Difference between revisions of "Single-Board-Heater-System/C2/Using-SBHS-Virtual-Labs-on-Windows/English-timed"
From Script | Spoken-Tutorial
PoojaMoolya (Talk | contribs) (Created page with "{| Border=1 | <center>'''Time'''</center> | <center>'''Narration'''</center> |- |00:01 | Welcome to the spoken tutorial on Using '''Single Board heater System Virtual labs ''...") |
Sandhya.np14 (Talk | contribs) |
||
Line 5: | Line 5: | ||
|- | |- | ||
|00:01 | |00:01 | ||
− | | Welcome to the spoken tutorial on | + | | Welcome to the '''spoken tutorial''' on '''Using Single Board heater System Virtual labs on Windows OS'''. |
|- | |- | ||
| 00:08 | | 00:08 | ||
− | | In this spoken tutorial we will learn about: | + | | In this spoken tutorial, we will learn about: * Software installations required on the remote users' computer |
|- | |- | ||
| 00:15 | | 00:15 | ||
− | | Using '''SBHS''' website | + | |* Using '''SBHS''' website |
|- | |- | ||
| 00:17 | | 00:17 | ||
− | | Performing a '''Step test''' experiment remotely | + | |* Performing a '''Step test''' experiment remotely. |
|- | |- | ||
|00:21 | |00:21 | ||
− | | As a pre-requisite, watch the following tutorials '''Introduction to SBHS '''and '''Introduction to Xcos'''. | + | | As a pre-requisite, watch the following tutorials- '''Introduction to SBHS '''and '''Introduction to Xcos'''. |
|- | |- | ||
Line 29: | Line 29: | ||
|- | |- | ||
| 00:33 | | 00:33 | ||
− | | I am recording this tutorial on a '''Windows-7''' '''32-bit''' Operating System | + | | I am recording this tutorial on a '''Windows-7''' '''32-bit''' Operating System. |
|- | |- | ||
Line 37: | Line 37: | ||
|- | |- | ||
| 00:42 | | 00:42 | ||
− | | | + | |Scilab can be downloaded from '''sbhs dot os hyphen hardware dot in slash downloads '''OR '''www dot scilab dot org'''. |
|- | |- | ||
| 00:56 | | 00:56 | ||
− | |Please note that you will need | + | |Please note that you will need internet connectivity to install Scilab. |
|- | |- | ||
| 01:01 | | 01:01 | ||
− | | All '''SBHS '''experiment | + | | All '''SBHS '''experiment Scilab codes are written using '''Scilab 5.3.3 '''and is the recommended version. |
|- | |- | ||
| 01:10 | | 01:10 | ||
− | |A higher version of | + | |A higher version of Scilab will work equally well. |
|- | |- | ||
| 01:14 | | 01:14 | ||
− | |However, code modified in a higher version of | + | |However, code modified in a higher version of Scilab cannot be re-used in the lower version. |
|- | |- | ||
Line 61: | Line 61: | ||
|- | |- | ||
| 01:26 | | 01:26 | ||
− | |Now, the next step is to download the experiment | + | |Now, the next step is to download the experiment Scilab code. |
|- | |- | ||
Line 69: | Line 69: | ||
|- | |- | ||
| 01:33 | | 01:33 | ||
− | |In the address bar, type '''os hyphen hardware dot in''' and press the '''Enter''' key | + | |In the address bar, type: '''os hyphen hardware dot in''' and press the '''Enter''' key. |
|- | |- | ||
| 01:42 | | 01:42 | ||
− | |This is the website for '''opensource''' | + | |This is the website for '''opensource hardware'''. |
|- | |- | ||
Line 81: | Line 81: | ||
|- | |- | ||
| 01:50 | | 01:50 | ||
− | | On the left hand side, click on '''Downloads''' | + | | On the left hand side, click on '''Downloads'''. |
|- | |- | ||
| 01:54 | | 01:54 | ||
− | | Click on the download link for '''SBHS Scilab codes for Windows''' | + | | Click on the download link for '''SBHS Scilab codes for Windows'''. |
|- | |- | ||
| 02:02 | | 02:02 | ||
− | |It will download the '''Scilab''' | + | |It will download the '''Scilab code'''. |
|- | |- | ||
| 02:04 | | 02:04 | ||
− | | | + | | '''Save''' it on the Desktop. |
|- | |- | ||
| 02:07 | | 02:07 | ||
− | |Here it is | + | |Here it is! |
|- | |- | ||
Line 105: | Line 105: | ||
|- | |- | ||
| 02:12 | | 02:12 | ||
