Difference between revisions of "Osdag/C3/Save-and-Import-input-values-in-Osdag/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
  
  
−
'''Title of the script:''' Save and Import input values in Osdag  
+
'''Title of the script''': ''' Save and Import input values in Osdag '''
  
 
'''Author''': Monika Soni (script), Anandajith TS (recording)
 
'''Author''': Monika Soni (script), Anandajith TS (recording)
  
−
'''Keywords:''' '''Osdag, Save inputs, OSI file, Import inputs, Video tutorial.'''
+
'''Keywords''': Osdag, Save inputs, OSI file, Import inputs, Video tutorial.
  
  
 
{| border=1
 
{| border=1
 
|-  
 
|-  
−
|| Visual Cue
+
|| '''Visual Cue'''
−
|| Narration
+
|| '''Narration'''
 
|-  
 
|-  
−
|| '''Slide: '''Title Slide
+
|| '''Slide''':  
−
|| Welcome to the spoken tutorial on '''‘Save and Import Input Values in Osdag’.'''
+
 
 +
'''Title Slide'''
 +
|| Welcome to the spoken tutorial on '''‘Save and Import Input Values in Osdag’'''.
 
|-  
 
|-  
−
|| '''Slide: '''Learning Objectives
+
|| '''Slide:  
−
|| In this tutorial, we will learn how to,* '''Save input '''values in '''Osdag'''
+
 
 +
'''Learning Objectives'''
 +
|| In this tutorial, we will learn how to,
 +
* '''Save input '''values in '''Osdag'''
 
* Import '''OSI file '''and perform design
 
* Import '''OSI file '''and perform design
−
 
  
 
|-  
 
|-  
−
|| '''Slide: '''System Requirements
+
|| '''Slide:  
−
|| To record this tutorial, I am using,* '''Windows 11 OS''', and
+
−
* '''Osdag v2021.02.a.a12f'''
+
  
 +
'''System Requirements'''
 +
|| To record this tutorial, I am using,
 +
* '''Windows 11 OS''', and
 +
* '''Osdag version 2021(2021.02.a.a12f)'''
  
 
|-  
 
|-  
−
|| '''Slide:''' Pre-requisites
+
|| '''Slide''':
−
 
+
−
 
+
−
 
+
−
 
+
  
 +
''' Pre-requisites'''
  
 
[https://osdag.fossee.in/ https://spoken-tutorial.org]
 
[https://osdag.fossee.in/ https://spoken-tutorial.org]
−
|| To follow this tutorial you should have,* '''Osdag''' installed on your system
+
|| To follow this tutorial you should have,
 +
* '''Osdag''' installed on your system
 
* Basic knowledge of '''structural steel design'''
 
* Basic knowledge of '''structural steel design'''
  
  
−
 
+
The '''prerequisite''' tutorials are available on this website
−
 
+
−
 
+
−
The prerequisite''' '''tutorials are available on this website
+
 
|-  
 
|-  
 
|| Only narration
 
|| Only narration
−
|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and for '''Windows '''is the same.
+
|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and for '''Windows ''' is the same.
  
  
Line 54: Line 55:
 
|| Let us perform a '''sample design''' and understand how to '''Save '''and '''Import '''inputs.
 
|| Let us perform a '''sample design''' and understand how to '''Save '''and '''Import '''inputs.
 
|-  
 
|-  
−
|| '''Slide: '''Sample Design Example
+
|| '''Slide''':
−
|| * '''Design''' a '''Tension Member''' with a '''bolted end connection'''
+
−
 
+
−
* The member carries a '''factored axial force '''of '''600 kN'''
+
  
 +
'''Sample Design Example'''
 +
||
 +
* '''Design''' a '''Tension Member''' with a '''bolted end connection'''
  
 +
* The member carries a '''factored axial force '''of '''600 kN'''.
  
 
Perform a '''design check''' by adopting the given '''design '''specifications:
 
Perform a '''design check''' by adopting the given '''design '''specifications:
 
|-  
 
|-  
−
|| '''Slide: '''Sample Design Example
+
|| '''Slide''':  
−
|| '''Section:'''*
+
 
−
** '''Profile: ''' '''Star Angles'''
+
'''Sample Design Example'''
 +
||
 +
* '''Section:'''  
 +
** '''Profile: ''' '''Star Angles'''
 
** '''Connection Location: Long Leg'''
 
** '''Connection Location: Long Leg'''
 
** '''Section Size: 80 x 80 x 8'''
 
** '''Section Size: 80 x 80 x 8'''
−
** '''Material Grade: E 250 (Fe 410 W)A'''
+
** '''Material Grade: E 250(Fe 410 W)A'''
 
