Difference between revisions of "KiCad/C2/Mapping-components-in-KiCad/English-timed"
From Script | Spoken-Tutorial
PoojaMoolya (Talk | contribs) |
|||
| Line 2: | Line 2: | ||
|'''Time''' | |'''Time''' | ||
| − | |||
|'''Narration''' | |'''Narration''' | ||
|- | |- | ||
| − | | 00 | + | | 00:01 |
| Dear Friends, | | Dear Friends, | ||
|- | |- | ||
| − | | 00 | + | | 00:02 |
| Welcome to the spoken tutorial on Mapping components with footprints in KiCad | | Welcome to the spoken tutorial on Mapping components with footprints in KiCad | ||
|- | |- | ||
| − | | 00 | + | | 00:07 |
| In this spoken tutorial, we will learn | | In this spoken tutorial, we will learn | ||
|- | |- | ||
| − | | 00 | + | | 00:10 |
|To map components with corresponding footprints. | |To map components with corresponding footprints. | ||
|- | |- | ||
| − | | 00 | + | | 00:13 |
| Basic knowledge of electronic circuit is pre-requisite for this tutorial. | | Basic knowledge of electronic circuit is pre-requisite for this tutorial. | ||
|- | |- | ||
| − | | 00 | + | | 00:18 |
|User should know how to design circuit schematic in KiCad, | |User should know how to design circuit schematic in KiCad, | ||
|- | |- | ||
| − | | 00 | + | | 00:23 |
|And do electric rule check and netlist generation. | |And do electric rule check and netlist generation. | ||
|- | |- | ||
| − | | 00 | + | | 00:26 |
|For relevant tutorials, please visit spoken hyphen tutorial.org | |For relevant tutorials, please visit spoken hyphen tutorial.org | ||
|- | |- | ||
| − | |00 | + | |00:33 |
| We are using Ubuntu 12.04 as an operating system | | We are using Ubuntu 12.04 as an operating system | ||
|- | |- | ||
| − | |00 | + | |00:37 |
|With KiCad 2011 hyphen 05 hyphen 25 for this tutorial. | |With KiCad 2011 hyphen 05 hyphen 25 for this tutorial. | ||
|- | |- | ||
| − | | 00 | + | | 00:47 |
|To start KiCad, | |To start KiCad, | ||
| − | |||
| − | |||
|- | |- | ||
| − | | 00 | + | | 00:49 |
|Go to the top left corner of Ubuntu desktop screen. | |Go to the top left corner of Ubuntu desktop screen. | ||
|- | |- | ||
| − | | 00 | + | | 00:52 |
|Click on the first icon (i.e.)the Dash home. | |Click on the first icon (i.e.)the Dash home. | ||
|- | |- | ||
| − | | 00 | + | | 00:56 |
|In the search bar type 'KiCad' and press Enter. | |In the search bar type 'KiCad' and press Enter. | ||
|- | |- | ||
| − | | 01 | + | | 01:04 |
|This will open KiCad main window. | |This will open KiCad main window. | ||
|- | |- | ||
| − | |01 | + | |01:07 |
|To open EEschema, go to the top panel. Click on EEschema tab. | |To open EEschema, go to the top panel. Click on EEschema tab. | ||
|- | |- | ||
| − | | 01 | + | | 01:17 |
|An info dialog box will appear which says that it cannot find the schematic. | |An info dialog box will appear which says that it cannot find the schematic. | ||
|- | |- | ||
| − | | 01 | + | | 01:21 |
|Click on OK. | |Click on OK. | ||
|- | |- | ||
| − | | 01 | + | | 01:24 |
| I will use the circuit schematic of Astable multivibrator which was created earlier. | | I will use the circuit schematic of Astable multivibrator which was created earlier. | ||
| + | |||
|- | |- | ||
| − | |01 | + | |01:30 |
| To do this, I will go to the File menu, click on Open. | | To do this, I will go to the File menu, click on Open. | ||
|- | |- | ||
| − | | 01 | + | | 01:37 |
|I will bring this window in the visible area. | |I will bring this window in the visible area. | ||
|- | |- | ||
| − | | 01 | + | | 01:44 |
| Choose the folder in which the file is saved. | | Choose the folder in which the file is saved. | ||
|- | |- | ||
| − | | 01 | + | | 01:50 |
| and click on Open. | | and click on Open. | ||
|- | |- | ||
| − | | 01 | + | | 01:55 |
