Single-Board-Heater-System/C2/Accessing-SBHS-through-Scilab-on-Windows/English

Title of script: Accessing SBHS through Scilab on windows

Author: Rupak Rokade

Keywords: Scilab, SBHS, video tutorial

Visual Cue	Narration
Show Slide	Welcome to this Spoken tutorial on “Accessing SBHS through Scilab on Captial W on the slideWindows”. SBHS stands for Single Board Heater System.
Show Slide	In this spoken tutorial, Add to the slidewe will learn: To set up serial communication between Scilab and SBHS. To perform a Step Test experiment.
Show Slide	Add exactly to the slide...For this tutorial, I am using Windows-7 OS and Scilab 5.3.3
Show Slide	You may download Scilab from: www.scilab.org To install Scilab, watch the Scilab spoken tutorial series on http://spoken-tutorial.org
Show Slide	Before proceeding with this tutorial, you should watch- Introduction to Xcos Connecting SBHS to computer The relevant tutorials for these, are available in this series, on the spoken tutorial website
Show os-hardware.in	To beign, we have to download the Scilab Step Test code. So, let us open a web browser. In the address bar type, os-hardware.in
click on Single Board Heater System link >> Downloads link	Click on the project SBHS and then on the Downloads link.
Select SBHS Local Code >> Save on Desktop	Download the file available under the section SBHS Local Code and save this file on the Desktop.
Switch to Desktop >> Point to the zip file	Notice that the downloaded file will be in zip format.
Right-click >> choose Extract here. Point to scilab codes local	Right-click on the file and choose Extract here. A folder named scilab codes local will be created.
	We are now ready to begin our experiment.
	Make sure the SBHS is connected to your computer and it is powered ON.
Right click on My Computer >> Properties	First, we will check the communication port number assigned to the SBHS. To do this, right click on My Computer and then click on Properties.
Click on Device Manager	A window will open up. In this window, click on Device Manager. Please note that the look and feel of Windows 7 is completely different from other Windows versions. You may also need to vary the steps that I demonstrate here to suit your Windows version.
Point to the list displayed >> point to ports (COM & LPT) option.	The device manager will show you a list of hardware devices on your computer. Locate the ports (COM & LPT) option. Here it is
Double click on the Ports(COM & LPT) option	Now, double-click on this option to open it.
Show the options under Ports(COM & LPT)	If you have connected RS232 cable, then look for communications Port COM1. Else look for USB Serial Port. For RS232 connection, the port number mostly remains COM1. For USB connection, it may change to some other number. Note down the appropriate COM number.
Click on the identified COM port number	In my case it is COMx. Sometimes the COM port number you get after connecting a USB cable is a two-digit number. The serial tool box which connects your board and computer, can handle only single-digit port number. Hence, it is necessary to change your COM port number.
Double-click on the COM port	Let me show you the procedure to change the COM port number. Double-click on that particular COM port.
Click on the Port Settings tab	Click on the Port Settings tab.
Click on Advanced.	Then click on Advanced.
In COM port number dropdown >> choose any single-digit number.	In the COM port number dropdown menu, choose the port number to any other single-digit number. Windows may show you that all ports are currently in use. But, in reality, this is only the old status. Hence, you can forcibly use a particular COM port number, if there is no other USB device connected.
Click on OK	Click on OK to apply these settings.
Click on OK	Click on OK to close the Properties window.
Click on the close option on the Device Manager	Close the Device Manager and the remaining windows.
	Now, let us learn how to configure Scilab, to perform a Step Test using SBHS.
Switch to the Desktop >> Open Step test folder	Open the Scilab local codes folder that we saved on the Desktop. Open the folder Step test.
Double-click ser underscore init.sce	Locate and double-click on the file ser underscore init.sce This will launch Scilab automatically and will also open the file in Scilab editor.
Click on File >> Open a file >> Choose ser underscore init.sce >> click on Open.	If it doesn't open the file, click on File menu then on Open a file. Choose the file ser underscore init.sce and click on Open.
Switch to scilab >> Type getd space ../common_files/ Type exec space ../common_files/loader.sce	Switch to the scilab workspace and execute the following commands. Type getd space ../common_files/ and press Enter. Then type exec space ../common_files/loader.sce and press Enter.
Point to message	You can see that it gives a message that it has loaded the serial port toolbox.