** '''Length: 3200 mm'''
 
** '''Length: 3200 mm'''
−
 
−
 
−
 
  
 
|-  
 
|-  
−
|| '''Slide''': Sample design example
+
|| '''Slide''':  
−
|| '''End Connection:'''* '''Connector: '''
+
−
** '''Type: Bolted'''
+
−
** '''Diameter: 16'''
+
−
** '''Bolt Type: Friction Grip Bolt'''
+
−
** '''Grade: 8.8'''
+
−
* '''Gusset Plate: '''
+
−
** '''Thickness: 12 mm'''
+
−
 
+
−
 
+
  
 +
'''Sample Design example'''
 +
||
 +
* '''End Connection:'''
 +
** '''Connector: '''
 +
*** '''Type: Bolted'''
 +
*** '''Diameter: 16'''
 +
*** '''Bolt Type: Friction Grip Bolt'''
 +
*** '''Grade: 8.8'''
 +
** '''Gusset Plate:'''
 +
*** '''Thickness: 12 mm'''
  
 
|-
 
|-
 
|| Point to the '''home page''' of the '''Tension Member Design - Bolted to End Gusset module'''
 
|| Point to the '''home page''' of the '''Tension Member Design - Bolted to End Gusset module'''
−
|| Switch to the '''home page''' of the '''Tension Member Design - Bolted to End Gusset module.'''
+
|| Switch to the '''home page''' of the '''Tension Member Design - Bolted to End Gusset module'''.
 
|-  
 
|-  
 
|| Cursor in the Input Dock.
 
|| Cursor in the Input Dock.
−
|| Let us start filling the inputs for our''' sample design example'''.
+
|| Let us start filling the inputs for our ''' sample design example'''.
 
|-  
 
|-  
 
|| Cursor on different members.
 
|| Cursor on different members.
Line 103: Line 106:
 
Select '''Star Angles '''from the list.
 
Select '''Star Angles '''from the list.
 
|-  
 
|-  
−
|| Click on the '''Conn_Location '''drop-down menu and select '''Long Leg.'''
+
|| Click on the '''Conn_Location ''' drop-down menu,
 +
 
 +
and select '''Long Leg.'''
 
|| Click on the '''Conn_Location''' '''drop-down menu''' and select '''Long Leg'''.
 
|| Click on the '''Conn_Location''' '''drop-down menu''' and select '''Long Leg'''.
 
|-  
 
|-  
−
|| Click on the '''Section Size''' '''drop-down menu''' and select '''Customized.'''
+
|| Click on the '''Section Size''' '''drop-down menu''',
 +
 
 +
and select '''Customized'''.
 
|| Click on the '''Section Size''' drop-down menu and select '''Customized'''.
 
|| Click on the '''Section Size''' drop-down menu and select '''Customized'''.
 
|-
 
|-
Line 143: Line 150:
 
|-
 
|-
 
|| Click on the '''<< '''button
 
|| Click on the '''<< '''button
−
|| Click on the fourth '''button''' to '''unselect '''all the diameters at once.
+
|| Click on the fourth '''button''' to '''unselect ''' all the diameters at once.
 
|-  
 
|-  
 
|| Double click on '''16'''
 
|| Double click on '''16'''
Line 151: Line 158:
 
|| Click on the '''Submit button '''below to save and exit.
 
|| Click on the '''Submit button '''below to save and exit.
 
|-  
 
|-  
−
|| Click the '''Type drop-down menu''' and select '''Friction Grip Bolt'''
+
|| Click the '''Type drop-down menu'''  
 +
 
 +
and select '''Friction Grip Bolt'''
 
|| From the '''Type drop-down menu''', select '''Friction Grip Bolt'''.
 
|| From the '''Type drop-down menu''', select '''Friction Grip Bolt'''.
 
|-  
 
|-  
Line 160: Line 169:
 
|| Click on the '''Property Class drop-down menu''' and select '''Customized.'''
 
|| Click on the '''Property Class drop-down menu''' and select '''Customized.'''
 
|-  
 
|-  
−
|| Double click on '''8.8'''
+
||Click the '''<< ''' fourth  button.
−
|| From the '''Available '''list of grades, double click on '''8.8''' to select it.
+
 
 +
Double click on '''8.8'''
 +
 
 +
 
 +
|| Click on the fourth button to unselect all the diameters at once.
 +
 
 +
From the '''Available '''list of grades, double click on '''8.8''' to select it.
 
