Ruby/C2/Control-Statements/Gujarati

Time	Narration
00:01	Welcome to the spoken tutorial on in Ruby. મા Control Statements પર ના સ્પોકન ટ્યુટોરીયલમા તમારુ સ્વાગત છે.
00:06	આ ટ્યુટોરીયલમા આપણે શીખીશું
00:08	if statement (ઇફ સ્ટેટમેંટ)
00:09	elsif statement (ઇફએલ્સ સ્ટેટમેંટ)
00:11	else (એલ્સ)
00:12	case statements (કેસ સ્ટેટમેંટ)
00:14	અહીં આપણે વાપરી રહ્યા છે
00:15	Ubuntu આવૃત્તિ 12.04
00:18	Ruby 1.9.3
00:21	આ ટ્યુટોરીયલ અનુસરવા માટે, તમે 'ઈન્ટરનેટ સાથે જોડાયેલા હોવા ખુબ જરૂરી છે.
00:24	તમને Linux ના commands, Terminal અને Text-editor. નું પણ જ્ઞાન હોવું જરૂરી છે.
00:30	જો નથી, તો સંબંધિત ટ્યુટોરિયલ્સ માટે, અમારી વેબસાઇટ જુઓ.
00:34	શરત કરવા પહેલા યાદ કરો કે આપણે “ttt” નામની ડિરેક્ટરી પહેલા બનાવી હતી.
00:38	Let's go to that directory. ચાલો તે ડિરેક્ટરી પર જઈએ.
00:41	પછી ruby hyphen tutorial control hyphen statements
00:47	હમણા તે ફોલ્ડર મા છીએ ચાલો આગળ વધીએ.
00:52	Ruby મા if statement માટે સિન્ટેક્સ નીચે પ્રમાણે છે:
00:56	if “condition” (ઇફ કન્ડીશન)
00:58	ruby code (રૂબી કોડ)
00:59	end (એન્ડ)
01:01	ચાલો ઉદાહરણ જોઈએ.
01:03	gedit' મા નવી ફાઈલ બનાવવી જે બસિક લેવલ ના 'Ruby tutorials મા બતાવ્યું.
01:08	if hyphen statement dot rb તેને નામ આપો
01:12	મારી પાસે if statement. ના ઉદાહરણ છે.
01:15	ટ્યુટોરીયલ અટકાવી તમે આ કોડ ટાઈપ કરી તેને ફરતે જી શકો છો.
01:19	આ ઉદાહરણ મા હું if statement ને ડીકલેર કરીશ.
01:23	પહેલા હું લોકલ વેરીએબલ my_num ડીકલેર કરીશ અને તેને વેલ્યુ 2345 આપીશ.
01:31	પછી હું if statement. ડીકલેર કરીશ.
01:34	if statement મા puts મેથડ ડીકલેર કરી છે જે આઉટપુટ આપશે.
01:39	if statement એ my_num ની વેલ્યુ 0 કરતા વધારે છે તે તપાસશે.
01:43	જો તે હશે તો નિર્દેશ કરાયેલ string. આઉટપુટ પ્રિન્ટ કરશે.
01:47	હવે ચાલો terminal પર પાછા જઈએ અને ટાઈપ કરો.
01:51	ruby space if hyphen statement dot rb
01:57	આઉટપુટ આ રીતે પ્રદશિત થાય છે “The value of my_num is greater than 0”.
02:02	આ આઉટપુટ if કન્ડીશન true. છે તે સાબિત કરે છે.
02:07	Ruby. મા હવે તમે પોતાના if statement લખવા માટે શમર્થ હોવા જોઈએ.
02:12	હવે આગળ if-else statement જોઈએ.
02:16	else માટે સિન્ટેક્સ વાપરીશું:
02:18	if “condition” (ઇફ કન્ડીશન)
02:19	ruby code (રૂબી કોડ)
02:20	else (એલ્સ)
02:21	ruby code (રૂબી કોડ)
02:22	end (એન્ડ)
02:24	Let us look at an example. ચાલો ઉદાહરણ જોઈએ.
02:26	Rubyના બેસિક લેવલના ટ્યુટોરીયલોમા બતાવ્યા પ્રમાણે gedit મા નવી ફાઈલ બનાઓ.
02:30	તેને if hyphen else hyphen statement dot rb નામ આપો.
02:37	મારી પાસે if-else statement. ના ઉદાહરણ છે.
02:40	You can pause the tutorial, and type the code as we go through it.
02:44	I have declared an if-else statement in this example.
02:48	First I declare a local variable my_num and assign the value of -1 to it.
02:55	Then I declare an if statement.
02:58	The if statement will check if the value of my_num is greater than 0.
03:03	If it is, it will print out the specified string.
03:06	If not, it will go to the else statement.
03:10	And it will print out the string that is specified there.
03:13	Now, let us switch to the terminal and type
03:18	ruby space if hyphen else hyphen statement dot rb
03:26	and see the output.
03:27	The output will display “The value of my_num is lesser than 0”.
03:32	This shows that the else statement was executed.
03:35	You should now be able to write your own if-else statement in Ruby.
03:41	Let's look at the if-elsif statement next.
03:45	The syntax for using elsif is:
03:48	if “condition” ruby code
03:50	elsif “condition” ruby code
03:52	else ruby code
03:54	end
03:55	Let us look at an example.
03:58	Create a new file in gedit as shown in the basic level Ruby tutorials.
04:01	Name it if hyphen elsif hyphen statement dot rb
04:07	I have a working example of the if-elsif- statement.
04:10	You can pause the tutorial, and type the code as we go through it.
04:14	I have declared an if-elsif statement in this example.
04:19	Here also, I have declare a local variable my_num and assign the value -1 to it.
04:25	Then I declare an if statement.
04:28	The if statement will check if the value of my_num is greater than 0.
04:32	If it is, it will print out the specified string.
04:35	If this is not true , it will go into the elsif section.
04:39	It will now check if the value of my_num is equal to -1.
04:43	If it is true, it will print out the string that is specified there.
04:46	The value of my_num is neither greater than 0 nor equal to -1 it will go into the else section.
04:54	But since the value of my_num = -1 it will not proceed to the else block.
05:00	And it will exit the conditional statement.
05:03	Now, let us switch to the terminal and type
05:07	ruby space if hyphen elsif hyphen statement dot rb
05:15	and see the output.
05:17	The output will display “The value of my_num is -1 and is lesser than 0”.
