Difference between revisions of "JChemPaint/C3/Properties-of-JChemPaint/Gujarati"
From Script | Spoken-Tutorial
Jyotisolanki (Talk | contribs) |
Jyotisolanki (Talk | contribs) |
||
Line 77: | Line 77: | ||
|- | |- | ||
| 01:28 | | 01:28 | ||
− | | નીચેના '''tool bar''' | + | | નીચેના '''tool bar''' મ્હ્ત્વના એલિમેન્ટના બટન બતાડે છે. |
|- | |- | ||
| 01:35 | | 01:35 | ||
− | | | + | | ટૂલબારની જમણી તરફ બે અધિક બટનો છે. |
|- | |- | ||
| 01:40 | | 01:40 | ||
− | | * '''Enter an element symbol via keyboard''' | + | | * '''Enter an element symbol via keyboard''' અને |
|- | |- | ||
Line 93: | Line 93: | ||
|- | |- | ||
| 01:48 | | 01:48 | ||
− | | | + | | '''Select new drawing symbol from periodic table''' બટન પસંદ કરો. |
|- | |- | ||
| 01:55 | | 01:55 | ||
− | | | + | | '''inbuilt Periodic Table''' સાથે '''Choose an element''' ખુલે છે. |
|- | |- | ||
| 02:01 | | 02:01 | ||
− | | | + | | અહી '''Periodic Table of elements''' આવું ટેક્સ્ટ લખેલ બોક્સ જોઈ શકો છો. |
|- | |- | ||
| 02:06 | | 02:06 | ||
− | | | + | | આ એક માહિતી આપનાર બોક્સ છે. |
|- | |- | ||
| 02:11 | | 02:11 | ||
− | | | + | | '''Element'''. આ માહિતી બોક્સ પસંદિત એલિમેન્ટની વિગતો દેખાડે છે. |
|- | |- | ||
| 02:16 | | 02:16 | ||
− | | | + | | ઉદાહરણ તરીકે : હું '''Oxygen''' પર કર્સર મુકીશ. |
|- | |- | ||
| 02:21 | | 02:21 | ||
− | | | + | | '''Oxygen''' વિષે ની વિગતો માહિતી બોક્સમાં દેખાય છે. |
|- | |- | ||
| 02:26 | | 02:26 | ||
− | | | + | | તેજ રીતે, આપણે વિવિધ એલિમેન્ટસની વિગતો આ માહિતી બોક્સમાં જોઈ શકીએ છીએ. |
|- | |- | ||
| 02:34 | | 02:34 | ||
− | | | + | | વિન્ડો બંદ કરવા માટે '''Close''' પર ક્લિક કરો. |
|- | |- | ||
| 02:38 | | 02:38 | ||
− | | | + | | '''Enter an element symbol via keyboard''' બટન પર ક્લિક કરો. |
|- | |- | ||
| 02:42 | | 02:42 | ||
− | | | + | | '''Panel''' પર ક્લીક કરો . |
|- | |- | ||
| 02:45 | | 02:45 | ||
− | | '''Enter element''' | + | | '''Enter element''' ટેક્સ્ટ બોક્સ ખુલે છે. |
|- | |- | ||
| 02:48 | | 02:48 | ||
− | | | + | | આપણે એલિમેન્ટના સીમ્બોલને ટેક્સ્ટ બોક્સમાં ટાઈપ કરી શકીએ છીએ. |
|- | |- | ||
| 02:53 | | 02:53 | ||
− | | | + | | ઉદાહરણ તરીકે : હું '''Xenon''' માટે '''Xe''' ટાઈપ કરીશ. |
|- | |- | ||
| 02:58 | | 02:58 | ||
− | | | + | | '''OK''' બટન પર ક્લિક કરો. |
|- | |- | ||
| 03:02 | | 03:02 | ||
− | | | + | | '''Panel'''. પેનલ પર '''Xenon''' નું સિમ્બોલ '''Xe''' દેખાય છે. |
|- | |- | ||
| 03:08 | | 03:08 | ||
− | | | + | | ચાલો હવે '''Xenondifluoride (XeF2)''' નું સ્ટ્રક્ચર બનાવીએ. |
|- | |- | ||
| 03:14 | | 03:14 | ||
− | | | + | | '''Edit''' મેનુ પર જાવ, '''Preferences''' શોધો અને તે પર ક્લિક કરો. |
|- | |- | ||
| 03:20 | | 03:20 | ||
− | | '''Preferences''' | + | | '''Preferences''' વિન્ડો ખુલે છે. |
|- | |- | ||
| 03:23 | | 03:23 | ||
− | | | + | | '''Show Implicit hydrogens''' જો ચેક હોય તો તેને અનચેક કરો.\ |
|- | |- | ||
| 03:29 | | 03:29 | ||
− | | | + | | '''Preferences''' વિન્ડોને બંદ કરવા માટે '''OK''' પર ક્લિક કરો. |
|- | |- | ||
| 03:33 | | 03:33 | ||