|This will open the circuit schematic. | |This will open the circuit schematic. | ||
|- | |- | ||
| − | |01 | + | |01:57 |
|I will zoom in using the scroll button of the mouse | |I will zoom in using the scroll button of the mouse | ||
|- | |- | ||
| − | | 02 | + | | 02:02 |
|We have already generated the netlist for this circuit. | |We have already generated the netlist for this circuit. | ||
|- | |- | ||
| − | | 02 | + | | 02:07 |
|Let us now look at the process of mapping the components used in the schematic with footprints. | |Let us now look at the process of mapping the components used in the schematic with footprints. | ||
|- | |- | ||
| − | | 02 | + | | 02:14 |
|Footprint is the actual layout of the component which is placed in the Printed Circuit Board. | |Footprint is the actual layout of the component which is placed in the Printed Circuit Board. | ||
|- | |- | ||
| − | | 02 | + | | 02:21 |
| To start mapping of the components, | | To start mapping of the components, | ||
|- | |- | ||
| − | |02 | + | |02:24 |
|Go to the top panel of EEschema window. | |Go to the top panel of EEschema window. | ||
|- | |- | ||
| − | | 02 | + | | 02:28 |
| Click on the Run Cvpcb button. | | Click on the Run Cvpcb button. | ||
|- | |- | ||
| − | | 02 | + | | 02:33 |
| This will open the Cvpcb window. | | This will open the Cvpcb window. | ||
|- | |- | ||
| − | | 02 | + | | 02:37 |
| It will also open a dialog box titled Component Library Error. | | It will also open a dialog box titled Component Library Error. | ||
|- | |- | ||
| − | | 02 | + | | 02:42 |
|Click on OK button to close it. | |Click on OK button to close it. | ||
|- | |- | ||
| − | | 02 | + | | 02:47 |
| Notice that it opens project1.net file. Please recall that we had generated this file in the netlist generation tutorial. | | Notice that it opens project1.net file. Please recall that we had generated this file in the netlist generation tutorial. | ||
|- | |- | ||
| − | | 02 | + | | 02:58 |
|The Cvpcb window is divided into two panels. | |The Cvpcb window is divided into two panels. | ||
|- | |- | ||
| − | | 03 | + | | 03:03 |
|The first column in the left panel is the serial number. | |The first column in the left panel is the serial number. | ||
|- | |- | ||
| − | | 03 | + | | 03:07 |
|The second column shows reference id for list of components used in schematic. | |The second column shows reference id for list of components used in schematic. | ||
|- | |- | ||
| − | | 03 | + | | 03:14 |
| The third column shows values of the corresponding components. | | The third column shows values of the corresponding components. | ||
|- | |- | ||
| − | | 03 | + | | 03:19 |
| The right panel gives a list of footprints available. | | The right panel gives a list of footprints available. | ||
|- | |- | ||
| − | | 03 | + | | 03:25 |
|Now we will map the components with their associated footprints. | |Now we will map the components with their associated footprints. | ||
|- | |- | ||
| − | | 03 | + | | 03:30 |
| We can see list of footprints available for selected component (i.e) C1 in the right part of Cvpcb window. | | We can see list of footprints available for selected component (i.e) C1 in the right part of Cvpcb window. | ||
|- | |- | ||
| − | | 03 | + | | 03:41 |
| We will now view footprint corresponding to the selected component. | | We will now view footprint corresponding to the selected component. | ||
|- | |- | ||
| − | | 03 | + | | 03:45 |
| On the top panel of Cvpcb window click on View selected footprint | | On the top panel of Cvpcb window click on View selected footprint | ||
|- | |- | ||
| − | | 03 | + | | 03:53 |
