Difference between revisions of "Osdag/C2/Performing-a-design-check-in-Osdag/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
 
(3 intermediate revisions by 3 users not shown)
Line 5: Line 5:
 
'''Author''': Monika Soni (script), Anandajith TS (recording)
 
'''Author''': Monika Soni (script), Anandajith TS (recording)
  
'''Keywords:''' '''Video tutorial, Design check, Database, Design Process, GUI, Osdag'''
+
'''Keywords:''' osdag, optimum design, design check, member design, connection design, steel design optimisation, tension member, database, gui, video tutorial.
 
+
  
  
Line 13: Line 12:
 
{| border=1
 
{| border=1
 
|-  
 
|-  
|| Visual Cue
+
|| '''Visual Cue'''
|| Narration
+
|| '''Narration'''
 
|-  
 
|-  
|| '''Slide: '''Title Slide
+
|| '''Slide: '''
|| Welcome to the spoken tutorial on '''Performing a design check in Osdag.'''
+
 
 +
'''Title Slide'''
 +
|| Welcome to the spoken tutorial on '''Performing a design check in Osdag'''.
 
|-  
 
|-  
|| '''Slide: '''Learning Objectives
+
|| '''Slide: '''
 +
 
 +
'''Learning Objectives'''
 
|| In this tutorial, we will learn how to,
 
|| In this tutorial, we will learn how to,
 
* Perform a '''design check'''
 
* Perform a '''design check'''
 
* Interpret the '''log messages'''
 
* Interpret the '''log messages'''
 
* Rectify '''unsafe''' designs using '''log messages'''
 
* Rectify '''unsafe''' designs using '''log messages'''
* Arrive at a '''safe '''design using '''log messages'''
+
* Arrive at a '''safe '''design using '''log messages'''.
  
  
 
|-  
 
|-  
|| '''Slide: '''System Requirements
+
|| '''Slide: '''
 +
 
 +
 
 +
'''System Requirements'''
 
|| To record this tutorial, I am using:
 
|| To record this tutorial, I am using:
 
* '''Windows 11 Operating System''', and
 
* '''Windows 11 Operating System''', and
Line 35: Line 41:
  
 
|-  
 
|-  
|| '''Slide:''' Pre-requisites
+
|| '''Slide:'''
 
+
 
+
 
+
  
 +
'''Pre-requisites'''
  
  
 
[https://osdag.fossee.in/ https://spoken-tutorial.org]
 
[https://osdag.fossee.in/ https://spoken-tutorial.org]
 
|| To follow this tutorial you should have,
 
|| To follow this tutorial you should have,
 +
 
* '''Osdag''' installed on your system
 
* '''Osdag''' installed on your system
 
* Basic knowledge of '''structural steel design'''
 
* Basic knowledge of '''structural steel design'''
  
  
 
+
If not please access the prerequisite tutorials available on this website.
 
+
 
+
If not please access the prerequisite''' '''tutorials available on this website.
+
 
|-  
 
|-  
 
|| Only narration
 
|| Only narration
|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and '''Windows '''is the same.
+
|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and '''Windows ''' is the same.
 
+
  
  
Line 66: Line 67:
 
* Design a '''Tension Member''' with a '''bolted end connection'''
 
* Design a '''Tension Member''' with a '''bolted end connection'''
  
* The member carries a '''factored axial force '''of '''500 kN'''
+
* The member carries a '''factored axial force ''' of '''500 kN'''
  
* Let’s perform a '''design check''' by adopting the given '''design '''specifications:
+
* Let’s perform a '''design check''' by adopting the given '''design ''' specifications:
  
 
* '''Section:'''
 
* '''Section:'''
Line 83: Line 84:
 
*'''End Connection:'''
 
*'''End Connection:'''
 
** '''Connector: '''
 
** '''Connector: '''
**** '''Type: Bolted'''
+
*** '''Type: Bolted'''
**** '''Diameter: 16, 20'''
+
*** '''Diameter: 16, 20'''
**** '''Bolt Type: Bearing Bolt'''
+
*** '''Bolt Type: Bearing Bolt'''
**** '''Grade: 4.8, 5.8, 6.8'''
+
*** '''Grade: 4.8, 5.8, 6.8'''
 
