GChemPaint/C2/Introduction-to-GChemPaint/Gujarati

From Script | Spoken-Tutorial
Revision as of 16:49, 14 August 2014 by Jyotisolanki (Talk | contribs)

Jump to: navigation, search

Title of the tutorial: Introduction-to-GChemPaint

Author: Madhuri Ganapathi

Key words: About GChemPaint, Installation, Open a new file, Menubar, Toolbar and Status bar, Display area, Document properties, tool box, Add a chain tool and video tutorial.


Time Narration

Title of the tutorial: Introduction-to-GChemPaint

Author: Madhuri Ganapathi

Key words: About GChemPaint, Installation, Open a new file, Menubar, Toolbar and Status bar, Display area, Document properties, tool box, Add a chain tool and video tutorial.


Time Narration


00:01 Hello everyone
00:02 Introduction to GChemPaint પરનાં આ ટ્યુટોરીયલમાં સ્વાગત છે.
00:07 આ ટ્યુટોરીયલમાં, આપણે આપેલ વિશે શીખીશું,
00:11 GChemPaint વિષે
00:13 ઉપયોગો અને લાભો
00:16 સંસ્થાપન
00:17 નવી ફાઈલ ખોલવી
00:20 Menubar, Toolbar અને Status bar
00:25 આપને આ પણ શીખીશું,


