Difference between revisions of "ESim/C2/Mapping-Components-with-Footprints/English"

Revision as of 15:50, 11 June 2019

Visual cue	Narration
Show Slide: Opening Slide	Welcome to the spoken tutorial on “Mapping components with footprints”.
Show Slide: Learning Objectives	In this tutorial, we will learn to : Add connectors to a schematic. Map components with footprints using CvPcb. Generate netlist for PCB design.
Show Slide: System Requirements	This tutorial is recorded using- Ubuntu Linux OS version 16.04 eSim version 1.1.2
Show Slide: Prerequisites	To practice this tutorial, you should know: The basic concepts of electronic circuits. To create circuit schematic in eSim. To simulate the netlist in eSim. If not, watch the prerequisite eSim spoken tutorials on this website.
eSim Main window:	I have already opened eSim on my machine
eSim Main window: To open a project	Let us open example “7805VoltageRegulator” from the Examples folder of eSim.
eSim Main window: Click on Open project >> Double click on Downloads >> Double click eSim-1.1.2 folder >> Double click Examples >> Click on 7805VoltageRegulator >> Click on Open	Click on the Open Project button from the left toolbar. Then browse to the directory where you have installed eSim. I will double-click on Downloads. Double-click on eSim hyphen 1.1.2. Double-click on Examples. Click on 7805VoltageRegulator. Click on Open button at the bottom right corner.
eSim Main window: Click on Open Schematic	To open the schematic, click on Open Schematic button on the left toolbar.
eSim Schematic Editor Window: Scroll key or press F1 to zoom in Point the cursor to V1 (Sine) block and Point the cursor to Lm_7805 block.	The eSim Schematic Editor opens. I will zoom into the schematic. This circuit uses AC sine wave as input. And Lm_7805 subcircuit as a voltage regulator.
Switch back to the eSim Main window	I will switch back to the eSim Main window.
eSim Main window: Click on Simulation >> Point cursor on v(in1,in2) ngspice plot >> Point cursor on v(out) ngspice plot	Click on Simulation button on the left toolbar. We have given the AC signal as input. We can see the rectified 5 volts DC output.
Switch back to the eSim Main window	Let us learn how to map footprints with components. I will switch back to eSim Schematic Editor.
eSim Schematic Editor window: Hover the mouse over plot_v1, In1, In2 , sine	The schematic contains plots, labels and sources which are essential for simulation. These components are not required for PCB designing.
eSim Schematic Editor Window: Right click on sine source >> select Delete Component option Right click on plot_v1 i.e U1 component >> Select the Delete Component option	Let us delete the components that are not required for PCB designing. Right-click on sine source. Select the Delete Component option. Right-click on plot_v1 i.e. U1 component. And select the Delete Component option.
	Similarly, we will delete the remaining components which are not required.
eSim Schematic Editor window: Show DeletedProbesAndLabels.sch	I have deleted other components and their connections.
	Let us now add a connector for the output of the circuit schematic.
eSim Schematic Editor window: Click on Place component >> Click on editor.	Click on Place Component button from the right toolbar. Click anywhere on the editor.
Component Selection window: Type Conn in Filter field Select Conn underscore 01x02 Click on OK	Type Conn in the Filter field. Click on Conn underscore 01x02. Click on OK button at the bottom right of the Component Selection window.
	Conn underscore 01x02 will appear to be tied to the cursor.
eSim Schematic Editor window: Click once, anywhere on the right hand side of the schematic.	Let us place the Conn underscore 01x02 on the right side of the schematic. Click once to place the connector on the right side of the schematic.
eSim Schematic Editor window: Click on editor Click anywhere on the eSim Schematic Editor window	We also need a connector at the input to connect the external power supply. We have already selected Place component tool. Click anywhere on the eSim Schematic Editor window.
