Difference between revisions of "OpenFOAM/C3/Downloading-and-installing-Salome/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
(Created page with 'Tutorial: Creating and meshing a Curved-Pipe Geometry in Salome for OpenFOAM. Script and Narration : Saurabh S. Sawant Keywords: Video tutorial,CFD. {| style="border-spac…')
 
 
Line 1: Line 1:
−
Tutorial: Creating and meshing a Curved-Pipe Geometry in Salome for OpenFOAM.
 
−
 
−
 
−
Script and Narration : Saurabh S. Sawant
 
−
 
−
 
−
Keywords: Video tutorial,CFD.
 
−
 
−
 
−
 
 
{| style="border-spacing:0;"
 
{| style="border-spacing:0;"
 
| style="border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| <center>Visual Cue</center>
 
| style="border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| <center>Visual Cue</center>
Line 14: Line 4:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 1: Title
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 1
−
 
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hello and welcome to the''' spoken tutorial '''on '''Downloading and''' '''Installing ''Salome.'''''
−
Play the slide
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hello and welcome to the spoken tutorial on '''Creating and meshing a Curved-Pipe Geometry in Salome for OpenFOAM.'''
+
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 2 : Learning Objectives
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 2 : Learning Objectives
−
 
−
Play the slide
 
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this '''tutorial''' we will see:
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this '''tutorial''' we will see:
  
−
To create '''curved pipe geometry''' in '''''Salome.'''''
+
'''How to download and install ''Salome''.'''
−
 
+
−
To '''mesh''' the '''geometry''' in the '''''Salome.'''''
+
−
 
+
−
To''''' ''modify '''the '''mesh '''using''' ''submesh.'''''
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 3: System Requirement
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 3:  
  
−
Play the slide
+
System Requirement
  
  
Line 41: Line 23:
  
  
−
I am using '''Linux operating system ''Ubuntu'' 12.10'''
+
I am using '''Linux operating system ''Ubuntu'' 12.10 '''
  
 
and
 
and
Line 51: Line 33:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 4:Prerequisites
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 4:  
  
−
Play the slide
+
Introduction
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To practice this '''tutorial''' the learner should have Salome installed on his computer, if not, you may refer to the''' tutorial''' on,
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me introduce you to '''''Salome'''''
  
−
'''Downloading and Installing Salome.'''
 
  
 +
It is an opensource software
  
  
 +
It can be used in '''Pre and Post-processing''' for '''numercal simulation'''
  
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open '''''Salome'' software''' by clicking on the '''''Salome ''icon''' on the '''desktop.'''
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open '''''Salome'' software''' by clicking on the '''''Salome ''icon''' on the '''desktop.'''
 
−
 
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on the '''''Geometry module '''''in the '''''Modules''''' '''bar.'''
 
−
 
−
 
−
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on the '''''Geometry module '''''in the '''''Modules''''' '''bar.'''
 
  
 +
It is advantageous for creating complex '''''CAD''''' '''geometries'''
  
  
 +
than '''''blockMesh ''utility''' in '''''OpenFOAM'''''
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on''' ''New.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on''' ''New.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To '''install ''Salome''''',
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on ''''''New Entity'''''' in the '''top''' '''menu bar.'''
+
−
 
+
−
 
+
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's click on ''''''New Entity'''''' in the '''top''' '''menu bar.'''
+
−
 
+
−
 
+
  
 +
Open the '''''Firefox'' browser'''
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''drop down options''', go to '''''basic'' '''and then '''''2d sketch'''.''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In the '''drop down options''', go to '''''basic'' '''and then '''''2d sketch'''.''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In the '''link bar '''type, [http://www.salome-platform.org/ www.salome-platform.org]
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''''Apply.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| First '''Point''' is at '''zero zero''', by default.
+
−
 
+
−
Press '''''Apply.'''''
+
−
 
+
  
 +
Press '''Enter.'''
  
