Difference between revisions of "Osdag/C3/Specifying-design-preferences-in-Osdag/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
 
(4 intermediate revisions by 3 users not shown)
Line 4: Line 4:
  
 
'''Keywords:''' '''Osdag, member design, connection design, steel design optimisation, Tension member, Design Preference, bolt design, detailing, gusset plate, video tutorial'''
 
'''Keywords:''' '''Osdag, member design, connection design, steel design optimisation, Tension member, Design Preference, bolt design, detailing, gusset plate, video tutorial'''
−
 
−
'''Outline: '''
 
−
* Perform the design
 
−
* View log messages
 
−
* Review design results
 
−
* Explore '''Design Preferences'''
 
−
* Define '''Member '''preferences
 
−
* About custom sections
 
−
* Define '''Connector '''preferences
 
−
* Define '''Bolt '''preferences
 
−
* Define '''Detailing '''preferences
 
−
* Perform design using special preferences
 
−
* Compare output results
 
−
 
−
 
−
 
−
 
  
  
Line 31: Line 14:
  
 
'''Title Slide'''
 
'''Title Slide'''
−
|| Welcome to the Spoken Tutorial on '''Specifying design preferences in Osdag.'''
+
|| Welcome to the Spoken Tutorial on '''Specifying design preferences in Osdag'''.
 
|-  
 
|-  
 
|| '''Slide'''
 
|| '''Slide'''
Line 56: Line 39:
  
 
'''Pre-requisites'''
 
'''Pre-requisites'''
−
 
−
 
−
 
−
 
  
  
 
[https://osdag.fossee.in/ https://spoken-tutorial.org]
 
[https://osdag.fossee.in/ https://spoken-tutorial.org]
 
|| To follow this tutorial you should have,
 
|| To follow this tutorial you should have,
 +
 
* '''Osdag''' installed on your system
 
* '''Osdag''' installed on your system
 
* Basic knowledge of '''structural steel design'''
 
* Basic knowledge of '''structural steel design'''
−
 
−
 
−
 
  
  
Line 79: Line 56:
 
||  
 
||  
  
−
* The files used in this tutorial are available in the '''Code Files'''' link
+
* The files used in this tutorial are available in the '''Code Files''' link
  
 
* Please download and extract them
 
* Please download and extract them
Line 93: Line 70:
 
|-
 
|-
 
|| Point to the '''home page''' of the '''Tension Member Design - Bolted to End Gusset module'''
 
|| Point to the '''home page''' of the '''Tension Member Design - Bolted to End Gusset module'''
−
|| Switch to the '''home page''' of the '''Tension Member Design - Bolted to End Gusset module.'''
+
|| Switch to the '''home page''' of the '''Tension Member Design- Bolted to End Gusset module.'''
 
|-
 
|-
 
|| Point toward the '''Input Dock''' fields  
 
|| Point toward the '''Input Dock''' fields  
Line 133: Line 110:
 
* '''Hole Type: Over-sized'''
 
* '''Hole Type: Over-sized'''
 
* '''Slip factor: 0.48'''
 
* '''Slip factor: 0.48'''
−
 
−
 
−
 
  
 
|-
 
|-
Line 144: Line 118:
 
* '''Edge Preparation Method: machine-flame cut'''
 
* '''Edge Preparation Method: machine-flame cut'''
 
* '''Environment: Corrosive'''
 
* '''Environment: Corrosive'''
−
 
−
 
−
 
  
  
 
'''Design:'''
 
'''Design:'''
 
* '''Limit State Design'''
 
* '''Limit State Design'''
−
 
  
 
|-
 
|-
Line 163: Line 133:
 
|-
 
|-
 
|| Click on the '''Spacing Details button.'''
 
|| Click on the '''Spacing Details button.'''
−
|| Click the '''Spacing Details button '''under '''End Connection '''in the '''Output Dock'''.
+
|| Click the '''Spacing Details button''' under '''End Connection '''in the '''Output Dock'''.
 