|-  
 
|-  
 
|| Click '''Submit'''
 
|| Click '''Submit'''
−
|| Click on the '''Submit button '''below to save and exit.
+
|| Click on the '''Submit button ''' below to save and exit.
 
|-  
 
|-  
 
|| Click on the '''Thickness drop-down menu''' and select '''Customized'''
 
|| Click on the '''Thickness drop-down menu''' and select '''Customized'''
−
|| Now, click on the '''Thickness drop-down menu''' and select '''Customized.'''
+
|| Now, click on the '''Thickness drop-down menu''' and select '''Customized'''.
 
|-  
 
|-  
−
|| Double click on '''12'''
+
||Click the '''<< ''' fourth  button.
−
|| From the '''Available '''list of plates, double click on '''12''' to select it.
+
 
 +
 
 +
Double click on '''12'''
 +
|| Click on the fourth button to unselect all the diameters at once.
 +
 
 +
From the '''Available '''list of plates, double click on '''12''' to select it.
 
|-  
 
|-  
−
|| Click '''Submit'''
+
|| Click '''Submit'''.
−
|| Click on the '''Submit button '''below to save and exit.
+
|| Click on the '''Submit button ''' below to save and exit.
 
|-  
 
|-  
 
|| Move the Cursor on all the Input values.
 
|| Move the Cursor on all the Input values.
 
|| We have now entered the inputs correctly.
 
|| We have now entered the inputs correctly.
 
|-  
 
|-  
−
|| Only narration
+
|| Only narration.
 
|| '''Osdag '''allows the user to save the inputs as an '''OSI '''file.
 
|| '''Osdag '''allows the user to save the inputs as an '''OSI '''file.
  
  
 
The '''OSI '''file can be loaded back into '''Osdag '''for faster retrieval of inputs.
 
The '''OSI '''file can be loaded back into '''Osdag '''for faster retrieval of inputs.
−
|-
 
−
|| Only narration
 
−
|| Do not edit the '''OSI''' file manually, as it will get corrupted.
 
 
|-  
 
|-  
 
|| Only narration
 
|| Only narration
Line 200: Line 217:
 
|-  
 
|-  
 
|| Point toward the '''Osdag_Workspace folder'''
 
|| Point toward the '''Osdag_Workspace folder'''
−
|| I have already created a '''folder '''named '''Osdag_Workspace''' on my '''desktop'''.
+
|| I have already created a '''folder '''named '''Osdag_Workspace''' on my '''Desktop'''.
 
|-  
 
|-  
 
|| Only narration
 
|| Only narration
 
|| Users can create a folder with a suitable name according to their convenience.  
 
|| Users can create a folder with a suitable name according to their convenience.  
 
|-  
 
|-  
−
|| Double click on the '''Osdag-workspace folder'''
+
|| Double click on the '''Osdag_workspace folder'''
−
|| I will double click on the '''Osdag hyphen workspace folder '''to open and select it.
+
|| I will double click on the '''Osdag underscore workspace folder ''' to open and select it.
 
|-  
 
|-  
−
|| Type '''Input-sample-design '''in the '''File name textbox'''
+
|| Type '''Input-sample-design ''' in the '''File name textbox'''
 
|| Now, let us specify a file name in the '''File name textbox '''below.
 
|| Now, let us specify a file name in the '''File name textbox '''below.
−
 
  
 
I will edit the file name to '''Input hyphen sample hyphen design.'''
 
I will edit the file name to '''Input hyphen sample hyphen design.'''
Line 221: Line 237:
 
|-  
 
|-  
 
|| Click on the '''Save button'''
 
|| Click on the '''Save button'''
−
|| Now, click on the '''Save button '''to save the '''OSI '''file and exit the '''Save Design window.'''
+
|| Now, click on the '''Save button '''to save the '''OSI '''file and exit the '''Save Design window'''
 
|-  
 
|-  
 
|| Only narration
 
|| Only narration
 
|| We can use this saved '''OSI '''file to retrieve the inputs and perform the design.
 
|| We can use this saved '''OSI '''file to retrieve the inputs and perform the design.
−
 
  
 
It can also be shared amongst peers for checking the design.
 
