Difference between revisions of "OpenFOAM/C3/Flow-over-a-flat-plate/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
Line 34: Line 34:
  
 
|-
 
|-
−
|  Slide:
+
|  Slide 4:
  
 
System Requirement
 
System Requirement
−
| The tutorials were recorded using the versions specified in previous slide  
+
* The tutorials were recorded using the versions specified in previous slide  
  
−
Subsequently the tutorials were edited to latest versions
+
* Subsequently the tutorials were edited to latest versions
  
−
To install latest system requirements go to Installation Sheet
+
* To install latest system requirements go to Installation Sheet
  
  
 
|-
 
|-
−
| Slide 4:  
+
| Slide 5: Flow over Flat Plate
  
 
|'''Flow over flat plate''' is a '''fundamental problem in fluid mechanics'''
 
|'''Flow over flat plate''' is a '''fundamental problem in fluid mechanics'''
  
 
|-
 
|-
−
| Slide 5:
+
| Slide 6: Flow over Flat Plate
  
 
Flow over a flat plate diagram
 
Flow over a flat plate diagram
Line 60: Line 60:
  
 
|-
 
|-
−
| Slide 6: Diagram of boundary conditions.
+
| Slide 7: Diagram of boundary conditions.
 
| This is a '''diagram''' of '''flow over the flat plate'''
 
| This is a '''diagram''' of '''flow over the flat plate'''
  
Line 69: Line 69:
 
*'''Top''' – which is the '''Farfield'''
 
*'''Top''' – which is the '''Farfield'''
 
*and '''Outlet''' – which is the''' pressure outlet boundary'''
 
*and '''Outlet''' – which is the''' pressure outlet boundary'''
 +
|-
 +
| Slide 8: Inlet parameters
 +
|
 +
* The Free stream velocity '''U = 1 m/s''', and
  
−
The Free stream velocity '''U = 1 m/s''', and
+
* we are solving this for '''Reynolds no (Re) = 100'''
−
 
+
−
we are solving this for '''Reynolds no (Re) = 100'''
+
  
 
|-
 
|-
 
| Click on home>> OpenFoam >> Run >> Tutorials >> Incompressible >> SimpleFoam
 
| Click on home>> OpenFoam >> Run >> Tutorials >> Incompressible >> SimpleFoam
−
|Now let us Go to the '''home''' folder and click on the '''OpenFoam''' folder
+
|Now let us Go to the '''Home''' folder, In the '''Home''' folder, click on the '''OpenFoam''' folder
  
 
Then go to the '''Run''' '''directory '''
 
Then go to the '''Run''' '''directory '''
Line 197: Line 199:
 
|-
 
|-
 
| Type ls  
 
| Type ls  
−
| Now type '''ls'''   press '''Enter.'''
+
| Now type '''ls''' and press '''Enter.'''
  
 
|-
 
|-
Line 253: Line 255:
  
 
|-
 
|-
−
| Slide 6 : solver
+
| Slide 9: solver
 
| The solver we are using here is: '''simpleFoam.'''
 
| The solver we are using here is: '''simpleFoam.'''
  
Line 285: Line 287:
 
|-
 
|-
 
| Change the drop down menu from Solid Color to U
 
| Change the drop down menu from Solid Color to U
−
| To view the '''contours''' from the''' '''top drop down menu,  
+
| To view the '''contours''' from the''' '''drop down menu,  
  
 
in the '''Active Variable Control '''menu,
 
in the '''Active Variable Control '''menu,
Line 394: Line 396:
  
 
|-
 
|-
−
| Slide 9
+
| Slide 10: Summary
−
 
+
−
Summary
+
 
| This brings us to the end of the tutorial.  
 
| This brings us to the end of the tutorial.  
  
Line 405: Line 405:
  
 
|-
 
|-
−
| Slide 10:
+
| Slide 11: Assignment
−
 
+
−
Assignment
+
 
| As an Assignment,  
 
| As an Assignment,  
  
Line 415: Line 413:
  
 
|-
 
|-
−
| Slide 11 :
+
| Slide 12 : About Spoken tutorials
−
 
+
| * Watch the video available at this URL:
−
About Spoken tutorials
+
−
| Watch the video available at this URL:
+
  
 
http://spoken-tutorial.org/What_is_a_Spoken_Tutorial  
 
http://spoken-tutorial.org/What_is_a_Spoken_Tutorial  
  
−
It summarizes the Spoken Tutorial project.  
+
* It summarizes the Spoken Tutorial project.  
  