|-
 
|-
 
|| Point toward the '''Spacing Details '''window
 
|| Point toward the '''Spacing Details '''window
Line 175: Line 145:
 
|-
 
|-
 
|| Only narration
 
|| Only narration
−
|| This means that there are 32 bolts on each '''gusset plate '''or 16 bolts per '''Angle'''.
+
|| This means that there are 32 bolts on each '''gusset plate ''' or 16 bolts per '''Angle'''.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 184: Line 154:
 
|-
 
|-
 
|| Point toward '''Capacity (kN)''' under '''Bolt Details''' output
 
|| Point toward '''Capacity (kN)''' under '''Bolt Details''' output
−
|| Also, notice the''' bolt capacity''' for the given design.
+
|| Also, notice the ''' bolt capacity''' for the given design.
  
  
−
It is '''18.78 kN''' as of now.
+
It is '''18.78 kilo Newton''' as of now.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 199: Line 169:
 
|-
 
|-
 
|| Select '''Design Preferences '''
 
|| Select '''Design Preferences '''
−
|| Select '''Design Preferences '''from the list.
+
|| Select '''Design Preferences ''' from the list.
 
|-
 
|-
 
|| Point toward the '''Design Preference''' window
 
|| Point toward the '''Design Preference''' window
Line 208: Line 178:
 
|-
 
|-
 
|| Click on '''Angle Section'''
 
|| Click on '''Angle Section'''
−
|| Typically, these sections include;* Details of the selected member.
+
|| Typically, these sections include;
 +
* Details of the selected member.
  
  
Line 243: Line 214:
 
|-
 
|-
 
|| Point toward '''Designation''', '''Section Profile''' and '''Conn_Location'''
 
|| Point toward '''Designation''', '''Section Profile''' and '''Conn_Location'''
−
|| Here, section details like '''designation '''and the profile are shown.
+
|| Here, section details like '''designation ''' and the profile are shown.
 
|-
 
|-
 
|| Point toward '''Mechanical Properties'''
 
|| Point toward '''Mechanical Properties'''
−
|| Below section details, we see '''Mechanical Properties.'''
+
|| Below section details, we see '''Mechanical Properties'''.
 
|-
 
|-
 
|| Point to the properties.
 
|| Point to the properties.
−
|| These properties get populated based on inputs in the '''Input Dock '''and the codal provisions
+
|| These properties get populated based on inputs in the '''Input Dock ''' and the codal provisions
−
|-
+
−
|| Point to Angle properties.
+
−
|| We will keep the '''Angle '''properties unchanged.
+
 
|-
 
|-
 
|| Point toward '''Dimensions'''
 
|| Point toward '''Dimensions'''
Line 258: Line 226:
 
|-
 
|-
 
|| Point to the dimensions.
 
|| Point to the dimensions.
−
|| These dimensions are fetched from the '''Indian Standard, IS 808''' database of '''Osdag'''
+
|| These dimensions are fetched from the '''Indian Standard, IS 808''' database of '''Osdag'''.
 
|-
 
|-
 
|| Point toward the section image
 
|| Point toward the section image
Line 270: Line 238:
 
|-
 
|-
 
|| Point toward '''Section Properties '''fields
 
|| Point toward '''Section Properties '''fields
−
|| These properties are also fetched from the '''Osdag '''database at run-time.
+
|| These properties are also fetched from the '''Osdag ''' database at run-time.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
−
|| For a user-defined section not present in the database, properties are calculated by '''Osdag '''internally.
+
|| For a user-defined section not present in the database, properties are calculated by '''Osdag ''' internally.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 279: Line 247:
 
|-
 
|-
 
|| Only narration
 
|| Only narration
−
|| Users can add single or multiple custom sections to the '''Osdag '''database and use it in design.
+
|| Users can add single or multiple custom sections to the '''Osdag ''' database and use it in design.
 