It can also be shared amongst peers for checking the design.
Line 247: Line 262:
 
|| The '''Open Design window''' will open.
 
|| The '''Open Design window''' will open.
 
|-  
 
|-  
−
|| Point toward the '''Osdag-workspace folder'''
+
|| Point toward the '''Osdag_workspace folder'''
−
|| I have saved the '''OSI '''file in the '''Osdag-workspace''' folder.
+
|| I have saved the '''OSI '''file in the '''Osdag underscore workspace''' folder.
 
|-  
 
|-  
−
|| Double click on the '''Osdag-workspace folder '''and click on '''Input-sample-design.OSI '''file
+
|| Double click on the '''Osdag_workspace folder '''and click on '''Input-sample-design.OSI '''file
−
 
+
|| Open the '''Osdag underscore workspace folder '''and select '''Input hyphen sample hyphen design.OSI '''file.
−
 
+
−
 
+
−
|| Open the '''Osdag-workspace folder '''and select '''Input-sample-design.OSI '''file.
+
 
|-  
 
|-  
 
|| Click on the '''Open button'''
 
|| Click on the '''Open button'''
Line 277: Line 289:
 
The status of the design is '''Unsafe'''.
 
The status of the design is '''Unsafe'''.
 
|-  
 
|-  
−
|| Only narration
+
−
|| This way '''Osdag '''has finished performing the '''design check '''successfully.
+
−
|-
+
 
|| Only narration
 
|| Only narration
 
|| We will see how to rectify '''unsafe design''' in the next tutorial.
 
|| We will see how to rectify '''unsafe design''' in the next tutorial.
Line 286: Line 296:
 
|| This brings us to the end of this tutorial.
 
|| This brings us to the end of this tutorial.
 
|-
 
|-
−
|| '''Slide''': Summary
+
|| '''Slide''':  
−
|| In this tutorial, we have* '''Saved input '''values
+
 
 +
'''Summary'''
 +
|| In this tutorial, we have
 +
* '''Saved input '''values
 
* Imported '''OSI file '''and performed design
 
* Imported '''OSI file '''and performed design
  
  
 
|-
 
|-
−
|| '''Slide: '''Assignment
+
|| '''Slide''':  
−
|| As an '''assignment''', do the following* Open '''Welded to End Gusset''' module of the '''Tension Member''' module
+
 
 +
'''Assignment'''
 +
|| As an '''assignment''', do the following
 +
* Open '''Welded to End Gusset''' module of the '''Tension Member''' module
 
* Give your inputs
 
* Give your inputs
 
* Save the '''OSI '''file  
 
* Save the '''OSI '''file  
 +
 +
 +
|-
 +
|| '''Slide''':
 +
 +
'''Assignment'''
 +
||
 
* Check if the design is '''safe '''or '''unsafe'''
 
* Check if the design is '''safe '''or '''unsafe'''
  
  
 
|-
 
|-
−
|| '''Slide: '''About Spoken Tutorial Project
+
|| '''Slide''':  
 +
 
 +
'''About Spoken Tutorial Project'''
 
|| The video at the following link summarizes the Spoken Tutorial Project
 
|| The video at the following link summarizes the Spoken Tutorial Project
  
Line 306: Line 331:
 
Please download and watch it
 
Please download and watch it
 
|-
 
|-
−
|| '''Slide:'''Spoken Tutorial Workshops
+
|| '''Slide''':
 +
 
 +
'''Spoken Tutorial Workshops'''
 
|| The Spoken Tutorial Project team conducts workshops and gives certificates
 
|| The Spoken Tutorial Project team conducts workshops and gives certificates
  
Line 312: Line 339:
 
For more details, please write to us
 
For more details, please write to us
 
|-
 
|-
−
|| '''Slide:'''Answers for THIS Spoken Tutorial
+
|| '''Slide''':
 +
 
 +
'''Answers for THIS Spoken Tutorial'''
 
|| Please post your timed queries in this forum
 
|| Please post your timed queries in this forum
 
|-
 
|-
−
|| '''Slide: '''FOSSEE Forum
+
|| '''Slide''':  
−
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question
+
 
 +
'''FOSSEE Forum'''
 +
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
 
|-
 
|-
−
|| '''Slide: '''Sample Design Examples
+
|| '''Slide''':
−
 
+
  
 +
'''Sample Design Examples'''
  
  
 
[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
 
[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
−
|| * The '''Osdag '''team at '''FOSSEE '''creates '''sample design examples''' for self-learning
+
||  
 +
* The '''Osdag '''team at '''FOSSEE '''creates '''sample design examples''' for self-learning
 
* These examples can be practised using the '''Osdag''' '''software'''
 
* These examples can be practised using the '''Osdag''' '''software'''
−
* For more details, please visit this link [https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
+
* For more details, please visit this link  
 +
 
