Difference between revisions of "DWSIM/C2/Calculation-of-Bubble-Points-and-Dew-Points/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
Line 95: Line 95:
  
  
−
1) '''Bubble Point Temperature at 2 bar'''
+
1) '''Bubble Point Temperature''' at '''2 bar'''
  
−
2) '''Dew Point Temperature at 10 bar'''
+
2) '''Dew Point Temperature''' at '''10 bar'''
  
  
Line 168: Line 168:
 
|-
 
|-
 
||Click on '''Next '''button.
 
||Click on '''Next '''button.
−
||Then click on the '''Next '''button'''.'''
+
||Then click on the '''Next '''button.
  
 
|-
 
|-
Line 180: Line 180:
 
|-
 
|-
 
||Click '''Next '''button.
 
||Click '''Next '''button.
−
||Click on the '''Next '''button at the bottom'''.'''
+
||Click on the '''Next '''button at the bottom.
  
 
|-
 
|-
Line 192: Line 192:
 
|-
 
|-
 
||Click on '''Finish '''button.
 
||Click on '''Finish '''button.
−
||At the bottom, click on the '''Finish '''button'''.'''
+
||At the bottom, click on the '''Finish '''button.
  
 
|-
 
|-
 
||Click on '''Maximize''' button.
 
||Click on '''Maximize''' button.
−
||Let us maximize the simulation window for better visibility.
+
||Let us maximize the '''simulation window '''for better visibility.
  
 
|-
 
|-
Line 204: Line 204:
 
|-
 
|-
 
||Point to '''Flowsheet Objects.'''
 
||Point to '''Flowsheet Objects.'''
−
||On the right hand side of the main simulation window, go to '''Flowsheet Objects.'''
+
||On the right hand side of the main '''simulation window,''' go to '''Flowsheet Objects.'''
  
 
|-
 
|-
Line 216: Line 216:
 
|-
 
|-
 
||Click on '''MSTR-000'''
 
||Click on '''MSTR-000'''
−
||Click on the '''Material Stream '''“'''MSTR-000” '''to view its properties.
+
||Click on the '''Material Stream “MSTR-000” '''to view its properties.
  
 
|-
 
|-
Line 252: Line 252:
 
|-
 
|-
 
||'''Composition >>Basis >>Mole Fractions'''
 
||'''Composition >>Basis >>Mole Fractions'''
−
||Under '''Composition''', choose the '''Basis '''as '''Mole Fractions, '''if not already selected'''.'''
+
||Under '''Composition''', choose the '''Basis '''as '''Mole Fractions, '''if not already selected.
  
 
By default, '''Mole Fractions '''is selected as '''Basis.'''
 
By default, '''Mole Fractions '''is selected as '''Basis.'''
Line 330: Line 330:
 
|-
 
|-
 
|| '''Settings >> Bubble Points'''
 
|| '''Settings >> Bubble Points'''
−
|| Under '''Settings''', Click on '''Bubble Points''' Tab.
+
|| Under '''Settings''', Click on '''Bubble Points''' tab.
  
 
|-
 
|-
Line 338: Line 338:
 
|-
 
|-
 
|| '''Initial Flash >> PVF'''
 
|| '''Initial Flash >> PVF'''
−
|| We are going to calculate bubble point temperature against given pressure.
+
|| We are going to calculate '''bubble point temperature''' against given pressure.
  
 
So, let '''Initial Flash''' method be '''PVF.'''
 
So, let '''Initial Flash''' method be '''PVF.'''
Line 354: Line 354:
 
|-
 
|-
 
||  
 
||  
−
|| We will not change any temperature value as we are doing a '''PVF Flash'''.
+
|| We will not change any '''temperature value''' as we are doing a '''PVF Flash'''.
  
 
|-
 
|-
Line 370: Line 370:
 
|-
 
|-
 
|| '''Initial Flash >> PVF'''
 
|| '''Initial Flash >> PVF'''
−
|| We are going to calculate dew point temperature against given pressure.
+
|| We are going to calculate '''dew point temperature''' against given pressure.
  
