Difference between revisions of "Osdag/C3/Handling-unsafe-designs-in-Osdag/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
 
+
'''Title of the script''': '''Handling unsafe designs in Osdag'''
'''Title of the script:''' Handling unsafe designs in Osdag
+
  
 
'''Author''': Monika Soni (script), Anandajith TS (recording)
 
'''Author''': Monika Soni (script), Anandajith TS (recording)
  
''Keywords:''' ''Video tutorial, Unsafe Design, Log Messages, Error, Warning, Info, Osdag'''
+
'''Keywords''': osdag, member design, connection design, steel design optimisation, tension member, unsafe design, log messages, error, warning, info, video tutorial.
  
  
Line 15: Line 14:
 
|-  
 
|-  
 
|| '''Slide: Title Slide'''
 
|| '''Slide: Title Slide'''
|| Welcome to the spoken tutorial on '''‘Handling unsafe designs in Osdag’.'''
+
|| Welcome to the spoken tutorial on '''Handling unsafe designs in Osdag'''.
 
|-  
 
|-  
 
|| '''Slide: Learning Objectives'''
 
|| '''Slide: Learning Objectives'''
|| In this tutorial, we will learn how to  
+
|| In this tutorial, we will learn how to,
* Interpret the '''log messages '''in '''Osdag'''
+
 
* Read '''ERROR,''' '''WARNING '''and '''INFO '''messages, and
+
* Interpret the '''log messages ''' in '''Osdag'''
* Rectify an '''unsafe '''design using '''log messages'''
+
* Read '''ERROR''', '''WARNING ''' and '''INFO ''' messages, and
 +
* Rectify an '''unsafe ''' design using '''log messages'''.
  
  
 
|-  
 
|-  
 
|| '''Slide: System Requirements'''
 
|| '''Slide: System Requirements'''
|| To record this tutorial, I am using
+
|| To record this tutorial, I am using,
* '''Windows 11 OS''', and
+
 
 +
* '''Windows 11 Operating System''', and
 
* '''Osdag v2021.02.a.a12f'''
 
* '''Osdag v2021.02.a.a12f'''
  
Line 33: Line 34:
 
|-  
 
|-  
 
|| '''Slide: Pre-requisites'''
 
|| '''Slide: Pre-requisites'''
 
 
 
 
  
  
 
[https://osdag.fossee.in/ https://spoken-tutorial.org]
 
[https://osdag.fossee.in/ https://spoken-tutorial.org]
 
|| To follow this tutorial you should have,
 
|| To follow this tutorial you should have,
* '''Osdag '''installed on your system
+
 
 +
* '''Osdag ''' installed on your system
 
* Basic knowledge of '''structural steel design'''
 
* Basic knowledge of '''structural steel design'''
  
 
+
The prerequisite tutorials are available on this website.
 
+
 
+
 
+
The prerequisite''' '''tutorials are available on this website.
+
 
|-  
 
|-  
 
|| Only narration
 
|| Only narration
|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and for '''Windows '''is the same.
+
|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and for '''Windows ''' is the same.
  
  
 
Annotations are added to the tutorial if there are any differences.
 
Annotations are added to the tutorial if there are any differences.
 
|-
 
|-
|| Point to the '''home page''' of the '''Tension Member Design >>''' Select '''Bolted to End Gusset module'''
+
|| Point to the '''home page''' of the '''Tension Member Design >>
|| Let us switch to the '''home page''' of '''Tension Member Design.'''
+
 
 +
''' Select '''Bolted to End Gusset module'''
 +
|| Let us switch to the '''home page''' of '''Tension Member Design'''.
  