Component selection window: Type Screw_Terminal >> select Screw_Terminal_01x02 from the list. >> Click OK Click once to place the Screw underscore Terminal underscore 01x02 on left side.	Type Screw underscore Terminal in the filter box. Click on Screw underscore Terminal underscore 01x02 from the list. Click OK button at the bottom right corner of Component Selection window. Click once to place the connector on the left side of the schematic.
eSim Schematic Editor window: Right click on Screw_Terminal_01x02 >> Click on Orient Component,and select Mirror \|\| option.	Let us rotate Screw underscore Terminal underscore 01x02. Right-click on Screw underscore Terminal underscore 01x02 component. Select Orient Component from the drop-down menu and select Mirror two option.
eSim Schematic Editor window: Connecting wires to the schematic	Now, let us connect the connectors using wires. We have learnt to place wires earlier in this series. You can refer to the prerequisite tutorials, if required. Let us connect pin 1 of Screw_Terminal_01x02 to the wire connecting D3 and D4.
eSim Schematic Editor window: Show rest of the connected wires	I have connected rest of the nodes to their respective connectors.
eSim Schematic Editor window: Perform Annotation and ERC	All the components are connected. Let us annotate the schematic and perform ERC for the circuit schematic.
	Please refer to the prerequisite tutorials to learn how to perform annotation and ERC.
eSim Schematic Editor window: Press Ctrl and S key together.	Let us now save the schematic. Press Ctrl and S keys together to save this schematic. We will now learn how to map the components with their footprints. Footprint is the layout of a component which is placed on the Printed Circuit Board.
eSim Schematic Editor window: Click Run Cvpcb to associate components and footprints button.	Click on the Run CvPcb to associate components and footprints button at the top of the eSim Schematic Editor. This opens Cvpcb window.
Click on the OK button.	If you’re using Cvpcb for the first time, you will get a confirmation box. Here, click on the OK button.
click on the No button.	If you get another dialog box titled Confirmation, click on No button.
Cvpcb window: Hover the cursor over the leftmost panel.	The Cvpcb window is divided into three panels. The left panel shows the Libraries of the footprints.
Cvpcb window: Demonstrate Hover the cursor over the middle panel. Hover the cursor over the first column of the middle panel	The middle panel is divided into 3 columns. The first column in the middle panel shows the serial number.
Hover the cursor over the second column of the middle panel	The second column in the middle panel shows the reference ID of the components used in the schematic.
Hover the cursor over the third column of the middle panel	The third column in the middle panel shows the values of the corresponding components, if any.
Cvpcb window: Hover the cursor over right most panel	The right panel gives a list of footprints available in the libraries.
Cvpcb window: Demonstrate Hover the cursor to show Filter options	The top menu of Cvpcb window has 3 options to filter the footprints.
Hover the cursor over Filter footprint list by keywords.	This will filter the footprints by keywords.
Hover the cursor over Filter footprint list by pin count.	This will filter the footprints by pin count.
Hover the cursor over Filter footprint list by Library.	This will filter the footprints by the library.
	Now we will map the components with their appropriate footprints.
Cvpcb window: Click on Filter footprints list by library	Click on the option Filter footprints list by library from the top menu. If any other filters other than Filter footprints list by library are selected, please uncheck them.
	Please note that we are designing a board for Through Hole components.
Text on screen	Footprints which are meant for Through hole components, will have THT in their description.
Text on screen	Footprints which are meant for Surface Mount Device components, will have SMD in their description.
Cvpcb window: Click on C1 Click on Capacitors_THT from the leftmost panel	Click on C1, the first row C1 will be highlighted. Click on Capacitors_THT from the leftmost panel for selection of footprints of Through-hole capacitors.
Cvpcb window: Hover the cursor on the right panel	The list of Capacitors_THT footprints for selected component C1 will be available.
Footprint Window: Select any footprint from the right most panel	We can also view the selected footprint. To do so, select any footprint from the right panel.
Click View selected footprint	Click on View selected footprint from the top panel. This will open footprint window which displays the image of the selected footprint.
Cvpcb window: Select Capacitors_THT:CP_Radial_D5.0mm_P2.50mm>> Double-click on it	Now let us map the associated footprint for component C1. Let us locate the footprint with D 5.0 mm and P 2.50 mm. Double-click on it to assign this footprint.
Cvpcb window: Click on Connectors_Terminal_Blocks on the left most panel >> Locate TerminalBlock_Altech_AK300-2_P5.00mm in the right most panel Double click	For J1 connector: Click on J1, click on Connectors_Terminal_Blocks from the leftmost panel. Locate TerminalBlock_Altech_AK300-2_P5.00mm in the rightmost panel. Double-click on it to assign this footprint to J1.
