Difference between revisions of "Blender/C2/3D-Cursor/English-timed"

Latest revision as of 11:26, 13 September 2017

Time	Narration
00:03	Welcome to the series of Blender Tutorials.
00:07	This tutorial is about the 3D Cursor in Blender 2.59.
00:15	This script has been contributed by Chirag Raman and edited by Monisha Banerjee.
00:25	After watching this tutorial, we shall learn- what is 3D cursor?
00:32	How to add new objects to the 3D view in Blender using 3D cursor and the snapping options for 3D cursor in Blender.
00:46	I assume that you already know how to install Blender on your system.
00:51	If not, please refer to our earlier tutorials on Installing Blender.
00:57	The 3D Cursor is the red and white ring with the cross-hair that you see at the centre of the Blender screen.
01:06	Let us see the 3D cursor in Blender. To do that, we need to open Blender.
01:12	There are two ways to open Blender.
01:15	First, go to the Blender icon on the desktop. Right-click the Blender icon. Left-click Open.
01:27	The second and easier way to open Blender is left double-click the Blender icon on the desktop.
01:42	This is Blender 2.59. Please note that the screen resolution shown here is 1024 by 768 pixels.
01:54	The font size in the Blender interface has been increased so that you can understand all the options given.
02:01	To learn how to increase the Interface font size, please see the tutorial on User Preferences.
02:12	This is known as the welcome page or splash screen. It shows some useful reference links for learning about Blender.
02:20	To remove the splash screen, press ESC on your keyboard or
02:25	left-click mouse anywhere on the Blender interface other than splash screen.
02:32	Now you can see the default Blender workspace.
02:37	The 3D cursor is right at the centre of the screen, surrounded by the cube.
02:43	We can’t see the cursor properly, so we must delete the cube.
02:48	By default, the cube is already selected.
02:51	To delete it, press the Delete button on the keyboard. Left-click Delete.
02:58	There, you might be able to see the 3D cursor better now.
03:04	The primary purpose of the 3D Cursor is to specify the location of a new object added to the 3D scene.
03:15	Go to ADD >> Mesh. Left-click Cube.
03:19	You can also use key board shortcut shift & A to add new objects to the 3D view.
03:27	A new cube is added to the 3D view.
03:30	As you can see, the new cube has appeared on the same location as the 3D cursor.
03:38	Now, let us see how we can add a new object to a new location.
03:44	First, we need to move the 3D cursor to a new location.
03:48	To do this, left-click at any location in the 3D space.
03:53	I am clicking to the left side of the cube.
03:59	Shift & A to add a new object, Mesh. Left-click UV sphere.
04:10	The UV sphere appears at the new location of the 3D cursor.
04:15	Now, we shall see the snapping options for the 3D cursor.
04:22	Go to Object. Go to Snap. This is the Snap menu.
04:29	There are various options here.
04:31	You can also use the keyboard shortcut Shift & S.
04:38	Selection to cursor snaps the selected item to the 3D cursor.
04:45	For example, let us snap the cube to the 3D cursor.
04:50	Right-click on the cube. Shift & S to pull up the snap menu.
04:58	Left-click Selection to cursor. The cube snaps to the 3D cursor.
05:06	Now let's move the cube to the right. Left-click green handle, hold and drag your mouse to the right.
05:17	For keyboard shortcut, Press G&Y.
05:23	To learn more about moving objects in the 3D view, see the tutorial on Basic description of Blender interface.
05:35	Shift & S to pull up the snap menu. Left-click Cursor to Selected.
05:43	The 3D cursor snaps to the centre of the cube in the new location.
05:50	In case you have more than 1 object selected at the same time, say the cube and the UV sphere here,
05:59	Cursor to selected snaps the 3D cursor at the centre of the two objects selected.
06:07	Let me demonstrate. As you can see, the cube is already selected.
06:12	Shift plus right click to select the UV sphere. So now, you have two objects selected at the same time.
06:22	Shift & S to pull up the snap menu. Click Cursor to selected.
06:30	The 3D cursor snaps to the centre of the two selected objects.
06:36	Now, Shift plus right click the lamp. Shift & S to pull up the snap menu.
06:47	Click Cursor to Selected. The 3D cursor snaps to the centre of the 3 selected objects.
06:58	Click on any point in the 3D view to move the 3D cursor. I am clicking to the bottom right.
07:07	Shift & S to pull up the snap menu.
07:12	Click Cursor to Center. The 3D cursor snaps to the centre of the 3D view.
07:22	Press A on the keyboard to deselect the objects.
07:28	Now, right-click the UV sphere. Press A to deselect it.
07:39	Shift & S to pull up the snap menu.
07:44	Click Cursor to active.
07:47	The 3D cursor snaps to the centre of the UV sphere, the last active selection.
07:56	The 3D cursor provides additional benefits when used as a pivot point while modeling
08:03	but we shall look at that in later tutorials.
08:08	Now, try to add new objects to the 3D view in different locations using the 3D cursor.
08:16	After that, explore the snapping options in the snap menu. All the best!
08:26	So, that wraps up our tutorial on Blender’s 3D Cursor.
08:31	This tutorial is created by Project Oscar and supported by the National Mission on Education through ICT.
08:40	More information on the same is available at the following links- oscar.iitb.ac.in and spoken-tutorial.org/NMEICT-Intro.
09:00	The Spoken Tutorial Project:
09:02	conducts workshops using spoken tutorials;
09:06	also gives certificates to those who pass an online test.
09:11	For more details, please contact contact@spoken-tutorial.org
09:17	Thanks for joining us.
09:19	And this is Monisha from IIT Bombay, signing off.