Select''' Bolted to End Gusset module.'''
+
Select ''' Bolted to End Gusset module'''.
 
|-
 
|-
 
|| Point toward the '''Input Dock''' fields  
 
|| Point toward the '''Input Dock''' fields  
|| I have loaded the '''Logs underscore sample underscore design dot OSI '''file.
+
|| I have loaded the '''Logs underscore sample underscore design dot OSI ''' file.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
 
|| Please pause the tutorial and load the input file.
 
|| Please pause the tutorial and load the input file.
 
|-
 
|-
|| Click on the '''Design '''button
+
|| Click on the '''Design '''button.
|| Click on the '''Design '''button below to perform the design.
+
|| Click on the '''Design ''' button below to perform the design.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 74: Line 70:
 
|-
 
|-
 
|| Point toward the '''CAD window'''  
 
|| Point toward the '''CAD window'''  
|| Note that the '''CAD window''' is inactive, and the '''Output Dock''' are inactive.
+
|| Note that the '''CAD window''' is inactive.
 
|-
 
|-
 
|| Point toward the '''Output Dock'''
 
|| Point toward the '''Output Dock'''
Line 82: Line 78:
 
|| This is because the design is complete but '''unsafe'''.
 
|| This is because the design is complete but '''unsafe'''.
 
|-
 
|-
||
+
||Point to the '''Output Dock.'''
Point to the '''Output Dock.'''
+
|| Let us disable the '''Output Dock''' to maximise the '''log message window'''.
|| Let us disable the '''Output Dock''' to maximise the '''log messages window'''.
+
 
|-
 
|-
 
|| Click on the close '''Output Dock '''button
 
|| Click on the close '''Output Dock '''button
Line 93: Line 88:
 
|-
 
|-
 
|| Highlight the '''timestamp '''in the '''log messages'''
 
|| Highlight the '''timestamp '''in the '''log messages'''
|| The '''log messages''' are marked with a '''timestamp '''for the reference of the users.
+
|| The '''log messages''' are marked with a '''timestamp ''' for the reference of the users.
 
|-
 
|-
 
|| Highlight '''ERROR '''message
 
|| Highlight '''ERROR '''message
|| The '''ERROR '''message is marked in red and indicates the status of the design.
+
|| The '''ERROR ''' message is marked in red and indicates the status of the design.
  
  
In this case, the '''Design is unsafe.'''
+
In this case, the '''Design is unsafe'''.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
 
|| Let us rectify the design using the '''log messages''' and arrive at a safe design solution.
 
|| Let us rectify the design using the '''log messages''' and arrive at a safe design solution.
 
|-
 
|-
||  
+
|| Point to the message in blue colour.
Point to the message in blue colour.
+
|| The '''WARNING '''messages''' are marked in blue colour.
|| The '''WARNING '''messages''' '''are marked in Blue colour.
+
 
|-
 
|-
|| Highlight the '''WARNING '''message
+
|| Highlight the '''WARNING ''' message.
|| The '''WARNING '''message gives a '''warning '''pertaining to a specific design check.
+
|| The '''WARNING ''' message gives a '''warning ''' pertaining to a specific design check.
 
|-
 
|-
 
|| Highlight the '''WARNING '''message
 
|| Highlight the '''WARNING '''message
|| The '''WARNING '''message reads, that the tension force exceeds the tension capacity. '''.
+
|| The '''WARNING ''' message reads, that the tension force exceeds the tension capacity.  
 
|-
 
|-
||  
+
|| Point to the message.
Point to the message.
+
|| This means that the force exceeds the '''member capacity''' in tension.
|| This means that the force exceeds the member capacity in tension.
+
 
|-
 
|-
 
|| Point to the message.
 
|| Point to the message.
|| The '''INFO '''messages''' '''are marked in Green colour.
+
|| The '''INFO '''messages''' are marked in green colour.
 
|-
 
|-
 
|| Highlight the first '''INFO '''message
 
|| Highlight the first '''INFO '''message
|| The '''INFO '''message gives suggestions to rectify the unsafe design.
+
|| The '''INFO ''' message gives suggestions to rectify the unsafe design.
 
|-
 
|-
 
|| Highlight the last '''INFO '''message
 
|| Highlight the last '''INFO '''message
Line 128: Line 121:
 
|-
 
|-
 
|| Highlight the first '''INFO '''message
 
|| Highlight the first '''INFO '''message
|| The '''INFO '''message reads, '''‘Define member(s) with a higher cross sectional area.’'''
+
|| The '''INFO '''message reads, '''‘Define members with a higher cross sectional area’'''.
 