Cvpcb window: Click on Pin_Headers on the left most panel >> Locate Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm from the right most panel >> Double click	For J2 connector: Click on J2, click on Pin_Headers from the leftmost panel. Locate Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm from the rightmost panel. Double-click on it.
Cvpcb window: Click on Lm_7805 Click on TO_SOT_Packages_THT on the left most panel >> Locate T0-220-3_Vertical from the right most panel >> Double click on T0-220-3_Vertical	For Lm_7805: Click on Lm_7805 Click on TO_SOT_Packages_THT from the leftmost panel. Locate T0-220-3_Vertical from the rightmost panel. Double-click on it to assign this footprint.
Cvpcb window: Show rest of the mapped footprints	I have mapped rest of the components with their appropriate footprints.
Cvpcb window: Click on Save footprint association in schematic component footprint fields at left corner of the top toolbar.	Now we will save this footprint association. Click on Save footprint association in schematic component footprint fields at the left corner of the top toolbar.
	This is a very important step and should not be skipped. It assigns the selected footprints to the components present in the schematic.
eSim Schematic Editor window : Switch from CvPcb to eSim Schematic Editor window.	Let us now generate the netlist of the circuit schematic required for PCB layout. I will go back to the eSim Schematic editor window.
eSim Schematic Editor window: Click on Generate netlist	Click on Generate netlist button at the top of eSim Schematic Editor window.
Netlist window: Click on Pcbnew tab Check Default option Click on Generate	Click on Pcbnew tab. Check the option Default format. Click on Generate button.
Save Netlist File window: Click on Save button at the bottom right corner	Then click on Save button at the bottom right corner.
	.net netlist file contains information about components and footprints assigned. This is crucial for Printed Circuit Board designing.
	With this, we come to the end of this tutorial. Let us summarize.
Show Slide: Summary	In this tutorial, we learnt to : Add connectors to a schematic. Map components with footprints using CvPcb. Generate netlist for PCB design.
Show Slide: Forum	Please post your timed queries in this forum.
Show Slide: FOSSEE Forum	Please post your general queries on eSim in this forum.
Show Slide: Textbook Companion	FOSSEE team coordinates the TBC project.
Show Slide: Acknowledgment http://spoken-tutorial.org	Spoken Tutorial Project is funded by NMEICT, MHRD, Govt. of India. For more details, visit this website.
Previous Slide	This is Saurabh from IIT Bombay, signing off. Thank you.

Contributors and Content Editors

Nancyvarkey, PoojaMoolya, Saurabhbansode

Difference between revisions of "ESim/C2/Mapping-Components-with-Footprints/English"

Revision as of 15:50, 11 June 2019

Contributors and Content Editors

Navigation menu

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Tools

@@ Line 2: / Line 2: @@
-{| style="border-spacing:0;width:15.928cm;"
+{| border=1
-|- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Visual cue'''
 || '''Narration'''
@@ Line 10: / Line 9: @@
 Opening Slide
-|| Welcome to the '''spoken tutorial '''on “'''Mapping components''' with''' footprints'''”.
+|| Welcome to the spoken tutorial on “'''Mapping components''' with''' footprints'''”.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Show Slide:'''
 Learning Objectives
-|| In this tutorial, we will learn''' '''to :* <div style="margin-left:1.27cm;margin-right:0cm;">Add '''connectors '''to a''' schematic.'''</div>
+|| In this tutorial, we will learn to :
-* <div style="margin-left:1.27cm;margin-right:0cm;">'''Map''' components with '''footprints''' using '''CvPcb.'''</div>
+* Add '''connectors '''to a''' schematic.'''
-* <div style="margin-left:1.27cm;margin-right:0cm;">Generate '''netlist''' for '''PCB design.'''</div>
+* '''Map components''' with '''footprints''' using '''CvPcb.'''
