ESim/C4/Makerchip-IDE/English

Visual cue	Narration
Show Slide: Title slide	Welcome to the Spoken Tutorial on Makerchip IDE.
Show Slide: Learning objectives	In this tutorial, we will learn to Edit and run simulations in the Makerchip IDE
Show Slide: System requirements	To record this tutorial, I am using Ubuntu OS v20.04 eSim v2.2 The process demonstrated in this tutorial is similar in Windows OS also.
Show Slide: Pre-requisites https://spoken-tutorial.org	To follow this tutorial, the learner must have: Basic knowledge of eSim Familiarity with Verilog Basic knowledge of Makerchip-NgVeri feature For pre-requisite eSim tutorials, please visit this website.
Show Slide: Code Files	The files used in this tutorial are provided in the Code files link. Please download and extract the files. Make a copy and then use them while practicing.
Only Narration	Now, let us learn about Makerchip IDE and how to run the same from eSim.
Show eSim window with counter4bit.v	I have already opened the counter4bit.v file under the Makerchip tab. We will simulate a 4 bit counter in Makerchip IDE.
Only Narration	Let us open the Makerchip IDE.
Click on the Accept Makerchip TOS option Point to the link	First we need to accept the Terms of Services given by Makerchip. To do so, click on the Accept Makerchip TOS option under the Makerchip tab. This option appears only for the very first time. A dialog box with a link to review the Terms of services appears.
Click on Yes	Click onYes to accept the Terms of Services.
Only narration	After accepting, this option won't appear in the future when the user restarts eSim.
Click on the Edit in Makerchip option Point to the dialog box	To open the Makerchip IDE, click on the Edit in Makerchip option. A dialog box appears on the screen to automate the top module.
Point towards Yes	If we choose Yes, a .tlv code with contents same as .v code will be created. Also, a top module will be added to the .tlv code. And the new .tlv code will be opened in Makerchip IDE.
Point towards No	If we choose No, the current raw Verilog file will be opened in the Makerchip IDE.
Click on Yes	Let us click on Yes. The Makerchip IDE gets started in a new browser window. Note that to edit in the Makerchip IDE, an active internet connection is required.
Makerchip IDE:	We can see the counter4bit.tlv file is opened in the Makerchip IDE.
	Note that the Makerchip IDE window has two panels.
Point towards the left panel	On the left panel, we can see three tabs.
Click on the EDITOR tab	The first is the EDITOR tab and it is used to edit the code. The counter4bit.v file is loaded under the EDITOR tab.
Click on the NAV-TLV tab	Next, the NAV-TLV tab is used to show the Navigable source code.
Click on the LOG tab	The third LOG tab shows the errors in the code.
Makerchip IDE: Click on the DIAGRAM tab	Now, let us look at the right side panel. We see three tabs are present. The first DIAGRAM tab shows the block diagram of the TL-Verilog code.
Click on the VIZ tab	The next is the VIZ tab. It is used for Visualization and Debug.
Click on the WAVEFORM tab	The third WAVEFORM tab is used to view the simulated waveforms.
Point to the cross mark in the WAVEFORM tab	Observe the cross mark near the WAVEFORM tab. It indicates that the waveform has not been generated. This denotes that the code may have some errors present in it.
Navigate to the LOG tab	So, let us rectify the errors. Navigate to the LOG tab in the top left panel.
Highlight all the error messages according to narration	All the error messages are listed at the bottom of the LOG tab in black color. We see that there is a list oflint_off errors. These errors are due to the lint_off commands which are already added in code. The lint_off commands are added as comments in the code.
Highlight the first error message	The first error is a lint_off error due to the keyword LATCH.
Navigate to the EDITOR tab	Navigate to the EDITOR tab in the top left panel.
Press Ctrl+F and type LATCH	For demonstration purposes, let us search the LATCH keyword in the EDITOR window. Press Ctrl+F keys together and type LATCH.
Navigate to the command verilator lint_off LATCH	Navigate to the command verilator lint_off LATCH.