+
 
** '''Gusset Plate: '''
 
** '''Gusset Plate: '''
**** '''Thickness: 16 mm'''
+
*** '''Thickness: 16 mm'''
  
  
Line 100: Line 100:
 
|-  
 
|-  
 
|| Click on the '''Section Profile drop-down menu'''
 
|| Click on the '''Section Profile drop-down menu'''
|| Click on the '''Section Profile''' '''drop-down''' '''menu'''.
+
|| Click on the '''Section Profile drop-down menu'''.
 
|-  
 
|-  
 
|| Select '''Back to Back Angles'''
 
|| Select '''Back to Back Angles'''
|| Let’s select '''Back to Back Angles '''from the list of profiles.
+
|| Let’s select '''Back to Back Angles ''' from the list of profiles.
 
|-  
 
|-  
 
|| Click on the '''Conn_Location drop-down menu'''
 
|| Click on the '''Conn_Location drop-down menu'''
|| Now, click the '''Conn_Location drop-down menu.'''
+
|| Now, click the '''Conn_Location drop-down menu'''.
 
|-  
 
|-  
 
|| Select '''Long Leg'''
 
|| Select '''Long Leg'''
Line 114: Line 114:
 
|| Now, let us define the '''custom section''' size.
 
|| Now, let us define the '''custom section''' size.
 
|-  
 
|-  
|| Only narration
+
|| Cursor near Section Size.
 
|| In this case we have to define a 120 x 120 x 12''' Angle section.'''
 
|| In this case we have to define a 120 x 120 x 12''' Angle section.'''
 
|-
 
|-
 
|| Click on the '''Section Size drop- down''' '''menu '''and select '''Customized.'''
 
|| Click on the '''Section Size drop- down''' '''menu '''and select '''Customized.'''
|| Click on the '''Section Size drop-down''' '''menu''', and
+
|| Click on the '''Section Size drop-down menu''', and
  
 
Select '''Customized'''.
 
Select '''Customized'''.
Line 126: Line 126:
 
|-
 
|-
 
|| Point toward the list of '''Selected sections '''in the '''Customized window'''.
 
|| Point toward the list of '''Selected sections '''in the '''Customized window'''.
|| Currently, all the '''sections '''are selected by default.
+
|| Currently, all the '''sections ''' are selected by default.
 
|-
 
|-
 
|| Point to the four types of buttons in the window.
 
|| Point to the four types of buttons in the window.
|| There are four types of '''buttons '''available for selection.
+
|| There are four types of '''buttons ''' available for selection.
 
|-
 
|-
 
|| Point toward the '''>> button'''  
 
|| Point toward the '''>> button'''  
|| The first '''button '''selects all the sections at once.
+
|| The first '''button ''' selects all the sections at once.
  
 
It sends all the sections to the '''Selected '''list.
 
It sends all the sections to the '''Selected '''list.
 
|-
 
|-
 
|| Point toward the '''> button'''  
 
|| Point toward the '''> button'''  
|| The second '''button '''selects a single section and sends it to the '''Selected '''list.
+
|| The second '''button ''' selects a single section and sends it to the '''Selected ''' list.
 
|-
 
|-
 
|| Point toward the '''< button'''  
 
|| Point toward the '''< button'''  
|| The third '''button '''deselects a single section from the '''Selected '''list.
+
|| The third '''button ''' deselects a single section from the '''Selected '''list.
  
It sends the section back to the '''Available '''list.
+
It sends the section back to the '''Available ''' list.
 
|-
 
|-
 
|| Point toward the '''<< button'''  
 
|| Point toward the '''<< button'''  
 
|| And, the fourth '''button '''deselects all the sections at once.
 
|| And, the fourth '''button '''deselects all the sections at once.
  