Contributors and Content Editors

Kavita salve, PoojaMoolya, Pratik kamble, Sandhya.np14, Sneha, Yogananda.india

Difference between revisions of "Blender/C2/3D-Cursor/English-timed"

Latest revision as of 11:26, 13 September 2017

Contributors and Content Editors

Navigation menu

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Tools

@@ Line 9: / Line 9: @@
 | 00:03
-| Welcome to the series of '''Blender Tutorial'''s.
+| Welcome to the series of '''Blender Tutorials'''.
 |-
 | 00:07
 | This tutorial is about the '''3D Cursor''' in '''Blender 2.59'''.
 |-
 |00:15
 | This script has been contributed by Chirag Raman and edited by Monisha Banerjee.
 |-
 | 00:25
 | After watching this tutorial, we shall learn- what is '''3D cursor'''?
 |-
 | 00:32
 | How to add new objects to the '''3D view''' in '''Blender''' using '''3D cursor''' and the '''snapping''' options for '''3D cursor''' in '''Blender'''.
 |-
 | 00:46
 | I assume that you already know how to install '''Blender''' on your system.
 |-
 |00:51
 | If not, please refer to our earlier tutorials on '''Installing Blender'''.
 |-
 | 00:57
 | The '''3D Cursor''' is the red and white ring with the cross-hair that you see at the centre of the '''Blender screen'''.
 |-
 | 01:06
 | Let us see the '''3D cursor''' in '''Blender'''. To do that, we need to open Blender.
 |-
 | 01:12
 |There are two ways to open '''Blender'''.
 |-
 |01:15
 |First, go to the''' Blender icon''' on the desktop. Right-click the''' Blender icon'''. Left-click '''Open'''.
 |-
 |01:27
 |The second and easier way to open Blender is left double-click the '''Blender icon''' on the desktop.
 |-
 |01:42
 |This is '''Blender 2.59'''. Please note that the screen resolution shown here is''' 1024 by 768 pixels'''.
 |-
 | 01:54
 | The '''font size''' in the '''Blender interface''' has been increased so that you can understand all the options given.
 |-
 | 02:01
 | To learn how to increase the '''Interface''' font size,  please see the tutorial on '''User Preferences'''.
 |-
 |02:12
 |This is known as the welcome page or '''splash screen'''.  It shows some useful '''reference links''' for learning about Blender.
 |-
 | 02:20
 | To remove the splash screen, press '''ESC''' on your keyboard or
 |-
 | 02:25
 | left-click  '''mouse''' anywhere on the '''Blender interface''' other than splash screen.
 |-
 | 02:32
 | Now you can see the''' default Blender workspace'''.
 |-
 |02:37
+| The '''3D cursor''' is right at the centre of the screen, surrounded by the '''cube'''.
-| The '''3D cursor''' is  right at the centre of the screen, surrounded by the '''cube''' .
 |-
 | 02:43
 |We can’t see the cursor properly, so we must delete the '''cube'''.
 |-
 | 02:48
 | By default, the cube is already selected.
 |-
 | 02:51
 | To delete it, press the '''Delete''' button on the keyboard. Left-click '''Delete'''.
 |-
 | 02:58
 | There, you might be able to see the''' 3D cursor''' better now.
 |-
 | 03:04
 | The primary purpose of the '''3D Cursor''' is to specify the location of a new object added to the 3D scene.
 |-
 | 03:15
 | Go to '''ADD''' >> '''Mesh'''. Left-click '''Cube'''.
 |-
 | 03:19
 | You can also use key board shortcut '''shift & A''' to add new objects to the '''3D view'''.
 |-
 | 03:27
 | A new '''cube''' is added to the '''3D view'''.
 |-
 | 03:30
 | As you can see, the new '''cube''' has appeared on the same location as the '''3D cursor'''.
 |-
 |03:38
 | Now, let us see how we can add a new '''object''' to a new location.
 |-
 | 03:44
 | First, we need to move the '''3D cursor''' to a new location.
 |-
 |03:48
 | To do this, left-click at any location in the '''3D space'''.
 |-
 |03:53
+| I am clicking to the left side of the cube.
-| I am clicking to the left side  of the cube.
 |-
 |03:59
 | '''Shift & A''' to add a new object, '''Mesh'''. Left-click '''UV sphere'''.
 |-
 | 04:10
+| The '''UV sphere''' appears at the new location of the 3D cursor.
-| The '''UV sphere''' appears at the  new location  of the 3D cursor.
 |-
 | 04:15
 | Now, we shall see the snapping options for the 3D cursor.
