Difference between revisions of "GIMP/C2/Rotating-And-Cropping-An-Image/English-timed"

|And in this image there is no white and only a bit black. So only a small space of this room is used. I’ll show you how must later.  

|In this image there are more details saved as compared to the 1st one. This is the 1st image I remember and this one I have got after conversion.  

|The 2nd image is a good base for doing post processing which results in a picture which has the mood of 1st image but looks better

|Now I have opened the two images in the GIMP so let’s us have a look at the histogram of the 2 images  

|The histogram is hidden in the image dialog, But we have 3 different way of reaching the image dialog, 1st way is on the tool bar

|2nd way is to click on Access The Image Menu here & click on dialogs,and the 3rd way is simply right click into the image then dialog, and histogram.  

| Here’s the histogram of the 1st image. Make it a bit bigger and here you see the distribution of different pixels of the different colors in the image.  

|Digital image is similar to painting by numbers. When u zoom into the image u see a lots of little tiles and each of this tiles has a different color which is called as a pixel and each color is defined by a value and I can show you these values here with the help of color picker.   

|When I use colour picker I get the values for red, green & blue. In this image the value of red is a bit less than green and blue. Green and blue have nearly and exactly the same value.  

|In this image here I have nos form 0-255, and we have a really dark part here but I don’t think it’ll make into the final image.  

 

 

|So we have room from 0 to 256, but we only use 120  which is less than half of data which we could use. And because of that a lot of information of the image is lost here  

|Let’s have a look at the histogram of the 2nd image. As we can see here there is more data in this histogram as compared to 1st one but the form of the curve is identical. U compare these 2 histograms.   

|Details in the 2nd image is spread out so the problem I have to solve here is to make the 2nd Image compressed like the 1st one but it should have a bit more of  details and it should have a bit more of contrast like this one in the 1st image.  

| 05.22

| When you press tab into the image window, the tool box here vanishes and helps me in getting the image as big as possible and I can switch the tool box on and off as per my requirement. So I can see it better what I am doing here and u can also see it better. 

|05.47

|Before I start the editing the image I have to change some settings. So I go to file, preference and here I go to window management, and choose the option here, keep above for the tool box and keep above for the docks and leave the rest of options as it is.

|I can select the tools from the tool box and get all option of the tool I have and selected. I can click back into the image and use tab to switch the tool box on and off.  

| The surface of the water is a very good clue. But we don’t see the horizon here and the streaks on the water are also a bit misleading. This here is not the horizon but just a curve in the river  

|So I don’t have a real clue where to set a ruler and check the horizon. I just have to relay on my eye which I don’t think is the worst way to do something in photography   

|Now I select the rotate tool and I choose normal forward instead of corrective backward and I set in preview as image and not the grid. Ok click into the image.  

| Here in the center there is a point called center of rotation and around that point the Image will be rotated and here is the dialog where we can set the angle about which we want to rotate the image  

| Here I have a slider which can help me in rotating the image but u can see  it is difficult to handle and I don’t think I have to tilt the image this much.

|So let’s go back to zero here and now I just use the style here to rotate the image. I think the image is bit tilted towards the right so I have to rotate the image to the left i.e. counter clock wise so I have to get here negative values. So I keep on changing the angle till I get the correct and straight image

|In the image I want to have of course the ship, the water and these birds here. And I don’t want to have in the image is this grass here, this part here and I m really not sure if I want to have this bank of the river in my image

|And I think I will crop this part of image because later I want to have the darkest part of the image i.e the birds here, the ship and then the trees, the bank behind the ship, and lastly the water and sky.

| I want to zoom into this part of the image as I want to include as much as possible the part of the river but nothing of the bank so I zoom into the part of the image here by pressing the hot key z.  

|Here’s another bird flying. So I go to the left side and I pull over the ruler close to the bank and leave it here. And press Shift + ctrl + E which brings me back to the image  

|Here it is a group of bird and single bird appear here. Now u can click the rulers away  

|On the lower part of image there is water but I think it’s not enough water in it and too much sky is included. I can lose this single bird up here because I want this group of birds to stay in the image.

| 11.08

|To check my work I select rule of thirds. My eye isn’t so bad because I divided the image into 3 different parts i.e the water, the trees and the sky. The ship is the one of the point of interest   

| I think this will work so I click into the image to crop. Press tab and shift + ctrl +E to enlarge the image.

| Before I say good bye, I should save the image which I should have done much earlier. I save the image as Fog.xcf and ‘xcf’ is the extension of GIMP’s own file format and it contains lots of helpful information of layers and undo information and much more from the GIMP.  

|I would like to hear from you. Tell me what you liked, what I could have made better by mailing me on to info@meetthegimp.org.

|This is Hemant Waidande dubbing for the Spoken Tutorial project