 +
Now you are on the '''''Salome ''website.'''
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''second element type''''', '''''Arcs''.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, Go to '''''second element type''''', '''''Arcs''.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| On the left side, you will see '''''Navigation bar.'''''
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''Type''''' as '''''Direction''''' and '''''Direction'' '''as '''''Tangent''.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''Type''''' as '''''Direction''''' and '''''Direction'' '''as '''''Tangent''.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type the '''''Radius''''' -10 and tbe '''''Angle''''' as 90. Press '''''Apply'''.''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| ''Type the '''Radius''' -10 and tbe '''Angle''' as 90. Press '''Apply'''.''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''first element type''''', '''''Lines'''.''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Then ''select the '''first element type''', '''Lines'''.''
+
  
  
Line 122: Line 72:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the'' '''Type'' '''as''' ''Direction '''''and '''''Direction''''' as'' '''Tangent.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the'' '''Type'' '''as''' ''Direction '''''and '''''Direction''''' as'' '''Tangent.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| At the bottom of the '''''Navigation bar''''', you will see '''''New User''''' '''option. '''Click on it.
−
 
+
−
 
+
−
 
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In front of '''''length'',''' type 30.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In front of '''''length'',''' type 30.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| It will direct you to the window where you will have to put your '''personal '''details.
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''''Apply''''' and then'' '''Close'''.''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Press '''''Apply''''' and then'' '''Close'''.''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| After putting the details, click on the '''''register ''tab '''at the bottom.
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Zoom in'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me '''zoom in''' for the close view.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You will be directed to the screen showing the message that
  
−
|-
+
you have been '''registered'''.
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open the '''Geometry tree '''in the'' '''Object ''Browser.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open the '''Geometry tree '''in the'' '''Object ''Browser.'''
+
  
−
We can see '''''sketch_1.'''''
+
It also states that,
  
−
|-
+
to complete the '''registration process''' you will have to '''log in''' to your '''email'''.
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Check off '''to '''hide '''the''' sketch '''and '''check on''' to see it back.
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You can '''check off '''to '''hide '''the''' sketch '''or '''check on''' to see it back.
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''New Entity>>Blocks>> Divided Disk.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, Go to '''''New Entity>>Blocks>> Divided Disk.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In you '''email account '''open the '''email '''from '''''Salome.'''''
  
  
Line 158: Line 101:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''orientation''' as '''''OZX''' a''nd type the '''''radius''' ''equal to '''1.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''orientation''' as '''''OZX''' a''nd type the '''''radius''' ''equal to '''1.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on the '''link''' given in it.
−
 
+
−
 
+
−
 
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on ''''''Apply and Close'.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on ''''''Apply and Close'.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The '''link '''will direct you to the '''window''' where you will have to set your '''password'''.
  
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''New Entity>> Generation>> Extrusion Along Path.'''''
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, go to '''''New Entity>> Generation>> Extrusion Along Path.'''''
 
  
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''Base'' ''Object '''as '''Divided Disk_1'' '''
 
−
 
−
and '''Path Object''' as '''Sketch_1 '''from''' geometry tree.'''
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''Base'' ''Object '''as '''Divided Disk_1'' '''
 
  
−
and '''Path Object''' as '''Sketch_1 '''from''' geometry tree.'''
 
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''''Apply and Close.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Press '''''Apply and Close.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| After putting the '''password '''and confirming it, click on '''Set my password '''button.
−
 
+
−
'''''Pipe_1 ''object''' has been created in the '''geometry tree.'''
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''New Entity>>Explode.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Go to New Entity>>Explode.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| It will direct you to the '''window''' stating that,
  
−
|-
+
'''“Your password has been set successfully. You may now log in with your new password.”'''
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''Main Object''''' as '''''Pipe_1.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''Main Object''''' as '''''Pipe_1.'''''
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''''Sub-shapes''' '''Type'' drop down menu,''' select '''''Face.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In the '''''Sub-shapes''' '''Type'' drop down menu,''' select '''''Face.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| At the bottom in the '''navigation bar''' you can put your '''log in''' '''name''' and '''password '''to''' log in.'''
  
  
Line 202: Line 129:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Check on''' '''''Select sub-shapes.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Check on''' '''''Select sub-shapes.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, in the''' Navigation bar '''click on '''Download.'''
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Zoom in '''by''' scrolling up.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me '''zoom in '''by''' scrolling up.'''
+
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I can''' rotate the object '''by clicking on this '''rotation menu.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You will be directed to the page where you will see various '''binaries''' to '''download '''for different '''linux platforms'''.
  
  
Line 217: Line 140:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Hold the left mouse button '''and move the''' mouse upward to rotate the object.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Hold the left mouse button '''and move the''' mouse upward to rotate the object.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| As I am using '''64-bit architecture''', I will '''download ''Debian 6.0 Squeeze 64 bit binary.'''''
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Take the''' mouse pointer '''near the''' inlet face.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Take the''' mouse pointer '''as shown on the '''screen.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on it.
  