− | | | + | | '''Fluorine(F)''' બટન પર ક્લિક કરો અને પછી '''Single bond''' બટન પર ક્લિક કરો. |
|- | |- | ||
| 03:39 | | 03:39 | ||
− | | | + | | '''Xenon''' પરમાણું પર કર્સર ને મુવ કરો. |
|- | |- | ||
| 03:42 | | 03:42 | ||
− | | | + | | નોંધ લો કે એક નાનું વર્તુળ તેના પર દેખાય છે. |
|- | |- | ||
| 03:46 | | 03:46 | ||
− | | | + | | ડાબું માઉસ બટનને ક્લિક કરીને તેને પકડી રાખો. |
|- | |- | ||
| 03:50 | | 03:50 | ||
− | | | + | | અને પછી બે '''Xenon-Fluoride''' બોન્ડસ દોરવા માટે તેને ડ્રેગ કરો. |
|- | |- | ||
| 03:56 | | 03:56 | ||
− | | | + | | હવે હું ''''''Xenon's''' પરમાણું ના '''Popup Menu'''''' વિષે સમજાવીશ. |
|- | |- | ||
| 04:02 | | 04:02 | ||
− | | | + | | '''Xenon''' પરમાણું પાસે કર્સર ને મુવ કરો, તે પર જમણું ક્લિક કરો. |
|- | |- | ||
| 04:07 | | 04:07 | ||
− | | '''Xenon's | + | | '''Xenon's પરમાણુંનું '''Popup Menu'''''' ખુલે છે. |
|- | |- |
Revision as of 16:37, 30 April 2015
Time | Narration |
00:01 | નમસ્તે મિત્રો. Properties of JChemPaint. ના ટ્યુટોરીયલમાં સ્વાગત છે. |
00:07 | આ ટ્યુટોરીયલમાં આપણે શીખીશું . |
00:09 | * Periodic table trends |
00:11 | * રીએક્શનો બનાવવા. |
00:12 | અને * R-Group query ને સેટ અપ કરતા. |
00:16 | આ ટ્યુટોરીયલ રેકોર્ડ કરવા માટે, હું ઉપયોગ કરી રહી છું. |
00:19 | * Ubuntu Linux OS આવૃત્તિ 12.04 |
00:23 | * JChemPaint આવૃત્તિ 3.3-1210 |
00:29 | * Java આવૃત્તિ 7 |
00:31 | આ ટ્યુટોરીયલના અનુસરણ માટે તમે JChemPaint કેમિકલ સ્ટ્રક્ચર એડિટર સાથે પરિચિત હોવા જોઈએ. |
00:39 | * જો નથી તો,તો અમારી વેબ સાઈટનો સંદર્ભલો |
00:44 | ચાલો JChemPaint વિન્ડો પર જઈએ. |
00:48 | યાદ કરોકે આપણે આપણી .jar ફાઈલ ડેસ્કટોપ પર સેવ કરી હતી. |
00:54 | ટર્મિનલ ખોલવા માટે એક સાથે CTRl+ALt અને T |
01:00 | ટાઈપ કરો '“cd space Desktop” અને Enter દબાઓ. |
01:06 | ટાઈપ કરો “java space -jar space ./jchempaint-3.3-1210.jar” અને Enter દબાઓ. |
01:21 | JChemPaint વિન્ડો ખુલે છે. |
01:24 | ચાલો Periodic Table trends ટેબલ સાથે શરૂઆત કરીએ. |
01:28 | નીચેના tool bar મ્હ્ત્વના એલિમેન્ટના બટન બતાડે છે. |
01:35 | ટૂલબારની જમણી તરફ બે અધિક બટનો છે. |
01:40 | * Enter an element symbol via keyboard અને |
01:44 | * Select new drawing symbol from periodic table. |
01:48 | Select new drawing symbol from periodic table બટન પસંદ કરો. |
01:55 | inbuilt Periodic Table સાથે Choose an element ખુલે છે. |
02:01 | અહી Periodic Table of elements આવું ટેક્સ્ટ લખેલ બોક્સ જોઈ શકો છો. |
02:06 | આ એક માહિતી આપનાર બોક્સ છે. |
02:11 | Element. આ માહિતી બોક્સ પસંદિત એલિમેન્ટની વિગતો દેખાડે છે. |
02:16 | ઉદાહરણ તરીકે : હું Oxygen પર કર્સર મુકીશ. |
02:21 | Oxygen વિષે ની વિગતો માહિતી બોક્સમાં દેખાય છે. |
02:26 | તેજ રીતે, આપણે વિવિધ એલિમેન્ટસની વિગતો આ માહિતી બોક્સમાં જોઈ શકીએ છીએ. |
02:34 | વિન્ડો બંદ કરવા માટે Close પર ક્લિક કરો. |
02:38 | Enter an element symbol via keyboard બટન પર ક્લિક કરો. |
02:42 | Panel પર ક્લીક કરો . |
02:45 | Enter element ટેક્સ્ટ બોક્સ ખુલે છે. |
02:48 | આપણે એલિમેન્ટના સીમ્બોલને ટેક્સ્ટ બોક્સમાં ટાઈપ કરી શકીએ છીએ. |
02:53 | ઉદાહરણ તરીકે : હું Xenon માટે Xe ટાઈપ કરીશ. |
02:58 | OK બટન પર ક્લિક કરો. |