 
So, here also, let '''Initial Flash''' method be '''PVF.'''
 
So, here also, let '''Initial Flash''' method be '''PVF.'''
Line 414: Line 414:
 
||Look for temperature in '''Tb''' column corresponding to '''2 bar.'''
 
||Look for temperature in '''Tb''' column corresponding to '''2 bar.'''
  
−
We can see the '''bubble point''' temperature to be '''minus 91.9274 degree C'''
+
We can see the '''bubble point temperature''' to be '''minus 91.9274 degree C'''
  
 
|-
 
|-
Line 434: Line 434:
 
||Look for temperature in '''Td''' column corresponding to '''10 bar.'''
 
||Look for temperature in '''Td''' column corresponding to '''10 bar.'''
  
−
We can see the '''dew point''' temperature to be '''87.396 degree C.'''
+
We can see the '''dew point temperature''' to be '''87.396 degree C.'''
  
 
|-
 
|-
Line 458: Line 458:
 
|-
 
|-
 
||'''Vapor Phase Mole Fraction''' >> '''0'''
 
||'''Vapor Phase Mole Fraction''' >> '''0'''
−
||And '''Pressure''' as 2''' bar''' and press Enter.
+
||And '''Pressure''' as 2''' bar''' and press '''Enter'''.
  
 
|-
 
|-
Line 466: Line 466:
 
||Now check the temperature which is '''minus 91.9274 degree C.'''
 
||Now check the temperature which is '''minus 91.9274 degree C.'''
  
−
This is the '''bubble point '''temperature at '''2 bar''' pressure.
+
This is the '''bubble point temperature''' at '''2 bar''' pressure.
  
 
It matches the value obtained earlier from '''Phase envelope'''.
 
It matches the value obtained earlier from '''Phase envelope'''.
Line 472: Line 472:
 
|-
 
|-
 
||
 
||
−
||Similarly, let’s check for '''Dew point''' temperature.
+
||Similarly, let’s check for '''Dew point temperature'''.
  
 
|-
 
|-
Line 480: Line 480:
 
|-
 
|-
 
||'''Pressure''' >> '''10 bar'''
 
||'''Pressure''' >> '''10 bar'''
−
||Type '''Vapor Phase Mole Fraction '''as '''1 ''' and press Enter.
+
||Type '''Vapor Phase Mole Fraction '''as '''1 ''' and press '''Enter'''.
  
 
|-
 
|-
 
||'''Vapor Phase Mole Fraction''' >> '''1'''
 
||'''Vapor Phase Mole Fraction''' >> '''1'''
−
||And '''Pressure''' as '''10 bar''' and press Enter.
+
||And '''Pressure''' as '''10 bar''' and press '''Enter'''.
  
 
|-
 
|-
Line 493: Line 493:
 
||Now check the temperature which is '''87.396 degree C.'''
 
||Now check the temperature which is '''87.396 degree C.'''
  
−
This is the '''dew point''' temperature at '''10 bar''' pressure.
+
This is the '''dew point temperature''' at '''10 bar''' pressure.
  
 
It matches the value obtained earlier from '''Phase envelope'''.
 
It matches the value obtained earlier from '''Phase envelope'''.
Line 542: Line 542:
  
  
−
Calculate the following for the given component system and inlet conditions:
+
Calculate the following for the given '''component system''' and '''inlet conditions''':
  
  
  
−
a) '''Calculate Bubble Point Pressure at 20 degree C'''
+
a) Calculate '''Bubble Point Pressure''' at '''20 degree C'''
  