+* Generate '''netlist''' for '''PCB design.'''
 |- style="border:1pt solid #000000;padding:0.176cm;"
@@ Line 24: / Line 23: @@
 System Requirements
-|| This tutorial is recorded using-* <div style="margin-left:1.27cm;margin-right:0cm;">'''Ubuntu Linux OS version 16.04'''</div>
+|| This tutorial is recorded using-
-* <div style="margin-left:1.27cm;margin-right:0cm;">'''eSim '''version '''1.1.2'''</div>
+* '''Ubuntu Linux OS version 16.04'''
+* '''eSim '''version '''1.1.2'''
 |- style="border:1pt solid #000000;padding:0.176cm;"
@@ Line 32: / Line 31: @@
 Prerequisites
-|| To practice this tutorial, you should know:* <div style="margin-left:1.27cm;margin-right:0cm;">The basic concepts of '''electronic circuits.'''</div>
+|| To practice this tutorial, you should know:
-* <div style="margin-left:1.27cm;margin-right:0cm;">To create''' circuit schematic''' in '''eSim.'''</div>
+* The basic concepts of '''electronic circuits.'''
-* <div style="margin-left:1.27cm;margin-right:0cm;">To '''simulate''' the '''netlist''' in '''eSim.'''</div>
+* To create''' circuit schematic''' in '''eSim.'''
+* To '''simulate''' the '''netlist''' in '''eSim.'''
+If not, watch the prerequisite '''eSim''' spoken tutorials on this website.
-If not, watch the prerequisite eSim Spoken Tutorials on''' '''this website.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''eSim Main window:'''
 || I have already opened '''eSim''' on my machine
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''eSim Main window:'''
 To open a project
+|| Let us open example''' “7805VoltageRegulator”''' from the''' Examples''' folder of '''eSim.'''
-|| Let us '''open '''example''' “7805VoltageRegulator”''' from''' '''the''' Examples''' folder of '''eSim.'''
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''eSim Main window:'''
 Click on '''Open project'''
+>>
 Double click on '''Downloads'''
@@ Line 97: / Line 88: @@
-Click on '''Open '''button at the bottom right corner'''.'''
+Click on '''Open '''button at the bottom right corner.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''eSim Main window:'''
@@ Line 104: / Line 96: @@
 ||
-To open the '''schematic''', click on '''Open Schematic button '''on the left toolbar.''' '''
+To open the '''schematic''', click on '''Open Schematic button '''on the left toolbar.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''eSim Schematic Editor Window:'''
@@ Line 127: / Line 119: @@
 And '''Lm_7805''' '''subcircuit '''as a '''voltage regulator.'''
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| Switch back to the '''eSim''' '''main''' window
+|| Switch back to the '''eSim Main''' window
-|| I will switch back to the '''eSim''' '''main''' window.
+|| I will switch back to the '''eSim Main''' window.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| '''eSim Main Window:'''
+|| '''eSim Main''' window:
 Click on '''Simulation'''
@@ Line 152: / Line 145: @@
 ||
+Switch back to the '''eSim Main''' window
+|| Let us learn how to '''map footprints''' with '''components'''.
+I will switch back to '''eSim Schematic Editor'''.
-Switch back to the '''eSim''' '''main''' window
-|| Let us learn how to '''map''' '''footprints''' with components'''.'''
-I will switch back to '''eSim Schematic''' '''Editor'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| '''eSim Schematic Editor '''Window''':'''
+|| '''eSim Schematic Editor '''window:
-Hover the mouse over''' plot_v1''' , '''In1, In2 , sine'''
+Hover the mouse over''' plot_v1, In1, In2 , sine'''
-|| The '''schematic''' contains '''plot'''s, '''label'''s''' '''and '''sources; '''which are essential for '''simulation'''.
+|| The '''schematic''' contains '''plots, labels''' and '''sources''' which are essential for '''simulation'''.
 These '''components''' are not required for '''PCB designing.'''
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''eSim Schematic Editor Window:'''
 Right click on '''sine source'''
@@ Line 187: / Line 174: @@
 Select the '''Delete Component '''option
-|| Let us delete the '''component'''s that are not required for '''PCB''' '''designing'''.
+|| Let us delete the '''components''' that are not required for '''PCB designing'''.
@@ Line 202: / Line 189: @@
 |- style="border:1pt solid #000000;padding:0.176cm;"
 ||
-|| Similarly, we will delete the remaining '''component'''s which are not required.
+|| Similarly, we will delete the remaining '''components''' which are not required.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| '''eSim Schematic Editor '''window''':'''
+|| '''eSim Schematic Editor '''window:
+Show '''DeletedProbesAndLabels.sch'''
+|| I have deleted other '''components''' and their connections.