|This will open footprint window which displays the image of footprint selected. | |This will open footprint window which displays the image of footprint selected. | ||
|- | |- | ||
| − | | 04 | + | | 04:02 |
|We can also see images of different footprints by clicking on them | |We can also see images of different footprints by clicking on them | ||
|- | |- | ||
| − | | 04 | + | | 04:12 |
|I will close footprint window now. | |I will close footprint window now. | ||
|- | |- | ||
| − | | 04 | + | | 04:15 |
|For the first component C1, we will choose the footprint C1 from right panel. | |For the first component C1, we will choose the footprint C1 from right panel. | ||
|- | |- | ||
| − | | 04 | + | | 04:22 |
| To assign C1 footprint to first component, double click on the footprint. | | To assign C1 footprint to first component, double click on the footprint. | ||
|- | |- | ||
| − | | 04 | + | | 04:27 |
|As you can see, C1 footprint gets assigned to the first component in the list. | |As you can see, C1 footprint gets assigned to the first component in the list. | ||
|- | |- | ||
| − | | 04 | + | | 04:34 |
|Similarly for second component C2 also we will choose footprint C1 by double clicking on it. | |Similarly for second component C2 also we will choose footprint C1 by double clicking on it. | ||
|- | |- | ||
| − | | 04 | + | | 04:43 |
|For the next component D1 we choose LED hyphen 3MM. | |For the next component D1 we choose LED hyphen 3MM. | ||
|- | |- | ||
| − | | 04 | + | | 04:50 |
|For connector P1 we choose SIL hyphen 2 from the right panel. | |For connector P1 we choose SIL hyphen 2 from the right panel. | ||
|- | |- | ||
| − | | 05 | + | | 05:02 |
| I will scroll down in the right panel to select it. | | I will scroll down in the right panel to select it. | ||
|- | |- | ||
| − | | 05 | + | | 05:09 |
|For R1 we choose R3. | |For R1 we choose R3. | ||
|- | |- | ||
| − | | 05 | + | | 05:13 |
|For R2 we choose R3. | |For R2 we choose R3. | ||
|- | |- | ||
| − | | 05 | + | | 05:17 |
|For R3 we choose R3. | |For R3 we choose R3. | ||
|- | |- | ||
| − | | 05 | + | | 05:22 |
|For U1 i.e. LM555 we choose DIP hyphen 8 underscore 300 underscore ELL which is a standard eight pin IC footprint. | |For U1 i.e. LM555 we choose DIP hyphen 8 underscore 300 underscore ELL which is a standard eight pin IC footprint. | ||
|- | |- | ||
| − | | 05 | + | | 05:38 |
| Now we will save the netlist by clicking on Save netlist and footprint files button on the top panel of Cvpcb window. | | Now we will save the netlist by clicking on Save netlist and footprint files button on the top panel of Cvpcb window. | ||
|- | |- | ||
| − | | 05 | + | | 05:48 |
| This will open Save Net and Component List window | | This will open Save Net and Component List window | ||
|- | |- | ||
| − | | 05 | + | | 05:54 |
|I will resize this window for better view. | |I will resize this window for better view. | ||
|- | |- | ||
| − | | 06 | + | | 06:00 |
|Click on Save to save this file. This will save the file and also close the Cvpcb window automatically. | |Click on Save to save this file. This will save the file and also close the Cvpcb window automatically. | ||
|- | |- | ||
| − | | 06 | + | | 06:13 |
|Now the netlist is updated with footprints information. | |Now the netlist is updated with footprints information. | ||
|- | |- | ||
| − | | 06 | + | | 06:18 |
|Here the process of mapping the components is complete. | |Here the process of mapping the components is complete. | ||
|- | |- | ||
| − | | 06 | + | | 06:21 |
| Go to the EEschema window. Now close this window. | | Go to the EEschema window. Now close this window. | ||
|- | |- | ||
| − | | 06 | + | | 06:29 |
| Also close the KiCad main window. | | Also close the KiCad main window. | ||