|-
 
|-
 
|| Point toward '''Add '''button
 
|| Point toward '''Add '''button
−
|| The '''Add '''button at the bottom allows to Add a single custom section to the database.
+
|| The '''Add ''' button at the bottom allows to Add a single custom section to the database.
 
|-
 
|-
−
|| Point toward the '''Download xlsx file, '''and '''Import xlsx file '''button
+
|| Point toward the '''Download xlsx file, '''and '''Import xlsx file ''' buttons
−
||For adding multiple sections at once using an excel sheet, use the '''Download '''and '''Import xlsx '''buttons.
+
||For adding multiple sections at once using an excel sheet, use the '''Download ''' and '''Import xlsx '''buttons.
 
|-
 
|-
−
|| Only narration
+
|| Point toward the '''Download xlsx file, '''and '''Import xlsx file ''' buttons
 
|| We will explore this feature in another tutorial.
 
|| We will explore this feature in another tutorial.
 
|-
 
|-
Line 294: Line 262:
 
|-
 
|-
 
|| Click on the '''Connector '''tab
 
|| Click on the '''Connector '''tab
−
|| Let us move to the '''Connector '''tab.
+
|| Let us move to the '''Connector ''' tab.
 
|-
 
|-
 
|| Point toward the '''Inputs '''fields
 
|| Point toward the '''Inputs '''fields
−
|| Here, we see the '''Material '''properties of the '''connector '''material.
+
|| Here, we see the '''Material ''' properties of the '''connector '''material.
 
|-
 
|-
 
|| Point toward the '''Material drop-down menu'''
 
|| Point toward the '''Material drop-down menu'''
Line 309: Line 277:
 
|-
 
|-
 
|| Click on the '''Material drop-down menu '''and select '''E300 (Fe 440)''' from the list
 
|| Click on the '''Material drop-down menu '''and select '''E300 (Fe 440)''' from the list
−
|| Click on the '''Material drop-down menu '''and select '''E300 (Fe 440)''' from the list.
+
|| Click on the '''Material drop-down menu ''' and select '''E300 (Fe 440)''' from the list.
 
|-
 
|-
 
|| Point toward the '''Ultimate Strength''' and '''Yield Strength''' field
 
|| Point toward the '''Ultimate Strength''' and '''Yield Strength''' field
Line 315: Line 283:
 
|-
 
|-
 
|| Click on the '''Bolt '''tab
 
|| Click on the '''Bolt '''tab
−
|| Let us now move to the '''Bolt '''tab.
+
|| Let us now move to the '''Bolt ''' tab.
 
|-
 
|-
 
|| Point toward '''Type '''and '''Hole Type'''
 
|| Point toward '''Type '''and '''Hole Type'''
Line 321: Line 289:
 
|-
 
|-
 
|| Point to the Hole type.
 
|| Point to the Hole type.
−
|| The desired Hole Type is '''Over-sized'''.
+
|| The desired '''Hole Type''' is '''Over-sized'''.
 
|-  
 
|-  
 
|| Click on the '''Hole Type drop-down menu '''and select '''Over-sized''' from the list
 
|| Click on the '''Hole Type drop-down menu '''and select '''Over-sized''' from the list
Line 336: Line 304:
 
|-
 
|-
 
|| Point toward the '''Description text box'''
 
|| Point toward the '''Description text box'''
−
|| A description of the slip factor values is shown in the '''Description text box.'''
+
|| A description of the '''slip factor''' values is shown in the '''Description text box'''.
 
|-
 
|-
 
|| Highlight '''IS 800 Table 20'''
 
|| Highlight '''IS 800 Table 20'''
Line 342: Line 310:
 
|-
 
|-
 
|| Highlight '''xi) Sand blasted surface 0.48''' in the '''Description text box'''
 
|| Highlight '''xi) Sand blasted surface 0.48''' in the '''Description text box'''
−
|| We see, for a slip factor of 0.48, the surface treatment is of '''Sand blasted''' type.
+
|| We see, for a '''slip factor''' of 0.48, the surface treatment is of '''Sand blasted''' type.
 