03:02 | Panel. પેનલ પર Xenon નું સિમ્બોલ Xe દેખાય છે. |
03:08 | ચાલો હવે Xenondifluoride (XeF2) નું સ્ટ્રક્ચર બનાવીએ. |
03:14 | Edit મેનુ પર જાવ, Preferences શોધો અને તે પર ક્લિક કરો. |
03:20 | Preferences વિન્ડો ખુલે છે. |
03:23 | Show Implicit hydrogens જો ચેક હોય તો તેને અનચેક કરો.\ |
03:29 | Preferences વિન્ડોને બંદ કરવા માટે OK પર ક્લિક કરો. |
03:33 | Fluorine(F) બટન પર ક્લિક કરો અને પછી Single bond બટન પર ક્લિક કરો. |
03:39 | Xenon પરમાણું પર કર્સર ને મુવ કરો. |
03:42 | નોંધ લો કે એક નાનું વર્તુળ તેના પર દેખાય છે. |
03:46 | ડાબું માઉસ બટનને ક્લિક કરીને તેને પકડી રાખો. |
03:50 | અને પછી બે Xenon-Fluoride બોન્ડસ દોરવા માટે તેને ડ્રેગ કરો. |
03:56 | હવે હું 'Xenon's પરમાણું ના Popup Menu' વિષે સમજાવીશ. |
04:02 | Xenon પરમાણું પાસે કર્સર ને મુવ કરો, તે પર જમણું ક્લિક કરો. |
04:07 | 'Xenon's પરમાણુંનું Popup Menu' ખુલે છે. |
04:11 | Here, I will explain about Isotopes, Change Element and Properties options. |
04:18 | Let's first move to Isotopes. |
04:21 | A submenu opens with a list of Isotopes of Xenon. |
04:26 | Next, I will move the cursor to Change Element. |
04:30 | A submenu opens with various categories of elements. |
04:36 | I will scroll down to various categories. |
04:40 | I will choose Alkali Earth Metals. |
04:44 | Alkali Earth Metals list opens. |
04:48 | Select Calcium(Ca) from the list. |
04:52 | We see that element Xenon is replaced by Calcium. |
04:57 | Now, we move on to Molecular Properties option. |
05:01 | Right click on Calcium. |
05:04 | Calcium's Atom Popup Menu opens. |
05:08 | Click on Molecular Properties option. |
05:11 | Properties text box opens. |
05:14 | Type the name of the compound as Calcium Fluoride and click on OK button. |
05:20 | Name of the compound is displayed below the structure. |
05:24 | Let us save the file now. |
05:26 | Click on Save button on the tool bar. |
05:30 | Save dialog box opens. |
05:32 | Type the file name as Calcium-fluoride. |
05:36 | Click on Save button. |
05:39 | Next, we will learn how to create a reaction. |
05:42 | To draw a reaction, we need to draw the required structures. |
05:48 | I have opened a new window with required structures. |
05:52 | Here the reactants are Propene and Chlorine molecules and product is 1,2-dicholoropropane. |
06:01 | On the left side tool bar, click on the Reaction arrow button. |
06:06 | Click between reactants and products. |
06:10 | The reaction is created. |
06:13 | We will now allign the structures properly in the reaction. |
06:18 | Click on Relayout the structures button on the top tool bar.Structures align properly |
06:27 | I will now discuss about how to set up an R group query. |
06:31 | What is an R-group query? |
06:35 | * An R-group query involves Root structure and substituents. |
06:41 | * It represents substitution on the same root structure. |
06:45 | * It can involve derivatives which differ in one or more substituents. |
06:53 | Click on Create a new file icon to open a new window. |
