Difference between revisions of "Ngspice/C2/DC-Sweep-Analysis/English-timed"
From Script | Spoken-Tutorial
Sandhya.np14 (Talk | contribs) |
|||
Line 12: | Line 12: | ||
|- | |- | ||
| 00:01 | | 00:01 | ||
− | | Welcome to this '''spoken | + | | Welcome to this '''spoken tutorial''' on “'''DC sweep analysis in Ngspice'''”. |
|- | |- | ||
| 00:07 | | 00:07 | ||
− | | In this tutorial we will learn | + | | In this tutorial, we will learn: |
|- | |- | ||
| 00:09 | | 00:09 | ||
− | | To perform | + | |* To perform '''DC sweep analysis''' and '''Nested DC sweep analysis.''' |
|- | |- | ||
| 00:14 | | 00:14 | ||
− | | Basic knowledge of '''electronic | + | | Basic knowledge of '''electronic circuits''' is a prerequisite for this tutorial. |
|- | |- | ||
| 00:19 | | 00:19 | ||
− | | Basic knowledge of '''Ubuntu | + | | Basic knowledge of '''Ubuntu Linux''' and '''shell commands''' is also required. |
|- | |- | ||
| 00:25 | | 00:25 | ||
− | | | + | | '''Ubuntu 12.04''' is the '''operating system''' used with '''ngspice''' version 23 installed. |
|- | |- | ||
Line 40: | Line 40: | ||
|- | |- | ||
| 00:36 | | 00:36 | ||
− | | The | + | | The circuit consists of three prominent '''nodes'''- “1”, “2” and “3”. |
|- | |- | ||
| 00:40 | | 00:40 | ||
− | | In addition, a fourth '''node''' called as '''reference OR datum node''' must be marked as node | + | | In addition, a fourth '''node''' called as '''reference''' OR '''datum node''' must be marked as node “0”. |
|- | |- | ||
| 00:47 | | 00:47 | ||
− | | This is mandatory for any | + | | This is mandatory for any circuit. |
|- | |- | ||
| 00:51 | | 00:51 | ||
− | | Let us open the '''ngspice | + | | Let us open the '''ngspice netlist''' file "example.cir" corresponding to the '''circuit schematic''' shown before, in the '''text editor'''. |
|- | |- | ||
| 01:00 | | 01:00 | ||
− | | I have already opened this file in '''gedit | + | | I have already opened this file in '''gedit''' text editor. |
|- | |- | ||
| 01:04 | | 01:04 | ||
− | | Note that '''netlist | + | | Note that '''netlist''' file is saved with ".cir" '''extension'''. |
|- | |- | ||
| 01:10 | | 01:10 | ||
− | | We can see all the | + | | We can see all the components like '''voltage source, resistors''' and information about '''nodes''' connecting them together. |
|- | |- | ||
| 01:18 | | 01:18 | ||
− | | '''dc | + | | ''' 'dc' command''' included in the '''netlist''' file is used to perform '''dc sweep analysis'''. |
|- | |- | ||
| 01:25 | | 01:25 | ||
− | | | + | | General form to use ''''dc' command''' is as shown: |
|- | |- | ||
Line 80: | Line 80: | ||
|- | |- | ||
| 01:35 | | 01:35 | ||
− | | where | + | | where |
|- | |- | ||
| 01:37 | | 01:37 | ||
− | | '''SRCNAM''' is name of | + | | '''SRCNAM''' is name of independent voltage and current '''source.''' |
|- | |- | ||
| 01:42 | | 01:42 | ||
− | | '''VSTART, VSTOP and VINCR''' are the starting, final and increment values respectively for the '''source.''' | + | | '''VSTART, VSTOP''' and '''VINCR''' are the starting, final and increment values respectively, for the '''source.''' |
|- | |- | ||
| 01:51 | | 01:51 | ||
− | | As you see we are | + | | As you see, we are '''sweep'''ing '''voltage source V1''' for a single value of 24 '''VOLTS''' with the step increment of 1. |
|- | |- | ||
| 02:02 | | 02:02 | ||
− | | Now we will '''simulate''' this | + | | Now, we will '''simulate''' this circuit and find out voltage values at different nodes. |
− | + | ||
|- | |- | ||
| 02:08 | | 02:08 | ||
− | | | + | | Let us open '''ngspice''' through '''terminal.''' |
|- | |- | ||
| 02:11 | | 02:11 | ||
− | | Press '''Control Alt T''' together. | + | | Press '''Control, Alt, T''' together. |
|- | |- | ||
| 02:14 | | 02:14 | ||
− | | This will open the '''Terminal | + | | This will open the '''Terminal window.''' |
|- | |- |
Revision as of 18:33, 24 January 2016
Title of the Script: DC sweep analysis in ngspice
Author: Abhishek
Keywords: video tutorial, ngspice.