-'''Show '''DeletedProbesAndLabels.sch
-|| I have deleted other '''components '''and their''' '''connections.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 ||
-|| Let us now add a '''connector '''for the''' output''' of the '''circuit''' '''schematic'''.
+|| Let us now add a '''connector '''for the output of the '''circuit''' '''schematic'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| '''eSim Schematic Editor '''window''':'''
+|| '''eSim Schematic Editor '''window:
 Click on '''Place component '''
@@ Line 226: / Line 214: @@
 Click anywhere on the '''editor.'''
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| '''Component''' '''Selection''' Window<span style="color:#252525;">''':'''</span>
+|| '''Component Selection''' window:
-<span style="color:#252525;">Type </span><span style="color:#252525;">'''Conn '''</span><span style="color:#252525;">in </span><span style="color:#252525;">'''Filter '''</span><span style="color:#252525;">field</span>
+Type '''Conn ''' in '''Filter '''field
-<div style="color:#252525;">>></div>
-<span style="color:#252525;">Select </span><span style="color:#252525;">'''Conn underscore 01x02'''</span>
+Select '''Conn underscore 01x02'''
-<div style="color:#252525;">>></div>
-<span style="color:#252525;">Click on </span><span style="color:#252525;">'''OK'''</span>
+Click on '''OK'''
 || Type '''Conn '''in the''' Filter '''field.
-Click on <span style="color:#252525;">'''Conn underscore 01x02.'''</span>
+Click on '''Conn underscore 01x02.'''
-<span style="color:#252525;">Click on </span><span style="color:#252525;">'''OK '''</span><span style="color:#252525;">button at the bottom right of the </span>'''Component''' '''Selection''' window<span style="color:#252525;">'''.'''</span>
+Click on '''OK '''button at the bottom right of the '''Component Selection''' window.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 ||
 || '''Conn underscore 01x02 '''will appear to be tied to the cursor.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| <span style="color:#252525;">'''eSim Schematic Editor '''</span><span style="color:#252525;">window</span><span style="color:#252525;">''':'''</span>
+|| '''eSim Schematic Editor '''window:
-<div style="color:#252525;"></div>
-Click once, anywhere on the right hand side of the schematic.
+Click once, anywhere on the right hand side of the '''schematic'''.
 || Let us place the '''Conn <span style="color:#252525;">underscore </span>01x02''' on the right side of the '''schematic'''.
@@ Line 270: / Line 255: @@
 Click anywhere on the '''eSim Schematic Editor '''window
-|| We also need a '''connector''' at the '''input''' to connect the external '''power supply.'''
+|| We also need a '''connector''' at the input to connect the external '''power supply.'''
@@ Line 276: / Line 261: @@
-Click anywhere on the '''eSim Schematic Editor '''window'''.'''
+Click anywhere on the '''eSim Schematic Editor '''window.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| '''Component selection '''window''':'''
+|| '''Component selection '''window:
 Type '''Screw_Terminal '''
@@ Line 292: / Line 277: @@
-<div style="color:#252525;"></div>
-Click once to place the '''Screw <span style="color:#252525;">underscore </span>Terminal <span style="color:#252525;">underscore </span>01x02''' on left side.
+Click once to place the '''Screw underscore Terminal underscore 01x02''' on left side.
 || Type '''Screw underscore Terminal''' in the '''filter '''box.
-Click on '''Screw <span style="color:#252525;">underscore </span>Terminal <span style="color:#252525;">underscore </span>01x02 '''from the list.
+Click on '''Screw underscore Terminal underscore 01x02 '''from the list.
-Click '''OK '''button at the bottom right corner of '''Component''' '''Selection''' window.
+Click '''OK '''button at the bottom right corner of '''Component Selection''' window.
 Click once to place the '''connector''' on the left side of the '''schematic'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| <div style="color:#252525;">'''eSim Schematic Editor window:'''</div>
+|| '''eSim Schematic Editor window:'''
-<div style="color:#252525;"></div>
 Right click on''' Screw_Terminal_01x02'''
@@ Line 323: / Line 305: @@
-Select '''Orient Component '''from the drop-down menu''' '''and select '''Mirror || '''option.