07:01 | Click on Draw a chain button. |
07:03 | Click on the Panel to draw a Carbon chain with three Carbon atoms. |
07:09 | Let's create a substituent that has to be attached to the Carbon chain. |
07:14 | For example, Benzene. |
07:17 | Click on Benzene ring on right side tool bar. |
07:22 | Click on the Panel. |
07:24 | Let's label the terminal Carbon atom as R1 in the Carbon chain. |
07:31 | Right click on terminal Carbon atom. |
07:35 | Atom Pop menu opens. |
07:38 | Scroll down to Pseudo Atoms. |
07:42 | A submenu opens; select R1. |
07:45 | Now let's define the Carbon chain as root structure. |
07:50 | Click on Selection button. |
07:53 | Select the Root structure by dragging over it. |
07:57 | Go to R-groups menu and select Define as Root Structure. |
08:04 | The substituent structure will be added as Not in R-Group. |
08:10 | Click on Selection button; |
08:13 | select the Substituent. |
08:16 | Go to R-groups menu and select Define as Substituent. |
08:22 | An input box opens. |
08:24 | Here, enter an R-group number as “1” and click on OK button. |
08:30 | The substituent will be numbered as R1. |
08:34 | On the Root structure, the substituent R1 will be marked with an asterisk(*) |
08:41 | The attaching Carbon atom of the substituent R1 will also be marked with an asterisk(*). |
08:49 | Click on the Selection button, select Root Structure and substituent(R1). |
08:56 | Go to R-groups menu, select General Possible configurations(sdf). |
09:03 | Save dialog box opens. |
09:06 | Type the file name as r-group, select the location as Desktop. |
09:12 | Click on Save button. |
09:15 | Click on Open icon on the tool bar. |
09:19 | Open dialogue box opens. |
09:22 | In the “Files of Type”, select “All Files” |
09:27 | Click on Desktop. |
09:29 | Click Open; then select the saved r-group file. |
09:34 | Click on “Open” button. |
09:37 | A message pops up; click OK. |
09:41 | A new file opens with r-group query structure. |
09:46 | To allign the structure properly, click on Relayout the structure button on the tool bar. |
09:54 | The structure shown is root structure along with attached R-group substituent Benzene. |
10:02 | Let's summarize. |
10:04 | In this tutorial we have learnt |
10:06 | * Periodic table trends |
10:09 | * Draw a reaction |
10:11 | * Set up R-Group query. |
10:14 | As an assignment, |
10:16 | * Explore various Periodic table trends and |
10:19 | * Draw reactions of your choice. |
10:24 | This video summarizes the Spoken Tutorial project |
10:28 | If you do not have good bandwidth, you can download and watch it. |
10:33 | Spoken Tutorial team conducts workshops using Spoken Tutorials and gives certificates. |
10:39 | Please contact us. |
10:42 | The Spoken Tutorial Project is funded by NMEICT, MHRD Government of India. |
10:49 | More information on this Mission is available at this link. |
10:55 | This is Madhuri Ganapathi from IIT Bombay signing off. Thank you for joining. |