It sends all the sections back to the '''Available '''list.
+
It sends all the sections back to the '''Available ''' list.
 
|-
 
|-
 
|| Click on the '''<< button'''  
 
|| Click on the '''<< button'''  
|| Click on the fourth '''button''' to '''unselect '''all the '''sections '''at once.
+
|| Click on the fourth '''button''' to unselect all the '''sections ''' at once.
 
|-
 
|-
 
|| Point toward the list of '''Available sections '''in the '''Customized window'''.
 
|| Point toward the list of '''Available sections '''in the '''Customized window'''.
|| We can select the desired section from the list of '''Available sections. '''
+
|| We can select the desired section from the list of '''Available sections'''.
 
|-
 
|-
 
|| '''Scroll '''down multiple times in the list of '''Available sections '''in the '''Customized window'''.
 
|| '''Scroll '''down multiple times in the list of '''Available sections '''in the '''Customized window'''.
|| '''Scroll '''down the list of '''Available sections '''to locate '''120x120x12.'''
+
|| '''Scroll '''down the list of '''Available sections '''to locate '''120x120x12'''.
 
|-
 
|-
 
|| Point toward '''120x120x12'''
 
|| Point toward '''120x120x12'''
Line 164: Line 164:
 
|| There are two ways to select a '''section:'''
 
|| There are two ways to select a '''section:'''
  
We can either '''double-click''' on a particular '''section '''to select it right away.
+
We can either '''double-click''' on a particular '''section ''' to select it right away.
 
|-
 
|-
 
|| '''Click '''on '''120x120x12'''
 
|| '''Click '''on '''120x120x12'''
|| Another way is to '''click '''on the desired '''section '''to choose it.
+
|| Another way is to '''click '''on the desired '''section ''' to choose it.
 
|-
 
|-
 
|| Click on the '''> button'''  
 
|| Click on the '''> button'''  
Line 173: Line 173:
 
|-
 
|-
 
|| Point toward '''120x120x12 '''in the '''Selected sections '''list
 
|| Point toward '''120x120x12 '''in the '''Selected sections '''list
|| We can now see the '''section '''listed under the '''Selected sections '''on the right.
+
|| We can now see the '''section ''' listed under the '''Selected sections ''' on the right.
 
|-
 
|-
 
|| '''Click '''on the '''Submit button'''
 
|| '''Click '''on the '''Submit button'''
Line 179: Line 179:
 
|-
 
|-
 
|| Only narration
 
|| Only narration
|| Let us now specify the '''Material Grade.'''
+
|| Let us now specify the '''Material Grade'''.
 
|-
 
|-
 
|| Click on the '''Material drop-down menu '''and''' '''Select '''E 250 (Fe 410 W)A'''
 
|| Click on the '''Material drop-down menu '''and''' '''Select '''E 250 (Fe 410 W)A'''
Line 191: Line 191:
 
|-
 
|-
 
|| Type 500
 
|| Type 500
|| Enter the value of '''Axial load '''as 500 '''kN'''.
+
|| Enter the value of '''Axial load ''' as 500 '''kilo newton'''.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 201: Line 201:
 
|| '''Click '''on the '''Diameter drop-down menu''', and  
 
|| '''Click '''on the '''Diameter drop-down menu''', and  
  
Select '''Customized.'''
+
Select '''Customized'''.
 
|-
 
|-
 
|| Point to the '''Selected list.'''
 
|| Point to the '''Selected list.'''
Line 213: Line 213:
 
|| The standard '''Available '''bolt diameters are listed on the left.
 
|| The standard '''Available '''bolt diameters are listed on the left.
 
|-
 
|-
|| Only narration
+
||Point to the list
|| Next, we will select the desired diameters from this list.
+
|| Next, we will select the desired diameters from the list.
 
|-
 
|-
|| Press '''Ctrl '''and click on 16 and 20
+
|| Press '''Ctrl '''and click on 16 and 20.
 
|| Press the '''Ctrl key '''and click on 16 and 20 to select multiple diameters from the list.
 
|| Press the '''Ctrl key '''and click on 16 and 20 to select multiple diameters from the list.
 
|-
 
|-
 
|| Click on the '''> button'''  
 
|| Click on the '''> button'''  
|| Then '''click '''on the second '''button''' to add them to the list of '''Selected diameters'''.
+
|| Then '''click ''' on the second '''button''' to add them to the list of '''Selected diameters'''.
 
|-
 
|-
 
|| '''Click '''on the '''Submit button'''
 
|| '''Click '''on the '''Submit button'''
|| '''Click '''on the '''Submit button '''below to confirm and exit.
+
|| '''Click '''on the '''Submit button ''' below to confirm and exit.
 
|-  
 
|-  
|| Click on the''' Type drop-down menu '''and select '''Bearing Bolt '''
+
|| Click on the''' Type drop-down menu ''' >> select '''Bearing Bolt '''.
|| For the '''bolt Type, '''select''' Bearing Bolt.'''  
+
|| For the '''bolt Type, select '''Bearing Bolt'''.
 
