Difference between revisions of "OpenFOAM/C2/Creating-curved-geometry-in-OpenFOAM/English-timed"

From Script | Spoken-Tutorial
Jump to: navigation, search
 
(7 intermediate revisions by 4 users not shown)
Line 1: Line 1:
−
 
 
{| border=1
 
{| border=1
−
|| ''Time'''
+
|| '''Time'''
 
|| '''Narration'''
 
|| '''Narration'''
  
 
|-
 
|-
 
| 00:01
 
| 00:01
−
| Hello and welcome to the spoken tutorial on '''creating Curved geometry in OpenFOAM'''
+
| Hello and welcome to the '''spoken tutorial''' on '''Creating Curved geometry in OpenFOAM'''.
  
 
|-
 
|-
−
| 00:07
+
| 00:06
−
| In this tutorial I will show you  
+
| In this tutorial, I will show you:
−
 
+
  
 
|-
 
|-
 
| 00:09
 
| 00:09
−
|'''Steps''' for creating  a '''curved geometry in openfoam'''
+
| Steps for creating  a curved geometry in openfoam.
−
 
+
  
 
|-
 
|-
 
| 00:14
 
| 00:14
−
|Viewing the '''results in paraview'''
+
| Viewing the results in '''paraview'''
  
 
|-
 
|-
−
| 00:18
+
| 00:17
−
|To record this tutorial  
+
|To record this tutorial,
−
 
+
  
 
|-
 
|-
 
| 00:19
 
| 00:19
−
|I am using '''Linux Operating system Ubuntu version 10.04'''.  '''OpenFOAM version 2.1.0 '''
+
|I am using: '''Linux Operating system Ubuntu''' version 10.04, '''OpenFOAM''' version 2.1.0  
−
 
+
  
 
|-
 
|-
 
| 00:28
 
| 00:28
−
|'''ParaView version 3.12.0 '''
+
|'''ParaView''' version 3.12.0.
  
 
|-
 
|-
−
| 00:33
+
| 00:32
−
|We will create a '''geometry''' for '''flow over cylinder'''.
+
|The tutorials were recorded using the versions specified in previous slide. Subsequently the tutorials were edited to latest versions. To install latest system requirements go to Installation Sheet
−
 
+
  
 
|-
 
|-
 
| 00:37
 
| 00:37
−
|Note that I am using this case just for '''explanation'''.
+
|We will create a geometry for flow over a cylinder.
−
 
+
  
 
|-
 
|-
−
| 00:42
+
| 00:41
−
|The '''cylinder '''is in a form of a '''semi circle.'''
+
|Note that I am using this case just for explanation.
−
 
+
  
 
|-
 
|-
−
| 00:45
+
| 00:46
−
|'''Meshing is a body fitted grid'''.
+
|The cylinder is in the form of a semi circle.
−
 
+
  
 
|-
 
|-
−
| 00:49
+
| 00:50
−
|The entire '''geometry''' is divided into blocks.
+
|'''Meshing''' is a body fitted grid.
−
 
+
  
 
|-
 
|-
−
| 00:54
+
|00:54  
−
|We break the '''semi circle''' into equal number of '''parts'''.
+
|The entire geometry is divided into '''block'''s.
−
 
+
  
 
|-
 
|-
 
| 00:59
 
| 00:59
−
|Now minimise this
+
|We break the semi circle into equal number of parts.
  
 
|-
 
|-
−
| 01:04
+
|01:03
−
| Open a '''blockMeshDict '''file of the previous tutorial
+
|Now minimize this.
−
 
+
  
 
|-
 
|-
 
| 01:08
 
| 01:08
−
|I have already opened it
+
| Open a 'blockMeshDict' file of the previous tutorial.
−
 
+
  
 
|-
 
|-
−
| 01:12
+
| 01:13
−
|Scroll down, for '''simple geometries''' you can see that  '''edges '''is kept empty
+
|I have already opened it.
  
 
|-
 
|-
−
| 01:21
+
| 01:17
−
|   Now Create a new '''blockMeshDict''' file
+
|Scroll down. For simple geometries, you can see that  '''edges '''is kept empty.
−
 
+
  
 
|-
 
|-
−
| 01:23
+
| 01:25
−
|To do this let us '''minimise''' this first
+
| Now Create a new 'blockMeshDict' file.
  
 
|-
 
|-
−
| 01:27
+
| 01:28
−
| Now '''Right click > create document > empty file'''
+
|To do this, let us minimize this first.
  
 
|-
 
|-
−
| 01:34
+
| 01:32
−
| name this as '''blockMeshDict'''.
+
| Now, right-click > '''create document > empty file'''.
−
 
+
  
 
|-
 
|-
−
| 01:41
+
| 01:39
−
|Note that '''M and D here are capital'''
+
| Name this as 'blockMeshDict'.
−
 
+
  
 
|-
 
|-
−
| 01:46
+
| 01:45
−
|'''Open this'''
+
|Note that M and D here are capital.
  