 |-
 |04:22
 | Go to '''Object'''. Go to''' Snap'''. This is the '''Snap''' menu.
 |-
 | 04:29
 | There are various options here.
 |-
 | 04:31
 | You can also use the keyboard shortcut''' Shift & S'''.
 |-
 | 04:38
 | '''Selection to cursor''' snaps the selected item to the 3D cursor.
 |-
 | 04:45
 | For example, let us '''snap''' the '''cube''' to the 3D cursor.
 |-
 | 04:50
 | Right-click on the '''cube'''. '''Shift & S''' to pull up the '''snap menu'''.
 |-
 | 04:58
 | Left-click '''Selection to cursor'''. The '''cube''' snaps to the 3D cursor.
 |-
 | 05:06
+| Now let's move the cube to the right. Left-click''' green handle''', hold and drag your mouse to the right.
-| Now let's move the cube to the  right . Left-click''' green handle''', hold and drag your mouse to the right.
 |-
 | 05:17
 | For keyboard shortcut, Press''' G&Y.'''
 |-
 | 05:23
 | To learn more about moving objects in the '''3D view''', see the tutorial on '''Basic description of Blender interface'''.
 |-
 | 05:35
 |''' Shift & S''' to pull up the snap menu. Left-click '''Cursor to Selected'''.
 |-
 | 05:43
+| The 3D cursor snaps to the centre of the '''cube''' in the new location.
-| The 3D cursor snaps to the centre of the '''cube''' in the  new location .
 |-
 | 05:50
 | In case you have more than 1 object selected at the same time, say the '''cube''' and the '''UV sphere''' here,
 |-
 | 05:59
 |''' Cursor to selected''' snaps the 3D cursor at the centre of the two objects selected.
 |-
 | 06:07
 | Let me demonstrate. As you can see, the cube is already selected.
 |-
 | 06:12
 |''' Shift plus right''' click to select the '''UV sphere'''. So now, you have two objects selected at the same time.
 |-
 | 06:22
 |''' Shift & S''' to pull up the snap menu. Click''' Cursor to selected'''.
 |-
 | 06:30
 | The 3D cursor snaps to the centre of the two selected objects.
 |-
 | 06:36
 | Now, '''Shift plus right''' click the''' lamp'''. '''Shift & S''' to pull up the '''snap menu'''.
 |-
 | 06:47
 | Click''' Cursor to Selected'''. The 3D cursor snaps to the centre of the 3 selected objects.
 |-
 | 06:58
 | Click on any point in the '''3D view''' to move the 3D cursor. I am clicking to the bottom right.
 |-
 | 07:07
 |''' Shift & S''' to pull up the '''snap''' menu.
 |-
 | 07:12
 | Click '''Cursor to Center'''. The '''3D cursor''' snaps to the centre of the '''3D view'''.
 |-
 | 07:22
+| Press '''A''' on the keyboard to '''deselect''' the objects.
-| Press 'A' on the keyboard to '''deselect''' the objects.
 |-
 | 07:28
+| Now, right-click the '''UV sphere'''. Press '''A''' to deselect it.
-| Now, right-click the '''UV sphere'''. Press 'A' to deselect it.
 |-
 |07:39
 | '''Shift & S''' to pull up the '''snap''' menu.
 |-
 |07:44
 | Click''' Cursor to active'''.
 |-
 | 07:47
+| The 3D cursor snaps to the centre of the '''UV sphere''', the last active selection.
-| The 3D cursor snaps to the centre  of the '''UV sphere''', the last active selection.
 |-
 | 07:56
 | The '''3D cursor''' provides additional benefits when used as a pivot point while '''modeling'''
 |-
 | 08:03
 | but we shall look at that in later tutorials.
 |-
 | 08:08
 | Now, try to add new '''object'''s to the '''3D view''' in different locations using the '''3D cursor'''.
 |-
 | 08:16
 | After that, explore the snapping options in the '''snap''' menu. All the best!
 |-
 | 08:26
 | So, that wraps up our tutorial on Blender’s '''3D Cursor'''.
 |-
 | 08:31
 | This tutorial is created by '''Project Oscar''' and supported by the National Mission on Education through ICT.
 |-
 | 08:40
 | More information on the same is available at the following links- oscar.iitb.ac.in and spoken-tutorial.org/NMEICT-Intro.
 |-
 |09:00
 | The Spoken Tutorial Project:
 |-
 | 09:02
 | conducts workshops using spoken tutorials;
 |-
 | 09:06
 | also gives certificates to those who pass an online test.
 |-
 | 09:11
 | For more details, please contact''' contact@spoken-tutorial.org'''
 |-
 | 09:17
 | Thanks for joining us.
 |-
 | 09:19
 |And this is Monisha from IIT Bombay, signing off.