|- | |- | ||
| − | | 06 | + | | 06:35 |
|This brings us to the end of this tutorial. | |This brings us to the end of this tutorial. | ||
|- | |- | ||
| − | | 06 | + | | 06:38 |
|In this tutorial we learnt, | |In this tutorial we learnt, | ||
|- | |- | ||
| − | | 06 | + | | 06:40 |
|To map the components with corresponding footprints using Cvpcb window | |To map the components with corresponding footprints using Cvpcb window | ||
|- | |- | ||
| − | | 06 | + | | 06:47 |
| Watch the video available at the following link | | Watch the video available at the following link | ||
|- | |- | ||
| − | | 06 | + | | 06:51 |
|It summarises the Spoken Tutorial project | |It summarises the Spoken Tutorial project | ||
|- | |- | ||
| − | | 06 | + | | 06:56 |
| If you do not have good bandwidth, you can download and watch it | | If you do not have good bandwidth, you can download and watch it | ||
|- | |- | ||
| − | | 07 | + | | 07:02 |
| The Spoken Tutorial Project Team | | The Spoken Tutorial Project Team | ||
|- | |- | ||
| − | | 07 | + | | 07:04 |
|Conducts workshops using spoken tutorials | |Conducts workshops using spoken tutorials | ||
| Line 309: | Line 307: | ||
|- | |- | ||
| − | | 07 | + | | 07:07 |
|Gives certificates for those who pass an online test | |Gives certificates for those who pass an online test | ||
|- | |- | ||
| − | | 07 | + | | 07:11 |
|For more details, please write to contact at spoken hyphen tutorial dot org | |For more details, please write to contact at spoken hyphen tutorial dot org | ||
|- | |- | ||
| − | | 07 | + | | 07:19 |
|Spoken Tutorial Project is a part of the Talk to a Teacher project | |Spoken Tutorial Project is a part of the Talk to a Teacher project | ||
|- | |- | ||
| − | | 07 | + | | 07:23 |
|It is supported by the National Mission on Education through ICT, MHRD, Government of India | |It is supported by the National Mission on Education through ICT, MHRD, Government of India | ||
|- | |- | ||
| − | | 07 | + | | 07:29 |
|More information on this Mission is available at | |More information on this Mission is available at | ||
|- | |- | ||
| − | | 07 | + | | 07:32 |
|spoken hyphen tutorial dot org slash NMEICT hyphen Intro | |spoken hyphen tutorial dot org slash NMEICT hyphen Intro | ||
|- | |- | ||
| − | | 07 | + | | 07:38 |
|This script has been contributed by Abhishek Pawar | |This script has been contributed by Abhishek Pawar | ||
|- | |- | ||
| − | | 07 | + | | 07:41 |
|This is Rupak Rokade from IIT Bombay, signing off. Thanks for joining. | |This is Rupak Rokade from IIT Bombay, signing off. Thanks for joining. | ||
Revision as of 12:51, 9 July 2014
| Time | Narration
|
| 00:01 | Dear Friends, |
| 00:02 | Welcome to the spoken tutorial on Mapping components with footprints in KiCad |
| 00:07 | In this spoken tutorial, we will learn |
| 00:10 | To map components with corresponding footprints. |
| 00:13 | Basic knowledge of electronic circuit is pre-requisite for this tutorial. |
| 00:18 | User should know how to design circuit schematic in KiCad, |
| 00:23 | And do electric rule check and netlist generation. |
| 00:26 | For relevant tutorials, please visit spoken hyphen tutorial.org |
| 00:33 | We are using Ubuntu 12.04 as an operating system |
| 00:37 | With KiCad 2011 hyphen 05 hyphen 25 for this tutorial. |
| 00:47 | To start KiCad, |
| 00:49 | Go to the top left corner of Ubuntu desktop screen. |
| 00:52 | Click on the first icon (i.e.)the Dash home. |
| 00:56 | In the search bar type 'KiCad' and press Enter. |
| 01:04 | This will open KiCad main window. |
| 01:07 | To open EEschema, go to the top panel. Click on EEschema tab. |
| 01:17 | An info dialog box will appear which says that it cannot find the schematic.
