Difference between revisions of "LibreOffice-Suite-Draw/C3/Basics-of-Layers-Password-Encryption-PDF/Gujarati"
From Script | Spoken-Tutorial
Jyotisolanki (Talk | contribs) (Created page with "{| border=1 |'''Time''' |'''Narration''' |- |00:01 |Welcome to the spoken tutorial on '''LibreOffice Draw''' - Basics of '''Layers''' and '''Password Encryption PDF'''. |- |...") |
Jyotisolanki (Talk | contribs) |
||
Line 5: | Line 5: | ||
|- | |- | ||
|00:01 | |00:01 | ||
− | | | + | | '''LibreOffice Draw''' ના - Basics of '''Layers''' and '''Password Encryption PDF''' પરના સ્પોકન ટ્યુટોરીયલ માં સ્વાગત છે. |
|- | |- | ||
|00:08 | |00:08 | ||
− | | | + | |આ ટ્યુટોરીયલમાં આપણે '''layers''' ની સામાન્ય જાણકારી શીખીશું. |
|- | |- | ||
|00:12 | |00:12 | ||
− | | | + | | આપણે આ પણ શીખીશું '''password encryption''' નો ઉપયોગ કરીને કેઈવી રીતે |
|- | |- | ||
|00:15 | |00:15 | ||
− | | | + | | '''Draw''' ફાઈલ ને પ્રોટેક્ટ કરવી, |
|- | |- | ||
|00:18 | |00:18 | ||
− | | | + | | '''PDF''' તરીકે એક્સપોર્ટ કરવી. |
|- | |- | ||
|00:20 | |00:20 | ||
− | | | + | |અહી આપણે '''Ubuntu Linux''' આવૃત્તિ 10.04 ને આપણા ઓપેરેટીંગ સીસ્ટમ તરીકે અને '''LibreOffice Suite''' આવૃત્તિ 3.3.4. ને વાપરી રહ્યા છીએ |
|- | |- | ||
|00:30 | |00:30 | ||
− | | | + | | '''Route Map'''ફાઈલ ખોલો. |
|- | |- | ||
|00:33 | |00:33 | ||
− | | | + | | '''Layers''' શું છે ? |
|- | |- | ||
| 00:34 | | 00:34 | ||
− | |'''Layers''' | + | |'''Layers''' પારદર્શક શીટ ની જેમ છે, જેને એક બીજા પર મુકવા માં આવે છે. |
|- | |- | ||
| 00:40 | | 00:40 | ||
− | | | + | | દરેક '''Draw''' ફાઈલમાં ત્રણ લેયરો છે. |
|- | |- | ||
| 00:43 | | 00:43 | ||
− | | | + | | '''Layout layer''' મૂળભૂત રીતે દ્ર્શ્યિત હોય છે. |
|- | |- | ||
|00:46 | |00:46 | ||
− | | | + | | આ એ છે, જ્યાં આપણે આપણા મોટાભાગના ગ્રાફીકો બનાવીએ છીએ. |
|- | |- | ||
| 00:50 | | 00:50 | ||
− | | | + | | '''Control layer''' એ '''control elements''' ને સંગ્રહ કરવા માટે વપરાય છે જેમકે '''buttons''' અને '''forms'''. |
|- | |- | ||
|00:56 | |00:56 | ||
− | | | + | | ''Dimensions layer''' જટિલ ડ્રોઈંગના માટે ડાયમેન્શન એટલેકે પરિણામ લાઈનો અથવા મેજરમેંટ એટલેકે માપ લાઈનોને દર્શાવામાં ઉપયોગ થાય છે. |
|- | |- | ||
| 01:03 | | 01:03 | ||
− | | | + | |ઉદાહરણ તરીકે ઘરના ચિત્રમાં ભીંતો ,ઈલેક્ટ્રીકલ વાયરીંગ વગેરેનું બરાબર માપ હોવું જોઈએ. |
|- | |- | ||
| 01:16 | | 01:16 | ||
− | | | + | | ચાલો ત્રણ નકશાઓ પ્રિન્ટ કરીએ જે ઘરથી શાળા સુધીની રસ્તો દર્શાવે. |
|- | |- | ||
| 01:23 | | 01:23 | ||
− | | | + | |તેને '''Map 1, Map 2''' અને '''Map 3''' તરીકે બોલાવીએ . |
|- | |- | ||
|01:28 | |01:28 | ||