Switch to scilab >> locate variable port2	Switch to the scilab editor. In the ser underscore init.sce file, locate the line which asks for value of variable port2. Value of port2 variable needs to be replaced with the identified COM port number.
Change the port number	Change the port number to the one you identified a few minutes back.
Point accordingly	Make sure its in single quotes
Save the file	Do not make any other changes to the content of the file. Now, save the file.
Click on Execute	On the menu bar, click on the Execute button to execute this file.
Point to the message	On the Scilab workspace you will get a message COM Port Opened However, it is also possible that you get an error message Let me explain using slides, how do you handle a typical error Let me switch to slides
Show Slide	In case a TCL/TK related error is displayed, reconnect the USB cable connected to the SBHS and execute this file again. Check once if the COM port number has changed. If it still doesen't work, restart Scilab and repeat the process
In Scilab >> Type exec space step_test.sci >> Type xcos space step_test.xcos	In the Scilab workspace, execute the following commands - Type exec space step_test.sci and press Enter. The type xcos space step_test.xcos and press Enter.
	This will launch the xcos interface made for step test experiment.
Double click on the Heater Input block	You can change the block parameters by double-clicking on the blocks. It is recommended that you keep the parameters unchanged for the first time.
click on the simulation tab	In the menubar of the Xcos window, click on the Simulation tab.
Click on the Start option	Now select the Start option
Point at the first plot	After we have executed the Xcos file successfully, a plot window with three graphs will be displayed. The first graph is of Heater in percentage.
Point at the second plot	The second graph is of Fan in percentage
Point at the third plot	The third graph is of Temperature in degree Celsius
Show Slide	There are some things to be noted Let me switch to the slides. The Fan, Heater and Temperature are displayed on the SBHS display as shown in the image.
Show Slide	Please note that the values shown in the graph should be the same as displayed on the SBHS display. If this is not the case, then it means that Scilab is not communicating with SBHS.
Show Slide	You can also check if the communication LEDs are flashing periodically. You will find these LEDs next to the USB connector on the SBHS as shown in this image
	This is a real experiment and will take some time to produce results. I will now pause the recording for sometime.
Point at the plots	After running the experiment for sufficient time, the final graphs will be as shown here. We can see that the temperature has responded to the step change in the heat value.
	<PAUSE>
Switch to the step test folder.	Most of the process that we went through, can be completed by just executing one file. Let me show you this file. Switch to the step test folder. The steps after launching of scilab till opening xcos can be executed using start.sce file.
Show slides	Let me switch to slides Usage of start.sce file is recommended only after you get a firm understanding of the process. This file assumes that the port number provided in ser underscore init.sce file is correct.
Click on the Stop option	To stop the experiment, click on Stop option available in the menu bar of the Xcos window. After completing the experiment, let us reset the SBHS. Let me switch to the slides again to illustrate this.
Show the Slide	A reset push button is provided on the SBHS, as shown in the picture. To reset, press the Reset button for 1 or 2 seconds and then release it. The reset operation makes Heat 0% and Fan 100%. However 0 is displayed for both on the LCD.
Go to the Step test folder and point to the file	The data file for this experiment is saved in Step test folder. The name of the data file is in the format of a time stamp. Read the data file name as Year Month Date Hours Minutes Seconds.Txt
Click and open the file.	Let me open and show you the content of the data file It has values of heat fan and temperature for every sample. Hence, this file can be used for analysis purpose.
Show slide	Let us summarise. In this tutorial, we learnt to- Set up serial communication between the Scilab and SBHS Perform Step Test experiment
Show slide	The video available at the following link summarises the Spoken Tutorial project. Please download and watch it.
Show slide	The Spoken Tutorial Project Team conducts workshops and gives certificates to those who pass online tests. For more details, write to us.
Show slide	Spoken Tutorial Project is funded by NMEICT, MHRD, Government of India. More information on this Mission is available at the link shown here. Thanks for joining; this is Rupak Rokade from IIT Bombay signing off.

Contributors and Content Editors

Nancyvarkey, Rupakrokade