 
|-
 
|-
−
| 01:51
+
| 01:51
−
| Now you can copy the initial few lines from the '''lid driven cavity upto convertTometers'''
+
|Open this.
  
 
|-
 
|-
−
| 01:58
+
| 01:56
−
|Go up '''copy''' this upto '''convertToMeters'''
+
| Now you can copy the initial few lines from the 'lid driven cavity' up to 'convertTometers'.
  
 
|-
 
|-
−
| 02:04
+
| 02:03
−
| '''Copy this''' and '''paste it''' in the new '''blockMeshDict file'''
+
|Go up, copy this up to 'convertToMeters'.
  
 
|-
 
|-
−
| 02:12
+
| 02:09
−
|Now  Change the '''convert to meters''' from '''point one to one'''
+
| Copy this and paste it in the new 'blockMeshDict' file.
  
 
|-
 
|-
−
| 02:18
+
| 02:17
−
| As our '''geometry''' is in '''meters''' we will keep this as one
+
|Now,  change the 'convert to meters' from point one to one.
  
 
|-
 
|-
−
| 02:24
+
| 02:23
−
| Now press enter , press enter again
+
| As our geometry is in meters, we will keep this as one.
  
 
|-
 
|-
−
|02:28
+
| 02:29
−
| After this you need to enter the '''co-ordinates''' of the''' geometry''' in '''vertices'''
+
| Now press '''Enter''' ,  press '''Enter''' again.
−
 
+
  
 
|-
 
|-
−
| 02:35
+
|02:33
−
|Let me switch back to the slide.Note that the points should be  ordered in such a way starting from '''0,1,2,3''' and so on. as shown in the figure
+
| After this, you need to enter the co-ordinates of the  geometry in vertices.
  
 
|-
 
|-
−
| 02:47
+
| 02:40
−
| Minimise the slide. Now type '''vertices''' in the '''blockMeshDict''' file and press enter
+
|Let me switch back to the '''slide'''. Note that the points should be ordered  in such a way starting from 0, 1, 2, 3, 4 and so on, as shown in the figure.
  
 
|-
 
|-
−
|  02:57
+
|  02:52
−
| Insert the '''open bracket ''' and Press enter
+
| Minimize the slide. Now, type "vertices" in the 'blockMeshDict' file and press '''Enter'''.
  
 
|-
 
|-
−
|  03:00
+
|  03:01
−
|   Now enter the '''co-ordinates''' of  a geometry as shown in the '''diagram'''.
+
| Insert the open bracket and press '''Enter'''.
  
 
|-
 
|-
−
|  03: 05
+
|  03:05
−
| Let me switch back to the slides
+
|   Now enter the co-ordinates of the geometry as shown in the diagram.
  
 
|-
 
|-
−
| 03:08
+
| 03:10
−
| For '''explanation''' I will use  '''right half of the semi-circle'''
+
| Let me switch back to the slides.
  
 
|-
 
|-
−
| 03:12
+
| 03:13
−
| Enter the values for the points in the figure starting '''from 0'''
+
| For explanation, I will use right half of the semi-circle.
−
 
+
  
 
|-
 
|-
−
| 03:16
+
| 03:17
−
|Let me switch back to the '''blockMeshDict''' file
+
| Enter the values for the points in the figure starting from 0.
  
 
|-
 
|-
−
|03:20
+
| 03:21
−
| leave some space and enter '''co-ordinates''' of '''point 0'''
+
|Let me switch back to the 'blockMeshDict' file.
  
 
|-
 
|-
−
| 03:27
+
|03:25
−
| Open close bracket  enter '''(0.5 (space) 0 (space) 0)'''. Press Enter
+
| Leave some space and enter the co-ordinates of point 0.
  
 
|-
 
|-
−
|  03:36
+
|  03:32
−
| Again leave some space , '''open close bracket '''
+
| Open close bracket  enter '''0.5 (space) 0 (space) 0'''. Press '''Enter'''.
  
 
|-
 
|-
−
| 03:39
+
| 03:41
−
|Enter co-ordinates for point  (1 (space) 0 (space) 0) Press enter
+
| Again leave some space , open close bracket.
  
 
|-
 
|-
−
| 03:45
+
| 03:44
−
|Now leave two '''vertical spaces''' , again  press enter
+
|Enter the co-ordinates for point  '''1 (space) 0 (space) 0'''. Press '''Enter'''.
  
 
|-
 
|-
−
| 03:49
+
| 03:50
−
|   again  press enter
+
|Now leave two vertical spaces, again  press '''Enter''', again  press '''Enter'''.
−
 
+
 
 
|-
 
|-
−
| 03:51
+
| 03:56
−
| leave some space and enter the '''co-ordinate '''for   point number 4
+
| Leave some space and enter the co-ordinates for point number 4.
  