05:23	Let's go back to our file and change the value of my_num to 5.
05:29	Let's save the code and execute it on the terminal.
05:35	So, now it fulfills the if condition and the specified string is printed.
05:42	The value of my_num is greater than 0
05:45	Let's go back to our file and change the value of my_num to -5
05:50	Lets save the code and execute it on the terminal
05:55	In this case it fulfills the else condition and the puts statement within the else block gets executed.
06:03	You should now be able to write your own if- elsif statement in Ruby.
06:08	Let us look at the case statement next.
06:12	The case statement is a control flow statement based on a particular selection.
06:17	Let us look at the syntax of the case statement in order to understand this statement.
06:22	The syntax for using case is:
06:24	case variable
06:26	when “value 1”
06:28	ruby code
06:29	when “value 2”
06:30	ruby code
06:31	else
06:32	ruby code
06:34	end
06:35	Let us look at an example.
06:37	Create a new file in gedit as shown in the basic level Ruby tutorials.
06:41	Name it case hyphen statement dot rb
06:44	I have a working example of the case statement.
06:48	You can pause the tutorial, and type the code as we go through it.
06:52	I have declared an case statement in this example.
06:55	Here I have a print statement, which will print a question on the terminal.
07:01	Then I call a gets, which will accept a single line of data from the standard input.
07:09	Then I strip the input data of any new line characters using chomp.
07:15	I assign the result to a variable named domain.
07:18	Then I declare a case statement.
07:22	Within that I declare a when statement .
07:25	This checks whether the specified string matches value of domain.
07:30	First it checks whether the value of domain is “UP”.
07:34	If it is so, it will print out “Uttar Pradesh” and exit the case statement.
07:39	If domain is not “UP”, it checks whether the value of domain is “MP”.
07:44	If it is so, it will print out “Madhya Pradesh” and so on.
07:48	It will continue checking the value of domain if no match was found so far.
07:53	At this point it will encounter the else statement
07:56	as none of the above conditions were true.
07:59	It will subsequently execute the ruby code that follows the else declaration.
08:03	It will print “Unknown” as per our example.
08:07	Now, save the file, switch to the terminal and type
08:11	ruby space case hyphen statement dot rb.
08:18	“Enter the state you live in:” will be displayed on the terminal.
08:22	Type in “UP” and see the output.
08:25	The output will display “Uttar Pradesh”.
08:28	Next execute the Ruby file again, like before.
08:31	This time at the prompt type “KL” and see the output.
08:36	It will print “Kerala”.
08:38	Next execute the file one more time.
08:41	This time at the prompt type in “TN” and see the output.
08:47	It will print “Unknown”.
08:50	This is because none of the cases were satisfied. So, the default else statement is executed.
08:58	You should now be able to write your own case-statements in Ruby.
09:03	This brings us to the end of this Spoken Tutorial.
09:07	Let's summarize.
09:08	In this tutorial we have learnt to use
09:10	if statement
09:12	else construct
09:13	if-elsif and
09:15	case statements
09:17	As an assignment :
09:18	Write a Ruby program :
09:20	that prompts a user to enter a number
09:23	then use the appropriate control-statement
09:26	to check if the number is a multiple of 2
09:29	if it is, then print “The number entered is a multiple of 2”
09:35	if not, it should check if it is a multiple of 3
09:38	if it is, then print “The number entered is a multiple of 3”
09:43	if not, it should check if it a multiple of 4
09:47	if it is, then print “The number entered is a multiple of 4”
09:51	if not, it should print “The number is not a multple of 2, 3 or 4”
09:56	Watch the video available at the following link.
10:00	It summarises the Spoken Tutorial project.
10:03	If you do not have good bandwidth, you can download and watch it.
10:07	The Spoken Tutorial Project Team :
10:09	Conducts workshops using spoken tutorials
10:13	Gives certificates to those who pass an online test
10:16	For more details, please write to contact@spoken-tutorial.org
10:21	Spoken Tutorial Project is a part of the Talk to a Teacher project.
10:26	It is supported by the National Mission on Education through ICT, MHRD, Government of India.
10:32	More information on this Mission is available at spoken hyphen tutorial dot org slash NMEICT hyphen Intro
10:41	This is Anjani Nair signing off. Thanks for watching.

Contributors and Content Editors

Jyotisolanki, PoojaMoolya