−
If you do not have good bandwidth, you can download and watch it.  
+
* If you do not have good bandwidth, you can download and watch it.  
  
 
|-
 
|-
−
| Slide 12:  
+
| Slide 13: Spoken Tutorial Worekshops
−
 
+
−
About Spoken tutorials
+
 
| The Spoken Tutorial Project Team  
 
| The Spoken Tutorial Project Team  
  
Line 441: Line 435:
  
 
|-
 
|-
−
| Slide:  
+
| Slide 14: Forum to answer questions
−
 
+
* Do you have questions on THIS Spoken Tutorial?
−
Forum to answer questions
+
* Choose the minute and second where you have the question
−
|  Do you have questions on THIS Spoken Tutorial?
+
* Explain your question briefly
−
Choose the minute and second where you have the question
+
* Someone from the FOSSEE team will answer them. Please visit
−
Explain your question briefly
+
−
Someone from the FOSSEE team will answer them. Please visit
+
 
http://forums.spoken-tutorial.org/
 
http://forums.spoken-tutorial.org/
  
 
|-
 
|-
−
| Slide:  
+
| Slide 15: Forum to answer questions
−
 
+
* Questions not related to the Spoken Tutorial?
−
Forum to answer questions
+
* Do you have general/technical questions on the Software?
−
| Questions not related to the Spoken Tutorial?
+
* Please visit the FOSSEE forum
−
Do you have general/technical questions on the Software?
+
−
Please visit the FOSSEE forum
+
 
http://forums.fossee.in/
 
http://forums.fossee.in/
−
Choose the Software and post your question
+
* Choose the Software and post your question
  
  
 
|-
 
|-
−
| Slide:  
+
| Slide 16: Lab Migration Project
−
 
+
* We coordinate migration from commercial CFD software like ANSYS to OpenFOAM
−
Lab Migration Project
+
* We conduct free Workshops and provide solutions to CFD Problem Statements in OpenFOAM
−
| We coordinate migration from commercial CFD software like ANSYS to OpenFOAM
+
−
We conduct free Workshops and provide solutions to CFD Problem Statements in OpenFOAM
+
 
For more details visit this site:
 
For more details visit this site:
 
http://cfd.fossee.in/
 
http://cfd.fossee.in/
Line 472: Line 460:
  
 
|-
 
|-
−
| Slide:  
+
| Slide 17: Case Study Project
−
 
+
* We invite students to solve a feasible CFD problem statement of reasonable complexity using OpenFOAM
−
Case Study Project
+
* We give honorarium and certificate to those who do this
−
| We invite students to solve a feasible CFD problem statement of reasonable complexity using OpenFOAM
+
−
We give honorarium and certificate to those who do this
+
 
For more details visit this site:
 
For more details visit this site:
 
http://cfd.fossee.in/
 
http://cfd.fossee.in/
  
 
|-
 
|-
−
| Slide 13:
+
| Slide 18:
  
 
Acknowledgement
 
Acknowledgement

Revision as of 15:05, 29 May 2019

Tutorial: Flow over a flat plate using OpenFOAM.

Script and Narration: Rahul Joshi

Keywords: Video tutorial, CFD, Flat plate, Boundary layer, glyph (vector plotting).

Visual Cue Narration
Slide 1 Hello and welcome to the spoken tutorial on Flow over a flat plate using OpenFOAM.
Slide 2 : Learning Objectives In this tutorial I will teach you about
  • Geometry of the flat plate
  • Changing the grid spacing in meshing
  • Post Processing results in ParaView and
  • Visualizing using Vector Plot.
Slide 3:

System Requirement

To record this tutorial

I am using

  • Linux Operating system Ubuntu version 12.04.
  • OpenFOAM version 2.1.1 and
  • ParaView version 3.12.0
Slide 4:

System Requirement

  • The tutorials were recorded using the versions specified in previous slide
  • Subsequently the tutorials were edited to latest versions
  • To install latest system requirements go to Installation Sheet


Slide 5: Flow over Flat Plate Flow over flat plate is a fundamental problem in fluid mechanics
Slide 6: Flow over Flat Plate

Flow over a flat plate diagram

We can visualise the growth of boundary layer

Boundary layer is a very thin region above the body

where the velocity is 0.99 times the free stream velocity.

