KiCad/C2/Electric-rule-checking-and-Netlist-generation/Khasi

From Script | Spoken-Tutorial
Revision as of 16:13, 30 December 2016 by George 030390 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Time Narration
00:01 Paralok baieid,
00:03 Ngi pdiang sngewbha ia phi sha ka spoken tutorial halor ka Electric rule check and Netlist generation in KiCad.
00:09 Ha kane ka jinghikai, ngin pule shaphang
00:12 Ban buh ia ki values jong ki component
00:14 Ban leh electric rule check bad
00:17 Ban pynmih netlist ia ka schematic ba la dep shna.
00:21 Hangne ngi pyndonkam da ka Ubuntu 12.04 kum ka operating system
00:25 Bad da ka KiCad version: 2011 hyphen 05 hyphen 25'” na ka bynta kane ka jinghikai.
00:33 Khyndiat ka jingtip shaphang ka electronic circuit ka long kaba donkam ha kane ka jinghikai
00:38 U nongpyndonkam u hap ban tip ruh:* kumno ban design circuit schematic ha ka KiCad
00:42 Na ka bynta ki jinghikai kiba iadei, sngewbha leit sha ka: spoken hyphen tutorial.org
00:49 Ban sdang ia ka KiCad -
00:50 Leit hajrong sha kadiang duh jong ka Ubuntu desktop screen.
00:56 Click ha u icon ba nyngkong kaba mut Dash home.
01:01 Ha ka search bar , thoh "KiCad" bad nion Enter.
01:10 Kane kan plie ia ka KiCad main window.
01:13 Click ha u EEschema tab.
01:17 Ka Info dialog-box ka paw kaba ong ba kam lap ia ka schematic.
01:21 Bad Click OK.
01:23 Ngin jied ia ka file 'project1.sch' ba la dep shna lypa.
01:29 Leit ha ka File menu bad sa click Open.
01:33 Jied 'project1.sch' na ka jaka ba la buh.
01:44 Mynta ngin buh ia ka values jong ki components.
01:49 To ngin buh ia ka value ha u 'R2' component.
01:54 Buh ia u cursor halor u 'R', ba iadei bad u 'R2' resistor.
02:01 Click sha kamon bad jied Field Value.
02:05 Kane kan plie ia kaEdit Value Field window.
02:11 Thoh "1M" bad sa click OK.
02:17 Kumba phi iohi, '1M' (i.e. 1 mega ohm) value lah buh ha u resistor 'R2'.
02:24 Nga la dep ban buh ia ki values sha kiwei pat ki components ha kajuh ka rukom.
02:29 Nangta pat hap ban leh electric rules check ha kane ka circuit.
02:36 Leit ha ka panel ba hajrong jong ka 'EEschema' window.
02:39 Click ha u Perform electric rules check button
02:44 Kane kan plie ia ka EEschema Erc window.
02:48 Click ha uTest Erc button.
02:52 Mynta ngi lah ban iohi artyli ki errors.
02:56 Artylli ki errors kiba ong ba ki terminals kim don bor ding.
03:00 Click ha u Close button.
03:03 Ha ka schematic, ki error nodes la pynkdew da u khnam.
03:12 To ngin pyndait ia u power Flag hangne. Te, nangta ka KiCad kan tip ba ngi la pyndait bor ding hangne.
03:22 Na ka bynta kane,
03:24 Sha kamon jong ka panel, click ha u Place a power port button.
03:29 Mynta, click ha ka 'EEschema' window ban plie ia ka component selection window.
03:34 Click ha u List All button bad phin iohi ia ka list jong ka power notations.
03:40 Jied ia ka PWR_underscore FLAG bad sa click OK.
03:49 Ngin buh ia u Power flag hajan jong ka 'VCC' terminal.
03:55 Click ha u EEschema ban buh ia ka.
03:59 Ngi donkam artylli ki power flags namar ba don artylli ki errors ba kumjuh.
04:05 Buh ia u cursor ha ka ka power flag bad sa nioh ban 'c' copy ia ka.
04:10 Buh ia u power flag hajan ka ground terminal.