+
 
+
  
 
|-  
 
|-  
 
|| Click on the '''Property Class drop-down menu'''
 
|| Click on the '''Property Class drop-down menu'''
 
|| '''Click '''on the '''Property Class drop-down menu''', and  
 
|| '''Click '''on the '''Property Class drop-down menu''', and  
 
  
 
Select '''Customized.'''
 
Select '''Customized.'''
Line 240: Line 237:
 
|| The standard available bolt '''grades '''are listed on the right.
 
|| The standard available bolt '''grades '''are listed on the right.
 
|-
 
|-
|| Only narration
+
||Cursor near '''Selected'''.
|| All the grades are selected by default in the '''Customized '''option.
+
|| All the grades are selected by default in the '''Customized ''' option.
  
 
Let us now deselect the unwanted '''grades '''from this list.
 
Let us now deselect the unwanted '''grades '''from this list.
 
|-
 
|-
|| Press '''Ctrl '''and click on 3.6, 4.6, 5.6, 8.8, 9.8, 10.9 and 12.9
+
|| Press '''Ctrl ''' and click on 3.6, 4.6, 5.6, 8.8, 9.8, 10.9 and 12.9
|| Press the '''Ctrl key '''and click on 3.6, 4.6, 5.6, 8.8, 9.8, 10.9 and 12.9.
+
|| Press the '''Ctrl key ''' and click on 3.6, 4.6, 5.6, 8.8, 9.8, 10.9 and 12.9.
 
|-
 
|-
 
|| Click on the '''< button'''  
 
|| Click on the '''< button'''  
Line 254: Line 251:
 
|| '''Click '''on the '''Submit button '''below to confirm and exit.
 
|| '''Click '''on the '''Submit button '''below to confirm and exit.
 
|-
 
|-
|| Only narration
+
|| Cursor near Thickness drop down menu.
 
|| Let us now define the plate thickness.
 
|| Let us now define the plate thickness.
 
|-  
 
|-  
 
|| Click on the '''Thickness drop-down menu'''
 
|| Click on the '''Thickness drop-down menu'''
 
|| '''Click '''on the '''Thickness drop-down menu''', and  
 
|| '''Click '''on the '''Thickness drop-down menu''', and  
 
  
 
Select '''Customized.'''
 
Select '''Customized.'''
 
|-
 
|-
|| Point toward the '''Selected '''list
+
|| Point towards the '''Selected '''list
 
|| The standard available plate '''thicknesses '''are listed on the right.
 
|| The standard available plate '''thicknesses '''are listed on the right.
 
|-
 
|-
|| Only narration
+
|| Point towards the '''Selected '''list
|| Let us now de-select the unwanted '''thicknesses '''from this list.
+
|| Let us now de-select the unwanted '''thicknesses ''' from this list.
 
|-
 
|-
 
|| Click on the '''<< button'''  
 
|| Click on the '''<< button'''  
Line 273: Line 269:
 
|-
 
|-
 
|| '''Double-click''' on 16
 
|| '''Double-click''' on 16
|| Now''', Double-click''' on 16 to select it.
+
|| Now, '''Double-click''' on 16 to select it.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
Line 291: Line 287:
 
|-  
 
|-  
 
|| Only narration
 
|| Only narration
|| In this case, '''Osdag '''will only perform '''design '''with the defined set of inputs.
+
|| In this case, '''Osdag ''' will only perform '''design ''' with the defined set of inputs.
 