Delete verilator lint_off LATCH	Since this command is throwing an error, let us delete it.
Only Narration	Likewise, I will remove all the lint_off errors. Please pause the tutorial and do the same in your code file.
Click on E Click on Compile/Sim	Now I have removed all the lint_off errors. Next, click on the dropdown E in the right corner of the left panel. Then click on Compile/Sim.
Click on the WAVEFORM tab	Let us check the WAVEFORM tab. The waveform is still not visible.
Switch to the LOG tab Point to the register error	Switch to the LOG tab to see if all the errors have been removed. We see a register error apart from lint_off error in the LOG tab.
Click on the EDITOR tab Search for reg	Click on the EDITOR tab. Search for the reg keyword in the EDITOR window.
Delete reg	Let us delete the reg keyword to avoid errors during compilation.
Only narration	Likewise remove all the errors as demonstrated.
Show slide: More about lint-off commands	To know more aboutlint_off errors please visit this website:https://verilator.org/guide/latest/warnings.html#list-of-warnings
Click on Compile	Now, click on Compile.
Point to the tick mark	After compilation, observe the tick mark near the WAVEFORM tab. It indicates that the code is now error-free.
Click on +sv and+counter4bit	Next click on +sv and +counter4bit tab on the left to view the waveform.
Click on the ZOOM IN option	Click on the ZOOM IN option at the top for a closer view of the waveform. I will keep zooming in until the waveform is clearly visible.
Only Narration	The counter output is not yet displayed. Let us edit the code to display the counter output.
Highlight random() Replace $random() with reset	In the Editor window, we see the top module has random() signals by default. So, let us replace random() with reset so that the counter gets the clock input.
Click on Compile Switch to WAVEFORM tab and ZOOM IN	Let us compile again. Switch to the WAVEFORM tab and ZOOM IN until the waveform is clearly visible.
Point to the out in the waveform.	We see the counter is counting up.
Highlighting the \TLV section	Let us see how to add a new signal in the TLV section.
Type *newsignal = 1'b0;	In the \TLV code section, type the code as shown.
Click on Compile Switch to WAVEFORM tab	Let us compile again. Switch to the WAVEFORM tab.
Click on +sv	Click on +sv.
Highlighting the newsignal	We see the newsignal has been added in the waveform. In this way, the TLV code can be added.
Only narration	This brings us to the end of this tutorial. Let us summarize.
Show Slide:Summary	In this tutorial, we learnt to Edit and run simulations in the Makerchip IDE
Show Slide:' Assignment	As an assignment, please do the following: Download and open the file shift.v in Makerchip Tab. shift.v file is available in Code files link Click on Edit in Makerchip option. Remove the errors appearing in the LOG tab. Compile and view the waveforms in the WAVEFORM tab. Add the required signals. Recompile and verify the waveforms.
Show Slide: About Spoken Tutorial Project	The video at the following link summarizes the Spoken Tutorial project. Please download and watch it.
Show Slide: Spoken tutorial workshops	The Spoken Tutorial Project team conducts workshops and gives certificates. For more details, please write to us.
Show Slide:Answers for THIS Spoken Tutorial	Please post your timed queries in this forum.
Show Slide: FOSSEE Forum	For any general or technical questions on eSim, visit the FOSSEE forum and post your question.
Show Slide: Circuit Simulation Project	The FOSSEE team coordinates theCircuit Simulation Project. For more details, please visit this site.
Show Slide: Textbook Companion Project	The FOSSEE team coordinates the TextBook Companion Project. For more details, please visit this site.
Show Slide: Lab Migration	The FOSSEE team coordinates the Lab Migration Project. For more details, please visit this site.
Show Slide: Acknowledgement	The Spoken Tutorialproject is funded by the Ministry of Education, Government of India.
Show Slide: Thank you	This is Josiga, a FOSSEE summer fellow 2022, IIT Bombay signing off. Thanks for joining.

Contributors and Content Editors

Nancyvarkey, Nirmala Venkat