− | |Extract the content of this zip file on the | + | |'''Extract''' the content of this zip file on the Desktop. |
|- | |- | ||
| 02:16 | | 02:16 | ||
− | | To do so, | + | | To do so, right-click on it and choose '''Extract Here.''' |
|- | |- | ||
| 02:23 | | 02:23 | ||
− | |The contents inside this folder | + | |The contents inside this folder will be discussed at a later part of this tutorial. |
|- | |- | ||
| 02:29 | | 02:29 | ||
− | | Now let us see the '''SBHS Virtual labs''' website. | + | | Now, let us see the '''SBHS Virtual labs''' website. |
|- | |- | ||
| 02:33 | | 02:33 | ||
− | | On the left hand side, click on the link '''Virtual | + | | On the left hand side, click on the link '''Virtual Labs.''' |
|- | |- | ||
| 02:37 | | 02:37 | ||
− | | This is the interface from where one can gain access to do remote experiments on '''SBHS'''. | + | | This is the '''interface''' from where one can gain access to do remote experiments on '''SBHS'''. |
|- | |- | ||
Line 133: | Line 133: | ||
|- | |- | ||
| 02:55 | | 02:55 | ||
− | | After this, a form has to be filled and submitted. | + | | After this, a '''form''' has to be filled and submitted. |
|- | |- | ||
| 03:00 | | 03:00 | ||
− | |An activation link is emailed to the user after the form is submitted successfully. | + | |An activation link is emailed to the user after the '''form''' is submitted successfully. |
|- | |- | ||
| 03:06 | | 03:06 | ||
− | |The link received in the email | + | |The '''link''' received in the email should be used to complete the registration process. |
|- | |- | ||
| 03:12 | | 03:12 | ||
− | |Note that the activation process may not be immediate. It may take a few minutes | + | |Note that the activation process may not be immediate. It may take a few minutes. |
|- | |- | ||
Line 165: | Line 165: | ||
|- | |- | ||
| 03:41 | | 03:41 | ||
− | |In our case, a '''slot''' lasts for 55 minutes of every hour | + | |In our case, a '''slot''' lasts for 55 minutes of every hour. |
|- | |- | ||
Line 173: | Line 173: | ||
|- | |- | ||
| 03:53 | | 03:53 | ||
− | | One can either book '''Current Slot''' or a '''Future Slot''' | + | | One can either book '''Current Slot''' or a '''Future Slot'''. |
|- | |- |
Revision as of 07:41, 16 December 2016
|
|
00:01 | Welcome to the spoken tutorial on Using Single Board heater System Virtual labs on Windows OS. |
00:08 | In this spoken tutorial, we will learn about: * Software installations required on the remote users' computer |
00:15 | * Using SBHS website |
00:17 | * Performing a Step test experiment remotely. |
00:21 | As a pre-requisite, watch the following tutorials- Introduction to SBHS and Introduction to Xcos. |
00:29 | These are available on the spoken tutorial website. |
00:33 | I am recording this tutorial on a Windows-7 32-bit Operating System. |
00:39 | Ensure that Scilab is installed on your computer. |
00:42 | Scilab can be downloaded from sbhs dot os hyphen hardware dot in slash downloads OR www dot scilab dot org. |
00:56 | Please note that you will need internet connectivity to install Scilab. |
01:01 | All SBHS experiment Scilab codes are written using Scilab 5.3.3 and is the recommended version. |
01:10 | A higher version of Scilab will work equally well. |
01:14 | However, code modified in a higher version of Scilab cannot be re-used in the lower version. |
01:22 | I have already installed Scilab 5.3.3. |
01:26 | Now, the next step is to download the experiment Scilab code. |
01:31 | Open a web browser. |
01:33 | In the address bar, type: os hyphen hardware dot in and press the Enter key. |
01:42 | This is the website for opensource hardware. |
01:46 | Click on the project SBHS. |
01:50 | On the left hand side, click on Downloads. |
01:54 | Click on the download link for SBHS Scilab codes for Windows. |
02:02 | It will download the Scilab code. |
