OpenFOAM/C3/Importing-mesh-file-in-OpenFOAM/English
From Script | Spoken-Tutorial
Revision as of 14:52, 22 December 2014 by Rahuljoshi (Talk | contribs)
| Visual Cue | Narration | ||
| Slide 1 | Hello and welcome to the spoken tutorial on Importing Mesh files in OpenFOAM | ||
| Slide 2 : Learning Objectives | In this tutorial, you will learn how to:
| ||
| Slide 3 : Pre-requisite | As a pre-requisite, the user should know how to generate a Mesh in software
like -Gambit, Ansys ICEM , CFX, Salome etc.
| ||
| Slide 4: System Requirement | To record this tutorial I am using
| ||
| Slide 5:. | Using blockMesh, we can easily make simple geometries.
For example- pipe, box, etc. | ||
| Narration, no visual cue | It is difficult to create complex geometries using blockMesh.
But OpenFOAM supports importing mesh from third party meshing software. | ||
| There are commands available in OpenFOAM, to import these mesh files.
We will now learn how to import these files | |||
| Slide 7 : geometry for the case | Point over the square cylinder | point over its length and height | point on inlet velocity |
| Here is the geometry of our case.
|