− | |'''Map 1''', | + | |'''Map 1''', એરિયાના તમામ સીમાચિહ્નો દર્શાવે છે. |
|- | |- | ||
|01:32 | |01:32 | ||
− | | | + | | '''Map 2''',માં બે લેક, સ્ટેડિયમ ,અને કમર્શિયલ કોપ્લેક્સ શિવાયના તમાંમ ઓબ્જેક્ટો દર્શાવીએ. |
|- | |- | ||
|01:40 | |01:40 | ||
− | | | + | |'''Map 3''', માં પાર્ક શિવાયના તમામ ઓબ્જેક્ટો દર્શાવીએ. |
|- | |- | ||
| 01:45 | | 01:45 | ||
− | | | + | |શું આપણને આ દર્શાવવા માટે ત્રણ જુદા જુદા નકશાઓ બનાવવાની જરૂર છે ?. |
|- | |- | ||
| 01:49 | | 01:49 | ||
− | | | + | |ના , '''Draw''' એ '''Layers'''. ના મદદથી આનો ઉકેલ પ્રદાન કરે છે. |
|- | |- | ||
|01:54 | |01:54 | ||
− | | | + | | આ રીતે મહિતીના ઘણા લેયરો સાથે ફક્ત એક નકશાની ફાઈલો હોઈ શકે છે. |
|- | |- | ||
|01:59 | |01:59 | ||
− | | | + | | એક '''Draw''' પેજ વાપરીને આપણે '''layers''' સંયોજન ને પ્રિન્ટ કરી શકીએ છીએ. |
|- | |- | ||
| 02:06 | | 02:06 | ||
− | | | + | | '''RouteMap''' માં અમુક લેયરો ઉમેરો. |
|- | |- | ||
|02:09 | |02:09 | ||
− | | | + | | '''Layout layer''' પર ક્લિક કરો. |
|- | |- | ||
|02:11 | |02:11 | ||
− | | | + | |જમણું ક્લિક કરો અને '''Insert layer''' પસંદ કરો. |
|- | |- | ||
|02:15 | |02:15 | ||
− | | | + | | '''Insert layer''' ડાઈલોગ બોક્સ ખુલે છે. |
|- | |- | ||
|02:18 | |02:18 | ||
− | | | + | | '''“Name”''' ફિલ્ડમાં '''“Layer four”''' ટાઈપ કરો. |
|- | |- | ||
|02:21 | |02:21 | ||
− | | | + | |તમામ ચિત્રને સંબંધિત હોય એવું એવું કોઈ પણ શીર્ષક અને વર્ણન તમે ઉમેરી શકો છો. |
|- | |- | ||
|02:26 | |02:26 | ||
− | | | + | | '''“Visible”''' અને '''“Printable”''' બોક્સોને તપાસો. |
|- | |- | ||
|02:30 | |02:30 | ||
− | | | + | |ડાઈલોગ બોક્સથી બહાર જવ માટે '''OK''' પર ક્લિક કરો. |
|- | |- | ||
|02:33 | |02:33 | ||
− | | | + | | ફરી એક વાર '''Layout layer''' પર ક્લિક કરો. |
|- | |- | ||
|02:36 | |02:36 | ||
− | | | + | | '''Draw''' પેજ પર નકશો પસંદ કરીને તેને અનગ્રુપ કરો. |
|- | |- | ||
|02:40 | |02:40 | ||
− | | | + | | ત્યાર બાદ '''Lakes''' ને પસંદ કરો. |
|- | |- | ||
|02:43 | |02:43 | ||
− | |Press the '''Shift''' | + | |Press the '''Shift''' કી દબાવો અને સ્ટેડિયમ અને કમર્શિયલ કોમ્પ્લેક્સ પસંદ કરો. |
|- | |- | ||
|02:48 | |02:48 | ||
− | | | + | |આગળ જમણું ક્લિક કરો અને '''Cut''' પસંદ કરો. |
|- | |- | ||
|02:51 | |02:51 | ||
− | | | + | |ત્યારબાદ '''“Layer four”''' લેયર પર ક્લિક કરો અને તેને પેસ્ટ કરો. |
|- | |- | ||
|02:55 | |02:55 | ||
− | | | + | |તે બધાને '''Layout layer''' માના સ્થાન અનુસાર પેસ્ટ કરવામાં આવે છે. |
|- | |- | ||
|03:00 | |03:00 | ||
− | | | + | | ફરી એક વાર'''Layer Four''' પર ક્લિક કરો. |
|- | |- | ||
|03:03 | |03:03 | ||
− | | | + | |કોનટેક્સ્ટ મેનુ જોવા માટે જમણું ક્લિક કરો અને '''Modify Layer''' પસંદ કરો. |