−
b) '''Calculate Dew Point Pressure at 60 degree C'''
+
b) Calculate '''Dew Point Pressure''' at '''60 degree C'''
  
 
|-
 
|-

Revision as of 22:17, 16 August 2018


Visual Cue Narration
Slide Number 1

Title Slide

Welcome to this tutorial on Calculation of Bubble Points and Dew Points in DWSIM.
Slide Number 2

Learning Objective

In this tutorial, we will learn to generate:


  • Bubble Point Temperature at a given pressure
  • Dew Point Temperature at a given pressure
Slide Number 3

System Requirements

To record this tutorial, I am using


  • DWSIM 5.2 (Classic UI) and
  • Windows 10

The process demonstrated in this tutorial is identical in other OS also, such as-

  • Linux,
  • Mac OS X or
  • FOSSEE OS on ARM.
Slide Number 4

Pre-requisites

To practice this tutorial, you should know to:


  • Add components to a flowsheet
  • Select thermodynamic packages and
  • Add material stream and specify their properties.
Slide Number 5


Prerequisite Tutorials and Files

The prerequisite tutorials are mentioned on our website, spoken-tutorial.org


You can access these tutorials and all the associated files from this site.

Slide Number 6


Feed Conditions


Inlet Stream:


Mole Fraction(Methane): 0.05

Mole Fraction(Ethane): 0.1

Mole Fraction(Propane): 0.15

Mole Fraction(Isobutane): 0.1

Mole Fraction(N-butane): 0.2

Mole Fraction(Isopentane): 0.25

Mole Fraction(N-pentane): 0.15

Temperature: 25 degree C

Pressure: 5 bar


Property Package: Soave-Redlich-Kwong (SRK)

In this tutorial, using DWSIM, we will calculate:


1) Bubble Point Temperature at 2 bar

2) Dew Point Temperature at 10 bar


Here we provide the compounds, inlet stream conditions and property package.

I have already opened DWSIM on my machine.
File >>New Steady-state Simulation Go to File menu and select New Steady-state Simulation.
Point to Simulation Configuration Wizard window Simulation Configuration Wizard window appears.
Click on Next. At the bottom, click on the Next button.
Type Methane in the Search tab Now, in the Compounds Search tab, type Methane.
ChemSep database >>Methane Select Methane from ChemSep database.
Type Ethane in the Search tab Next, we will add Ethane.
Type Propane in the Search tab Similarly, add Propane.
Type Isobutane in the Search tab Next, add Isobutane.
Type N-butane in the Search tab Followed by N-butane.
Type Isopentane in the Search tab Similarly, add Isopentane.
Type N-pentane in the Search tab Then add N-pentane.
Click on Next. At the bottom of the window, click on the Next button.
Point to Property Packages The Property Packages opens.
Property Packages>>Available Property Package


Double click on Soave-Redlich-Kwong (SRK)

From Available Property Package list, double-click on Soave-Redlich-Kwong (SRK).
Click on Next button. Then click on the Next button.
Point to Flash Algorithm We are moved to a new window named Flash Algorithm.
Default Flash Algorithm >>Nested Loops (VLE) From Default Flash Algorithm select Nested Loops(VLE)
Click Next button. Click on the Next button at the bottom.
Point to System of Units The next option is System of Units.
System of Units >>C5 Under System of Units, select C5.
Click on Finish button. At the bottom, click on the Finish button.
Click on Maximize button. Let us maximize the simulation window for better visibility.
Cursor on the simulation window. Now let’s insert a material stream for which we have to calculate Bubble points and Dew points.
Point to Flowsheet Objects. On the right hand side of the main simulation window, go to Flowsheet Objects.
In the Filter List tab, type Material Stream In the Filter List tab, type Material Stream.
Click and drag Material Stream to the flowsheet From the displayed list, drag and drop a Material Stream to the Flowsheet.
Click on MSTR-000 Click on the Material Stream “MSTR-000” to view its properties.
Type Feed Let’s change the name of this stream to Feed.
Now we will specify the Feed stream properties.
Input Data>>Flash Spec>>Temperature and Pressure(TP) Go to the Input Data.