|-
 
|-
 
|| Point to the bolt preferences.
 
|| Point to the bolt preferences.
Line 348: Line 316:
 
|-
 
|-
 
|| Click on the '''Detailing '''tab
 
|| Click on the '''Detailing '''tab
−
|| Let us now move to the '''Detailing '''tab.
+
|| Let us now move to the '''Detailing ''' tab.
 
|-  
 
|-  
 
|| Click on the '''Edge Preparation Method drop-down menu '''and select '''machine-flame cut''' from the list
 
|| Click on the '''Edge Preparation Method drop-down menu '''and select '''machine-flame cut''' from the list
−
|| Click on the '''Edge Preparation Method drop-down menu '''and select '''machine-flame cut''' from the list.
+
|| Click on the '''Edge Preparation Method drop-down menu ''' and select '''machine-flame cut''' from the list.
 
|-  
 
|-  
 
|| Point toward the '''Gap '''textbox
 
|| Point toward the '''Gap '''textbox
−
|| The '''Gap '''preference is not applicable here. We will leave it as default.
+
|| The '''Gap ''' preference is not applicable here.  
 +
 
 +
We will leave it as default.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 362: Line 332:
 
We need to incorporate this condition in the design.
 
We need to incorporate this condition in the design.
 
|-  
 
|-  
−
|| Point toward the '''Are the Members Exposed to Corrosive Influences drop-down''' menu
+
|| Point toward the '''Are the Members Exposed to Corrosive Influences drop-down''' menu.
 
|| Click on the '''Corrosive Influences drop-down''' menu and select '''Yes'''.
 
|| Click on the '''Corrosive Influences drop-down''' menu and select '''Yes'''.
 
|-
 
|-
 
|| Point toward the '''Description text box'''
 
|| Point toward the '''Description text box'''
−
|| The '''Description text box '''shows a description with reference to the corresponding '''IS 800 clauses'''
+
|| The '''Description text box ''' shows a description with reference to the corresponding '''IS 800 clauses'''
 
|-
 
|-
−
|| Only narration
+
||Point to the '''Description text box '''.
 
|| Users may refer to this description for a better understanding of these design clauses.
 
|| Users may refer to this description for a better understanding of these design clauses.
 
|-
 
|-
Line 375: Line 345:
 
|-  
 
|-  
 
|| Point toward the '''Design Method''' '''drop-down''' menu
 
|| Point toward the '''Design Method''' '''drop-down''' menu
−
|| We see the default '''Design Method '''is '''Limit State Design.'''
+
|| We see the default '''Design Method ''' is '''Limit State Design'''.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 384: Line 354:
 
|-
 
|-
 
|| Only narration
 
|| Only narration
−
|| We have defined all the preferences.
+
|| We have defined all the preferences.  
−
 
+
We are now ready to perform the design.
−
We
+
−
are now ready to perform the design.
+
 
|-
 
|-
 
|| Point toward the '''Defaults '''button
 
|| Point toward the '''Defaults '''button
Line 400: Line 368:
 
|| Click on the '''Save '''button to save and exit the '''Design Preferences''' window.
 
|| Click on the '''Save '''button to save and exit the '''Design Preferences''' window.
 
|-
 
|-
−
|| Only narration
+
|| Cursor in the CAD window.
 
|| We are ready to perform the design with saved preferences.
 
|| We are ready to perform the design with saved preferences.
 
|-  
 
|-  
Line 419: Line 387:
 
|-
 
|-
 
|| Click on the '''Spacing Details button.'''
 
|| Click on the '''Spacing Details button.'''
−
|| Click on the '''Spacing Details button '''in the '''Output Dock '''under '''End Connection'''.
+
|| Click on the '''Spacing Details button '''in the '''Output Dock ''' under '''End Connection'''.
 