 
|-
 
|-
−
| 03:57
+
| 04:02
−
| '''Open close bracket''',''' enter (0.707 (space) 0.707 (space) 0)'''
+
| Open close bracket, enter '''0.707 (space) 0.707 (space) 0'''
  
 
|-
 
|-
−
|  04:05
+
|  04:10
−
|  Press enter. Leave some space
+
|  Press '''Enter'''. Leave some space.
−
 
+
  
 
|-
 
|-
−
| 04:09
+
| 04:14
−
|'''Open close bracket'''
+
|Open close bracket.Enter the co-ordinates for the  point 5.
−
 
+
−
 
+
−
 
+
  
 
|-
 
|-
−
| 04:11
+
| 04:18
−
| '''Enter the co-ordinates for the  point 5'''  
+
|Enter '''0.353 (space) 0.353 (space) 0''', press '''Enter'''.
−
 
+
  
 
|-
 
|-
−
| 04:13
+
|04:27
−
|'''Enter (0.353 (space) 0.353 (space) 0)''', press enter
+
| Now, leave 4 vertical spaces and enter co-ordinates for point number 9.
  
 
|-
 
|-
−
|04:22
+
| 04:32
−
| '''I leave 4 vertical spaces''' and
+
| 1 2 3 4 , again press '''Enter''', leave some space.
  
 
|-
 
|-
−
| 04:24
+
| 04:37
−
| '''Enter co-ordinates for point number 9'''
+
|Open, close bracket.
  
 
|-
 
|-
−
| 04:27
+
| 04:41
−
| '''1 2 3 4 ,''' again press enter, leave some space
+
| Enter '''0 (space) 1 (space) 0''', press '''Enter'''.
−
 
+
  
 
|-
 
|-
−
| 04:34
+
| 04:47
−
|'''Open close bracket '''
+
|   Leave some space.
  
 
|-
 
|-
−
| 04:36
+
| 04:48
−
| Enter '''(0 (space) 1 (space) 0)''', press enter
+
|Enter the co-ordinates for point number 10.
  
 
|-
 
|-
−
| 04:42
+
| 04:49
−
|   Leave some space
+
| Open close bracket ''' 0 (space) 0.5 (space) 0''' press '''Enter'''.
−
 
+
  
 
|-
 
|-
−
| 04:44
+
| 04:57
−
|Enter '''co-ordinates''' for '''point number 10'''
+
| Similarly enter the co-ordinates for the remaining points in the geometry.
  
 
|-
 
|-
−
| 04:47
+
| 05:03
−
| Open close bracket''' (0 (space) 0.5 (space) 0)''' and press enter
+
|Insert a close bracket   put a semi-colon and press '''Enter'''.
  
 
|-
 
|-
−
| 04:55
+
| 05:08
−
| Similarly '''enter the co-ordinates for the remaining points''' in the geometry.
+
|Again press '''Enter'''.Now, type "blocks", press '''Enter'''.
−
 
+
  
 
|-
 
|-
−
| 05:00
+
| 05:16
−
|Insert a close bracket   put a''' semi-colon '''Press enter
+
|Insert an open bracket,  press '''Enter'''.
−
 
+
  
 
|-
 
|-
−
| 05:05
+
| 05:19
−
|Again press enter
+
−
 
+
−
|-
+
−
| 05:07
+
−
| Now '''Type blocks''' press enter
+
−
 
+
−
 
+
−
|-
+
−
| 05:13
+
−
|Insert a '''open bracket''' press enter
+
−
 
+
−
|-
+
−
| 05:17
+
 
| Let me switch back to the slides
 
| Let me switch back to the slides
  
 
|-
 
|-
−
| 05:20
+
| 05:23
−
| The'''Block numbers''' are circled as shown in the figure
+
| The '''block numbers''' are circled as shown in the figure.
  
 
|-
 
|-
−
|05:25
+
|05:27
−
|Now let me switch back to the '''blockMeshDict file'''
+
|Now let me switch back to the 'blockMeshDict file'.
−
 
+
−
|-
+
−
| 05:28
+
−
| Leave some space
+
−
 
+
  
 
|-
 
|-
 
| 05:31
 
| 05:31
−
|Now Enter the type of '''block i.e. Hex'''
+
| Leave some space.
−
 
+
  
 
|-
 
|-
−
| 05:35
+
| 05:33
−
|leave some space
+
|Now enter the type of  the '''block''' i.e. '''Hex''', leave some space.
  
 
|-
 
|-
−
|  05:37
+
|  05:41
−
|  Now enter the''' points''' for the '''blocks'''
+
|  Now enter the points for the blocks.
−
 
+
  
 
|-
 
|-
−
| 05:41
+
| 05:46
−
|'''Open close brackets'''
+
| Open, close brackets.
−
 
+
  
 
|-
 
|-
−
| 05:44
+
| 05:48
−
|Leave some space
+
|Leave some space, open close brackets, leave some space the '''simple Grading''' can be kept as '''(1 1 1) ''' and press '''Enter'''.
  