|- | |- | ||
|03:08 | |03:08 | ||
− | | | + | | '''Modify Layer''' ડાઈલોગ બોક્સ દ્રશ્યમાન થાય છે. |
|- | |- | ||
|03:11 | |03:11 | ||
− | | | + | | '''“Visible”''' બોક્સને અનચેક કરો . '''OK''' પર ક્લિક કરો. |
|- | |- | ||
|03:14 | |03:14 | ||
− | | | + | | '''Layer Four''' માના ઓબ્જેક્ટો હવે દેખાતા નથી. |
|- | |- | ||
|03:18 | |03:18 | ||
− | | | + | |ઓબ્જેક્ટો તે સ્થાને રહે છે પણ દ્રશ્યમાન નથી. |
|- | |- | ||
|03:22 | |03:22 | ||
− | | | + | | '''Layout Layer''' પર ક્લિક કરો. ટેબ જો દેખાતું ના હોય, તો '''Layout layer''' જ્યાં શુધી દ્રશ્યમાન ના થાય ત્યાં શુધી ડાબું એરો બટન દબાવી રાખો. |
|- | |- | ||
| 03:31 | | 03:31 | ||
− | | | + | |આપણી પાસે આપણું '''Map 2'''! છે. સામન રીતે આપણે '''Map 3''' પણ બનાવી શકીએ છીએ. |
|- | |- | ||
|03:38 | |03:38 | ||
− | | | + | | ટ્યુટોરીયલ અટકાવો અને આ અસાઇનમેન્ટ કરો. |
|- | |- | ||
|03:41 | |03:41 | ||
− | | | + | |ઘરથી સ્કુલ કેમ્પસ સુધી બે રસ્તા બનાવો. |
|- | |- | ||
|03:45 | |03:45 | ||
− | |In the '''RouteMap''' | + | |In the '''RouteMap''' ચિત્રમાં દરેક રસ્તા ને જુદા લેયર પર બનવો, જેથી તે બે વિભિન્ન નકશાઓ તરીકે પ્રિન્ટ કરી શકાવાય જે દરેક, ફક્ત એક જ રસ્તો દર્શાવે. |
− | + | ||
|- | |- | ||
| 03:56 | | 03:56 | ||
− | | | + | | હવે ચાલો શીખીએ કેવી રીતે ફાઈલને '''PDF''' તરીકે એક્સપોર્ટ કરવી અને આપણી ડ્રો ફાઈલને પાસવર્ડ પ્રોટેક્ટ કરવી. |
|- | |- | ||
|04:04 | |04:04 | ||
− | | | + | | '''Draw''' file '''“RouteMap”''' આ ડ્રો ફાઈલને '''PDF''' તરીકે સંગ્રહીએ. |
|- | |- | ||
|04:08 | |04:08 | ||
− | | | + | |મેન મેનુમાં થી '''File''' પસંદ કરો.અને '''“Export as PDF”''' પર ક્લિક કરો. |
|- | |- | ||
|04:14 | |04:14 | ||
− | | | + | | '''PDF''' ડાઈલોગ બોક્સ ખુલે છે. |
|- | |- | ||
|04:15 | |04:15 | ||
− | | | + | | પહેલા ચાલો '''“General”''' વિકલ્પો સુયોજિત કરીએ. |
|- | |- | ||
|04:18 | |04:18 | ||
− | | | + | | '''“General”''' ટેબ પર ક્લિક કરો. |
|- | |- | ||
|04:20 | |04:20 | ||
− | | | + | | '''“Range”''' અંતર્ગત ચાલો , '''“All”''' પસંદ કરીએ કારણકે અપને ડ્રો ફાઈલના તમામ પેજોને '''PDF''' માં રૂપાંતર કરી રહ્યા છીએ. |
|- | |- | ||
|04:28 | |04:28 | ||
− | | | + | | '''“Images”''' અંતર્ગત ,આપણે '''“JPEG compression”''' પસંદ કરીશું. |
|- | |- | ||
|04:32 | |04:32 | ||
− | | | + | | સંકોચન કરવા માટે વપરાતો આ અતિ સામાન્ય ફોરમેટ છે. |
|- | |- |
Revision as of 12:54, 30 September 2015
Time | Narration |
00:01 | LibreOffice Draw ના - Basics of Layers and Password Encryption PDF પરના સ્પોકન ટ્યુટોરીયલ માં સ્વાગત છે. |
00:08 | આ ટ્યુટોરીયલમાં આપણે layers ની સામાન્ય જાણકારી શીખીશું. |
00:12 | આપણે આ પણ શીખીશું password encryption નો ઉપયોગ કરીને કેઈવી રીતે |