|-  
 
|-  
 
|| Point toward the '''log messages'''
 
|| Point toward the '''log messages'''
Line 297: Line 293:
 
|-  
 
|-  
 
|| Point towards the '''Output Dock''' and the '''CAD window'''
 
|| Point towards the '''Output Dock''' and the '''CAD window'''
|| The '''Output Dock''' and '''CAD window''' are inactive as the '''design '''is not successful.
+
|| The '''Output Dock''' and '''CAD window''' are inactive as the '''design ''' is not successful.
 
|-
 
|-
 
|| Only narration
 
|| Only narration
|| Let us now rectify our '''design '''to arrive at a '''safe design'''.
+
|| Let us now rectify our '''design ''' to arrive at a '''safe design'''.
 
|-
 
|-
 
|| Point toward '''WARNING'''
 
|| Point toward '''WARNING'''
Line 306: Line 302:
 
|-
 
|-
 
|| Read the '''WARNING '''message
 
|| Read the '''WARNING '''message
|| The '''WARNING '''message is '''‘The tension force (500.0 kN) exceeds the tension capacity (436.36 kN) with respect to the maximum available plate thickness of 16.0 mm.’'''
+
|| The '''WARNING '''message is '''‘The tension force (500.0 kN) exceeds the tension capacity (436.36 kN) with respect to the maximum available plate thickness of 16.0 mm’'''.
 
|-
 
|-
 
|| Point to log messages
 
|| Point to log messages
|| In this case, the '''design '''has failed is failing due to the '''plate thickness'''.
+
|| In this case, the '''design ''' has failed due to the '''plate thickness'''.
  
 
So, let us increase the '''plate thickness''' and '''re-design'''.
 
So, let us increase the '''plate thickness''' and '''re-design'''.
Line 328: Line 324:
 
|-  
 
|-  
 
|| Click on the '''Design''' '''button'''
 
|| Click on the '''Design''' '''button'''
|| Click on the '''Design button '''at the bottom to restart the '''design check'''.
+
|| Click on the '''Design button ''' at the bottom to restart the '''design check'''.
 
|-  
 
|-  
 
|| Point toward the '''log messages'''
 
|| Point toward the '''log messages'''
|| The '''log message''' now indicates that the '''design '''is '''safe'''.
+
|| The '''log message''' now indicates that the '''design ''' is '''safe'''.
 
|-  
 
|-  
 
|| Point towards the '''Output Dock''' and the '''CAD window'''
 
|| Point towards the '''Output Dock''' and the '''CAD window'''
|| The '''Output Dock''' and '''CAD window''' become active as the '''design '''is now successful.
+
|| The '''Output Dock''' and '''CAD window''' become active as the '''design ''' is now successful.
 
|-  
 
|-  
 
|| Only narration
 
|| Only narration
Line 341: Line 337:
 
Let us summarize.
 
Let us summarize.
 
|-  
 
|-  
|| '''Slide: '''Summary
+
|| '''Slide: '''
|| In this tutorial, we have* Learnt to perform a''' design check '''
+
 
 +
'''Summary'''
 +
|| In this tutorial, we have
 +
* Learnt to perform a ''' design check '''
 
* Interpreted the '''log messages'''  
 
* Interpreted the '''log messages'''  
 
* Rectified '''unsafe design''' using '''log messages'''
 
* Rectified '''unsafe design''' using '''log messages'''
 
 
* Arrived at a safe design using '''log messages'''
 
* Arrived at a safe design using '''log messages'''
  
  
 
|-  
 
|-  
|| '''Slide: '''Assignment
+
|| '''Slide: '''
|| As an assignment, please do the following* Design a '''Tension Member''' with a '''welded '''end connection.  
+
 
 +
'''Assignment'''
 +
|| As an assignment, please do the following
 +
* Design a '''Tension Member''' with a '''welded '''end connection.  
 
* The member carries a '''factored axial force '''of 500 '''kN.'''  
 
* The member carries a '''factored axial force '''of 500 '''kN.'''  
  