|-
 
|-
||
+
||Highlight '''80 x 80 x 8 '''in the message.
Highlight '''80 x 80 x 8 '''in the message.
+
 
|| This means we have to define a section with an area greater than '''80 x 80 x 8.'''
 
|| This means we have to define a section with an area greater than '''80 x 80 x 8.'''
 
|-
 
|-
Line 140: Line 132:
 
|| Click on the '''Section Size drop-down menu''' and select '''Customized'''.
 
|| Click on the '''Section Size drop-down menu''' and select '''Customized'''.
 
|-
 
|-
|| Double-click on '''80 x 80 x 8 '''in the '''Selected '''list
+
|| Double-click on '''80 x 80 x 8 ''' in the '''Selected ''' list
|| Double-click on '''80 x 80 x 8''' in the '''Selected '''list to deselect the section.
+
|| Double-click on '''80 x 80 x 8''' in the '''Selected ''' list to deselect the section.
 
|-
 
|-
|| Scroll down in the '''Available '''list and double click on '''90 x 90 x 8'''
+
|| Scroll down in the '''Available ''' list and double click on '''90 x 90 x 8'''.
 
|| Now, scroll down in the '''Available '''list.
 
|| Now, scroll down in the '''Available '''list.
  
  
Find '''90 x 90 x 8 '''and double-click on it to select the section.
+
Find '''90 x 90 x 8 ''' and double-click on it to select the section.
 
|-
 
|-
|| Click on the '''Submit '''button
+
|| Click on the '''Submit ''' button.
|| Click on the '''Submit '''button below to confirm and exit.
+
|| Click on the '''Submit ''' button below to confirm and exit.
 
|-
 
|-
 
|| Click on the '''Design '''button
 
|| Click on the '''Design '''button
|| Then, click on the '''Design '''button below to perform the design.
+
|| Then, click on the '''Design ''' button below to perform the design.
 
|-
 
|-
 
|| Point to the messages.
 
|| Point to the messages.
|| We see '''ERROR '''and '''WARNING '''messages again, as the design is still '''unsafe'''.
+
|| We see '''ERROR ''' and '''WARNING ''' messages again, as the design is still '''unsafe'''.
 
|-
 
|-
 
|| Highlight the '''WARNING '''message
 
|| Highlight the '''WARNING '''message
 
|| The '''WARNING '''message reads, that the tension force exceeds the tension capacity.
 
|| The '''WARNING '''message reads, that the tension force exceeds the tension capacity.
 
|-
 
|-
||  
+
|| Point to the messages.
Point to the messages.
+
|| Here, the sectional area is satisfied but the plate thickness is less.
|| Here, the section area is satisfied but the plate thickness is less.
+
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 171: Line 162:
 
|| Click on the '''Thickness drop-down menu '''and select '''Customized'''.
 
|| Click on the '''Thickness drop-down menu '''and select '''Customized'''.
 
|-
 
|-
|| Double-click on '''12 '''in the '''Selected '''list
+
|| Double-click on '''12 ''' in the '''Selected '''list
|| Double-click on '''12 '''in the '''Selected '''list to deselect the plate.
+
|| Double-click on 12 in the '''Selected ''' list to deselect the plate.
 
|-
 
|-
 
|| From the '''Available '''list double-click on '''16'''
 
|| From the '''Available '''list double-click on '''16'''
|| Now, from the '''Available '''list double-click on '''16''' to select the plate.
+
|| Now, from the '''Available ''' list double-click on 16 to select the plate.
 
|-
 
|-
|| Click on the '''Submit '''button
+
|| Click on the '''Submit ''' button.
 
|| Click on the '''Submit '''button below to confirm and exit.
 
|| Click on the '''Submit '''button below to confirm and exit.
 