00:15 | Draw ફાઈલ ને પ્રોટેક્ટ કરવી, |
00:18 | PDF તરીકે એક્સપોર્ટ કરવી. |
00:20 | અહી આપણે Ubuntu Linux આવૃત્તિ 10.04 ને આપણા ઓપેરેટીંગ સીસ્ટમ તરીકે અને LibreOffice Suite આવૃત્તિ 3.3.4. ને વાપરી રહ્યા છીએ |
00:30 | Route Mapફાઈલ ખોલો. |
00:33 | Layers શું છે ? |
00:34 | Layers પારદર્શક શીટ ની જેમ છે, જેને એક બીજા પર મુકવા માં આવે છે. |
00:40 | દરેક Draw ફાઈલમાં ત્રણ લેયરો છે. |
00:43 | Layout layer મૂળભૂત રીતે દ્ર્શ્યિત હોય છે. |
00:46 | આ એ છે, જ્યાં આપણે આપણા મોટાભાગના ગ્રાફીકો બનાવીએ છીએ. |
00:50 | Control layer એ control elements ને સંગ્રહ કરવા માટે વપરાય છે જેમકે buttons અને forms. |
00:56 | Dimensions layer' જટિલ ડ્રોઈંગના માટે ડાયમેન્શન એટલેકે પરિણામ લાઈનો અથવા મેજરમેંટ એટલેકે માપ લાઈનોને દર્શાવામાં ઉપયોગ થાય છે. |
01:03 | ઉદાહરણ તરીકે ઘરના ચિત્રમાં ભીંતો ,ઈલેક્ટ્રીકલ વાયરીંગ વગેરેનું બરાબર માપ હોવું જોઈએ. |
01:16 | ચાલો ત્રણ નકશાઓ પ્રિન્ટ કરીએ જે ઘરથી શાળા સુધીની રસ્તો દર્શાવે. |
01:23 | તેને Map 1, Map 2 અને Map 3 તરીકે બોલાવીએ . |
01:28 | Map 1, એરિયાના તમામ સીમાચિહ્નો દર્શાવે છે. |
01:32 | Map 2,માં બે લેક, સ્ટેડિયમ ,અને કમર્શિયલ કોપ્લેક્સ શિવાયના તમાંમ ઓબ્જેક્ટો દર્શાવીએ. |
01:40 | Map 3, માં પાર્ક શિવાયના તમામ ઓબ્જેક્ટો દર્શાવીએ. |
01:45 | શું આપણને આ દર્શાવવા માટે ત્રણ જુદા જુદા નકશાઓ બનાવવાની જરૂર છે ?. |
01:49 | ના , Draw એ Layers. ના મદદથી આનો ઉકેલ પ્રદાન કરે છે. |
01:54 | આ રીતે મહિતીના ઘણા લેયરો સાથે ફક્ત એક નકશાની ફાઈલો હોઈ શકે છે. |
01:59 | એક Draw પેજ વાપરીને આપણે layers સંયોજન ને પ્રિન્ટ કરી શકીએ છીએ. |
02:06 | RouteMap માં અમુક લેયરો ઉમેરો. |
02:09 | Layout layer પર ક્લિક કરો. |
02:11 | જમણું ક્લિક કરો અને Insert layer પસંદ કરો. |
02:15 | Insert layer ડાઈલોગ બોક્સ ખુલે છે. |
02:18 | “Name” ફિલ્ડમાં “Layer four” ટાઈપ કરો. |
02:21 | તમામ ચિત્રને સંબંધિત હોય એવું એવું કોઈ પણ શીર્ષક અને વર્ણન તમે ઉમેરી શકો છો. |
02:26 | “Visible” અને “Printable” બોક્સોને તપાસો. |
02:30 | ડાઈલોગ બોક્સથી બહાર જવ માટે OK પર ક્લિક કરો. |
02:33 | ફરી એક વાર Layout layer પર ક્લિક કરો. |
02:36 | Draw પેજ પર નકશો પસંદ કરીને તેને અનગ્રુપ કરો. |
02:40 | ત્યાર બાદ Lakes ને પસંદ કરો. |
02:43 | Press the Shift કી દબાવો અને સ્ટેડિયમ અને કમર્શિયલ કોમ્પ્લેક્સ પસંદ કરો. |
02:48 | આગળ જમણું ક્લિક કરો અને Cut પસંદ કરો. |
02:51 | ત્યારબાદ “Layer four” લેયર પર ક્લિક કરો અને તેને પેસ્ટ કરો. |
02:55 | તે બધાને Layout layer માના સ્થાન અનુસાર પેસ્ટ કરવામાં આવે છે. |
03:00 | ફરી એક વારLayer Four પર ક્લિક કરો. |
03:03 | કોનટેક્સ્ટ મેનુ જોવા માટે જમણું ક્લિક કરો અને Modify Layer પસંદ કરો. |
03:08 | Modify Layer ડાઈલોગ બોક્સ દ્રશ્યમાન થાય છે. |
03:11 | “Visible” બોક્સને અનચેક કરો . OK પર ક્લિક કરો. |