 
|-
 
|-
−
| 05:46
+
| 06:04
−
|   the '''simple grading''' can be kept as '''(1 1 1) ''' press enter
+
| For creating the '''blocks''', please refer to the tutorial on '''creating simple geometry in OpenFOAM'''.
  
 
|-
 
|-
−
|  05:55
+
| 06:11
−
| For creating the '''blocks''' please refer to the '''tutorial'''
+
|Note that there will be more number of '''blocks''' in this example.  
−
 
+
−
 
+
−
|-
+
−
| 05:58
+
−
|on '''creating simple geometry in OpenFOAM'''
+
−
 
+
−
 
+
−
|-
+
−
| 06:03
+
−
|'''Note that''' there will be more number of '''blocks''' in this example  
+
−
 
+
−
|-
+
−
| 06:08
+
−
|Now '''Insert a close bracket'''
+
−
 
+
−
 
+
−
|-
+
−
| 06:10
+
−
|'''Insert a semi-colon'''  press enter. Again press enter
+
  
 
|-
 
|-
 
| 06:16
 
| 06:16
−
| in the next line type '''edges''' and press enter
+
|Now, insert a close bracket.
−
 
+
  
 
|-
 
|-
−
| 06:22
+
| 06:19
−
|insert a '''open bracket''' and press enter
+
|Insert a semi-colon, and  press '''Enter'''. Again press '''Enter'''.
  
 
|-
 
|-
−
| 06:26
+
| 06:25
−
| Here you need to enter the '''points''' which are the '''end points of the arcs'''
+
| In the next line, type "edges" and press '''Enter'''.
  
 
|-
 
|-
 
| 06:31
 
| 06:31
−
|Leave some space and '''type arc''' leave some space
+
|Insert a open bracket and press '''Enter'''.
−
 
+
  
 
|-
 
|-
−
| 06:37
+
| 06:35
−
|Type the points which are the '''end points of the arc'''
+
| Here you need to enter the points which are the end points of the arcs.
  
 
|-
 
|-
−
| 06:41
+
| 06:40
−
|Let me switch back to the slide.Now  insert the '''end points of the arc'''
+
|Leave some space and type "arc". Leave some space, type the points which are the end points of the arc.
−
 
+
  
 
|-
 
|-
−
| 06:47
+
| 06:49
−
|In this we get,We '''start''' with arc '''0 5'''
+
|Let me switch back to the slide. Now, insert the  end points of the arc
−
 
+
  
 
|-
 
|-
−
| 06:53
+
| 06:55
−
|Let me switch back to the '''blockMeshDict file'''
+
|In this figure, we start with arc '''0 5'''.
−
 
+
−
 
+
−
|-
+
−
| 06:56
+
−
|Enter''' 0 space 5'''
+
−
 
+
−
|-
+
−
| 07:00
+
−
| Leave some space
+
−
 
+
  
 
|-
 
|-
 
| 07:02
 
| 07:02
−
|Insert '''open close bracket'''  
+
|Let me switch back to the 'blockMeshDict file'.
  
 
|-
 
|-
−
|07:04
+
| 07:06
−
| In  the bracket  enter the co-ordinate of any '''intermediate''' point in between the two '''arc points'''.
+
|Enter ''' 0 space 5'''.
−
 
+
  
 
|-
 
|-
−
| 07:12
+
| 07:09
−
|Now Let me switch back again to slides
+
| Leave some space. Insert open, close bracket.
  
 
|-
 
|-
−
| 07:15
+
|07:12
−
| In the figure you can see that you have to pick up a point in between the two end  points of the arc.
+
| In the bracket, enter the co-ordinates of any intermediate point in between the two arc points.
  
 
|-
 
|-
−
| 07:24
+
| 07:20
−
|In this geometry I have picked up '''right half''' of the circle
+
|Now, let me switch back again to slides.
  
 
|-
 
|-
−
| 07:28
+
| 07:23
−
| Using '''simple geometric relations'''
+
| In the figure, you can see that you have to pick up a point  in between the two end  points of the arc.
−
 
+
  
 
|-
 
|-
−
| 07:31
+
| 07:32
−
|you can find the co-ordinates of the intermediate point as shown in the semi-circle
+
|In this geometry, I have picked up right half of the circle.
  
 
|-
 
|-
−
| 07:39
+
| 07:37
−
| Similarly you can '''repeat''' the procedure for rest of the '''semi-circle geometry'''
+
| Using simple geometric relations, you can find the co-ordinates of the intermediate points as shown in the semi-circle.
  
 
|-
 
|-
−
| 07:45
+
| 07:47
−
|Now  let me switch back to the '''blockMeshDict file'''
+
| Similarly you can repeat the procedure for rest of the semi-circle geometry.
−
 
+
  
 
|-
 
|-
−
| 07:49
+
| 07:54
−
| press enter
+
|Now, let me switch back to the 'blockMeshDict file'.
  