Slide 7: Diagram of boundary conditions. This is a diagram of flow over the flat plate

The boundary conditions are given as follows

  • You have the Inlet
  • the Plate
  • Top – which is the Farfield
  • and Outlet – which is the pressure outlet boundary
Slide 8: Inlet parameters
  • The Free stream velocity U = 1 m/s, and
  • we are solving this for Reynolds no (Re) = 100
Click on home>> OpenFoam >> Run >> Tutorials >> Incompressible >> SimpleFoam Now let us Go to the Home folder, In the Home folder, click on the OpenFoam folder

Then go to the Run directory

You will see Tutorials. Click on it.

Scroll down and then click on Incompressible.

Scroll down.

You will see the simpleFoam folder.

Click on it

This solver suits our case.

Right click >> Create new folder >> flatplate In this, create a folder by the name flatplate.

Right click - Create New Folder - flatplate

Double-click pitzdaily folder Now, let's open the pitzdaily case.
Zoom in Let me zoom this.
Select 0, constant and system folders Copy the three folders - 0, constant and system
Copy them Copy this
Go back to SimpleFoam >> flatplate folder

Paste them there

Now let us go one level back.

Paste these three folders inside the flatplate folder.

Click on constant >> polyMesh Open the constant folder and then the polyMesh folder
Change the geometry and boundary condition names in the blockMeshDict file.
I have already made the changes.

Let us open the blockMeshDict file . Scroll down

The geometry is in meters.

We have set the dimensions of the flatplate
Simplegrading (1 3 1) We can see that simpleGrading.

It is kept as (1 3 1) as we need a finer mesh near the plate.

Now close this.

Go two levels back.

Similarly, make changes in the boundary condition names inside the files in the 0 folder.

These files have pressure, velocity and wall functions.

To calculate the values of wall functions,


please refer to the earlier tutorials in the OpenFoam series.

Let us go one level back.

The system folder can be kept default

Let us close this

Let us Open the terminal window :

Press Ctrl+Alt+t keys simultaneously

Now let us open the terminal window.

In the terminal window, type run and press Enter.

Type cd tutorials Type cd space tutorials press' Enter.
Type cd incompressible Type cd incompressible press Enter.
Type cd simpleFoam Type cd space simpleFoam press Enter.
Type ls Now type ls and press Enter.
We can see the flatplate folder.
Type cd flatplate Now type cd space flatplate and press Enter.
Type ls Now type ls and press Enter.
You can see the three folders 0,constant and system.
Type blockMesh Now, we will mesh the geometry.

We are using a course mesh for this problem.

Meshing can be done by typing blockMesh in the terminal.

Press Enter.

Meshing has been done.

Note that if there is some error in the blockMesh file,

it will be shown in the terminal window.

Type paraFoam To view the geometry, type “paraFoam” 
press Enter.
Paraview window click on APPLY button on left hand side After the ParaView window opens, on the left hand side of the object inspector menu, click Apply.

We can see the geometry.

Close the ParaView window.

Let me switch back to the slides.

Slide 9: solver The solver we are using here is: simpleFoam.

SimpleFoam is a steady state solver for incompressible

and turbulent flows

Demo :

type simpleFoam

Let me switch back to the terminal window.

In the terminal window ,type simpleFoam and press Enter.


You will see the iterations running in the terminal window.