|
| 01:21 | Click on OK. |
| 01:24 | I will use the circuit schematic of Astable multivibrator which was created earlier. |
| 01:30 | To do this, I will go to the File menu, click on Open. |
| 01:37 | I will bring this window in the visible area. |
| 01:44 | Choose the folder in which the file is saved. |
| 01:50 | and click on Open. |
| 01:55 | This will open the circuit schematic. |
| 01:57 | I will zoom in using the scroll button of the mouse |
| 02:02 | We have already generated the netlist for this circuit. |
| 02:07 | Let us now look at the process of mapping the components used in the schematic with footprints. |
| 02:14 | Footprint is the actual layout of the component which is placed in the Printed Circuit Board. |
| 02:21 | To start mapping of the components, |
| 02:24 | Go to the top panel of EEschema window. |
| 02:28 | Click on the Run Cvpcb button. |
| 02:33 | This will open the Cvpcb window. |
| 02:37 | It will also open a dialog box titled Component Library Error. |
| 02:42 | Click on OK button to close it. |
| 02:47 | Notice that it opens project1.net file. Please recall that we had generated this file in the netlist generation tutorial. |
| 02:58 | The Cvpcb window is divided into two panels. |
| 03:03 | The first column in the left panel is the serial number. |
| 03:07 | The second column shows reference id for list of components used in schematic. |
| 03:14 | The third column shows values of the corresponding components. |
| 03:19 | The right panel gives a list of footprints available. |
| 03:25 | Now we will map the components with their associated footprints. |
| 03:30 | We can see list of footprints available for selected component (i.e) C1 in the right part of Cvpcb window. |
| 03:41 | We will now view footprint corresponding to the selected component. |
| 03:45 | On the top panel of Cvpcb window click on View selected footprint |
| 03:53 | This will open footprint window which displays the image of footprint selected. |
| 04:02 | We can also see images of different footprints by clicking on them |
| 04:12 | I will close footprint window now. |
| 04:15 | For the first component C1, we will choose the footprint C1 from right panel. |
| 04:22 | To assign C1 footprint to first component, double click on the footprint. |
| 04:27 | As you can see, C1 footprint gets assigned to the first component in the list. |
| 04:34 | Similarly for second component C2 also we will choose footprint C1 by double clicking on it. |
| 04:43 | For the next component D1 we choose LED hyphen 3MM. |
| 04:50 | For connector P1 we choose SIL hyphen 2 from the right panel. |
| 05:02 | I will scroll down in the right panel to select it. |
| 05:09 | For R1 we choose R3. |
| 05:13 | For R2 we choose R3. |
| 05:17 | For R3 we choose R3. |
| 05:22 | For U1 i.e. LM555 we choose DIP hyphen 8 underscore 300 underscore ELL which is a standard eight pin IC footprint. |
| 05:38 | Now we will save the netlist by clicking on Save netlist and footprint files button on the top panel of Cvpcb window.
|
| 05:48 | This will open Save Net and Component List window |
| 05:54 | I will resize this window for better view.
|
| 06:00 | Click on Save to save this file. This will save the file and also close the Cvpcb window automatically. |
| 06:13 | Now the netlist is updated with footprints information. |
| 06:18 | Here the process of mapping the components is complete. |
| 06:21 | Go to the EEschema window. Now close this window. |
| 06:29 | Also close the KiCad main window. |
| 06:35 | This brings us to the end of this tutorial. |
| 06:38 | In this tutorial we learnt, |
| 06:40 | To map the components with corresponding footprints using Cvpcb window
|
| 06:47 | Watch the video available at the following link |
| 06:51 | It summarises the Spoken Tutorial project |
| 06:56 | If you do not have good bandwidth, you can download and watch it |
| 07:02 | The Spoken Tutorial Project Team |
| 07:04 | Conducts workshops using spoken tutorials
|
| 07:07 | Gives certificates for those who pass an online test |
| 07:11 | For more details, please write to contact at spoken hyphen tutorial dot org |
| 07:19 | Spoken Tutorial Project is a part of the Talk to a Teacher project |
| 07:23 | It is supported by the National Mission on Education through ICT, MHRD, Government of India |
| 07:29 | More information on this Mission is available at |
| 07:32 | spoken hyphen tutorial dot org slash NMEICT hyphen Intro |
| 07:38 | This script has been contributed by Abhishek Pawar |
| 07:41 | This is Rupak Rokade from IIT Bombay, signing off. Thanks for joining. |