−
|-
+
Click on '''''Save File ''option.''' click on '''''Ok.'''''
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Hold the left mouse button.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Hold the left mouse button.'''
+
  
−
|-
+
It will take some time to '''download.'''
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Drag the mouse '''so that all the '''inlet faces '''fall into the''' rectangular area.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Drag the mouse '''so that all the '''inlet faces '''fall into the''' rectangular area.'''
+
  
  
Line 236: Line 155:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Release the mouse button.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Release the mouse button.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now '''scroll down.'' '''''You will see''''' Universal Binaries for Linux, '''''
  
−
|-
+
'''download ''64bit Linux binary.'''''
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on''' ''Show only selected ''button.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on''' ''Show only selected ''button''' to ensure that all the '''inlet faces''' have been selected.
+
  
−
|-
+
You have to''''' ''download'' '''''the appropriate '''version.'''
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and Close.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Apply and Close.'''''
+
  
−
We see five '''faces''' are created in the '''geometry tree.'''
+
I will '''download ''64 bit Linux'' version.'''
  
−
|-
+
Again click on '''''Save'' file. '''Click on''' Ok. '''It will take a while.
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''New Entity>>Group>>Create.'''''
+
  
−
 
+
I have already downloaded the files.
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, click on '''''New Entity>>Group>>Create.'''''
+
  
  
Line 260: Line 172:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the''''' ''main shape '''as''''' Pipe_1 '''''from the''''' ''geometry tree.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the''''' ''main shape '''as''''' Pipe_1 '''''from the''''' ''geometry tree.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now Open the''' Home folder. '''Go to''' Downloads''' from the left hand side option.
  
  
Line 267: Line 179:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the''' '''third''' Shape Type''',''''' ''Faces.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the''' '''third''' Shape Type''',''''' ''Faces.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The '''downloaded files''' are found here.
  
 +
One file is the '''tar file '''and another is''' self-extracting file.'''
  
  
  
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the newly created five '''faces '''from the''' geometry tree. Add''' them by clicking on''' ''Add ''button.'''
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Then select the newly created five '''faces '''from the''' geometry tree. Add''' them by clicking on''' ''Add ''button.'''
 
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Name the group as ''''''inlet'.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Name the group as ''''''inlet'.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Copy '''these two fles.  
  
  
Line 285: Line 195:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''Apply and close.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Press '''Apply and close.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go back to the '''''Home folder''''' and '''paste''' the two files here.
−
 
+
−
We see''''' inlet ''group '''ha'''s been created.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Follow the similar procedure on the other end of the '''pipe''' and '''group''' those''' faces''' as''''' outlet.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Follow the similar procedure on the other end of the '''pipe''' and '''group''' those''' faces''' as''''' outlet.'''''
+
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I have created the''' ''outlet ''group.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now double click on '''''installWizzard''''' '''tar file.'''
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''''modules ''drop down menu '''select '''''Mesh.'''''
+
−
 
+
−
 
+
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, in the '''''modules ''drop down menu '''select '''''Mesh.'''''
+
  
  
Line 309: Line 206:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''top menu bar''', click on '''''Create Mesh.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| New '''window''' will open.
  
−
 
+
Click on '''''Exctract'' menu '''at the top.
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, in the '''top menu bar''', click on '''''Create Mesh.'''''
+
  
  
Line 319: Line 215:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''Geometry''' as''' ''Pipe_1''''' from the '''geometry tree.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''Geometry''' as''' ''Pipe_1''''' from the '''geometry tree.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now click on '''''Extract'' tab'''.
−
 
+
−
 
+
  
 +
After the '''extraction '''is complete, click on '''''Quit.'''''
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on ''''''Assign a set of hypotheses' '''''and select ''''''3D: Automatic Hexahedralization'.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
 
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''IntallWizzard''''' has been''' extracted''' in the'' '''Home f''older.'''
−
 
+
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on ''''''Assign a set of hypotheses' '''''and select ''''''3D: Automatic Hexahedralization'.'''''
+
−
 
+
−
 
+
−
 
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''Number of Segments''''' 12.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
 
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now''' minimize ''Home '''''folder.
−
 
+
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''Number of Segments''''' 12.
+
−
 
+
−
 
+
−
 
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''OK.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
 
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open '''command terminal. '''
−
 
+
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''OK.'''''
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and Close.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Apply and Close.'''''
+
−
 
+
−
We see''''' Mesh_1 '''''in the''' geometry tree.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Right click on '''''Mesh_1 '''''and click on''''' Compute.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Right click on '''''Mesh_1 '''''and click on''''' Compute.'''''
+
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see''''' ''Mesh '''has been created.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''''ls '''''and press '''''Enter.'''''
  