 +
[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
  
  
 
|-
 
|-
−
|| '''Slide: '''Acknowledgement
+
|| '''Slide''':  
 +
 
 +
'''Acknowledgement'''
 
|| The '''Spoken''' '''Tutorial''' project is funded by the '''Ministry of Education''', Government of India
 
|| The '''Spoken''' '''Tutorial''' project is funded by the '''Ministry of Education''', Government of India
 
|-
 
|-
−
|| '''Slide: '''Thank you
+
|| '''Slide''':  
 +
 
 +
'''Thank you'''
 
|| This is '''Anandajith TS''', FOSSEE IIT Bombay signing off
 
|| This is '''Anandajith TS''', FOSSEE IIT Bombay signing off
  
  
−
Thanks for joining
+
Thanks for joining.
 
|-
 
|-
 
|}
 
|}

Latest revision as of 13:17, 8 August 2023


Title of the script: Save and Import input values in Osdag

Author: Monika Soni (script), Anandajith TS (recording)

Keywords: Osdag, Save inputs, OSI file, Import inputs, Video tutorial.


Visual Cue Narration
Slide:

Title Slide

Welcome to the spoken tutorial on ‘Save and Import Input Values in Osdag’.
Slide:

Learning Objectives

In this tutorial, we will learn how to,
  • Save input values in Osdag
  • Import OSI file and perform design
Slide:

System Requirements

To record this tutorial, I am using,
  • Windows 11 OS, and
  • Osdag version 2021(2021.02.a.a12f)
Slide:

Pre-requisites

https://spoken-tutorial.org

To follow this tutorial you should have,
  • Osdag installed on your system
  • Basic knowledge of structural steel design


The prerequisite tutorials are available on this website

Only narration The user interface of Osdag for Ubuntu Linux, and for Windows is the same.


Annotations are added to the tutorial if there are any differences.

Only narration Let us perform a sample design and understand how to Save and Import inputs.
Slide:

Sample Design Example

  • Design a Tension Member with a bolted end connection
  • The member carries a factored axial force of 600 kN.

Perform a design check by adopting the given design specifications:

Slide:

Sample Design Example

  • Section:
    • Profile: Star Angles
    • Connection Location: Long Leg
    • Section Size: 80 x 80 x 8
    • Material Grade: E 250(Fe 410 W)A
    • Length: 3200 mm
Slide:

Sample Design example

  • End Connection:
    • Connector: 
      • Type: Bolted
      • Diameter: 16
      • Bolt Type: Friction Grip Bolt
      • Grade: 8.8
    • Gusset Plate:
      • Thickness: 12 mm
Point to the home page of the Tension Member Design - Bolted to End Gusset module Switch to the home page of the Tension Member Design - Bolted to End Gusset module.
Cursor in the Input Dock. Let us start filling the inputs for our sample design example.
Cursor on different members. We need to specify the member details first.
Click on the Section Profile drop-down menu and select the Star Angles option. Click on the Section Profile drop-down menu.


Select Star Angles from the list.

Click on the Conn_Location drop-down menu,

and select Long Leg.

Click on the Conn_Location drop-down menu and select Long Leg.
Click on the Section Size drop-down menu,

and select Customized.

Click on the Section Size drop-down menu and select Customized.
Click on the << button Click on the fourth button to unselect all the sections at once.
Point toward the Available list Now, we have to select 80 x 80 x 8 from the Available list of sections.
Scroll down in the Available list and double click on 80 x 80 x 8 Scroll down in the Available list and search for 80 x 80 x 8.


Double click on 80 x 80 x 8 to select it.

Click Submit Click on the Submit button below to save and exit the Customized window.
Click on the Material drop-down menu and select E 250 (Fe 410 W)A. Now, click on the Material drop-down menu and select E 250 (Fe 410 W)A.
Type 3200 in the Length textbox Specify the length of the member as 3200 mm.
Only narration We have defined member details.


Let us now proceed with Load and Connector inputs.

Type 600 in the Axial textbox Enter, factored axial load as 600 kN.
Click on the Diameter drop-down menu and select Customized. Click on the Diameter drop-down menu and select the Customized option.
Click on the << button Click on the fourth button to unselect all the diameters at once.
Double click on 16 Now, from the Available list of diameters, double click on 16 to select it.
Click Submit Click on the Submit button below to save and exit.
Click the Type drop-down menu

and select Friction Grip Bolt

From the Type drop-down menu, select Friction Grip Bolt.
Only narration Let us now specify a corresponding bolt grade.
Click on the Property Class drop-down menu and select Customized Click on the Property Class drop-down menu and select Customized.
Click the << fourth button.

