Difference between revisions of "GCompris/C2/Identify-Colours/English"
(Created page with " {|border=1 |- || '''Visual Cue''' || '''Narration''' |- ||'''Slide Number 1''' '''Title slide''' || Welcome to the spoken tutorial on '''Identify Colours'''. |- || '''Slid...") |
|||
| Line 15: | Line 15: | ||
'''Learning Objectives''' | '''Learning Objectives''' | ||
| − | || In this tutorial we will learn activities to, | + | || In this tutorial, we will learn activities to, |
* Recognize common colours | * Recognize common colours | ||
| Line 55: | Line 55: | ||
|- | |- | ||
|| Cursor on the interface. | || Cursor on the interface. | ||
| − | || In this tutorial we will demonstrate the activities about colours. | + | || In this tutorial, we will demonstrate the activities about colours. |
|- | |- | ||
|| Click on the cow with an ABC icon. | || Click on the cow with an ABC icon. | ||
| Line 127: | Line 127: | ||
Point to the instruction at the top of the screen. | Point to the instruction at the top of the screen. | ||
| − | || On the screen we can see the dancing butterflies of different | + | || On the screen, we can see the dancing butterflies of different colours. |
Message at the top indicates to find the '''claret''' butterfly. | Message at the top indicates to find the '''claret''' butterfly. | ||
| Line 294: | Line 294: | ||
The activity opens. | The activity opens. | ||
| − | This activity deals with mixing primary | + | This activity deals with mixing primary colours of light. |
|- | |- | ||
|| Click on the''' help''' icon. | || Click on the''' help''' icon. | ||
| Line 345: | Line 345: | ||
|| Click on the '''plus''' button of the Red torch and blue torch. | || Click on the '''plus''' button of the Red torch and blue torch. | ||
| − | We observe that the resultant | + | We observe that the resultant colour is not yellow but pink. |
|- | |- | ||
|| Click on the '''minus''' button on the blue torch. | || Click on the '''minus''' button on the blue torch. | ||
| − | Click on the plus button of the green torch. | + | Click on the '''plus''' button of the green torch. |
Point to the yellow colour. | Point to the yellow colour. | ||
| Line 413: | Line 413: | ||
|| Cursor on the interface. | || Cursor on the interface. | ||
| − | Click on the tool box icon available at the bottom of the screen. | + | Click on the '''tool box''' icon available at the bottom of the screen. |
Point to the '''Configuration''' page. | Point to the '''Configuration''' page. | ||
|| Let’s modify a few settings using the '''configuration''' tool. | || Let’s modify a few settings using the '''configuration''' tool. | ||
| − | Click on the tool box icon available at the bottom of the screen. | + | Click on the '''tool box''' icon available at the bottom of the screen. |
A '''Configuration''' page opens. | A '''Configuration''' page opens. | ||
| Line 535: | Line 535: | ||
|| The '''Spoken Tutorial Project''' team: | || The '''Spoken Tutorial Project''' team: | ||
| − | conducts workshops | + | conducts workshops and gives certificates. For more details, please write to us. |
|- | |- | ||
|| '''Slide Number 11''' | || '''Slide Number 11''' | ||
Revision as of 17:35, 17 July 2020
| Visual Cue | Narration |
| Slide Number 1
Title slide |
Welcome to the spoken tutorial on Identify Colours. |
| Slide Number 2
Learning Objectives |
In this tutorial, we will learn activities to,
|
| Slide Number 3
Learning Objectives |
|
| Slide Number 4
System Requirements |
To record this tutorial, I am using,
Ubuntu Linux OS v 18.04 GCompris v 0.97 |
| Slide Number 5
Pre-requisites |
To follow this tutorial, Learner must be familiar with,
For the prerequisite tutorials please visit this website. |
| Cursor on the GCompris interface. | Here, I have opened the GCompris interface. |
| Cursor on the interface. | In this tutorial, we will demonstrate the activities about colours. |
| Click on the cow with an ABC icon. | Click on the cow with an ABC icon. |
| Point to the Letters, Words and Vocabulary tab.
Click on the Vocabulary tab. Click on the Colors activity. |
This section has three tabs: Letters, Words and Vocabulary.
Click on the Vocabulary tab. Click on the Colors activity. |
| Cursor on the interface. | The activity page opens. |
| Point to the ducks.
Point to the ducks. Cursor on the interface. |
We can see the dancing ducks of different colours on the screen.
The colours may be different in your case. We heard a voice to click on the red colour duck. |
| Point to the instruction.
Place the cursor on the red colour duck >> click on it. |
Instruction to click on the red duck is also given at the top of the screen.
