QCad/C2/Drawing-Methods-in-QCAD/English-timed
Visual Cue | Narration |
Show slide number 1
(00-00:08)
|
0.00 Hello and welcome back to another QCAD tutorial.
|
Switch to slide number 2
(Cartesian coordinate system) (00:09-00:33)
|
0.09 Qcad uses Cartesian co-ordinate system, which consists of two numbered scales, called as x-axis, y-axis.
|
Switch to slide number 3
(Lesson Plan)(00:34-00:45). |
0.34 For this tutorial, I am using the GNU Linux operating system Ubuntu Version 10.04 LTS
|
Slide number 3
(Lesson Plan)(00:46-00:55) |
0.46 In this tutorial we will see
0.51 How to use command line to draw objects 0.53 and different drawing methods available in QCAD |
Switch to slide number 4
(Drawing methods) (00:56-4:08)
|
0.56 Let's first see how to use command line to put in co-ordinates to draw points and draw objects of required measurements.
|
Switch to slide number 4
(Drawing methods) (4:09-6:15)
|
4.09 First is Relative co-ordinates System,
|
Switch to slide number 4
(Drawing methods) (6:16-8:18)
|
6.16 Next is Relative Polar co-ordinate system
6.30 Let's try and draw the Previously drawn square using this relative polar coordinate system.
|
Switch to slide number 4
(Drawing methods) (8:19-11:09)
|
8.19 Third is the Direct distance method
Now I know exactly at what point I want line ahead
|
Switch to Slide 5
(Assignment) (11:10-11:27) |
11.10 Now that you are familiar with drawing methods and the coordinates system in QCAD.
11.15 Lets come to the to the ASSIGNMENT. [[Image:]] 11.17 i would like you to draw diagram as shown in the figure. 11.20 You can either use relative coordinate, relative polar, direct method or combination of any method to draw this. |
Switch to Slide 6
(Acknowledgement) 11:28-11:45)
|
11.29 I would like to acknowledge the spoken tutorial project which is part of the talk to a teacher project.
|
Switch to Slide 7
(11:46-11:52) |
11.46 Thank you.
|
Contributors and Content Editors
Minal, Nancyvarkey, PoojaMoolya, Pratik kamble, Sandhya.np14