 +
We are in the '''''Home folder.'''''
  
  
  
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Zoom in'''
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me''' Zoom in.'''
 
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Move''' the '''object '''by this '''''panning'' option.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You can '''move''' the '''object '''by this '''''panning'' option.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to '''''InstallWizard'' folder '''by typing,
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Refine '''the '''mesh '''in the''' flow direction.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now we will '''refine '''the '''mesh '''in the''' flow direction.'''
+
−
 
+
  
 +
'''''cd ''(space) (capital) ''I '''''and press '''''Tab''''' '''key''' to''' automatically '''get the whole file name.
  
 +
Press '''''Enter.'''''
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go back to the''' geometry module '''from '''''modules ''drop down menu'''.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To do so go back to the''' geometry module '''from '''''modules ''drop down menu'''.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''''ls '''''and press '''''Enter.'''''
−
 
+
−
 
+
−
 
+
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Get the proper '''view''' by using '''''panning''''' and''''' rotation''''' '''option.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, let me get the proper '''view''' by using '''''panning''''' and''''' rotation''''' '''option.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, to start '''installation '''type''' .''' '''(dot)''' '''/ (slash)''' '''''runInstall''''' '''(space) - (hyphen)''' '''''b '''''
  
−
|-
+
Note that '''I '''is '''capital.'''
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Go to New Entity>> Explode.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Go to New Entity>> Explode.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''main object '''as '''Pipe_1.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''main object '''as '''Pipe_1.'''
+
  
 +
Press '''''Enter.'''''
  
 +
''Type '''''1 (one)'' '''''for''' debian install.'''
  
 +
'''Installation''' process will start.
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select '''''sub-shapes''' '''Type, Edge.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
 
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| After it has been''' installed, '''Close the '''terminal.'''
−
 
+
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Sub-shapes''' '''Type, Edge.'''''
+
−
 
+
−
 
+
  
 +
Open a new''' terminal.'''
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Check''' '''on''' ''Select sub-shapes.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| ''Check''' '''on''' Select sub-shapes.'''''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, we will '''install ''Universal binaries.'''''
  
−
|-
+
We are already in the '''''Home ''folder.'''
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Move the '''window '''to the''' corner.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me move the '''window '''to the''' corner.'''
+
  
  
Line 431: Line 281:
  
 
|-
 
|-
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Take the '''mouse''' '''pointer '''near to the''' inlet.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, take the '''mouse''' '''pointer as s'''hown on the '''screen.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''. (dot) / (slash) (capital) ''S''''' and press '''''Tab'' key''' to '''automatically '''get the whole file name.
  
 +
Press '''''Enter.'''''
  
 +
Press '''''Enter''''' again.
  
  
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Hold the '''left mouse button.'''
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hold the '''left mouse button.'''
 
  
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Drag''' the '''mouse''' so that all the '''outlet edges''' fall inside the '''rectangular window.'''
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Drag''' the '''mouse''' so that all the '''outlet edges''' fall inside the '''rectangular window.'''
 
−
 
−
|-
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Release left mouse button.'''
 
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Release left mouse button.'''
 
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The selected '''edges''' would appear in '''white''' color.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| It says whether we want to '''download'' Salome''' ''in '''French.'''
  
 +
If''' '''no then type''' ''N'' '''and Press '''''Enter.'''''
  
 +
'''Installation''' process will start.
  
−
 
+
It may take a while.
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on''''' hide selected''''' in the '''''Sub-shape selection''''' '''window.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Then, click on''''' hide selected''''' in the '''''Sub-shape selection''''' '''window.'''
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Similarly, hide other 3 face edges.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Similarly, there are 3 more face edges that we need to select one by one and hide.'''
+
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| After that, you would only see the''' edges''' in the '''flow direction.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| After it has been '''installed,''' close the '''terminal.'''
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select all of these '''edges '''using similar method and click on '''Apply and Close.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select all of these '''edges '''using similar method and click on '''Apply and Close.'''
+
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In the''' geometry tree '''below '''''outlet''''' we see '''24 edges '''have been''' exploded.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You will see '''''Salome'' icon''' on the '''desktop.'''
  