03:14 | Layer Four માના ઓબ્જેક્ટો હવે દેખાતા નથી. |
03:18 | ઓબ્જેક્ટો તે સ્થાને રહે છે પણ દ્રશ્યમાન નથી. |
03:22 | Layout Layer પર ક્લિક કરો. ટેબ જો દેખાતું ના હોય, તો Layout layer જ્યાં શુધી દ્રશ્યમાન ના થાય ત્યાં શુધી ડાબું એરો બટન દબાવી રાખો. |
03:31 | આપણી પાસે આપણું Map 2! છે. સામન રીતે આપણે Map 3 પણ બનાવી શકીએ છીએ. |
03:38 | ટ્યુટોરીયલ અટકાવો અને આ અસાઇનમેન્ટ કરો. |
03:41 | ઘરથી સ્કુલ કેમ્પસ સુધી બે રસ્તા બનાવો. |
03:45 | In the RouteMap ચિત્રમાં દરેક રસ્તા ને જુદા લેયર પર બનવો, જેથી તે બે વિભિન્ન નકશાઓ તરીકે પ્રિન્ટ કરી શકાવાય જે દરેક, ફક્ત એક જ રસ્તો દર્શાવે. |
03:56 | હવે ચાલો શીખીએ કેવી રીતે ફાઈલને PDF તરીકે એક્સપોર્ટ કરવી અને આપણી ડ્રો ફાઈલને પાસવર્ડ પ્રોટેક્ટ કરવી. |
04:04 | Draw file “RouteMap” આ ડ્રો ફાઈલને PDF તરીકે સંગ્રહીએ. |
04:08 | મેન મેનુમાં થી File પસંદ કરો.અને “Export as PDF” પર ક્લિક કરો. |
04:14 | PDF ડાઈલોગ બોક્સ ખુલે છે. |
04:15 | પહેલા ચાલો “General” વિકલ્પો સુયોજિત કરીએ. |
04:18 | “General” ટેબ પર ક્લિક કરો. |
04:20 | “Range” અંતર્ગત ચાલો , “All” પસંદ કરીએ કારણકે અપને ડ્રો ફાઈલના તમામ પેજોને PDF માં રૂપાંતર કરી રહ્યા છીએ. |
04:28 | “Images” અંતર્ગત ,આપણે “JPEG compression” પસંદ કરીશું. |
04:32 | સંકોચન કરવા માટે વપરાતો આ અતિ સામાન્ય ફોરમેટ છે. |
04:36 | Next, click the Initial View tab. |
04:39 | We will keep the default values displayed in the dialog box. |
04:44 | Now, click on the Links tab. |
04:46 | We may have inserted links in the Draw file. |
04:49 | Again, let’s keep the default values set for Links. |
04:53 | Now, let’s assign a password to protect the PDF document. |
04:58 | To do so, click on the “Security” tab. |
05:01 | Click on the Set open password button. |
05:04 | The Set open password dialog box appears. |
05:08 | In the field “Password”, type any password with which you want to protect your file. |
05:14 | I will set my password as “Protect101”. |
05:18 | In the field “Confirm”, I will re-type my password “Protect101”.Click OK. |
05:25 | Next, let’s set the permission password to print or modify the document. |
05:31 | Click on the Set permission password button. |
05:35 | In the field “Password”, type the password of your choice. I will type “ProtectAgain0”. |
05:43 | In the field “Confirm”, I will retype the password “ProtectAgain0”and click OK. |
05:51 | Notice that permissions for Printing and Changes are active now. |
05:58 | It is always a good practice
|
06:08 | Under Printing, select the option Not Permitted. |
06:12 | The PDF can be printed only if the correct password is provided, else it cannot be printed. |