+Select '''Orient Component '''from the drop-down menu and select '''Mirror two '''option.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| <span style="color:#252525;">'''eSim Schematic Editor '''</span><span style="color:#252525;">window</span><span style="color:#252525;">''':'''</span>
+|| '''eSim Schematic Editor '''window:
-<div style="color:#252525;"></div>
-<div style="color:#252525;"></div>
-<div style="color:#252525;"></div>
-<div style="color:#252525;"></div>
-<div style="color:#252525;"></div>
-Connecting wires to the schematic
+Connecting wires to the '''schematic'''
-|| Now, let us connect the '''connector'''s using wires.
+|| Now, let us connect the '''connectors''' using wires.
 We have learnt to place wires earlier in this series.
@@ Line 346: / Line 318: @@
-Let us connect '''pin 1''' of '''Screw_Terminal'''_'''01x02''' to the '''wire''' connecting '''D3''' and '''D4'''.
+Let us connect '''pin 1''' of '''Screw_Terminal_01x02''' to the wire connecting '''D3''' and '''D4'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| <span style="color:#252525;">'''eSim Schematic Editor '''</span><span style="color:#252525;">window</span><span style="color:#252525;">''':'''</span>
+|| '''eSim Schematic Editor '''window:
-<span style="color:#252525;">Show rest of the </span><span style="color:#252525;">'''connected'''</span><span style="color:#252525;"> </span><span style="color:#252525;">'''wires'''</span>
+Show rest of the connected wires
 ||
 I have connected rest of the '''nodes''' to their respective '''connectors.'''
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| <span style="color:#252525;">'''eSim Schematic Editor '''</span><span style="color:#252525;">window</span><span style="color:#252525;">''':'''</span>
+|| '''eSim Schematic Editor '''window:
@@ Line 362: / Line 334: @@
-|| All the components are connected.
+|| All the '''components''' are connected.
-Let us '''Annotate '''the '''schematic''' and perform '''ERC '''for the '''circuit''' '''schematic'''.
+Let us annotate the '''schematic''' and perform '''ERC '''for the '''circuit''' '''schematic'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-| style="color:#252525;" |
+||
-|| Please refer to the prerequisite tutorials to learn how to perform '''Annotation '''and '''ERC.'''
+|| Please refer to the prerequisite tutorials to learn how to perform annotation and '''ERC.'''
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| <div style="color:#252525;">'''eSim Schematic Editor window:'''</div>
+|| '''eSim Schematic Editor window:
 Press '''Ctrl and S''' key together.
-<div style="color:#252525;"></div>
@@ Line 384: / Line 353: @@
 Press '''Ctrl '''and''' S''' keys together to save this '''schematic.'''
-We will now learn how to map the components with their''' footprints.'''
+We will now learn how to map the '''components''' with their''' footprints.'''
 '''Footprint''' is the '''layout''' of a '''component''' which is placed on the '''Printed Circuit Board'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| <span style="color:#252525;">'''eSim Schematic Editor '''</span><span style="color:#252525;">window</span><span style="color:#252525;">''':'''</span>
+|| '''eSim Schematic Editor '''window:
-Click '''Run''' '''Cvpcb''' '''to associate components and footprints button'''.
+Click '''Run Cvpcb to associate components and footprints''' button.
 ||
-Click on the '''Run CvPcb to associate components and footprints '''button''' '''at the top of the''' eSim Schematic Editor'''.
+Click on the '''Run CvPcb to associate components and footprints '''button at the top of the''' eSim Schematic Editor'''.
 This opens '''Cvpcb window.'''
+|-
+||Click on the '''OK '''button.
+||If you’re using '''Cvpcb''' for the first time, you will get a confirmation box.
-If you’re using '''Cvpcb''' for the first time, you will get a confirmation box.
+Here, click on the '''OK '''button.
-Here, click on the '''OK '''button'''.'''
+|-
+||click on the '''No '''button.
+||If you get another dialog box titled '''Confirmation, '''click on '''No''' button.
-If you get another dialog box titled '''Confirmation, '''click on '''No''' button.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Cvpcb window:'''
+Hover the '''cursor''' over the leftmost panel.
+|| The '''Cvpcb window''' is divided into three panels.