  
 
|-  
 
|-  
|| '''Slide: '''Assignment
+
|| '''Slide: '''
||
+
  
Perform a '''design check''' by adopting the given design specifications:* '''Section:'''
+
'''Assignment'''
 +
|| Perform a '''design check''' by adopting the given design specifications:
 +
* '''Section:'''
 
** '''Profile: Angles'''
 
** '''Profile: Angles'''
 
** '''Connection Location: Short Leg'''
 
** '''Connection Location: Short Leg'''
Line 368: Line 370:
  
 
|-  
 
|-  
|| '''Slide: '''Assignment
+
|| '''Slide: '''
|| * '''Gusset Plate: '''
+
 
 +
 
 +
'''Assignment'''
 +
||  
 +
* '''Gusset Plate: '''
 
** '''Thickness: 16 mm'''
 
** '''Thickness: 16 mm'''
  
  
 
|-
 
|-
|| '''Slide: '''About Spoken Tutorial Project
+
|| '''Slide: '''
 +
 
 +
'''About Spoken Tutorial Project'''
 
|| The video at the following link summarizes the Spoken Tutorial Project.
 
|| The video at the following link summarizes the Spoken Tutorial Project.
  
Line 380: Line 388:
 
Please download and watch it.
 
Please download and watch it.
 
|-
 
|-
|| '''Slide:'''Spoken Tutorial Workshops
+
|| '''Slide:'''
 +
'''
 +
Spoken Tutorial Workshops'''
 
|| The Spoken Tutorial Project team conducts workshops and gives certificates.
 
|| The Spoken Tutorial Project team conducts workshops and gives certificates.
  
Line 386: Line 396:
 
For more details, please write to us.
 
For more details, please write to us.
 
|-
 
|-
|| '''Slide:'''Answers for THIS Spoken Tutorial
+
|| '''Slide:'''
 +
 
 +
 
 +
'''Answers for THIS Spoken Tutorial'''
 
|| Please post your timed queries in this forum.
 
|| Please post your timed queries in this forum.
 
|-
 
|-
|| '''Slide: '''FOSSEE Forum
+
|| '''Slide: '''
 +
 
 +
'''FOSSEE Forum'''
 
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
 
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
 
|-
 
|-
|| '''Slide: '''Sample Design Examples
+
|| '''Slide: '''
 
+
  
 +
'''Sample Design Examples'''
  
  
 
[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
 
[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
|| * The '''Osdag '''team at FOSSEE creates '''sample design examples''' for self-learning
+
||  
 +
* The '''Osdag '''team at FOSSEE creates '''sample design examples''' for self-learning
 
* These examples can be practiced using the '''Osdag''' '''software'''
 
* These examples can be practiced using the '''Osdag''' '''software'''
* For more details, please visit this link [https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
+
* For more details, please visit this link  
 +
 
 +
[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
  
  
 
|-
 
|-
|| '''Slide: '''Acknowledgement
+
|| '''Slide: '''
 +
 
 +
'''Acknowledgement'''
 
|| The '''Spoken''' '''Tutorial''' project is funded by the '''Ministry of Education''', Government of India.
 
|| The '''Spoken''' '''Tutorial''' project is funded by the '''Ministry of Education''', Government of India.
 
|-
 
|-
|| '''Slide: '''Thank you
+
|| '''Slide: '''
 +
 
 +
 
 +
'''Thank you'''
 
|| This is '''Anandajith TS''', FOSSEE IIT Bombay signing off.
 
|| This is '''Anandajith TS''', FOSSEE IIT Bombay signing off.
  

Latest revision as of 15:16, 13 July 2023


Title of the script: Performing a design check in Osdag

Author: Monika Soni (script), Anandajith TS (recording)

Keywords: osdag, optimum design, design check, member design, connection design, steel design optimisation, tension member, database, gui, video tutorial.



Visual Cue Narration
Slide:

Title Slide

Welcome to the spoken tutorial on Performing a design check in Osdag.
Slide:

Learning Objectives

In this tutorial, we will learn how to,
  • Perform a design check
  • Interpret the log messages
  • Rectify unsafe designs using log messages
  • Arrive at a safe design using log messages.


Slide:


System Requirements

To record this tutorial, I am using:
  • Windows 11 Operating System, and
  • Osdag v2021.02.a.a12f


Slide:

Pre-requisites


https://spoken-tutorial.org

To follow this tutorial you should have,
  • Osdag installed on your system
  • Basic knowledge of structural steel design


If not please access the prerequisite tutorials available on this website.

