Search Box type OpenFOAM
01:49	you can see openfoam as well as paraView.
01:54	'Mark both of them for installation
02:06	And then Click Apply to install
02:12	The Installation may take some time.
02:15	OpenFOAM and Paraview are installed.
02:21	For more details on Synaptic Package Manager
02:25	please visit our website on this URL : http://www.spoken-tutorials.org
02:29	Alternately you can also install OpenFOAM and paraView from openfoam website on this url: http://www.openfoam.com/download
02:38	Let me open up the browser
02:45	In the browser URL type : http://www.openfoam.com/downloadPress Enter
03:10	Scroll Down and go to Ubuntu Deb pack Let me zoom this
03:23	Go to Ubuntu deb pack installationClick on it
03:33	Let me zoom out. Scroll down and go to installation
03:40	From the first point of installation
03:43	copy this command line and
03:46	paste it in the terminal window
03:49	To open up a the terminal window
03:52	press Ctrl,Alt and t keys simultaneously on your keyboardor
03:59	go to Application > Accessories > Terminal
04:06	Open up a terminal window
04:10	Now copy this command line and paste it in the terminal window
04:20	Note that in place of 'lsb_release -cs'
04:26	replace it with the name of Linux version that you are using
04:30	Switch back' to the browser.Above installation you can see different ubuntu version and the code names.
04:40	As i am using linux 10.04
04:45	I will replace lbs _ release-cs with lucid
04:53	Open up the terminal window
04:55	I will replace this by lucid.Press enter
05:04	Note that Installation here is incomplete
05:08	if you follow the steps in the
05:10	sequence 1-2-3-4 you will be done through installing open foam and paraview .
05:19	I have already installed OpenFOAM And Paraview through Synaptic Pacakage Manage some while ago
05:27	Now we need to configure the installed software
05:31	To do this we need to edit the bash file
05: 35	Open a new command terminal.
05:39	In the command terminal type : 'gedit ~/.bashrc'. Press Enter
05:50	This opens up the bash file,
05:54	Let me drag this to the capture area scroll down to the bottom of the bash file
06:05	Now switch back to the browser
06:09	Scroll down and go to user configration
06:13	Look at the second point
06:15	Copy this line.And paste it at the botttom of the bash file
06:25	Save it and Close the bash file.
06:31	Now we need to test the installed application
06:35	To do this open up a new command terminal terminal
06:40	Let me drag this to the capture area
06:49	In the command terminal type 'icoFoam (Note that F here is capital) space -(dash) help
06:59	Press enter
07:03	A usage message will appear.
07:06	You are now ready to start with OpenFoam
07:10	Now let me show you how to set up a working directory.
07:14	Create a project or a user directory by the name run
07:21	Open a new command terminal. Let me drag this to the capture area again
07:36	In the Command Terminal type : mkdir (space) -p (space) $FOAM_RUN( Note That FOAM and RUN are in capital) Press Enter
07:55	Copy the tutorial directory from openfoam distribution to run directory
08:01	By typing in the terminal cp (space) -r (space) $FOAM_TUTORIALS (space) $FOAM_RUN
08:18	(' note that FOAM TUTORIAL' And RUN are capital) and Press Enter
08:28	Both the directories are now created.
08:31	To view the directories go to Places > Home Folder > OpenFOAM folder .
08:40	You can see ttt-210, Click on it
08:44	Run and tutorials
08:48	Close this
08:51	let me switch back to the slides.
08:56	If some errors occurs during downloading OpenFOAM and Paraview
09:00	from Synaptic Package Manager or Ubuntu Debian pack from the website
09:05	then you can download and install Openfoam and paraview from the source pack installation
09:11	For source pack installationGo to the Download page of openfoam website
09:18	Now let me zoom this
09:21	Scroll down and go toSource Pack Installation . Now click on this
09:32	Now scroll down and Go to Packs
09:38	Download these 2 tar files and save them. I have already downloaded and saved this 2 tar files
09:48	After this go to your home directory
09:51	To do this go to Places > home folder
09:56	Let me drag this to the capture area
10:00	In your home directory create a folder by a name of your choice
10:09	Let me put this as abc
10:15	Copy the 2 downloaded files in the folder that you have just created.