00:28 Display area
00:30 Document properties
00:32 tool box ને વાપરવું અને
00:34 ચિત્રને .gchempaint એક્સ્ટેંશન સાથે સંગ્રહિત કરતા.
00:40 અહી હું વાપરી રહ્યી છું,
00:42 Ubuntu Linux OS આવૃત્તિ . 12.04
00:47 GChemPaint આવૃત્તિ 0.12.10
00:53 આ ટ્યુટોરીયલનાં અનુસરણ માટે, તમે આપેલ સાથે પરિચિત હોવા જોઈએ
00:59 આઠમાં ધોરણ સુધીનું રસાયણશાસ્ત્ર
01:04 Ubuntu Software Center. વાપરીને GChemPaintનું સંસ્થાપન કરવું ખુબ સરળ છે.
01:12 Ubuntu software Center, માટે વધું જાણકારી માટે
01:16 અમારી વેબ સાઈટ પર Ubuntu Linux Tutorials નો સંદર્ભ લો.
01:23 GChemPaint શું છે?
01:26 GChemPaint એ બે પરિમાણીય chemical structure editor છે.
01:32 તે બહુવિધ ડોક્યુમેન્ટ ઇન્ટરફેસ ધરાવે છે.
01:37 GChemPaint તમને પરવાનગી આપે છે,
01:40 બે પરિમાણીય કેમિકલ સ્ટ્રક્ચરને દોરવાની અને પ્રદશિત કરવાની.
01:46 ટેમ્પલેટ્સ ને ડ્રેગ અને ડ્રોપ કરવાની.
01:50 બોન્દ્સ્બો બોન્ડની લંબાઈ, કોણ અને પહોળાઈ બદલવાની.
01:55 સંયોજનો ના પરમાણુનો વજનની ગણતરી કરવા માટે Chemical Calculator નો ઉપયોગ કરો.
02:03 GChemPaint મદદ કરેછે
02:05 કેમિકલ સ્ટ્રક્ચરને સરળતા થી જોવા માટે.
02:11 બે પરિમાણીય સ્ટ્રક્ચર થી ત્રણ પરિમાણીય સ્ટ્રક્ચર માં બદલતા.
02:17 સ્ટ્રક્ચરનું વિસ્તૃતીકરણ
02:21 પરમાણુનું Automatic અને manualઅસાઇનમેન્ટ.
02:26 ચાલો પહેલા જોઈએ GChemPaint એપ્લીકેશન કેવી રીતે ખોલવું.
02:33 Dash home પર ક્લિક કરો >> Search bar દેખ્યા છે >> Search bar માં ટાઈપ કરો GChemPaint
02:41 GChemPaint આઇકોન પર ક્લિક કરો.
02:46 આપણે GChemPaint' એપ્લીકેશન ને ટર્મિનલથી પણ ખોલી શકીએ છીએ.
02:52 ટર્મિનલ ખોલવા માટે CTRL, ATL અને T કીઓ એક સાથે દબાઓ.
02:58 GChemPaint ટાઈપ કરો અને Enter. દબાઓ.
03:04 GChemPaintખુલે છે.
03:08 સામાન્ય GChemPaint વિન્ડો આવી દેખાય છે.
03:13 આ મેનૂ બાર છે.
03:15 GChempaint એ બીજા વિન્ડો આધારિત એપ્લીકેશન ની જેમ જ પ્રમાણભૂત મેનુ બાર ધરાવે છે.
03:22 Menu bar આપેલ વિકલ્પ ધરાવે છે. File, Edit, View, Tools, Windows અને Help
03:34 Toolbar વારંવાર ઉપયોગમાં આવતા કમાંડસ આઇકોન ના રૂપમાં ધરાવે છે.
03:41 અહી આઇકોન છે open a New file,
03:45 Open existing file,
03:48 Save a file અને Print a file.
03:53 આ ડીસ્લ્પે એરિયા છે.
03:56 Display area જે ફાઈલ આપણે દોરે છે અને ફેરફાર કરીએ છીએ તેના બંધારણો અને વિષયવસ્તુ બતાવે છે.
04:06 આપણે ટૂલ બોક્ક્ષમાંથી ટૂલસને ડિસ્પ્લે એરિયા પર ડ્રેગ અને ડ્રોપ કરી શકીએ છીએ.
04:14 Statusbar ' એ 'GChemPaint' ની વર્તમાન પ્રવૃત્તિ વિશે માહિતી પ્રદર્શિત કરે છે.
04:20 તે મેનુ આઈટમ વિષે 'સંદર્ભિત જાણકારી પણ દર્શાવે છે.
04:28 હવે હું Document Properties. વિષે સમજાવીશ.
04:33 Document Properties વિન્ડો ખોલવા માટે ,
04:37 File મેનુ પર ક્લિક કરો.
04:39 Properties પર જાઓ અને તેના પર ક્લિક કરો .
04:43 Document Properties વિન્ડો ખુલે છે.
04:47 હું ડોક્યુમેન્ટ પ્રોપર્ટી વિન્ડો ને મોટું કરવા અંતે તેને ડ્રેગ કરીશ.
04:53 Document properties વિન્ડો પાસે આપેલ વિકલ્પ છે.
04:59 Title- Let's type the title of the document as “Propane” ચાલો ડોક્યુમેન્ટ નું taaitl
05:06 Author's Name- let's type author's name as Madhuri.
05:14 Email– Let's leave it blank.
05:17 History – This field shows the Creation date of the document.
05:23 It also shows the Revision date of the document.
05:28 This means, it also shows the next edited date of the document.
05:35 Theme- let's leave this field as GChemPaint
05:39 Comments- In the Comments field, we can add text related to the document.
05:46 Let's enter name of the compound and its formula.
05:51 Propane CH3-CH2-CH3
06:01 Let's click on Close button to close the window.