Only narration The user interface of Osdag for Ubuntu Linux, and Windows is the same.


Only narration In this tutorial, We will solve a sample design example to demonstrate Scenario 2.
Slide: Sample Design Example
  • Design a Tension Member with a bolted end connection
  • The member carries a factored axial force of 500 kN
  • Let’s perform a design check by adopting the given design specifications:
  • Section:
    • Profile: Back to Back Angles
    • Connection Location: Long Leg
    • Section Size: 120x120x12
    • Material Grade: E 250 (Fe 410 W)A
    • Length: 3200 mm


Slide: Sample Design Example
  • End Connection:
    • Connector:
      • Type: Bolted
      • Diameter: 16, 20
      • Bolt Type: Bearing Bolt
      • Grade: 4.8, 5.8, 6.8
    • Gusset Plate:
      • Thickness: 16 mm


Only narration Let us switch to Osdag.
Point to Input Dock Now let’s start filling the Input Dock for our sample design.
Click on the Section Profile drop-down menu Click on the Section Profile drop-down menu.
Select Back to Back Angles Let’s select Back to Back Angles from the list of profiles.
Click on the Conn_Location drop-down menu Now, click the Conn_Location drop-down menu.
Select Long Leg Select Long Leg from the list.
Cursor near Section Size. Now, let us define the custom section size.
Cursor near Section Size. In this case we have to define a 120 x 120 x 12 Angle section.
Click on the Section Size drop- down menu and select Customized. Click on the Section Size drop-down menu, and

Select Customized.

Point toward the Customized window. The Customized window opens.
Point toward the list of Selected sections in the Customized window. Currently, all the sections are selected by default.
Point to the four types of buttons in the window. There are four types of buttons available for selection.
Point toward the >> button The first button selects all the sections at once.

It sends all the sections to the Selected list.

Point toward the > button The second button selects a single section and sends it to the Selected list.
Point toward the < button The third button deselects a single section from the Selected list.

It sends the section back to the Available list.

Point toward the << button And, the fourth button deselects all the sections at once.

It sends all the sections back to the Available list.

Click on the << button Click on the fourth button to unselect all the sections at once.
Point toward the list of Available sections in the Customized window. We can select the desired section from the list of Available sections.
Scroll down multiple times in the list of Available sections in the Customized window. Scroll down the list of Available sections to locate 120x120x12.
Point toward 120x120x12 We have located the desired section.
Point to the section. There are two ways to select a section:

We can either double-click on a particular section to select it right away.

Click on 120x120x12 Another way is to click on the desired section to choose it.
Click on the > button Then click the second button to add it to the list of Selected sections.
Point toward 120x120x12 in the Selected sections list We can now see the section listed under the Selected sections on the right.
Click on the Submit button Click on the Submit button below to confirm and exit.
Only narration Let us now specify the Material Grade.
Click on the Material drop-down menu and Select E 250 (Fe 410 W)A Click on the Material drop-down menu and select E 250 (Fe 410 W)A.
Type 3200 Enter the Length of the member as 3200 mm.
Factored Loads. Let us now define the Factored Loads.
Type 500 Enter the value of Axial load as 500 kilo newton.
Only narration Let us now give input for the connector.
Click on the Diameter drop-down menu and

Select Customized.

Click on the Diameter drop-down menu, and

Select Customized.

Point to the Selected list.

Move using the << double arrow button.

Here we see all the diameters in the Selected list.

Users can move the list to the Available section.

Point toward the Available list The standard Available bolt diameters are listed on the left.
Point to the list Next, we will select the desired diameters from the list.
Press Ctrl and click on 16 and 20. Press the Ctrl key and click on 16 and 20 to select multiple diameters from the list.
Click on the > button Then click on the second button to add them to the list of Selected diameters.
Click on the Submit button Click on the Submit button below to confirm and exit.
Click on the Type drop-down menu >> select Bearing Bolt . For the bolt Type, select Bearing Bolt.
Click on the Property Class drop-down menu Click on the Property Class drop-down menu, and

Select Customized.