04:15 Mynta, ngin pyndait ia ka power flag bad ki wires. Leit sha ka panel ba sha kamon bad click Place a wire button.
04:24 Mynta, pyndait ia ka power flag sha ka VCC terminal.
04:35 Kumjuh ruh, pyndait ia ka power flag sha ka ground terminal.
04:44 Mynta ngin pyniad ia ka Schematic ERC check sa shisien ban pyntikna.
04:49 Na ka bynta kane, click ha u Perform electric rules check ba ha panel ba hajrong duh jong ka 'EEschema' window.
04:55 Kane kan plie ia ka'EEschema Erc' window.
04:58 Click ha u Test Erc button.
05:01 Mynta ngi lah ban iohi ba ym don jingbakla shuh.
05:04 Sa click Close.
05:07 Mynta, to ngin peit kumno ban generate Netlist.
05:10 Netlist ka ai jingtip shaphang ka list jong ki components bad nodes ba pyndaitlang ia ki.
05:16 Ngin peit ia ka jingpyndonkam jong ka netlist katba ngi dang iaid shakhmat ha kane ka jinghikai..
05:20 Ban pynmih netlist, leit ha ka panel ba hajrong duh. Click ha u netlist generation button.
05:27 Kane kan plie ia ka Netlist window.
05:31 Kane ka window ka don ia u tabs kaba ailad ia phi ban pynmih netlist ha kiba bunjait ki rukom..
05:38 Ia ka KiCad ngi pyndonkam da u Pcbnew tab.
05:42 Buh ia ka Default format option checked/ti bad click ha u Netlist button.
05:48 Buh jingmut ba ka saves ia ka netlist file da ka kyrteng 'project1.net'
05:54 Buh jingmut ruh ba ka netlist ba la pynmih, ka file kan saved da ka '.net' extension.
06:00 Click ha u Save button.
06:02 Peit ngan resize ia ka window.
06:04 Click ha u Save button.
06:06 Netlist file ka don ki jingtip shaphang ki components, ha ka circuit, ba donkam ha kaprinted circuit board design.
06:14 Ngin peit ia ka jingpyndonkam jong ka netlist file ha kawei pat ka jinghikai.
06:20 Leit sha ka File menu bad jied Save Whole Schematic Project ban save ia ka schematic.
06:27 Leit sha ka File menu bad jied Quit ban khang ia ka 'EEschema' window.
06:32 Ha ka KiCad main window,
06:34 Leit sha ka File menu bad jied Quit. Kane kan khang ia ka KiCad main window.
06:40 Ha kane ka jinghikai, ngi la tip kumno
06:44 Ban buh ia ki values jong ki components
06:46 Ban peit bad pynbeit ia ki errors ha ka circuit schematic
06:50 * Ban pynmih ia ka netlist jong ka circuit.
06:53 Peit ia ka video kaba don ha ka link harum.
06:56 Kan batai kyllum shaphang ka Spoken Tutorial project.
06:58 Lada phim don ia ka bandwith kaba biang, phi lah ban shu download bad peit.
07:02 Ka Spoken Tutorial project team:
07:04 *Ka ai jinghikai (workshops) da kaba pyndonkam da ki spoken tutorials.
07:07 *Ka ai certificates ruh ia kito kiba pass ia ka onlain (online) test.
07:10 Ban tip bniah, sngewbha thoh sha ka:

contact at spoken hyphen tutorial dot org.

07:16 'Spoken Tutorial project ka dei shibynta jong ka Talk to a Teacher project.
07:19 La kyrshan ia kane da ka National Mission on Education lyngba ka ICT, MHRD, ka Sorkar India.
07:25 Shibun ki jingtip halor kane ka jingthmu ka don ha ka:
07:28 spoken hyphen tutorial dot org slash NMEICT hyphen Intro.
07:34 Ia kane ka jingthoh (script) la noh synniang da u George B. Warjri.
07:39 Nga dei u John from Meghalaya, ngan pynkut noh. Khublei shibun.

Contributors and Content Editors

George 030390, PoojaMoolya