06:19 | Under Changes select the option “Not Permitted”. |
06:23 | The PDF can be edited only if the correct password is provided, else it cannot be modified. |
06:31 | Now, let us click the Export button at the bottom. |
06:35 | The Export dialog box appears. |
06:37 | From the left panel, under Places, click on the location where you want to save your file.I will choose Desktop. |
06:47 | Under File type, click PDF - Portable Document Format. |
06:51 | And click on the Save button. |
06:55 | The Draw file is converted to a PDF file and saved on the Desktop. |
07:00 | Let us switch to the Desktop now. |
07:03 | On the Desktop, double-click on the RouteMap PDF file. |
07:08 | The Enter password dialog box opens. |
07:11 | In the Password field, let's type the wrong password Protect111. |
07:17 | Click on the Unlock Document button |
07:20 | You will notice that the password field is cleared and we are prompted to enter the password once again. |
07:29 | In the Password field, let’s type the correct password Protect101. |
07:35 | Click on the Unlock Document button. The PDF file opens. |
07:40 | We have converted our Draw file into PDF and successfully password-protected it! |
07:47 | This brings us to the end of this tutorial. |
07:50 | Here we have learnt, the basics of layers. |
07:53 | How to convert a Draw file into a PDF |
07:56 | How to protect it using password encryption. |
08:01 | Here is an assignment for you. |
08:04 | Create another PDF of the RouteMap file. |
08:06 | In the PDF dialog box, change “Initial View” options |
08:10 | Observe what happens. |
08:12 | Check all the options for “User Interface”. |
08:16 | Set permission passwords. |
08:18 | Print this PDF. |
08:20 | Watch the video available at the following link |
08:23 | It summarises the Spoken Tutorial project |
08:26 | If you do not have good bandwidth, you can download and watch it |
08:31 | The Spoken Tutorial Project Team |
08:32 | Conducts workshops using spoken tutorials |
08:36 | Gives certificates for those who pass an online test |
08:39 | For more details, please write to contact at spoken hyphen tutorial dot org |
08:45 | Spoken Tutorial Project is a part of the Talk to a Teacher project |
08:50 | It is supported by the National Mission on Education through ICT, MHRD, Government of India |
08:57 | More information on this Mission is available at spoken hyphen tutorial dot org slash NMEICT hyphen Intro |
09:06 | This tutorial has been contributed by DesiCrew Solutions Pvt. Ltd.Thanks for joining |