Point toward the Selected list The standard available bolt grades are listed on the right.
Cursor near Selected. All the grades are selected by default in the Customized option.

Let us now deselect the unwanted grades from this list.

Press Ctrl and click on 3.6, 4.6, 5.6, 8.8, 9.8, 10.9 and 12.9 Press the Ctrl key and click on 3.6, 4.6, 5.6, 8.8, 9.8, 10.9 and 12.9.
Click on the < button Now, click on the third button to send them back to the Available list.
Click on the Submit button Click on the Submit button below to confirm and exit.
Cursor near Thickness drop down menu. Let us now define the plate thickness.
Click on the Thickness drop-down menu Click on the Thickness drop-down menu, and

Select Customized.

Point towards the Selected list The standard available plate thicknesses are listed on the right.
Point towards the Selected list Let us now de-select the unwanted thicknesses from this list.
Click on the << button Click on the fourth button to de-select all the sections at once.
Double-click on 16 Now, Double-click on 16 to select it.
Only narration Double-clicking on a value from a list is a quick way to select or unselect it.
Click on the Submit button Click on the Submit button below to confirm and exit.
Move the cursor on all the input fields from top to bottom We have entered all the inputs in the Input Dock.


We are now ready to perform the design check.

Click on the Design button Click on the Design button at the bottom to start the design check.
Only narration In this case, Osdag will only perform design with the defined set of inputs.
Point toward the log messages The log message indicates that the design is unsafe.
Point towards the Output Dock and the CAD window The Output Dock and CAD window are inactive as the design is not successful.
Only narration Let us now rectify our design to arrive at a safe design.
Point toward WARNING Let us read the WARNING.
Read the WARNING message The WARNING message is ‘The tension force (500.0 kN) exceeds the tension capacity (436.36 kN) with respect to the maximum available plate thickness of 16.0 mm’.
Point to log messages In this case, the design has failed due to the plate thickness.

So, let us increase the plate thickness and re-design.

Click on the Thickness drop-down menu Again, click on the Thickness drop-down menu, and

Select Customized.

Only narration Let us select a thicker plate this time, say 20 mm.
Double-click on 20 Double-click on 20, and
Click on the Submit button Click on the Submit button below.
Click on the Design button Click on the Design button at the bottom to restart the design check.
Point toward the log messages The log message now indicates that the design is safe.
Point towards the Output Dock and the CAD window The Output Dock and CAD window become active as the design is now successful.
Only narration This brings us to the end of the tutorial.

Let us summarize.

Slide:

Summary

In this tutorial, we have
  • Learnt to perform a design check
  • Interpreted the log messages
  • Rectified unsafe design using log messages
  • Arrived at a safe design using log messages


Slide:

Assignment

As an assignment, please do the following
  • Design a Tension Member with a welded end connection.
  • The member carries a factored axial force of 500 kN.


Slide:

Assignment

Perform a design check by adopting the given design specifications:
  • Section:
    • Profile: Angles
    • Connection Location: Short Leg
    • Section Size: 150x150x10
    • Material Grade: E 300 (Fe 440)
    • Length: 2560 mm


Slide:


Assignment

  • Gusset Plate:
    • Thickness: 16 mm


Slide:

About Spoken Tutorial Project

The video at the following link summarizes the Spoken Tutorial Project.


Please download and watch it.

Slide:

Spoken Tutorial Workshops

The Spoken Tutorial Project team conducts workshops and gives certificates.


For more details, please write to us.

Slide:


Answers for THIS Spoken Tutorial

Please post your timed queries in this forum.
Slide:

FOSSEE Forum

For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
Slide:

Sample Design Examples


https://osdag.fossee.in/resources/sample-design

  • The Osdag team at FOSSEE creates sample design examples for self-learning
  • These examples can be practiced using the Osdag software
  • For more details, please visit this link

https://osdag.fossee.in/resources/sample-design


Slide:

Acknowledgement

The Spoken Tutorial project is funded by the Ministry of Education, Government of India.
Slide:


Thank you

This is Anandajith TS, FOSSEE IIT Bombay signing off.

Thanks for joining.

Contributors and Content Editors

Anandajitht, Danish, Madhurig