|-
 
|-
−
|| Point toward '''Bolt Rows (nos)'''
+
|| Point toward '''Bolt Rows (nos)'''.
 
|| The number of '''Bolt Rows''' is 2 on each '''gusset plate'''.
 
|| The number of '''Bolt Rows''' is 2 on each '''gusset plate'''.
 
|-
 
|-
−
|| Only narration
+
|| Point toward '''Bolt Rows (nos)'''.
 
|| This has not changed.
 
|| This has not changed.
 
|-
 
|-
−
|| Point toward '''Bolt Columns (nos)'''
+
|| Point toward '''Bolt Columns (nos)'''.
 
|| The number of '''Bolt Columns''' is now 12.
 
|| The number of '''Bolt Columns''' is now 12.
 
|-
 
|-
−
|| Only narration
+
|| Point toward '''Bolt Columns (nos)'''.
 
|| This has been reduced from 16 to 12.
 
|| This has been reduced from 16 to 12.
 
|-
 
|-
Line 439: Line 407:
 
|| There is a change in the total number of bolts after designing with special preferences.
 
|| There is a change in the total number of bolts after designing with special preferences.
 
|-
 
|-
−
|| Click on the close button
+
|| Click on the close button.
 
|| Click on the close button at the top right corner to exit the window.
 
|| Click on the close button at the top right corner to exit the window.
 
|-
 
|-
 
|| Point toward '''Capacity (kN)''' under '''Bolt Details''' output
 
|| Point toward '''Capacity (kN)''' under '''Bolt Details''' output
−
|| Also, notice the''' bolt capacity''' has changed to 26.98 '''kN'''.
+
|| Also, notice the''' bolt capacity''' has changed to 26.98 '''kilo Newton'''.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 454: Line 422:
 
Let us summarise.
 
Let us summarise.
 
|-  
 
|-  
−
|| '''Slide: Summary'''
+
|| '''Slide''':  
 +
 
 +
'''Summary'''
  
  
Line 466: Line 436:
  
 
|-
 
|-
−
|| '''Slide: Assignment'''
+
|| '''Slide''':  
 +
 
 +
Assignment'''
 
|| As an '''assignment''', do the following
 
|| As an '''assignment''', do the following
  
Line 477: Line 449:
  
 
|-
 
|-
−
|| '''Slide: '''About Spoken Tutorial Project
+
|| '''Slide''':
 +
 
 +
'''About Spoken Tutorial Project'''
 
|| The video at the following link summarizes the Spoken Tutorial Project.
 
|| The video at the following link summarizes the Spoken Tutorial Project.
  
Line 483: Line 457:
 
Please download and watch it.
 
Please download and watch it.
 
|-
 
|-
−
|| '''Slide:'''Spoken Tutorial Workshops
+
|| '''Slide''':
 +
 
 +
 
 +
'''Spoken Tutorial Workshops'''
 
|| The Spoken Tutorial Project team conducts workshops and gives certificates.
 
|| The Spoken Tutorial Project team conducts workshops and gives certificates.
  
Line 489: Line 466:
 
For more details, please write to us.
 
For more details, please write to us.
 
|-
 
|-
−
|| '''Slide:'''Answers for THIS Spoken Tutorial
+
|| '''Slide:
 +
 
 +
'''Answers for THIS Spoken Tutorial'''
 
|| Please post your timed queries in this forum.
 
|| Please post your timed queries in this forum.
 