10:20	To do this , copy these two tar file And paste it into the folder you just created
10:37	Unzip or Untar these two files in the same folder. Extract here, this make take a couple of minutes
10:47	After this open a new command terminal
10:51	In this go to your home folder
10:54	type ls and press enter
11:00	Now go to the same folder in which you have untared the tar files
11:06	Now type cd ( space ) abc and press enter.
11:13	Now To view the contents inside abc type ls and press enter
11:24	Now go back to the Download page of OpenFOAM website for source pack installation
11:32	And Follow the steps given below for ubuntu distribution for OpenFOAM and Paraview
11:39	We need to compile OpenFOAM and Paraview here
11:43	It may take about 4 to 5 hours but this method always works .
11:50	Let us see how to Solve a problem in OpenFOAM with an example
11:56	Let me take a Lid Driven Cavity as an example.
11:59	It is a 2D problem where the upper plate moves with a certain velocity and other three sides of the plate are fixed
12:09	The type of Solver I am using here is for incompressible flow Called as -icofoam
12:17	Now Open a new command terminal again
12:22	i will drag this to the capture area
12:31	Type the path for the lid driven cavity problem
12:35	Note that this problem has already been set up in OpenFOAM
12:41	in the command terminal Type 'run'
12:45	This will direct you to the run directory of OpenFOAM-Press Enter
12:53	Now type cd (space) tutorial (Press Enter)
12:59	cd (space) incompressible (Press Enter)'
13:07	cd (space) icoFoam (Note that F here is capital) (Press Enter)
13:15	cd (space) cavity (Press Enter)
13:20	To view the content inside cavity type ls and press enter
13;27	You can see three files : 0,constant and system
13:33	Now we need to mesh the geometry
13:3	This can be done blockMesh utility of OpenFOAM
13:40	Open the terminal window type blockMesh (Note here that M is capital) Press Enter
13:52	Meshing has been done
13:56	Now run the solver 'icoFoam' by typing in the terminal icoFoam(Note that F here is capital) and Press Enter.
14:09	The iterations running can be seen in the terminal window
14:13	Here we notice we have completed the solving point.
14:16	To visualise these results let us open the paraview window.
14:21	To open paraView, type “paraFoam” in the terminal.(Note that 'F' is capital here) press Enter
14:42	This open ups the paraview window
14:45	Now On the left hand side,
14:48	In the object inspector menu,
14:50	Click Apply to view the geometry
14:54	You can see the Lid Driven Cavity
14:57	Now To see the boundary conditions, scroll down the object inspector menu and go to Mesh Parts
15:08	Uncheck Internel Mesh and click Apply
15:13	The geometry disappear.
15:15	Now to view the moving and fixedwalls
15:19	Check both the boxes and click Apply
15:30	Now uncheck the Moving wall and click Apply
15:35	You can now see three fixedwalls and the moving wall which just disappeared.
15:44	As we are done with running openfoam and paraview
15:49	In future we will come across more tutorials on solving and visualising the OpenFOAM result
15:56	Let me switch back to the slides
16:01	In this tutorial we learnt how to install:
16:05	OpenFOAM and Paraview through Synaptic Package Manager and the website solved a lid driven cavity.
16:12	As as Assignment, install OpenFOAM and Paraview
16:17	Watch the video available at this URL: http://spoken-tutorial.org/What_is_a_Spoken_Tutorial
16:21	It summarizes the Spoken Tutorial project.
16:24	If you do not have good bandwidth, you can download and watch it.
16:29	The Spoken Tutorial Project Team
16:31	-Conducts workshops using spoken tutorials
16:34	-Gives certificates to those who pass an online test
16:38	-For more details, contact st tutemail@gmail.com
16:45	Spoken Tutorials is part of Talk to a Teacher project,
16:49	It is supported by the National Mission on Education through ICT, MHRD, Government of India.
16:56	More information on the same is available at thisURL link http://spoken-tutorial.org/NMEICT-Intro
17:01	This is Rahul Joshi from IIT BOMBAY signing off.Thanks for joining.

Contributors and Content Editors

Gaurav, PoojaMoolya, Pratik kamble, Sandhya.np14, Sneha