 
|-
 
|-
−
| 07:51
+
| 07:57
−
| '''Note that there are more number of arcs in this example'''
+
| Press '''Enter'''.
  
 
|-
 
|-
−
| 08:00
+
| 07:59
−
|''' Insert a close bracket'''
+
| Note that there are more number of arcs in this example.
−
 
+
  
 
|-
 
|-
−
| 08:03
+
| 08:04
−
|'''Insert a semi -colon  press enter''' again press enter
+
| Insert a close bracket.
  
 
|-
 
|-
−
| 08:08
+
| 08:07
−
| |Now '''Enter the boundary patches after arcs'''
+
|Insert a semi -colon,  press '''Enter''', again press '''Enter'''.
−
 
+
  
 
|-
 
|-
 
| 08:11
 
| 08:11
−
|'''Refer to the tutorial on Simple geometry in OpenFOAM '''
+
| Now enter the '''boundary patche'''s after arcs.
−
 
+
  
 
|-
 
|-
 
| 08:15
 
| 08:15
−
|For entering the '''boundary patches'''
+
|Refer to the tutorial on '''Simple geometry in OpenFOAM''', for entering the '''boundary patches'''.
  
 
|-
 
|-
−
| 08:18
+
| 08:21
−
| Enter '''boundary''',press enter
+
| Enter "boundary", press '''Enter'''.
−
 
+
  
 
|-
 
|-
−
| 08:20
+
| 08:24
−
|'''Insert open bracket  press enter'''.''' Insert close bracket  semi-colon press enter'''
+
|Insert open bracket  press '''Enter'''. Insert close bracket  semi-colon, press '''Enter'''.
−
 
+
  
 
|-
 
|-
−
| 08:27
+
| 08:30
−
|Again press enter
+
|Again press '''Enter'''.
−
 
+
−
|-
+
−
| 08:29
+
−
| Now In the next line type '''mergePatchPairs'''
+
−
 
+
  
 
|-
 
|-
 
| 08:35
 
| 08:35
−
|Note that '''P here is capital'''
+
| Now, in the next line, type "mergePatchPairs".
  
 
|-
 
|-
−
| 08:37
+
| 08:38
−
| Press enter
+
|Note that 'P' here is capital.
−
 
+
  
 
|-
 
|-
−
| 08:39
+
| 08:40
−
|Insert a '''open bracket'''   press enter
+
| Press '''Enter'''.
  
 
|-
 
|-
−
| 08: 42
+
| 08:43
−
| Since there are '''no patches''' to be '''merged''' this can be kept empty
+
|Insert a open bracket,  press '''Enter'''.
−
 
+
  
 
|-
 
|-
 
| 08:46
 
| 08:46
−
|Insert a '''close bracket'''
+
| Since there are no '''patches''' to be merged, this can be kept empty.
−
 
+
  
 
|-
 
|-
 
| 08:48
 
| 08:48
−
|Insert a '''semi -colon '''and press enter
+
|Insert a close bracket.
  
 
|-
 
|-
−
| 08:51
+
| 08:50
−
|Let me switch back to the slides
+
|Insert a semi colon and press '''Enter'''.
−
 
+
  
 
|-
 
|-
 
| 08:54
 
| 08:54
−
|Similarly enter the '''co-ordinate''' points for the points in the '''front face''' of unit thickness of the '''geometry'''
+
|Let me switch back to the slides.
−
 
+
  
 
|-
 
|-
−
| 09:01
+
| 08:57
−
|as shown in the figure  
+
|Similarly, enter the co-ordinate points for the points in the front face of unit thickness of the geometry as shown in the figure.
−
 
+
−
 
+
−
 
+
−
 
+
−
|-
+
−
| 09:03
+
−
| Open a '''Command terminal'''
+
  
 
|-
 
|-
 
| 09:06
 
| 09:06
−
| In the '''command terminal''' type the path for your case file
+
| Now, open a '''Command terminal'''.
  
 
|-
 
|-
 
| 09:09
 
| 09:09
−
| I have already set the path for the '''tutorial case of flow over cylinder'''
+
| In the '''command terminal''', type the '''path''' for your case.
  
 
|-
 
|-
−
| 09:15
+
| 09:13
−
| In the '''terminal''' type '''blockMesh '''for '''meshing''' the geometry''' and press enter'''
+
| I have already set the '''path''' for the tutorial case of '''flow over cylinder'''.
−
 
+
  
 
|-
 
|-
−
| 09:23
+
| 09:17
−
|Meshing is done
+
| In the '''terminal''', type "blockMesh" for '''meshing''' the geometry and press '''Enter'''.
  
 
|-
 
|-
−
|09:25
+
| 09:25
−
|Now '''Type paraFoam''' in the terminal  and press enter to view the geometry
+
|'''Meshing''' is done.
  