+The left panel shows the '''Libraries''' of the '''footprints'''.
-Hover the '''cursor''' over the leftmost panel
-|| The '''Cvpcb window''' is divided into three '''panels.'''
-The left '''panel''' shows the '''Libraries''' of the '''footprints'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Cvpcb window: Demonstrate'''
-Hover the '''cursor''' over the middle panel
+Hover the '''cursor''' over the middle panel.
 Hover the '''cursor''' over the first column of the middle panel
-Hover the '''cursor''' over the second column of the middle panel
-Hover the '''cursor''' over the third column of the middle panel
 ||
-The middle '''panel''' is divided into 3 columns.
+The middle panel is divided into 3 columns.
-The first column in the middle '''panel''' shows the serial number.
-The second column in the middle '''panel''' shows the reference '''ID''' of the '''component'''s used in the '''schematic'''.
+The first column in the middle panel shows the serial number.
+|-
+||Hover the '''cursor''' over the second column of the middle panel
+||The second column in the middle panel shows the reference '''ID''' of the '''components''' used in the '''schematic'''.
-The third column in the middle panel shows the values of the corresponding components, if any'''.'''
+|-
+||Hover the '''cursor''' over the third column of the middle panel
+||The third column in the middle panel shows the values of the corresponding '''components''', if any.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Cvpcb window:'''
@@ Line 455: / Line 413: @@
 ||
-The right '''panel''' gives a list of '''footprints''' available in the '''libraries'''.
+The right panel gives a list of '''footprints''' available in the '''libraries'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Cvpcb window: Demonstrate'''
 Hover the cursor to show '''Filter options'''
-Hover the cursor over '''Filter footprint list by keywords'''.
->>
-Hover the cursor over '''Filter footprint list by pin count'''.
->>
-Hover the cursor over '''Filter footprint list by Library'''.
 || The top menu of '''Cvpcb''' window has 3 options to filter the''' footprints'''.
+|-
+||Hover the cursor over '''Filter footprint list by keywords'''.
+||This will filter the '''footprints''' by '''keywords'''.
-This will filter the '''footprints''' by '''keywords'''.
+|-
+||Hover the cursor over '''Filter footprint list by pin count'''.
+||This will filter the '''footprints''' by '''pin''' count.
-This will filter the '''footprints''' by '''pin''' count.
+|-
+||Hover the cursor over '''Filter footprint list by Library'''.
+||This will filter the '''footprints''' by the '''library'''.
-This will filter the '''footprints''' by the '''library'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 ||
@@ Line 500: / Line 447: @@
 || Please note that we are designing a '''board''' for '''Through Hole '''components.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-||
+|| Text on screen
 || '''Footprints''' which are meant for '''Through hole''' components, will have '''THT '''in their description.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-||
+|| Text on screen
 || '''Footprints''' which are meant for '''Surface Mount Device''' components, will have '''SMD '''in their description.
 |- style="border:1pt solid #000000;padding:0.176cm;"
@@ Line 515: / Line 462: @@
-Click on '''Capacitors_THT '''from the leftmost '''panel''' for selection of '''footprints''' of '''Through-hole capacitors'''.
+Click on '''Capacitors_THT '''from the leftmost panel for selection of '''footprints''' of '''Through-hole capacitors'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Cvpcb window: '''
-Hover the '''cursor''' on the right '''panel'''
+Hover the '''cursor''' on the right panel
 || The list of '''Capacitors_THT footprints''' for selected component '''C1''' will be available.
 |- style="border:1pt solid #000000;padding:0.176cm;"
@@ Line 525: / Line 472: @@
 Select any footprint from the right most panel
->>
-click '''View selected footprint'''
 || We can also view the selected '''footprint'''.
-To do so, select any '''footprint '''from the right '''panel'''.
+To do so, select any '''footprint '''from the right panel.
-Click on '''View selected footprint''' from the top '''panel'''.
+|-
+||Click '''View selected footprint'''
+||Click on '''View selected footprint''' from the top panel.
@@ Line 549: / Line 491: @@
-Let us locate the '''footprint''' with D 5.0 mm and P 2.50 mm''', '''double click on it to assign this footprint.
+Let us locate the '''footprint''' with D 5.0 mm and P 2.50 mm.
