Blender/C2/Camera-View-Settings/English-timed

Time	Narration
00:07	Welcome to the series of Blender tutorials.
00:11	This tutorial is about Navigation – Camera view.
00:16	We shall learn how to navigate the camera in Blender 2.59.
00:21	This script has been contributed by Chirag Raman and edited by Monisha Banerjee.
00:30	After watching this tutorial,
00:32	we shall learn how to change the location of the camera to get a new camera view;
00:38	how to roll, pan, dolly and track the camera view;
00:43	and how to select a new camera view using the fly mode.
00:50	I assume that you already know how to install Blender on your system.
00:54	If not please refer to our earlier tutorials on Installing Blender.
01:02	By default, when Blender opens, the 3D view is in the User Perspective view.
01:11	Now, lets switch to the camera view.
01:15	Go to view tab in the bottom left corner of the 3D panel.
01:21	Left click camera from the menu.
01:25	For keyboard shortcut, press numpad 0.
01:29	If you are using a laptop, you need to emulate your number keys as numpad.
01:36	To learn how to emulate numpad, see the tutorial on User Preferences.
01:45	This is the Camera View.
01:49	The dotted box is the field of view of the active camera.
01:55	All objects inside this dotted box will be rendered.
02:01	Render settings shall be covered in a later tutorial.
02:05	Blender allows you to position and orient the active camera to match your current view point.
02:11	Lets see how to do this.
02:15	Press Numpad zero to go back to the perspective view.
02:20	You see, the shortcut numpad zero is a toggle to switch-to and from the camera view.
02:26	Hold the mouse wheel or the MMB and move the mouse to rotate the view to a location where you wish to place your camera.
02:36	I have selected this location.
02:40	Press Control, Alt & Num Pad zero.
02:46	The camera moves to the new location.
02:49	The 3D view switches to the camera view at the same time.
02:54	Blender also allows you to perform a few navigational actions on the camera, such as rolling, panning, tracking etc.
03:03	We shall now look at these.
03:05	Right clicking on the dotted box to select the camera.
03:10	From here on, you can manipulate the camera like you would manipulate any other object.
03:17	Do remember that to perform these actions you need to be in camera view.
03:22	The first action we shall see is to roll the camera view.
03:26	Press R on your keyboard to enter the object rotation mode.
03:32	Now move your mouse left to right and up and down.
03:42	By default this rotates the camera in its local z-axis, i.e. around the axis that goes into or comes out of the camera view.
03:53	Right click on screen or Press Esc on the keyboard to cancel the action.
03:58	This will take you back to your previous camera view.
04:04	Now, the next action we shall see is panning the camera view.
04:09	Panning is in 2 directions – left to right or up and down.
04:15	Press R to enter the object rotation mode. Press X twice.
04:22	The first X locks the rotation to the global X axis.
04:26	The second X locks the rotation to the local X axis.
04:31	We will discuss about global and local transform axis in detail in subsequent tutorials.</p>
04:38	Now move the mouse up and down.
04:42	The Camera view pans up and down
04:47	Now, Press Y twice.
04:51	The first y locks the rotation to the global y axis.
04:56	The second y locks the rotation to the local y axis.
05:00	Now move the mouse left to right.
05:05	The Camera view pans left to right and vice versa
05:12	Right click to to go back to camera view.
05:16	Next we shall dolly the camera. There are two ways to do this
05:21	First, press G to grab the camera.
05:25	Hold the Mouse Wheel or the MMB and move the mouse up and down.
05:43	Second way, you can move the camera along its local z axis. Press G.
05:53	Then press Z twice to lock the camera to the local z axis.
05:59	Now moving the mouse up and down gives the same effect.
06:11	Right click to to go back to camera view.
06:15	Tracking the camera view left to right or up and down involves moving it along the local X or Y axes.
06:24	Press G. press X twice and move the mouse left to right.
06:35	The Camera view tracks left to right and vice versa
06:42	Now press Y twice and move the mouse up and down.
06:48	The Camera view tracks up and down
06:53	Right click to to go back to camera view.
06:59	Blender also provides a fly mode for the camera.
07:05	Press Shift, F to enter the fly mode.
07:10	Now you can move the camera view in three ways.
07:14	First is using the shortcut keys on the keyboard.
07:19	Press W on the keyboard to zoom in.
07:30	Press S to zoom out
07:40	Press A to move to the left.
07:51	Press D to move to the right.
08:02	Right click to to go back to camera view.
08:05	Second method is using the mouse wheel or scroll in fly mode to zoom in and out of the camera view.
08:13	Press Shift, F to enter the fly mode.
08:18	Scroll the mouse wheel upwards to zoom in.
08:25	For shortcut, press numpad +
08:30	Scroll the mouse wheel downwards to zoom out.
08:38	For shortcut, press numpad -
08:43	Right click to to go back to camera view.
08:49	Last method is using the mouse wheel or scroll in fly mode to move the camera view left to right and vice versa.
08:59	Press Shift, F to enter the fly mode
09:04	Press D and scroll the mouse wheel up and down.
09:13	The Camera view moves left to right and vice versa.
09:28	Left click on the screen to lock the camera view.
09:33	Now, this is your new camera view.
09:38	So this wraps up our tutorial on Navigation - Camera View.
09:43	Now in a new file,
09:45	change the location of the camera and the camera view, roll, pan, dolly and track your camera
09:54	and use the fly mode to select a new camera view.
10:00	This Tutorial is created by Project Oscar and supported by the National Mission on Education through ICT.
10:08	More information on the same is available at the following links oscar.iitb.ac.in, and spoken-tutorial.org/NMEICT-Intro.
10:27	The Spoken Tutorial Project
10:30	conducts workshops using spoken tutorials
10:33	also gives certificates to those who pass an online test.
10:38	For more details, please write us to contact @ contact spoken hypen tutorial.org
10:45	Thanks for joining us
10:47	and this is Monisha from IIT Bombay signing off.

Contributors and Content Editors

Kavita salve, PoojaMoolya, Pratik kamble, Sakinashaikh, Sandhya.np14, Sneha