 
|-
 
|-
−
|09:32
+
|09:33
−
| Let me drag this to the capture area
+
|Now, type "paraFoam" in the '''terminal'''  and press  '''Enter''' to view the geometry.
  
 
|-
 
|-
−
| 09:35
+
|09:39
−
| Now on  '''left-hand''' side of '''object inspector menu''' click '''Apply'''
+
| Let me drag this to the capture area.
−
 
+
  
 
|-
 
|-
−
| 09:42
+
| 09:43
−
|  '''geometry''' will be created as seen in the '''paraview window'''
+
| Now on left-hand side of '''object inspector menu''', click '''Apply'''.
  
 
|-
 
|-
−
| 09:47
+
| 09:49
−
| Scroll down the '''Object inspector menu'''
+
| Geometry will be created as seen in the '''paraview''' window.
  
 
|-
 
|-
−
|09:50
+
| 09:54
−
| '''Check or uncheck the Mesh field box'''
+
| Scroll down the '''Object inspector menu'''.
  
 
|-
 
|-
−
| 09:55
+
|09:57
−
| You can see '''different regions''' of the geometry.
+
| Check or uncheck the '''Mesh''' field box.
−
 
+
  
 
|-
 
|-
−
| 09:58
+
| 10:02
−
|You can also see the''' wire frame '''of the geometry
+
| You can see different regions of the geometry.
  
 
|-
 
|-
−
| 10:01
+
| 10:06
−
|On top of  the'''active variable control menu''' in the '''drop down menu'''
+
|You can also see the''' wire frame '''of the geometry.
−
 
+
  
 
|-
 
|-
−
| 10:07
+
| 10:09
−
|Change from '''Surface to wireframe'''
+
|On top of  the '''active variable control menu''',  in the drop down menu, change from '''Surface''' to '''wireframe'''.
  
 
|-
 
|-
−
| 10:11
+
| 10:18
−
| You can see the '''wireframe model''' of the geometry
+
| You can see the '''wireframe model''' of the geometry.
−
 
+
  
 
|-
 
|-
−
| 10:16
+
| 10:24
−
|close this. Let me switch back to the slides
+
|Close this. Let me switch back to the slides.
−
 
+
−
|-
+
−
| 10:21
+
−
| In this tutorial we learnt:
+
−
 
+
−
|-
+
−
| 10:23
+
−
|How to '''create a curved geometry'''.
+
−
 
+
−
 
+
−
|-
+
−
| 10:26
+
−
|How to '''enter points for edges in OpenFOAM'''
+
−
 
+
  
 
|-
 
|-
 
| 10:29
 
| 10:29
−
|This brings us to the end of the tutorial
+
| In this tutorial, we learnt:How to create a curved geometry.
  
 
|-
 
|-
−
|10:33
+
| 10:33
−
| As an Assignment
+
|How to enter points for edges in '''OpenFOAM'''.
−
 
+
  
 
|-
 
|-
−
| 10:34
+
| 10:37
−
|Create a geometry with '''inner semi-circle of radius 2 meters'''
+
|This brings us to the end of the tutorial.
−
 
+
  
 
|-
 
|-
−
| 10:39
+
|10:41
−
|'''and outer semi- circle of radius 4 meters'''
+
| As an Assignment-Create a geometry with inner semi-circle of radius 2 meters and outer semi- circle of radius 4 meters and view the geometry in '''paraview'''.
−
 
+
−
 
+
−
|-
+
−
| 10:44
+
−
|and View the geometry in '''paraview'''
+
  
 
|-
 
|-
−
| 10:48
+
| 10:55
 
| Watch the video available at this URL: http://spoken-tutorial.org/What_is_a_Spoken_Tutorial  
 
| Watch the video available at this URL: http://spoken-tutorial.org/What_is_a_Spoken_Tutorial  
  
 
|-
 
|-
−
| 10:51
+
| 10:58
 
|It summarizes the Spoken Tutorial project.  
 
|It summarizes the Spoken Tutorial project.  
  
 
|-
 
|-
−
| 10:53
+
| 11:01
 
|If you do not have good bandwidth, you can download and watch it.  
 
|If you do not have good bandwidth, you can download and watch it.  
  
 
|-
 
|-
−
| 10:58
+
| 11:06
−
| The Spoken Tutorial Project Team
+
| The Spoken Tutorial project team:
  
 
|-
 
|-
−
| 11:00
+
| 11:09
−
|-Conducts workshops using spoken tutorials
+
| Conducts workshops using spoken tutorials
  
 
|-
 
|-
−
| 11:04
+
| 11:11
−
|-Gives certificates to those who pass an online test
+
| Gives certificates to those who pass an online test.
  
 
|-
 
|-
−
| 11:07
+
| 11:15
−
|-For more details, please write to contact@spoken-tutorial.com
+
|For more details, please write to: '''contact@spoken-tutorial.com'''
  
 
|-
 
|-
−
| 11:15
+
|11:38
−
| Spoken Tutorials are part of Talk to a Teacher project,
+
|'''Spoken Tutorials''' are part of '''Talk to a Teacher''' project.
  