-|- style="border:1pt solid #000000;padding:0.176cm;"
-||
+Double-click on it to assign this '''footprint'''.
-|| <span style="color:#000000;">Explain the info, a footprint name holds</span>The name of the selected '''footprint''' holds the information about physical dimensions such as length, diameter, etc.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Cvpcb window: '''
@@ Line 567: / Line 509: @@
-Click on '''J1, '''click on '''Connectors_Terminal_Blocks '''from the leftmost '''panel'''.
+Click on '''J1, '''click on '''Connectors_Terminal_Blocks '''from the leftmost panel.
-Locate '''TerminalBlock_Altech_AK300-2_P5.00mm '''in the rightmost '''panel'''.
+Locate '''TerminalBlock_Altech_AK300-2_P5.00mm '''in the rightmost panel.
-Double-click on it to '''assign''' this footprint to '''J1'''.
+Double-click on it to assign this '''footprint''' to '''J1'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''Cvpcb window: '''
@@ Line 585: / Line 527: @@
 Double click
-|| For '''J2''' '''connector''':
+|| For '''J2 connector''':
-Click on '''J2''', click on '''Pin_Headers '''from the leftmost '''panel'''.
+Click on '''J2''', click on '''Pin_Headers '''from the leftmost panel.
@@ Line 596: / Line 538: @@
 Double-click on it.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| '''Cvpcb '''window''': '''
+|| '''Cvpcb '''window:
 Click on''' Lm_7805'''
@@ Line 613: / Line 555: @@
-Click on '''TO_SOT_Packages_THT '''from the leftmost '''panel'''.
+Click on '''TO_SOT_Packages_THT '''from the leftmost panel.
-Locate '''T0-220-3_Vertical '''from the rightmost '''panel'''.
+Locate '''T0-220-3_Vertical '''from the rightmost panel.
-Double-click on it to assign this footprint.
+Double-click on it to assign this '''footprint'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| <span style="color:#252525;">'''Cvpcb '''</span><span style="color:#252525;">window</span><span style="color:#252525;">''':'''</span>
+|| '''Cvpcb ''' window:
-<div style="color:#252525;">Show rest of the mapped footprints</div>
+Show rest of the mapped footprints
 ||
-I have mapped rest of the components with their appropriate footprints.
+I have mapped rest of the '''components''' with their appropriate '''footprints'''.
 |- style="border:1pt solid #000000;padding:0.176cm;"
-|| '''Cvpcb '''window''': '''
+|| '''Cvpcb '''window:
 Click on '''Save footprint association in schematic component footprint fields '''at left corner of the top toolbar.
-|| Now we will '''save''' this '''footprint''' association.
+|| Now we will save this '''footprint''' association.
@@ Line 644: / Line 586: @@
 |- style="border:1pt solid #000000;padding:0.176cm;"
 || '''eSim Schematic Editor '''window''' :'''
 Switch from '''CvPcb''' to '''eSim Schematic Editor''' window.
-|| Let us now generate the''' netlist '''of the '''circuit schematic '''required for''' PCB '''layout'''.'''
+|| Let us now generate the''' netlist '''of the '''circuit schematic '''required for''' PCB '''layout.
@@ Line 688: / Line 628: @@
 |- style="border:1pt solid #000000;padding:0.176cm;"
 ||
-|| '''.net netlist''' '''file '''contains information about '''components''' and '''footprints''' assigned.
+|| '''.net netlist''' file contains information about '''components''' and '''footprints''' assigned.
@@ Line 701: / Line 641: @@
 Summary
-|| In this tutorial, we learnt to :* <div style="margin-left:1.27cm;margin-right:0cm;">Add '''connector'''s''' '''to a '''schematic.'''</div>
+|| In this tutorial, we learnt to :
-* <div style="margin-left:1.27cm;margin-right:0cm;">Map components with '''footprints''' using '''CvPcb.'''</div>
+* Add '''connectors''' to a '''schematic.'''
-* <div style="margin-left:1.27cm;margin-right:0cm;">Generate '''netlist''' for '''PCB design.'''</div>
+* Map components with '''footprints''' using '''CvPcb.'''
+* Generate '''netlist''' for '''PCB design.'''
 |- style="border:1pt solid #000000;padding:0.176cm;"