Place the cursor on the red colour duck and click on it. |
| Cursor on the interface.
Point to the lips symbol. Click on the lips symbol. Click on the yellow colour duck. |
Now we heard a voice to click on the yellow colour duck.
The lips symbol is available at the bottom right corner of the screen. Click on the lips symbol to listen to the colour again. Then click on the yellow colour duck. |
| Click on the ducks according to their colour. | Similarly, listen to the colour and click on the matching ducks. |
| Click on the back and forth arrow icon. | To know more, explore the other levels in this activity. |
| Click on the home icon. | Click on the home icon to quit the activity. |
| Scroll down >> click on Advanced colors activity. | Scroll down and click on Advanced colors activity. |
| Cursor on the interface. | The activity opens. |
| Point to the dancing butterflies.
Point to the instruction at the top of the screen. Point to the instruction at the top of the screen. |
On the screen, we can see the dancing butterflies of different colours.
Message at the top indicates to find the claret butterfly. The colour indicated may be different in your case. |
| Place the cursor over the claret butterfly >> click on it. | Find the claret butterfly and click on it. |
| Point to the instruction at the top of the screen. | Then the next instruction to find the coral butterfly is displayed. |
| Click on the butterflies according to their correct colour. | Likewise read the instruction and click on the butterfly of the correct colour. |
| Click on the back and forth arrow icon. | There are more levels to explore in this activity. |
| Click on the home icon. | Click on the home icon to quit the activity. |
| Cursor on the interface.
Cursor on the interface. |
Now we are familiar with colours.
We will learn how to mix the colours to create new colours. |
| Click on the piggy icon.
Point to the Experiment tab. Scroll down >> click on the Mixing color of paint activity. |
Let’s click on the piggy icon.
Experiment tab opens by default. Scroll down and click on the Mixing color of paint activity. |
| Cursor on the interface. | The activity opens. |
| Cursor on the interface. | This activity deals with mixing of primary colours of paint to create a new colour. |
| Click on the help icon.
Cursor on the page. Scroll down the page. Show the information available on the page. Click on the red cross icon at the top right corner. |
Click on the help icon.
A page opens. Read the information given here. It elaborately explains to you how to do this activity. Close the page. |
| Point to the magenta, yellow and cyan colour tubes.
Point to the plus and minus buttons on each tube. Click on the Plus button of the magenta tube. Click on the Minus button of the magenta tube. |
We can see the three colour tubes namely magenta, yellow and cyan.
On each tube, plus and minus buttons are indicated. Plus button is used to add the colour. Minus button is used to remove the colour. |
| Point to the message and the colour given at the top of the screen.
Point to the colour. |
Look at the message and the colour given at the top of the screen.
The colour may be different in your case. |
| Point to the black colour and three tubes. | Here it indicates to create black colour using the colours given in 3 tubes. |
| Point to the black colour. | Let's try creating black colour. |
| Click on the plus button of the magenta tube.
Point to the magenta colour added in the circle. |
Click on the plus button of the magenta tube.
Note that now the magenta colour is added in the circle. |
| Next click on the plus button of the yellow tube.
Point to the red colour. Then click on plus button of the cyan tube. |
Next click on the plus button of the yellow tube.
Now the colour becomes red. Then click on the plus button of the cyan tube. |
| Point to the black circle and the black colour at the top of the screen.
Click on the OK button. |
Now compare this colour with the given colour.
It matches with the given colour. Once it is done, click on the OK button on the right side of the screen. |
| Point to the new colour at the top of the screen.
Point to the green colour. Click on the OK button. |
Then the next colour loads on the top of the screen.
It is a green colour. If we don't know how to create green colour then click on the OK button. |
| Point to the message at the top of the screen.
Point to the message. Click on the plus button of the yellow and cyan tube. Click on the OK button. |
The message will display at the top of the screen.
It gives an idea about the colours that are required to create green colour. Accordingly, add the colours. Once matched with the given colour, then click on the OK button. |
| Cursor on the interface.
Click on the back and forth arrow icon. |
Likewise add the primary colours in definite proportions to create given colour.
Explore the other levels in this activity to learn new colour combinations. |
| Click on the home icon. | Click on the home icon to quit the activity. |
| Click on the Mixing colors of light activity.
Cursor on the interface. Text on the screen. |
Click on the Mixing colors of light activity.
The activity opens. This activity deals with mixing primary colours of light. |
| Click on the help icon.
Scroll down the page and show the information about colours. Click on the red cross icon at the top right corner. |
Click on the help icon.
Read the information given here. Close the page. |
| Point to the red, green and blue colour torches.