Double click on 8.8


Click on the fourth button to unselect all the diameters at once.

From the Available list of grades, double click on 8.8 to select it.

Click Submit Click on the Submit button below to save and exit.
Click on the Thickness drop-down menu and select Customized Now, click on the Thickness drop-down menu and select Customized.
Click the << fourth button.


Double click on 12

Click on the fourth button to unselect all the diameters at once.

From the Available list of plates, double click on 12 to select it.

Click Submit. Click on the Submit button below to save and exit.
Move the Cursor on all the Input values. We have now entered the inputs correctly.
Only narration. Osdag allows the user to save the inputs as an OSI file.


The OSI file can be loaded back into Osdag for faster retrieval of inputs.

Only narration Let us save an OSI file for the given sample design example.
Click on the File menu Go to the Menu bar in the top left corner and click on the File menu.
Select Save input From the File menu list, select the Save input option.
Point toward the Save Design window The Save Design window will open.
Point toward the Osdag_Workspace folder I have already created a folder named Osdag_Workspace on my Desktop.
Only narration Users can create a folder with a suitable name according to their convenience.
Double click on the Osdag_workspace folder I will double click on the Osdag underscore workspace folder to open and select it.
Type Input-sample-design in the File name textbox Now, let us specify a file name in the File name textbox below.

I will edit the file name to Input hyphen sample hyphen design.

Point towards Input-sample-design.OSI Here we can see that the Input file has an OSI extension.
Only narration The acronym OSI stands for Osdag Input.
Click on the Save button Now, click on the Save button to save the OSI file and exit the Save Design window
Only narration We can use this saved OSI file to retrieve the inputs and perform the design.

It can also be shared amongst peers for checking the design.

Only narration Let us now try to load the same OSI file and perform a design check.
Click on the Reset button Reset all the inputs to default by clicking the Reset button below the Input Dock.
Point toward the Input Dock fields We see the inputs are now set to their default values.
Click on the File menu Go to the Menu bar and click on the File menu.
Select Load input From the File menu list, select the Load input option.
Point toward the Open Design window The Open Design window will open.
Point toward the Osdag_workspace folder I have saved the OSI file in the Osdag underscore workspace folder.
Double click on the Osdag_workspace folder and click on Input-sample-design.OSI file Open the Osdag underscore workspace folder and select Input hyphen sample hyphen design.OSI file.
Click on the Open button Now, click on the Open button below to load the OSI file.
Point toward the Input Dock fields We see that the inputs are loaded automatically to the Input Dock.
Cursor on all the input dock fields. Users do not have to define the inputs one by one.
Only narration We are now ready to run the design.
Click on the Design button Click on the Design button below the Input Dock.
Point toward the Log messages We see the log messages in the log message window.


The status of the design is Unsafe.

Only narration We will see how to rectify unsafe design in the next tutorial.
Only narration This brings us to the end of this tutorial.
Slide:

Summary

In this tutorial, we have
  • Saved input values
  • Imported OSI file and performed design


Slide:

Assignment

As an assignment, do the following
  • Open Welded to End Gusset module of the Tension Member module
  • Give your inputs
  • Save the OSI file


Slide:

Assignment

  • Check if the design is safe or unsafe


Slide:

About Spoken Tutorial Project

The video at the following link summarizes the Spoken Tutorial Project


Please download and watch it

Slide:

Spoken Tutorial Workshops

The Spoken Tutorial Project team conducts workshops and gives certificates


For more details, please write to us

Slide:

Answers for THIS Spoken Tutorial

Please post your timed queries in this forum
Slide:

FOSSEE Forum

For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
Slide:

Sample Design Examples


https://osdag.fossee.in/resources/sample-design

  • The Osdag team at FOSSEE creates sample design examples for self-learning
  • These examples can be practised using the Osdag software
  • For more details, please visit this link

https://osdag.fossee.in/resources/sample-design


Slide:

Acknowledgement

The Spoken Tutorial project is funded by the Ministry of Education, Government of India
Slide:

Thank you

This is Anandajith TS, FOSSEE IIT Bombay signing off


Thanks for joining.

Contributors and Content Editors

Anandajitht, Danish, Madhurig

Retrieved from "https://script.spoken-tutorial.org/index.php?title=Osdag/C3/Save-and-Import-input-values-in-Osdag/English&oldid=56283"