 
|-
 
|-
−
| 11:18
+
| 11:40
 
|It is supported by the National Mission on Education through ICT, MHRD, Government of India.  
 
|It is supported by the National Mission on Education through ICT, MHRD, Government of India.  
  
 
|-
 
|-
−
| 11:24
+
| 11:45
−
|More information on the same is available at the following URL link http://spoken-tutorial.org/NMEICT-Intro
+
|More information on this mission is available at this  link:
 +
http://spoken-tutorial.org/NMEICT-Intro
  
 
|-
 
|-
−
| 11:29
+
| 11:50
−
|  This is Rahul Joshi from IIT BOMBAY signing off. Thanks for joining
+
|  This is Rahul Joshi from '''IIT Bombay''', signing off. Thanks for joining
  
 
|}
 
|}

Latest revision as of 11:51, 11 April 2019

Time Narration
00:01 Hello and welcome to the spoken tutorial on Creating Curved geometry in OpenFOAM.
00:06 In this tutorial, I will show you:
00:09 Steps for creating a curved geometry in openfoam.
00:14 Viewing the results in paraview
00:17 To record this tutorial,
00:19 I am using: Linux Operating system Ubuntu version 10.04, OpenFOAM version 2.1.0
00:28 ParaView version 3.12.0.
00:32 The tutorials were recorded using the versions specified in previous slide. Subsequently the tutorials were edited to latest versions. To install latest system requirements go to Installation Sheet
00:37 We will create a geometry for flow over a cylinder.
00:41 Note that I am using this case just for explanation.
00:46 The cylinder is in the form of a semi circle.
00:50 Meshing is a body fitted grid.
00:54 The entire geometry is divided into blocks.
00:59 We break the semi circle into equal number of parts.
01:03 Now minimize this.
01:08 Open a 'blockMeshDict' file of the previous tutorial.
01:13 I have already opened it.
01:17 Scroll down. For simple geometries, you can see that edges is kept empty.
01:25 Now Create a new 'blockMeshDict' file.
01:28 To do this, let us minimize this first.
01:32 Now, right-click > create document > empty file.
01:39 Name this as 'blockMeshDict'.
01:45 Note that M and D here are capital.
01:51 Open this.
01:56 Now you can copy the initial few lines from the 'lid driven cavity' up to 'convertTometers'.
02:03 Go up, copy this up to 'convertToMeters'.
02:09 Copy this and paste it in the new 'blockMeshDict' file.
02:17 Now, change the 'convert to meters' from point one to one.
02:23 As our geometry is in meters, we will keep this as one.
02:29 Now press Enter , press Enter again.
02:33 After this, you need to enter the co-ordinates of the geometry in vertices.
02:40 Let me switch back to the slide. Note that the points should be ordered in such a way starting from 0, 1, 2, 3, 4 and so on, as shown in the figure.
02:52 Minimize the slide. Now, type "vertices" in the 'blockMeshDict' file and press Enter.
03:01 Insert the open bracket and press Enter.
03:05 Now enter the co-ordinates of the geometry as shown in the diagram.
03:10 Let me switch back to the slides.
03:13 For explanation, I will use right half of the semi-circle.
03:17 Enter the values for the points in the figure starting from 0.
03:21 Let me switch back to the 'blockMeshDict' file.
03:25 Leave some space and enter the co-ordinates of point 0.
03:32 Open close bracket enter 0.5 (space) 0 (space) 0. Press Enter.
03:41 Again leave some space , open close bracket.
03:44 Enter the co-ordinates for point 1 (space) 0 (space) 0. Press Enter.
03:50 Now leave two vertical spaces, again press Enter, again press Enter.
03:56 Leave some space and enter the co-ordinates for point number 4.
04:02 Open close bracket, enter 0.707 (space) 0.707 (space) 0
04:10 Press Enter. Leave some space.
04:14 Open close bracket.Enter the co-ordinates for the point 5.
04:18 Enter 0.353 (space) 0.353 (space) 0, press Enter.
04:27 Now, leave 4 vertical spaces and enter co-ordinates for point number 9.
04:32 1 2 3 4 , again press Enter, leave some space.
04:37 Open, close bracket.
04:41 Enter 0 (space) 1 (space) 0, press Enter.
04:47 Leave some space.
04:48 Enter the co-ordinates for point number 10.
04:49 Open close bracket 0 (space) 0.5 (space) 0 press Enter.
04:57 Similarly enter the co-ordinates for the remaining points in the geometry.
05:03 Insert a close bracket put a semi-colon and press Enter.
05:08 Again press Enter.Now, type "blocks", press Enter.
05:16 Insert an open bracket, press Enter.
05:19 Let me switch back to the slides
05:23 The block numbers are circled as shown in the figure.
05:27 Now let me switch back to the 'blockMeshDict file'.
05:31 Leave some space.
05:33 Now enter the type of the block i.e. Hex, leave some space.
05:41 Now enter the points for the blocks.
05:46 Open, close brackets.