06:05 Next let's learn about Toolbox.
06:09 Toolbox contains buttons for different tools.
06:14 Toolbox is displayed along with the active document window.
06:20 Let's now draw structures using Toolbox buttons.
06:25 Let's first draw the structure of propane.
06:30 Propane is CH3-CH2-CH3
06:36 Let's use Add a Chain tool from Tool box to draw a Carbon chain.
06:42 Click on Add a Chain tool,
06:45 and then click on Display area.
06:48 A Carbon chain is drawn on the Display area.
06:53 To change the orientation of the chain,
06:57 click on Add a Chain tool.
07:00 In the Display area, click and hold the left mouse button to orient the chain.
07:07 Do not release the left mouse button until the direction of the chain is fixed.
07:15 Release the left mouse button after fixing the direction.
07:20 We see that carbon chain is drawn.
07:24 Note once we click on the Display area, the chain length and orientation of the chain are fixed.
07:33 Let's now display atoms at each position on the chain.
07:39 Here we have 3 positions to display atoms.
07:43 Right click on the first position,
07:47 a Submenu opens.
07:49 Select Atom and then click on Display symbol, to display atoms at that position.
07:59 Like wise, let's display atoms on all positions.
08:04 Right click Select Atom
08:07 click on Display symbol
08:12 Here the structure of “Propane” is drawn
08:17 Let's next draw a pentane structure on the same window.
08:23 Click on Add a Chain tool,
08:26 then click on Display area.
08:29 To increase the chain length, hold the left mouse button and drag the cursor.
08:36 Change orientation in the desired direction and release the left mouse button.
08:43 Let's display atoms on all positions.
08:47 Here we have 5 positions to display atoms.
08:52 To display atoms on the first position, right click. A submenu opens
08:58 Select Atoms and then click on Display symbol
09:03 Like wise let's display atoms on all positions.
09:17 Here the structure of pentane is drawn.
09:21 Let's now save the file.
09:24 click on File Menu select Save as .
09:27 Save As dialog box opens.
09:30 For File type, click on the drop down arrow.
09:35 Various save formats are seen.
09:39 Select 2D Chemical structure
09:43 Type the file name as propane.gchempaint,
09:52 and click on Save button.
09:55 File is saved with .gchempaint extension.
10:00 With this, we come to the end of this tutorial.
10:04 Let's summarise.
10:06 In this tutorial we have learnt,
10:09 About GChemPaint
10:10 Uses and Benefits
10:12 Installation
10:14 Open a new file
10:16 Menubar, Toolbar and Status bar
10:20 We have also learnt about
10:23 Display area
10:25 Document Properties
10:26 Using tool box and
10:28 Save the drawing with extension .gchempaint
10:33 As an assignment I would like you to
10:36 1. Draw structures of n-hexane and n-octane
10:41 2. Change the orientation
10:43 3. Display atoms on each position
10:47 Output of the assignment should look like this.
10:53 Watch the video available at this URL
10:57 It summarises the Spoken Tutorial project
11:00 If you do not have good bandwidth, you can download and watch it
11:05 The Spoken Tutorial Project Team:
11:07 Conducts workshops using spoken tutorials
11:10 Gives certificates to those who pass an online test
11:14 For more details, please write to