−
 
+
'''Double click''' on it to open the '''''Salome'' software.'''
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''New Entity>>Group>>Create.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To group these''' edges '''go to '''New Entity>>Group>>Create.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select''' '''the''' Shape Type '''''as '''''Edge.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select''' '''the''' Shape Type '''''as '''''Edge.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''''Select the Main Shape as Pipe_1 from the geometry tree.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Select the Main Shape as Pipe_1 from the geometry tree.'''''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Select all of these exploded edges. '''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Now, select all of these exploded edges. '''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Add''' them by clicking on''' ''Add ''button.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Then, add''' them by clicking on''' ''Add ''button.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Name it as ''flowedges.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Name it as ''flowedges.'''''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Apply and close.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''Apply and close.'''
+
  
  
Line 515: Line 316:
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see,''''' flowedges'' group '''ha'''s '''been''' '''created.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Salome'' software '''has been''' installed '''and ready to use.
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to''' ''Mesh'' module '''from''' ''modules ''drop down option.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to''' ''Mesh'' module '''from''' ''modules ''drop down option.'''
+
−
 
+
−
 
+
  
−
 
+
You may now''' explore the software.'''
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Right click''' '''on '''''Mesh_1 '''''and click on''' ''Create Sub-mesh.'''''
+
−
 
+
−
 
+
−
 
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Right click''' '''on '''''Mesh_1 '''''and click on''' ''Create Sub-mesh.'''''
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Select''' the''' geometry''' as '''''flowedges''.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Select the geometry as ''flowedges''.'''
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Select the algorithm, ''wire discretization.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Select the algorithm, ''wire discretization.'''''
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on first button to''' '''the right of the '''drop down menu.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, to '''select''' the appropriate '''hypothesis '''click on first button to''' '''the right of the '''drop down menu.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on,''''' Nb. Segments''.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on,''''' Nb. Segments''.'''
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type the'' '''number of segment'' '''as''' '''30.
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type the'' '''number of segment'' '''as''' '''30.
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Ok. '''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Ok. '''''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and Close.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Apply and Close.'''''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Mesh_1 '''''and click on''''' Compute.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, click on '''''Mesh_1 '''''and click on''''' Compute.'''''
+
−
 
+
−
'''Refined mesh'' '''''has been created.
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the '''window.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Close the '''window.'''
+
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see''' mesh''' has been '''refined '''in the '''flow direction.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You may close the '''software.'''
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''File>> Save As'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To '''save '''this work,
+
−
 
+
−
Go to '''''File>> Save As'''''
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Name the file as '''''Curved-geometry.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Name the file as '''''Curved-geometry.'''''
+
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Save the work on the '''Desktop.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I am saving the work on the '''Desktop.'''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close''''' Salome.'''''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Close''''' Salome.'''''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to the file '''''Curved-geometry.hdf '''''on the''' desktop.'''
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see '''file '''has been '''saved as ''Curved-geometry.hdf.'''''
+
  
 
|-
 
|-
Line 620: Line 328:
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this '''tutorial''' we have learned:
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this '''tutorial''' we have learned:
  
−
To create '''curved pipe geometry''' in '''''Salome.'''''
+
To How to '''download''' '''install ''Salome.'''''
−
 
+
−
To '''mesh '''the '''geometry '''in''' ''Salome.'''''
+
−
 
+
−
To '''modify''' the '''mesh''' using''''' submesh.'''''
+
−
 
+
−
|-
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 12 : Assignment
+
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| For '''Assignment,'''
+
−
 
+
−
Create a pipe having '''inner diameter''' 6 '''units '''smaller than the '''outer diameter.'''
+
−
 
+
−
Change the '''angle '''of the '''bent.'''
+
−
 
+
−
 
+
−
 
+
  
 
|-
 
|-
Line 659: Line 352:
 
-Gives certificates to those who pass an online test
 
-Gives certificates to those who pass an online test
  
−
-For more details, contact@spoken-tutorial.org
+
-For more details, please write to contact@spoken-tutorial.org
  
 
|-
 
|-
Line 672: Line 365:
 
It is supported by the National Mission on Education through ICT, MHRD, Government of India.  
 
It is supported by the National Mission on Education through ICT, MHRD, Government of India.  
  
−
This project is coordinated by http://spoken-tutorial
+
More information on this mission is available at, http://spoken-tutorial.org/NMEICT-Intro
−
 
+
−
More information on this mission is available at,
+
−
 
+
−
http://spoken-tutorial.org/NMEICT-Intro
+
  
 
|-
 
|-
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
−
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I am Saurabh Sawant from IIT Bombay, Thank you.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I am Saurabh Sawant, from IIT Bombay, thank you.
  
 
|}
 
|}

Latest revision as of 12:09, 10 December 2015

Visual Cue
Narration
Slide 1 Hello and welcome to the spoken tutorial on Downloading and Installing Salome.
Slide 2 : Learning Objectives In this tutorial we will see:

How to download and install Salome.