|-
 
|-
−
|| '''Slide: '''FOSSEE Forum
+
|| '''Slide''':  
 +
 
 +
'''FOSSEE Forum
 
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question
 
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question
 
|-
 
|-
−
|| '''Slide: '''Sample Design Examples
+
|| '''Slide''':
−
 
+
−
 
+
  
 +
'''Sample Design Examples
  
 
[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
 
[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
Line 509: Line 489:
  
 
|-
 
|-
−
|| '''Slide: '''Acknowledgement
+
|| '''Slide''':  
 +
 
 +
'''Acknowledgement'''
 
|| The '''Spoken''' '''Tutorial''' project was established by the '''Ministry of Education''', Government of India
 
|| The '''Spoken''' '''Tutorial''' project was established by the '''Ministry of Education''', Government of India
 
|-
 
|-
−
|| '''Slide: '''Thank you
+
|| '''Slide''':  
 +
 
 +
'''Thank you'''
 
|| This is Anandajith TS, FOSSEE IIT Bombay signing off
 
|| This is Anandajith TS, FOSSEE IIT Bombay signing off
  

Latest revision as of 16:13, 1 November 2023

Title of the script: Specifying design preferences in Osdag

Author: Anandajith TS

Keywords: Osdag, member design, connection design, steel design optimisation, Tension member, Design Preference, bolt design, detailing, gusset plate, video tutorial


Visual Cue Narration
Slide

Title Slide

Welcome to the Spoken Tutorial on Specifying design preferences in Osdag.
Slide

Learning Objectives

In this tutorial, we will learn to,
  • Design preferences in Osdag
  • Define special preferences
  • Perform design using special preferences
  • Compare the design results


Slide

System Requirements

To record this tutorial, I am using
  • Windows 11 OS, and
  • Osdag v2021.02.a.a12f


Slide

Pre-requisites


https://spoken-tutorial.org

To follow this tutorial you should have,
  • Osdag installed on your system
  • Basic knowledge of structural steel design


The prerequisite tutorials are available on this website.

Slide

Code Files

  • The files used in this tutorial are available in the Code Files link
  • Please download and extract them
  • Make a copy and then use them while practising
Only narration The user interface of Osdag for Ubuntu Linux, and for Windows is the same.


Annotations are added to the tutorial if there are any differences.

Point to the home page of the Tension Member Design - Bolted to End Gusset module Switch to the home page of the Tension Member Design- Bolted to End Gusset module.
Point toward the Input Dock fields I have loaded the Preference hyphen sample hyphen design dot OSI file.
Only narration Please pause the tutorial and perform the same steps on your computer.
Click on the Design button Click on the Design button below to perform the design.
Only narration Osdag carries out the design.
Point toward the INFO message in the log message window The design is complete and safe.
Point toward the CAD window and the Output Dock The CAD window becomes active, and the Output Dock is populated with results.
Only narration Let us specify some design preferences and check for updated results.
Slide

Sample Design Example

Perform a design check by adopting the given design preferences:


Connector:

  • Material: E300 (Fe 440)



Bolt:

  • Type: Pre-tensioned
  • Hole Type: Over-sized
  • Slip factor: 0.48
Slide

Sample Design Example

Detailing:
  • Edge Preparation Method: machine-flame cut
  • Environment: Corrosive


Design:

  • Limit State Design
Switch back to Tension Member Design - Bolted to End Gusset module homepage Performing design with above preferences may change the design results completely.
Only narration Design Preference is an advanced feature.

It should be used after due consideration.

Click on the Spacing Details button. Click the Spacing Details button under End Connection in the Output Dock.
Point toward the Spacing Details window The Spacing Details window opens.
Point toward Bolt Rows (nos) Notice that the number of Bolt Rows is 2 on each gusset plate.
Point toward Bolt Columns (nos) And the number of Bolt Columns is 16.
Only narration This means that there are 32 bolts on each gusset plate or 16 bolts per Angle.
Only narration Let us see if the bolt configuration changes after designing with special preferences.
Click on the close button Click on the close button at the top right corner to exit the window.
Point toward Capacity (kN) under Bolt Details output Also, notice the bolt capacity for the given design.


It is 18.78 kilo Newton as of now.