02:04 | Save it on the Desktop. |
02:07 | Here it is! |
02:09 | The file downloaded will be in zip format. |
02:12 | Extract the content of this zip file on the Desktop. |
02:16 | To do so, right-click on it and choose Extract Here. |
02:23 | The contents inside this folder will be discussed at a later part of this tutorial. |
02:29 | Now, let us see the SBHS Virtual labs website. |
02:33 | On the left hand side, click on the link Virtual Labs. |
02:37 | This is the interface from where one can gain access to do remote experiments on SBHS. |
02:46 | A first time user needs to register once, by clicking on the Login/Register option. |
02:55 | After this, a form has to be filled and submitted. |
03:00 | An activation link is emailed to the user after the form is submitted successfully. |
03:06 | The link received in the email should be used to complete the registration process. |
03:12 | Note that the activation process may not be immediate. It may take a few minutes. |
03:18 | I will now login with my registered account. |
03:22 | I will enter my username and password. |
03:28 | After a successful login, a user has access to Book Slot, View/Delete Slot etc. |
03:36 | A slot is the time duration in which you can perform an experiment. |
03:41 | In our case, a slot lasts for 55 minutes of every hour. |
03:47 | After clicking on the Book Slot option, the client will have two choices. |
03:53 | One can either book Current Slot or a Future Slot. |
03:58 | Book Now option will appear only if the current slot is vacant. |
04:03 | Book future slot option will always be available. |
04:07 | It will allow two non-consecutive slots to be booked, each day. |
04:12 | I will click on the Book Now option |
04:15 | You will receive an acknowledgement, with your booking details appearing on the top side. |
04:22 | The slot booking part is over. Let us now run a simple Step Test experiment, downloaded from the website. |
04:31 | Open the folder you downloaded and saved on the Desktop. |
04:36 | You can see that there is a StepTest folder and a common files folder |
04:45 | Do not move any of the folders from their location. |
04:48 | If the directory structure is changed, the experiment will not execute. |
04:53 | If you want one experiment to be copied elsewhere, make sure you copy the common files folder, too. |
05:00 | However, make sure the common files folder is always outside the experiment folder. |
05:07 | Open the common files folder. Open the file config |
05:13 | This file is used to do the proxy settings. |
05:17 | Do not change the contents of config file if you are inside IIT Bombay OR |
05:24 | You are outside IIT Bombay and using an open network. |
05:29 | For example, at home or using a mobile internet |
05:34 | Change the contents of config file if you are outside IIT Bombay and using a proxy network. |
05:42 | For example, at an institute, office etc. |
05:47 | Put the value of use proxy as Yes with Y capital. |
05:53 | Change the other details as per the proxy network which you are on. |
05:58 | Save and close this file. |
06:01 | Open the StepTest folder. |
06:05 | Locate and double click on the file run |
06:09 | It will open the python based SBHS client application. |
06:13 | Note that the first time execution of this file will take a minute to open the SBHS client. |
06:21 | It will show various parameters of the experiment like |
06:25 | SBHS Connection, Client Version, User login and Experiment status |
06:32 | Green dots mean that the sbhs client can connect to the server. |
06:38 | It also shows that the client version I am using is the latest. |
06:44 | User login and Experiment status is red because I have still not logged in and the experiment is not running. |
06:54 | It will also give you an option to login. |
06:58 | Type your username and password. |