05:48 Leave some space, open close brackets, leave some space the simple Grading can be kept as (1 1 1) and press Enter.
06:04 For creating the blocks, please refer to the tutorial on creating simple geometry in OpenFOAM.
06:11 Note that there will be more number of blocks in this example.
06:16 Now, insert a close bracket.
06:19 Insert a semi-colon, and press Enter. Again press Enter.
06:25 In the next line, type "edges" and press Enter.
06:31 Insert a open bracket and press Enter.
06:35 Here you need to enter the points which are the end points of the arcs.
06:40 Leave some space and type "arc". Leave some space, type the points which are the end points of the arc.
06:49 Let me switch back to the slide. Now, insert the end points of the arc
06:55 In this figure, we start with arc 0 5.
07:02 Let me switch back to the 'blockMeshDict file'.
07:06 Enter 0 space 5.
07:09 Leave some space. Insert open, close bracket.
07:12 In the bracket, enter the co-ordinates of any intermediate point in between the two arc points.
07:20 Now, let me switch back again to slides.
07:23 In the figure, you can see that you have to pick up a point in between the two end points of the arc.
07:32 In this geometry, I have picked up right half of the circle.
07:37 Using simple geometric relations, you can find the co-ordinates of the intermediate points as shown in the semi-circle.
07:47 Similarly you can repeat the procedure for rest of the semi-circle geometry.
07:54 Now, let me switch back to the 'blockMeshDict file'.
07:57 Press Enter.
07:59 Note that there are more number of arcs in this example.
08:04 Insert a close bracket.
08:07 Insert a semi -colon, press Enter, again press Enter.
08:11 Now enter the boundary patches after arcs.
08:15 Refer to the tutorial on Simple geometry in OpenFOAM, for entering the boundary patches.
08:21 Enter "boundary", press Enter.
08:24 Insert open bracket press Enter. Insert close bracket semi-colon, press Enter.
08:30 Again press Enter.
08:35 Now, in the next line, type "mergePatchPairs".
08:38 Note that 'P' here is capital.
08:40 Press Enter.
08:43 Insert a open bracket, press Enter.
08:46 Since there are no patches to be merged, this can be kept empty.
08:48 Insert a close bracket.
08:50 Insert a semi colon and press Enter.
08:54 Let me switch back to the slides.
08:57 Similarly, enter the co-ordinate points for the points in the front face of unit thickness of the geometry as shown in the figure.
09:06 Now, open a Command terminal.
09:09 In the command terminal, type the path for your case.
09:13 I have already set the path for the tutorial case of flow over cylinder.
09:17 In the terminal, type "blockMesh" for meshing the geometry and press Enter.
09:25 Meshing is done.
09:33 Now, type "paraFoam" in the terminal and press Enter to view the geometry.
09:39 Let me drag this to the capture area.
09:43 Now on left-hand side of object inspector menu, click Apply.
09:49 Geometry will be created as seen in the paraview window.
09:54 Scroll down the Object inspector menu.
09:57 Check or uncheck the Mesh field box.
10:02 You can see different regions of the geometry.
10:06 You can also see the wire frame of the geometry.
10:09 On top of the active variable control menu, in the drop down menu, change from Surface to wireframe.
10:18 You can see the wireframe model of the geometry.
10:24 Close this. Let me switch back to the slides.
10:29 In this tutorial, we learnt:How to create a curved geometry.
10:33 How to enter points for edges in OpenFOAM.
10:37 This brings us to the end of the tutorial.
10:41 As an Assignment-Create a geometry with inner semi-circle of radius 2 meters and outer semi- circle of radius 4 meters and view the geometry in paraview.
10:55 Watch the video available at this URL: http://spoken-tutorial.org/What_is_a_Spoken_Tutorial
10:58 It summarizes the Spoken Tutorial project.
11:01 If you do not have good bandwidth, you can download and watch it.
11:06 The Spoken Tutorial project team:
11:09 Conducts workshops using spoken tutorials
11:11 Gives certificates to those who pass an online test.
11:15 For more details, please write to: contact@spoken-tutorial.com
11:38 Spoken Tutorials are part of Talk to a Teacher project.
11:40 It is supported by the National Mission on Education through ICT, MHRD, Government of India.
11:45 More information on this mission is available at this link:

http://spoken-tutorial.org/NMEICT-Intro

11:50 This is Rahul Joshi from IIT Bombay, signing off. Thanks for joining

Contributors and Content Editors

DeepaVedartham, Gaurav, PoojaMoolya, Sandhya.np14, Sneha

Retrieved from "https://script.spoken-tutorial.org/index.php?title=OpenFOAM/C2/Creating-curved-geometry-in-OpenFOAM/English-timed&oldid=46944"