Only narration Let us see if the bolt capacity changes after designing with special preferences.
Only narration Let us now define the preferences for our design.
Click on the Edit menu in the menu bar Click on the Edit menu in the menu bar and
Select Design Preferences Select Design Preferences from the list.
Point toward the Design Preference window The Design Preference window will open.
Only narration The Design Preference window is categorised into various sections.
Click on Angle Section Typically, these sections include;
  • Details of the selected member.


Click on Connector
  • Connector preferences.


Click on Bolt
  • Bolt preferences.


Click on Detailing
  • Detailing preferences, and


Click on Design
  • The design method preference.


Only narration Let's explore the sections and define the corresponding preferences individually.
Click on the Angle Section tab Click on the Angle Section tab to view the selected member details.
Point toward Designation, Section Profile and Conn_Location Here, section details like designation and the profile are shown.
Point toward Mechanical Properties Below section details, we see Mechanical Properties.
Point to the properties. These properties get populated based on inputs in the Input Dock and the codal provisions
Point toward Dimensions Dimensions of the selected section are listed under the Dimensions section.
Point to the dimensions. These dimensions are fetched from the Indian Standard, IS 808 database of Osdag.
Point toward the section image A detailed and representative cross-section drawing of the selected section is shown.
point to the 2D drawing. This 2D drawing is typical and has standard notations marked over it for better visualisation.
Point toward Section Properties The sectional properties corresponding to the selected section are listed under Section Properties.
Point toward Section Properties fields These properties are also fetched from the Osdag database at run-time.
Only narration For a user-defined section not present in the database, properties are calculated by Osdag internally.
Only narration The properties of this user-defined section are inserted into the database for reuse.
Only narration Users can add single or multiple custom sections to the Osdag database and use it in design.
Point toward Add button The Add button at the bottom allows to Add a single custom section to the database.
Point toward the Download xlsx file, and Import xlsx file buttons For adding multiple sections at once using an excel sheet, use the Download and Import xlsx buttons.
Point toward the Download xlsx file, and Import xlsx file buttons We will explore this feature in another tutorial.
Point toward the Clear button The Clear button will clear the user-defined inputs in the Design Preference window.
Click on the Connector tab Let us move to the Connector tab.
Point toward the Inputs fields Here, we see the Material properties of the connector material.
Point toward the Material drop-down menu E 250 (Fe 410 W)A is selected by default.
Point toward the Ultimate Strength and Yield Strength field The corresponding values of the ultimate and yield strengths are shown below.
Point to the material grade. We need to change the material grade to E300.
Click on the Material drop-down menu and select E300 (Fe 440) from the list Click on the Material drop-down menu and select E300 (Fe 440) from the list.
Point toward the Ultimate Strength and Yield Strength field Notice the values of the ultimate and yield strength are now updated automatically.
Click on the Bolt tab Let us now move to the Bolt tab.
Point toward Type and Hole Type The default bolt type is Pre-tensioned, and the Hole Type is Standard.
Point to the Hole type. The desired Hole Type is Over-sized.
Click on the Hole Type drop-down menu and select Over-sized from the list Click on the Hole Type drop-down menu and select Over-sized from the list.
Point to the slip factor value. Now, let us change the Slip factor to 0.48.
Click on the Slip factor drop-down menu, scroll and select 0.48 from the list Click on the Slip factor drop-down menu


Scroll down the list and select 0.48.

Point toward the Description text box A description of the slip factor values is shown in the Description text box.
Highlight IS 800 Table 20 The description is referred from the Indian Standard, IS 800, Table 20.
Highlight xi) Sand blasted surface 0.48 in the Description text box We see, for a slip factor of 0.48, the surface treatment is of Sand blasted type.
Point to the bolt preferences. We have defined preferences for the Bolt.
Click on the Detailing tab Let us now move to the Detailing tab.
Click on the Edge Preparation Method drop-down menu and select machine-flame cut from the list Click on the Edge Preparation Method drop-down menu and select machine-flame cut from the list.
Point toward the Gap textbox The Gap preference is not applicable here.