Select Flash Spec as Temperature and Pressure (TP), if not already selected.

By default, Temperature and Pressure are already selected as Flash Spec.

Input Data >>Temperature >>25 degree C

Press Enter

Change Temperature to 25 degree Celsius and press Enter.
Input Data >>Pressure >>5bar

Press Enter

Change Pressure to 5 bar and press Enter.
Now let us specify the feed stream compositions.
Composition >>Basis >>Mole Fractions Under Composition, choose the Basis as Mole Fractions, if not already selected.

By default, Mole Fractions is selected as Basis.

Methane: 0.05 Now for Methane, type the Amount as 0.05 and press Enter.
Ethane: 0.1 For Ethane, type it as 0.1 and press Enter.
Propane: 0.15 Similarly, for Propane, type 0.15 and press Enter.
Isobutane: 0.1 And for Isobutane, type 0.1 and press Enter.
N-butane: 0.2 Next, for N-butane, type 0.2 and press Enter.
Isopentane: 0.25 For Isopentane, type 0.25 and press Enter.
N-pentane: 0.15 Lastly, for N-pentane, type 0.15 and press Enter.
Point to the tick.

Click Accept Changes

On the right, click on this green tick to Accept Changes.
Click on Utilities Now we will see how property package calculates phase equilibrium data of compounds.

To do this, go to Utilities.

Click on Add Utility Click on Add Utility.
Object Type >> Material Streams In the Add Utility window under Object Type, select Material Streams.
Utility Type >> Phase Envelope Under Utility Type, select Phase Envelope.
Flowsheet Object >> Feed Under Flowsheet Object, select Feed.
Click on the Add Utility button. Then at the bottom, click on the Add Utility button.
Point to Phase Envelope window. Phase Envelope window opens.
Drag the phase envelope window. Let us adjust the Phase Envelope window for better visibility.
Name >> BubblePoint-DewPoint Enter Name as BubblePoint-DewPoint.
Settings >> Bubble Points Under Settings, Click on Bubble Points tab.
Point to Custom Initialization Select the check box against Custom Initialization.
Initial Flash >> PVF We are going to calculate bubble point temperature against given pressure.

So, let Initial Flash method be PVF.

Here, we will change only Initial Pressure and Pressure Step.

Initial Pressure >> 1 bar Type Initial Pressure as 1 bar and press Enter.
Pressure Step >> 1 bar Type Pressure Step as 1 bar and press Enter.
We will not change any temperature value as we are doing a PVF Flash.
Settings >> Dew Points Now, go to Dew Points tab.
We will repeat the same process as Bubble Points Initialization.
Point to Custom Initialization Select the check box against Custom Initialization.
Initial Flash >> PVF We are going to calculate dew point temperature against given pressure.

So, here also, let Initial Flash method be PVF.

Hence we will change only Initial Pressure and Pressure Step

Initial Pressure >> 1 bar Type Initial Pressure as 1 bar and press Enter.
Pressure Step >> 1 bar Type Pressure Step as 1 bar and press Enter.
Click on Calculate button at the bottom. Now click on the Calculate button at the bottom.
Point to the calculation process. The calculation process is running in the background.
Point to the dew points and bubble points. We can see the dew points and bubble points generated at different pressure and temperatures.
Results >> Table Under Results, click on Table.
Point to the Pb column>>2 bar

Point to the pressure value.

In the column Pb, look for 2 bar at which we had to calculate the bubble point.

Here is 2 bar under Pb column.

Point to the Tb column

Point to bubble point temperature value

Look for temperature in Tb column corresponding to 2 bar.

We can see the bubble point temperature to be minus 91.9274 degree C

Point 10 bar. Next we have to find Dew point temperature at 10 bar.
Point to the Pd column>> 10 bar.

Point to the pressure value.