Time | Narration |
---|---|
00:01 | Welcome to this spoken tutorial on “DC sweep analysis in Ngspice”. |
00:07 | In this tutorial, we will learn: |
00:09 | * To perform DC sweep analysis and Nested DC sweep analysis. |
00:14 | Basic knowledge of electronic circuits is a prerequisite for this tutorial. |
00:19 | Basic knowledge of Ubuntu Linux and shell commands is also required. |
00:25 | Ubuntu 12.04 is the operating system used with ngspice version 23 installed. |
00:33 | We will use the example circuit shown. |
00:36 | The circuit consists of three prominent nodes- “1”, “2” and “3”. |
00:40 | In addition, a fourth node called as reference OR datum node must be marked as node “0”. |
00:47 | This is mandatory for any circuit. |
00:51 | Let us open the ngspice netlist file "example.cir" corresponding to the circuit schematic shown before, in the text editor. |
01:00 | I have already opened this file in gedit text editor. |
01:04 | Note that netlist file is saved with ".cir" extension. |
01:10 | We can see all the components like voltage source, resistors and information about nodes connecting them together. |
01:18 | 'dc' command included in the netlist file is used to perform dc sweep analysis. |
01:25 | General form to use 'dc' command is as shown: |
01:29 | dot DC SRCNAM VSTART VSTOP VINCR |
01:35 | where |
01:37 | SRCNAM is name of independent voltage and current source. |
01:42 | VSTART, VSTOP and VINCR are the starting, final and increment values respectively, for the source. |
01:51 | As you see, we are sweeping voltage source V1 for a single value of 24 VOLTS with the step increment of 1. |
02:02 | Now, we will simulate this circuit and find out voltage values at different nodes. |
02:08 | Let us open ngspice through terminal. |
02:11 | Press Control, Alt, T together. |
02:14 | This will open the Terminal window. |
02:18 | Now I go to the folder where the netlist file, example.cir, is saved. |
02:23 | I do this as follows: |
02:26 | cd downloads path to the folder and press Enter. |
02:33 | Now let us simulate the ngspice file. |
02:36 | Let us see how this can be done. |
02:39 | On terminal, |
02:40 | Type ngspice space example.cir and press Enter. |
02:51 | Value of voltage v1 is 24 volts. |
02:56 | Value of voltage v2 is 9.746 volts. |
03:01 | Other node voltages are also displayed. |
03:05 | Next we will see how to do nested dc sweep analysis. |
03:10 | Generalized form for this is as shown. |
03:14 | Dot DC SRCNAM VSTART VSTOP VINCR SRC2 START2 STOP2 INCR2 |
03:24 | where, |
03:26 | SRCNAM is the primary sweep variable and SRC2 is the secondary sweep variable. |
03:33 | Secondary sweep variable forms the outer loop. |
03:36 | That is for every increment of secondary sweep variable, the first sweep variable is stepped through its entire range of values. |
03:45 | It will be more clear with the example circuit we will simulate. |
03:50 | We will use Bipolar junction transistor based circuit in common base configuration. |
03:56 | Primary sweep variable is voltage Vin connected between emitter and base terminals. |
04:03 | Secondary sweep variable will be the load resistor Rload. |
04:08 | We will plot output voltage versus input voltage for different values of the load resistor. |
04:14 | The output voltage is the voltage across Rload and the input voltage is Vin |
04:21 | Following is the netlist corresponding to the common base transistor circuit. |
04:26 | NPN is the default model used for transistor, mod1, in the circuit. |
04:33 | As you can see Vin is varied from 0.2 volts to 2 volts with step increment of 0.02 volts. |
04:45 | Rload is varied from 5kiloohms to 10 kiloohms with step increment of 2kiloohms |
04:53 | For different values of Rload, Vin is swept through the complete range of 0.2 to 2. |
04:59 | Graphs of output voltage versus input voltage is plotted in each case. |
05:05 | Plot v of 3,4 plots the voltage drop between the nodes 3 and 4, that is the voltage across Rload. |
05:15 | Now we will simulate this circuit and see the results. |
05:19 | On the terminal type source space example nested.cir and press Enter. |
05:35 | This will run the simulation. |
05:37 | source command is used to simulate the netlist from within the ngspice simulator environment |
05:44 | As you can see graph of output voltage versus input voltage is plotted for different values of load resistor. |
05:52 | Quit the ngspice simulator by typing quit and press enter. |
05:59 | Here we come to the end of this tutorial |
06:02 | In this tutorial we learnt, |
06:04 | To perform, |
06:05 | DC sweep analysis of a given circuit. |
06:08 | Nested DC sweep analysis of a given circuit. |
06:12 | Watch the video available at the following link |
06:14 | It summarizes the Spoken Tutorial project |
06:18 | If you do not have good bandwidth, you can download and watch it |
06:22 | The Spoken Tutorial Project Team |
06:24 | Conducts workshops using spoken tutorials |
06:27 | Gives certificates for those who pass an online test |
06:31 | For more details, please write to contact at spoken hyphen tutorial dot org |
06:37 | Spoken Tutorial is a part of the Talk to a Teacher project |
06:41 | It is supported by the National Mission on Education through ICT, MHRD, Government of India |
06:47 | More information on this Mission is available at |
06:51 | spoken hyphen tutorial dot org slash NMEICT hyphen Intro |
06:58 | Thank you for joining. |
06:59 | Hope you found this tutorial useful. |
07:02 | This is Anuradha Amrutkar signing off. |