contact@spoken-tutorial.org

11:21 Spoken Tutorial Project is a part of the Talk to a Teacher project
11:26 It is supported by the National Mission on Education through ICT, MHRD, Government of India
11:34 More information on this Mission is available at this link.
11:40 This is Madhuri Ganpathi from IIT Bombay signing off. Thank you for joining.


00:01 Hello everyone
00:02 Welcome to the tutorial on, Introduction to GChemPaint
00:07 In this tutorial, we will learn
00:11 About GChemPaint
00:13 Uses and Benefits
00:16 Installation
00:17 Open a new file
00:20 Menubar, Toolbar and Status bar
00:25 We will also learn about,


00:28 Display area
00:30 Document properties
00:32 Using tool box and
00:34 Saving the drawing with extension .gchempaint
00:40 Here I am using
00:42 Ubuntu Linux OS version. 12.04
00:47 GChemPaint version 0.12.10
00:53 To follow this tutorial you should have knowledge of,
00:59 Basics of Chemistry upto VIII standard.
01:04 GChemPaint can be very easily installed using Ubuntu Software Center.
01:12 For more information on Ubuntu software Center,
01:16 please refer to Ubuntu Linux Tutorials on our website
01:23 What is GChemPaint?
01:26 GChemPaint is a two dimensional chemical structure editor.
01:32 It has a multiple document interface.
01:37 GChemPaint allows you to,
01:40 Draw and display two dimensional chemical structures.
01:46 Drag and drop of templates
01:50 Change length, angle and width of the bonds
01:55 Use Chemical Calculator to calculate molecular weight of compounds
02:03 GChemPaint helps in
02:05 Easy visualization of chemical structures
02:11 Converting two dimensional structures to three dimensional structures.
02:17 Magnification of structures
02:21 Automatic and manual assignment of atoms
02:26 Let's first see how to open a new GChemPaint application.
02:33 Click on Dash home >> Search bar appears>>In the Search bar type GChemPaint
02:41 Click on the GChemPaint icon.
02:46 We can also open GChemPaint application from Terminal.
02:52 Press CTRL, ATL and T keys simultaneously to open the Terminal.
02:58 Type GChemPaint and press Enter.
03:04 GChemPaint application opens.
03:08 A typical GChemPaint window looks like this.
03:13 This is the Menubar.
03:15 GChempaint has a standard menu-bar like other window based applications.
03:22 Menu bar contain menu items like File, Edit, View, Tools, Windows and Help options
03:34 Toolbar contains most frequently used commands as icons.
03:41 There are icons to open a New file,
03:45 Open existing file,
03:48 Save a file and Print a file.
03:53 This is the Display area.
03:56 Display area shows the structures and the contents of the file that we draw and edit.
04:06 We can drag and drop tools from toolbox into the Display area.
04:14 Statusbar displays information about current GChemPaint activity.
04:20 It also displays contextual information about menu items.
04:28 Now I will explain about Document Properties.
04:33 To open Document Properties window,
04:37 click on File menu.
04:39 Navigate to Properties and click on it.
04:43 Document Properties window opens.
04:47 I will drag the Document Properties window to maximize it.
04:53 Document properties window has the following fields.
04:59 Title- Let's type the title of the document as “Propane”
05:06 Author's Name- let's type author's name as Madhuri.
05:14 Email– Let's leave it blank.
05:17 History – This field shows the Creation date of the document.
05:23 It also shows the Revision date of the document.
05:28 This means, it also shows the next edited date of the document.
05:35 Theme- let's leave this field as GChemPaint
05:39 Comments- In the Comments field, we can add text related to the document.
05:46 Let's enter name of the compound and its formula.
05:51 Propane CH3-CH2-CH3
06:01 Let's click on Close button to close the window.
06:05 Next let's learn about Toolbox.
06:09 Toolbox contains buttons for different tools.
06:14 Toolbox is displayed along with the active document window.
06:20 Let's now draw structures using Toolbox buttons.
06:25 Let's first draw the structure of propane.
06:30 Propane is CH3-CH2-CH3
06:36 Let's use Add a Chain tool from Tool box to draw a Carbon chain.
06:42 Click on Add a Chain tool,
06:45 and then click on Display area.
06:48 A Carbon chain is drawn on the Display area.
06:53 To change the orientation of the chain,
06:57 click on Add a Chain tool.
07:00 In the Display area, click and hold the left mouse button to orient the chain.
07:07 Do not release the left mouse button until the direction of the chain is fixed.
07:15 Release the left mouse button after fixing the direction.
07:20 We see that carbon chain is drawn.
07:24 Note once we click on the Display area, the chain length and orientation of the chain are fixed.
07:33 Let's now display atoms at each position on the chain.
07:39 Here we have 3 positions to display atoms.
07:43 Right click on the first position,
07:47 a Submenu opens.
07:49 Select Atom and then click on Display symbol, to display atoms at that position.
07:59 Like wise, let's display atoms on all positions.
08:04 Right click Select Atom
08:07 click on Display symbol
08:12 Here the structure of “Propane” is drawn
08:17 Let's next draw a pentane structure on the same window.
08:23 Click on Add a Chain tool,
08:26 then click on Display area.
08:29 To increase the chain length, hold the left mouse button and drag the cursor.
08:36 Change orientation in the desired direction and release the left mouse button.
08:43 Let's display atoms on all positions.
08:47 Here we have 5 positions to display atoms.
08:52 To display atoms on the first position, right click. A submenu opens
08:58 Select Atoms and then click on Display symbol
09:03 Like wise let's display atoms on all positions.
09:17 Here the structure of pentane is drawn.
09:21 Let's now save the file.
09:24 click on File Menu select Save as .
09:27 Save As dialog box opens.
09:30 For File type, click on the drop down arrow.
09:35 Various save formats are seen.
09:39 Select 2D Chemical structure
09:43 Type the file name as propane.gchempaint,
09:52 and click on Save button.
09:55 File is saved with .gchempaint extension.
10:00 With this, we come to the end of this tutorial.
10:04 Let's summarise.
10:06 In this tutorial we have learnt,
10:09 About GChemPaint
10:10 Uses and Benefits
10:12 Installation
10:14 Open a new file
10:16 Menubar, Toolbar and Status bar
10:20 We have also learnt about
10:23 Display area
10:25 Document Properties
10:26 Using tool box and
10:28 Save the drawing with extension .gchempaint
10:33 As an assignment I would like you to
10:36 1. Draw structures of n-hexane and n-octane
10:41 2. Change the orientation
10:43 3. Display atoms on each position
10:47 Output of the assignment should look like this.
10:53 Watch the video available at this URL
10:57 It summarises the Spoken Tutorial project
11:00 If you do not have good bandwidth, you can download and watch it
11:05 The Spoken Tutorial Project Team:
11:07 Conducts workshops using spoken tutorials
11:10 Gives certificates to those who pass an online test
11:14 For more details, please write to

contact@spoken-tutorial.org

11:21 Spoken Tutorial Project is a part of the Talk to a Teacher project
11:26 It is supported by the National Mission on Education through ICT, MHRD, Government of India
11:34 More information on this Mission is available at this link.
11:40 This is Madhuri Ganpathi from IIT Bombay signing off. Thank you for joining.

Contributors and Content Editors

Jyotisolanki, PoojaMoolya

Retrieved from "https://script.spoken-tutorial.org/index.php?title=GChemPaint/C2/Introduction-to-GChemPaint/Gujarati&oldid=15800"