|-
 
|-
|| Click on the '''Design '''button
+
|| Click on the '''Design ''' button.
|| Again, click on the '''Design '''button below to perform the design.
+
|| Again, click on '''Design '''button below to perform the design.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 187: Line 178:
 
|-
 
|-
 
|| Highlight the fourth '''INFO '''message
 
|| Highlight the fourth '''INFO '''message
|| The '''INFO '''message reads, '''‘Overall bolted tension member design is safe.’'''.
+
|| The '''INFO '''message reads, '''‘Overall bolted tension member design is safe’'''.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 193: Line 184:
 
|-
 
|-
 
|| Highlight the third '''INFO '''message
 
|| Highlight the third '''INFO '''message
|| If there is scope to optimize the design, '''Osdag '''will display additional '''INFO '''messages.
+
|| If there is scope to optimize the design, '''Osdag ''' will display additional '''INFO ''' messages.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 207: Line 198:
 
Let us summarise.
 
Let us summarise.
 
|-  
 
|-  
|| '''Slide: Summary'''
+
|| '''Slide''':
  
 +
'''Summary'''
  
  
|| In this tutorial, we have
+
|| In this tutorial, we have,
 +
 
 
* Interpreted the '''log messages'''
 
* Interpreted the '''log messages'''
 
* Read '''ERROR,''' '''WARNING '''and '''INFO '''messages
 
* Read '''ERROR,''' '''WARNING '''and '''INFO '''messages
Line 219: Line 212:
 
|-
 
|-
 
|| '''Slide: Assignment'''
 
|| '''Slide: Assignment'''
|| As an '''assignment''', do the following
+
|| As an '''assignment''', do the following,
 +
 
 
* For the same design example
 
* For the same design example
 
** Read the '''INFO '''messages, and  
 
** Read the '''INFO '''messages, and  
Line 230: Line 224:
  
  
Please download and watch it
+
Please download and watch it.
 
|-
 
|-
 
|| '''Slide:Spoken Tutorial Workshops'''
 
|| '''Slide:Spoken Tutorial Workshops'''
|| The Spoken Tutorial Project team conducts workshops and gives certificates
+
|| The Spoken Tutorial Project team conducts workshops and gives certificates.
  
  
Line 239: Line 233:
 
|-
 
|-
 
|| '''Slide:Answers for THIS Spoken Tutorial'''
 
|| '''Slide:Answers for THIS Spoken Tutorial'''
|| Please post your timed queries in this forum
+
|| Please post your timed queries in this forum.
 
|-
 
|-
 
|| '''Slide: FOSSEE Forum'''
 
|| '''Slide: FOSSEE Forum'''
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question
+
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
 
|-
 
|-
 
|| '''Slide: Sample Design Examples'''
 
|| '''Slide: Sample Design Examples'''
 
 
  
  

Latest revision as of 13:05, 11 October 2023

Title of the script: Handling unsafe designs in Osdag

Author: Monika Soni (script), Anandajith TS (recording)

Keywords: osdag, member design, connection design, steel design optimisation, tension member, unsafe design, log messages, error, warning, info, video tutorial.


Visual Cue Narration
Slide: Title Slide Welcome to the spoken tutorial on Handling unsafe designs in Osdag.
Slide: Learning Objectives In this tutorial, we will learn how to,
  • Interpret the log messages in Osdag
  • Read ERROR, WARNING and INFO messages, and
  • Rectify an unsafe design using log messages.


Slide: System Requirements To record this tutorial, I am using,
  • Windows 11 Operating System, and
  • Osdag v2021.02.a.a12f


Slide: Pre-requisites


https://spoken-tutorial.org

To follow this tutorial you should have,
  • Osdag installed on your system
  • Basic knowledge of structural steel design

The prerequisite tutorials are available on this website.

Only narration The user interface of Osdag for Ubuntu Linux, and for Windows is the same.


Annotations are added to the tutorial if there are any differences.

Point to the home page of the Tension Member Design >>

Select Bolted to End Gusset module

Let us switch to the home page of Tension Member Design.

Select Bolted to End Gusset module.