Slide 3:

System Requirement


To record this tutorial,


I am using Linux operating system Ubuntu 12.10

and

Salome version 6.6.0



Slide 4:

Introduction

Let me introduce you to Salome


It is an opensource software


It can be used in Pre and Post-processing for numercal simulation


It is advantageous for creating complex CAD geometries


than blockMesh utility in OpenFOAM

To install Salome,

Open the Firefox browser

In the link bar type, www.salome-platform.org

Press Enter.

Now you are on the Salome website.

On the left side, you will see Navigation bar.



At the bottom of the Navigation bar, you will see New User option. Click on it.
It will direct you to the window where you will have to put your personal details.
After putting the details, click on the register tab at the bottom.
You will be directed to the screen showing the message that

you have been registered.

It also states that,

to complete the registration process you will have to log in to your email.

In you email account open the email from Salome.



Click on the link given in it.
The link will direct you to the window where you will have to set your password.



After putting the password and confirming it, click on Set my password button.
It will direct you to the window stating that,

“Your password has been set successfully. You may now log in with your new password.”

At the bottom in the navigation bar you can put your log in name and password to log in.



Now, in the Navigation bar click on Download.
You will be directed to the page where you will see various binaries to download for different linux platforms.



As I am using 64-bit architecture, I will download Debian 6.0 Squeeze 64 bit binary.
Click on it.

Click on Save File option. click on Ok.

It will take some time to download.



Now scroll down. You will see Universal Binaries for Linux,

download 64bit Linux binary.

You have to download the appropriate version.

I will download 64 bit Linux version.

Again click on Save file. Click on Ok. It will take a while.

I have already downloaded the files.



Now Open the Home folder. Go to Downloads from the left hand side option.



The downloaded files are found here.

One file is the tar file and another is self-extracting file.



Copy these two fles.



Go back to the Home folder and paste the two files here.
Now double click on installWizzard tar file.



New window will open.

Click on Exctract menu at the top.



Now click on Extract tab.

After the extraction is complete, click on Quit.

IntallWizzard has been extracted in the Home folder.
Now minimize Home folder.
Open command terminal.
Type ls and press Enter.

We are in the Home folder.



Go to InstallWizard folder by typing,

cd (space) (capital) I and press Tab key to automatically get the whole file name.

Press Enter.

Type ls and press Enter.
Now, to start installation type . (dot) / (slash) runInstall (space) - (hyphen) b

Note that I is capital.

Press Enter.

Type 1 (one) for debian install.

Installation process will start.

After it has been installed, Close the terminal.

Open a new terminal.

Now, we will install Universal binaries.

We are already in the Home folder.



Type . (dot) / (slash) (capital) S and press Tab key to automatically get the whole file name.

Press Enter.

Press Enter again.



It says whether we want to download Salome in French.

If no then type N and Press Enter.

Installation process will start.

It may take a while.

After it has been installed, close the terminal.
You will see Salome icon on the desktop.

Double click on it to open the Salome software.



Salome software has been installed and ready to use.

You may now explore the software.

You may close the software.
Slide 11: Summary In this tutorial we have learned:

To How to download install Salome.

Slide 13 :

About Spoken tutorials

The video is available at the following URL:

http://spoken-tutorial.org/What_is_a_Spoken_Tutorial

It summarizes the Spoken Tutorial project.

If you do not have good bandwidth, you can download and watch it.

Slide 14:

About Spoken tutorials

The Spoken Tutorial Project Team

-Conducts workshops using spoken tutorials

-Gives certificates to those who pass an online test

-For more details, please write to contact@spoken-tutorial.org

Slide 15:

Acknowledgement


Spoken Tutorials are part of Talk to a Teacher project,

It is supported by the National Mission on Education through ICT, MHRD, Government of India.

More information on this mission is available at, http://spoken-tutorial.org/NMEICT-Intro

I am Saurabh Sawant, from IIT Bombay, thank you.

Contributors and Content Editors

P12575, Pratik kamble

Retrieved from "https://script.spoken-tutorial.org/index.php?title=OpenFOAM/C3/Downloading-and-installing-Salome/English&oldid=24945"