Type paraFoam Once the solving is done, type paraFoam to view the results.
In the Paraview window click on APPLY button on left hand side On the left hand side of the Object Inspector menu, click Apply to view the geometry.
Properties Scroll down the properties panel of the Object Inspector menu for time step, regions and fields
Change the drop down menu from Solid Color to U To view the contours from the drop down menu,

in the Active Variable Control menu,

change from solid color to capital U

You can see the initial condition of the velocity
VCR control Now on top of the ParaView window, you will see the VCR controls.
Click on Play button of VCR control Click on the Play button.
You will see the contour of Pressure or Velocity on the flat plate accordingly
Toggle on the Color legend This is the velocity contour

Toggle on the Color legend

Color legend left hand side top icon To do this, click on the color legend icon on the Active Variable Control menu
Click on APPLY button Click Apply in the Object inspector menu
Click on Display In the Object inspector menu, click on Display
Click on rescale to data range Scroll down and click on Rescale to data range
Shift color legend on top of the geometry Let me shift this Color legend on top
Top menu >> Filter > Common > glyph To visualize the Vector Plot,

go to the Filters Menu > Common > glyph

Go to the Properties in Object Inspector menu
Click Apply on the left hand side of Object Inspector Menu.
Changing vector size You can change the number of vectors by changing their size at the bottom.
Scroll down and click on edit button

set scale factor 0.1

Also, the size of the vectors can be changed by clicking on the Edit button.

The set scale factor can be changed to 0.1

Click the apply button Again, click the Apply button.
Now let me zoom this
Click on ZoomToBox icon To do this, in the Active Variable Control menu, click on zoomToBox option
And zoom over any area that you desire
Parabolic variation of vector plot We can see the parabolic variation of vector plot as the flow moves over the plate.
Delete the vector plot Delete this. Now delete the vector plot.
Corresponding to color of 1 in color legend Also, we can see that the color near to 1

corresponds to the velocity of 0.99 times the free stream velocity.

To plot the data along x and y axis You can also plot the variation of velocity along the x and y axes using the plot data over line.
Slide 10: Summary This brings us to the end of the tutorial.

In this tutorial we learnt :

  • Geometry and meshing of the flat plate geometry and
  • Vector plotting in ParaView
Slide 11: Assignment As an Assignment,

Create a geometry of flow over a flat plate

Refine the grid spacing near the plate

Slide 12 : About Spoken tutorials * Watch the video available at this URL:

http://spoken-tutorial.org/What_is_a_Spoken_Tutorial

  • It summarizes the Spoken Tutorial project.
  • If you do not have good bandwidth, you can download and watch it.
Slide 13: Spoken Tutorial Worekshops The Spoken Tutorial Project Team

-Conducts workshops using spoken tutorials

-Gives certificates to those who pass an online test

-For more details, please write to

contact@spoken-tutorial.org

Slide 14: Forum to answer questions
  • Do you have questions on THIS Spoken Tutorial?
  • Choose the minute and second where you have the question
  • Explain your question briefly
  • Someone from the FOSSEE team will answer them. Please visit

http://forums.spoken-tutorial.org/

Slide 15: Forum to answer questions
  • Questions not related to the Spoken Tutorial?
  • Do you have general/technical questions on the Software?
  • Please visit the FOSSEE forum

http://forums.fossee.in/

  • Choose the Software and post your question


Slide 16: Lab Migration Project
  • We coordinate migration from commercial CFD software like ANSYS to OpenFOAM
  • We conduct free Workshops and provide solutions to CFD Problem Statements in OpenFOAM

For more details visit this site: http://cfd.fossee.in/


Slide 17: Case Study Project
  • We invite students to solve a feasible CFD problem statement of reasonable complexity using OpenFOAM
  • We give honorarium and certificate to those who do this

For more details visit this site: http://cfd.fossee.in/

Slide 18:

Acknowledgement


Spoken Tutorial project is a part of the Talk to a Teacher project,

It is supported by the National Mission on Education through ICT, MHRD, Government of India.

More information on this mission is available at this URL http://spoken-tutorial.org/NMEICT-Intro

About the contributor This is Rahul Joshi from IIT BOMBAY signing off.

Thanks for joining.

Contributors and Content Editors

DeepaVedartham, Nancyvarkey, Rahuljoshi, Sneha

Retrieved from "https://script.spoken-tutorial.org/index.php?title=OpenFOAM/C3/Flow-over-a-flat-plate/English&oldid=47577"