Point toward the Input Dock fields I have loaded the Logs underscore sample underscore design dot OSI file.
Only narration Please pause the tutorial and load the input file.
Click on the Design button. Click on the Design button below to perform the design.
Only narration Osdag carries out the design.
Point toward the CAD window Note that the CAD window is inactive.
Point toward the Output Dock The Output Dock is not populated with the output values.
Only narration This is because the design is complete but unsafe.
Point to the Output Dock. Let us disable the Output Dock to maximise the log message window.
Click on the close Output Dock button Click on the close button at the top right corner of the Output Dock.
Point toward the Log messages We see the colour-coded log messages pertaining to the design.
Highlight the timestamp in the log messages The log messages are marked with a timestamp for the reference of the users.
Highlight ERROR message The ERROR message is marked in red and indicates the status of the design.


In this case, the Design is unsafe.

Only narration Let us rectify the design using the log messages and arrive at a safe design solution.
Point to the message in blue colour. The WARNING messages are marked in blue colour.
Highlight the WARNING message. The WARNING message gives a warning pertaining to a specific design check.
Highlight the WARNING message The WARNING message reads, that the tension force exceeds the tension capacity.
Point to the message. This means that the force exceeds the member capacity in tension.
Point to the message. The INFO messages are marked in green colour.
Highlight the first INFO message The INFO message gives suggestions to rectify the unsafe design.
Highlight the last INFO message It also suggests where the design check or a trial design has ended.
Highlight the first INFO message The INFO message reads, ‘Define members with a higher cross sectional area’.
Highlight 80 x 80 x 8 in the message. This means we have to define a section with an area greater than 80 x 80 x 8.
Only narration Let us define a new section.
Click on the Section Size drop-down menu Click on the Section Size drop-down menu and select Customized.
Double-click on 80 x 80 x 8 in the Selected list Double-click on 80 x 80 x 8 in the Selected list to deselect the section.
Scroll down in the Available list and double click on 90 x 90 x 8. Now, scroll down in the Available list.


Find 90 x 90 x 8 and double-click on it to select the section.

Click on the Submit button. Click on the Submit button below to confirm and exit.
Click on the Design button Then, click on the Design button below to perform the design.
Point to the messages. We see ERROR and WARNING messages again, as the design is still unsafe.
Highlight the WARNING message The WARNING message reads, that the tension force exceeds the tension capacity.
Point to the messages. Here, the sectional area is satisfied but the plate thickness is less.
Only narration Let us define a thicker gusset plate.
Click on the Thickness drop-down menu Click on the Thickness drop-down menu and select Customized.
Double-click on 12 in the Selected list Double-click on 12 in the Selected list to deselect the plate.
From the Available list double-click on 16 Now, from the Available list double-click on 16 to select the plate.
Click on the Submit button. Click on the Submit button below to confirm and exit.
Click on the Design button. Again, click on Design button below to perform the design.
Only narration Osdag carries out the design.
Highlight the fourth INFO message The INFO message reads, ‘Overall bolted tension member design is safe’.
Only narration This means that the design is complete and successful.
Highlight the third INFO message If there is scope to optimize the design, Osdag will display additional INFO messages.
Only narration But, this does not mean that the design is unsafe.
Only narration Optimum design can be achieved by defining more inputs for the section, connectors, etc.
Only narration This brings us to the end of this tutorial.


Let us summarise.

Slide:

Summary


In this tutorial, we have,
  • Interpreted the log messages
  • Read ERROR, WARNING and INFO messages
  • Rectified an unsafe design using log messages


Slide: Assignment As an assignment, do the following,
  • For the same design example
    • Read the INFO messages, and
    • Optimize the design solution by referring the suggestions in the INFO messages


Slide: About Spoken Tutorial Project The video at the following link summarizes the Spoken Tutorial Project


Please download and watch it.

Slide:Spoken Tutorial Workshops The Spoken Tutorial Project team conducts workshops and gives certificates.


For more details, please write to us

Slide:Answers for THIS Spoken Tutorial Please post your timed queries in this forum.
Slide: FOSSEE Forum For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
Slide: Sample Design Examples


https://osdag.fossee.in/resources/sample-design


Slide: Acknowledgement The Spoken Tutorial project is funded by the Ministry of Education, Government of India
Slide: Thank you This is Anandajith TS, IIT Bombay signing off


Thanks for joining

Contributors and Content Editors

Anandajitht, Danish, Madhurig