We will leave it as default.

Only narration In our design, the members are exposed to corrosive influences.


We need to incorporate this condition in the design.

Point toward the Are the Members Exposed to Corrosive Influences drop-down menu. Click on the Corrosive Influences drop-down menu and select Yes.
Point toward the Description text box The Description text box shows a description with reference to the corresponding IS 800 clauses
Point to the Description text box . Users may refer to this description for a better understanding of these design clauses.
Click on the Design tab Let us now move to the Design tab.
Point toward the Design Method drop-down menu We see the default Design Method is Limit State Design.
Only narration Osdag performs design using the Limit State Method.
Click on the Design Method drop-down menu Other methods of design are not available with this version.
Only narration We have defined all the preferences.

We are now ready to perform the design.

Point toward the Defaults button The Defaults button below sets the preferences to the default value.

Do not press this button after defining the preferences.

Point toward the Save button The Save button saves the defined preferences.
Click on the Save button Click on the Save button to save and exit the Design Preferences window.
Cursor in the CAD window. We are ready to perform the design with saved preferences.
Click on the Design button Click on the Design button again.
Only narration Osdag carries out the design.
Only narration The design process might take some time to complete.
Point toward the INFO message in the log message window The design is completed successfully.
Only narration Now, let us check if the design results have changed from that recorded previously
Click on the Spacing Details button. Click on the Spacing Details button in the Output Dock under End Connection.
Point toward Bolt Rows (nos). The number of Bolt Rows is 2 on each gusset plate.
Point toward Bolt Rows (nos). This has not changed.
Point toward Bolt Columns (nos). The number of Bolt Columns is now 12.
Point toward Bolt Columns (nos). This has been reduced from 16 to 12.
Only narration This means that now there are 24 bolts on each gusset plate or 12 bolts per Angle.
Only narration There is a change in the total number of bolts after designing with special preferences.
Click on the close button. Click on the close button at the top right corner to exit the window.
Point toward Capacity (kN) under Bolt Details output Also, notice the bolt capacity has changed to 26.98 kilo Newton.
Only narration Users can refer to other design outputs and compare the results similarly.
Only narration This brings us to the end of this tutorial.


Let us summarise.

Slide:

Summary


In this tutorial, we have:
  • Learnt design preferences in Osdag
  • Defined special preferences
  • Performed design using special preferences
  • Compared the design results


Slide:

Assignment

As an assignment, do the following


  • Go to the Tension Member Design - Welded to End Gusset module
  • Use the same input values as this tutorial wherever applicable
  • Explore and define various design preferences
  • Compare the results and make conclusions


Slide:

About Spoken Tutorial Project

The video at the following link summarizes the Spoken Tutorial Project.


Please download and watch it.

Slide:


Spoken Tutorial Workshops

The Spoken Tutorial Project team conducts workshops and gives certificates.


For more details, please write to us.

Slide:

Answers for THIS Spoken Tutorial

Please post your timed queries in this forum.
Slide:

FOSSEE Forum

For any general or technical questions on Osdag, visit the FOSSEE forum and post your question
Slide:

Sample Design Examples

https://osdag.fossee.in/resources/sample-design

  • The Osdag team at FOSSEE creates sample design examples for self-learning
  • These examples can be practiced using the Osdag software
  • For more details, please visit this link

https://osdag.fossee.in/resources/sample-design


Slide:

Acknowledgement

The Spoken Tutorial project was established by the Ministry of Education, Government of India
Slide:

Thank you

This is Anandajith TS, FOSSEE IIT Bombay signing off


Thanks for joining

Contributors and Content Editors

Anandajitht, Danish, Madhurig

Retrieved from "https://script.spoken-tutorial.org/index.php?title=Osdag/C3/Specifying-design-preferences-in-Osdag/English&oldid=56367"