Point to the red, green and blue colour torches. |
On the screen we can see red, green and blue coloured torches.
These colours are the primary colours of the light. These primary colours are different from that of the paint activity. |
| Cursor on the interface.
Click on the plus button of red, green and blue torches. Click on the minus button of the red, green and blue torches. |
This activity is just the opposite of mixing colour with paints.
Here if we add more light, the resultant colour will be lighter in shade. Click on the minus button of the red, green and blue torches to remove the light. |
| Point to the colour given at the top of the screen.
Point to the yellow colour. Cursor on the interface. |
Look at the colour given at the top of the screen.
Here yellow colour is shown. Let’s try creating yellow colour light. |
| Click on the plus button of the Red torch and yellow torch.
Point to the pink colour. |
Click on the plus button of the Red torch and blue torch.
We observe that the resultant colour is not yellow but pink. |
| Click on the minus button on the blue torch.
Click on the plus button of the green torch. Point to the yellow colour. |
Now click on the minus button on the blue torch to remove blue colour.
Let us try adding green colour to red colour. Now, this resultant colour is yellow. |
| Click on the OK button on the right side of the screen.
Point to the new colour displayed at the top of the screen. Cursor on the interface. |
Click on the OK button on the right side of the screen.
Next colour loads on the top of the screen. Likewise, mix the appropriate coloured light to match with the given colour. |
| Click on the back and forth arrow icon.
Click on the home icon. |
Explore the other levels in this activity for more interesting learning.
Click on the home icon to quit the activity. |
| Click on the tux icon.
Point to the three tabs. Point to the Logic tab. Click on the Graph Coloring activity. |
Let’s click on the tux icon on the main menu bar.
This section has three tabs. By default, the Logic tab opens. Click on the Graph Coloring activity. |
| Point to the graph.
Point to the white coloured circles. Point to the node. Show the coloured shapes. |
The activity opens with a graph.
We can see the white coloured circles at the intersection of the graph. These are the nodes of the graph. On the left side of the graph, coloured shapes are available. |
| Point to the adjacent nodes. | We have to colour the graph so that no two adjacent nodes have the same colour. |
| Cursor on the interface.
Click on the tool box icon available at the bottom of the screen. Point to the Configuration page. |
Let’s modify a few settings using the configuration tool.
Click on the tool box icon available at the bottom of the screen. A Configuration page opens. |
| Point to the Select your mode option.
Click on the button. Point to the two options. Click on the Colors option from the list. Click on the red cross icon at the top right corner. |
Here we have Select your mode option.
Click on the button. Two options are displayed here. I will select Colors option from the list. Close the Configuration page. |
| Point to the colours on the left side of the screen. | Now the colours are displayed instead of shapes on the left side of the graph. |
| Click on the first node.
Point to the four options. Click on the blue colour. Point to the first node. |
Let’s click on the first node.
Four options of the colours are displayed. I will click on the blue colour. Observe that the first node becomes blue. |
| Click on the second node.
Click on the blue colour >> Point to the red line. Point to the two adjacent nodes. |
Then click on the second node.
If we select the same colour the line joining the two nodes turns red. It indicates that they are adjacent nodes. |
| Click on the second node.
Click on the green colour from the given options. |
Click on the second node again.
This time I will select the green colour from the given options. |
| Click on the remaining nodes and select the appropriate colour. | Similarly, check the nodes if they are adjacent and colour the nodes. |
| Click on the back and forth arrow icons.
Click on the back and forth arrow icons. Click on the home icon to quit the activity. |
At higher levels, we can see the complicated graphs.
Explore these levels if desired. Click on the home icon to quit the activity. |
| Slide Number 6
Summary |
Let us summarize. |
| Slide Number 6
Summary |
In this tutorial we have learnt to,
|
| Slide Number 7
Summary |
|
| Slide Number 8
Assignment |
As an assignment,
Explore A simple drawing activity available in the Fun game section (Dino with the ball icon) |
| Slide Number 9
About Spoken Tutorial project |
The video at the following link summarizes the Spoken Tutorial project
Please download and watch it |
| Slide Number 10
Spoken Tutorial workshops |
The Spoken Tutorial Project team:
conducts workshops and gives certificates. For more details, please write to us. |
| Slide Number 11
Forum for specific questions: Do you have questions in THIS Spoken Tutorial?
|
Please post your timed queries in this forum. |
| Slide Number 12
Acknowledgement |
Spoken Tutorial Project is funded by MHRD, Government of India. |
| This is Meenal Ghoderao from IIT Bombay.
Thank you for joining. |