07:03 | This username and password is the same as you used to book a slot. |
07:08 | Click on login. |
07:11 | Ensure that you login on the booked date and time, with correct login details. |
07:16 | Expect the message Ready to execute scilab code. |
07:21 | Switch to the StepTest folder which has the experiment files. |
07:26 | Double-click on the stepc file. |
07:29 | This should open Scilab automatically. |
07:33 | It should also open the file in Scilab editor. |
07:37 | If it doesn't, click on the File menu. Click on Open a file |
07:44 | Choose the file stepc and click on Open |
07:50 | Switch to the Scilab console. |
07:53 | Type the command getd space dot dot slash common files and press Enter. |
08:03 | Switch to the scilab editor. |
08:06 | On the Menu bar, click on Execute option and then click on File with echo |
08:14 | If the network is working properly, it will open an Xcos diagram. |
08:20 | If it doesn't, it will show error on the Scilab console. |
08:25 | Using the step test Xocs diagram, we can set the experiment parameters such as Heat and Fan. |
08:34 | Double-click on each block to change its parameters. |
08:39 | I will set the heat to vary from 30% to 45% after 300 seconds. |
08:46 | I will put the initial value as 30, final value equal to 45 and step time equal to 300. |
08:59 | Similarly, I will set the fan to be constant at 50% which is the default value. |
09:08 | Now let us save and execute the xcos diagram. |
09:13 | To execute, click on the Start button on the menu bar. |
09:18 | If there is no error, it will open a plot window. |
09:22 | It will consist of three graphs, Heat, Fan and Temperature from top to bottom. |
09:31 | Switch to the SBHS client. |
09:34 | It shows the values of current iteration, heat, fan, temperature and time left for experimentation. |
09:44 | It shows the log file name it has created for this experiment. |
09:49 | Switch to the browser. Click on Show video option. |
09:56 | It will give a live video feed of the SBHS you are currently accessing. |
10:01 | This is a real experiment and will take some time to complete. |
10:05 | I will pause this recording for some time and then resume again. |
10:11 | After sufficient time of experiment, the graph obtained is as shown. |
10:16 | I will stop the simulation by clicking on stop button available on the Xcos window. |
10:24 | Close the SBHS client window after the experiment is over. |
10:29 | Now, switch to the experiment folder and open the logs folder. |
10:36 | It will have a folder named after your username. |
10:40 | Open this folder and locate your log file. |
10:45 | Read the log file name as year month date hours minutes seconds dot txt |
10:54 | Use this log file for further analysis. |
10:58 | Let us summarise. |
11:00 | In this tutorial we learnt, What are the software installations required to do a remote experiment on SBHS |
11:09 | How to use the SBHS virtual labs website |
11:12 | How to use the python based SBHS client application |
11:16 | How to execute the Scilab code of an experiment |
11:20 | Watch the video available at the following link |
11:23 | It summarises the Spoken Tutorial project. |
11:26 | If you do not have good bandwidth, you can download and watch it |
11:30 | The Spoken Tutorial Project Team, Conducts workshops using spoken tutorials. |
11:35 | Gives certificates to those who pass an online test |
11:39 | For more details, please write to contact at spoken-tutorial.org |
11:46 | Spoken Tutorial Project is a part of the Talk to a Teacher project. |
11:50 | It is supported by the National Mission on Education through ICT, MHRD, Government of India |
11:57 | More information on this Mission is available at: [1] |
12:10 | Thanks for joining, This is Rupak Rokade from IIT Bombay signing off. Thank You |