In the column Pd, look for 10 bar at which we have to find the dew point.

Here is 10 bar under Pd column.

Point to the Td column

Point to dew point temperature value

Look for temperature in Td column corresponding to 10 bar.

We can see the dew point temperature to be 87.396 degree C.

There is an alternative way by which we can verify the correctness of the above results.
For this, let’s get back to flowsheet window.
Click on Feed. Click on Feed.
Flash Spec >> Pressure and Vapor Fraction (PVF) Under Input data, select Flash Spec as Pressure and Vapor Fraction (PVF)
Pressure >> 2 bar Type Vapor Phase Mole Fraction as 0 and press Enter.
Vapor Phase Mole Fraction >> 0 And Pressure as 2 bar and press Enter.
Point to the temperature value.

Point to the bubble point temperature.

Now check the temperature which is minus 91.9274 degree C.

This is the bubble point temperature at 2 bar pressure.

It matches the value obtained earlier from Phase envelope.

Similarly, let’s check for Dew point temperature.
Flash Spec >> Pressure and Vapor Fraction (PVF) Let the Flash Spec be same as Pressure and Vapor Fraction (PVF)
Pressure >> 10 bar Type Vapor Phase Mole Fraction as 1 and press Enter.
Vapor Phase Mole Fraction >> 1 And Pressure as 10 bar and press Enter.
Point to the temperature value

Point to the bubble point temperature.

Now check the temperature which is 87.396 degree C.

This is the dew point temperature at 10 bar pressure.

It matches the value obtained earlier from Phase envelope.

Let's summarize.
Slide Number 7


Summary

In this tutorial, we have learnt to generate:


  • Bubble Point Temperature at a given pressure
  • Dew Point Temperature at a given pressure
Slide Number 8


Assignment


Feed Conditions


Mole Fraction(Propane): 0.05

Mole Fraction(N-butane): 0.25

Mole Fraction(N-pentane): 0.4

Mole Fraction(N-hexane): 0.3

Temperature: 50 degree C

Pressure: 1.01325 bar


Property Package: Soave-Redlich-Kwong (SRK)

As an assignment,


Calculate the following for the given component system and inlet conditions:


a) Calculate Bubble Point Pressure at 20 degree C

b) Calculate Dew Point Pressure at 60 degree C

Slide Number 9

About the Spoken Tutorial Project

Watch the video available at following link.

http://spoken-tutorial.org/

It summarizes the Spoken Tutorial project.

Slide Number 10

Spoken Tutorial Workshops

The Spoken Tutorial Project Team
  • Conducts workshops and
  • Gives certificates
  • For more details, please write to us.
Slide Number 11


Forum Slide

Do you have questions in this Spoken Tutorial?

Please visit this site

Choose the minute and second where you have the question.

Explain your question briefly.

Someone from the FOSSEE team will answer them.

Please post your times queries in this forum.
Slide Number 12

DWSIM Flowsheeting Project

The FOSSEE team coordinates conversion of existing flow sheets into DWSIM.

We give honorarium and certificates.

For more details, please visit this site.

Slide Number 13

TextBook Companion Project

The FOSSEE team coordinates coding of solved examples of popular books.

We give honorarium and certificates.

For more details, please visit this site.

Slide Number 14

Lab Migration Project

The FOSSEE team helps migrate commercial simulator labs to DWSIM.

We give honorarium and certificates.

For more details, please visit this site

Slide Number 15

Acknowledgements

Spoken Tutorial and FOSSEE projects are funded by NMEICT, MHRD, Government of India.
Slide Number 16

Thanks

This tutorial is contributed by Kaushik Datta and Priyam Nayak.


Thanks for joining.

Contributors and Content Editors

Kaushik Datta, Nancyvarkey

Retrieved from "https://script.spoken-tutorial.org/index.php?title=DWSIM/C2/Calculation-of-Bubble-Points-and-Dew-Points/English&oldid=44073"