Difference between revisions of "QCad/C2/Introduction-to-QCAD/English-timed"

From Script | Spoken-Tutorial
Jump to: navigation, search
Line 2: Line 2:
 
|| ''Time'''
 
|| ''Time'''
 
|| '''Narration'''
 
|| '''Narration'''
−
 
 
|-
 
|-
 
|'''00:00  
 
|'''00:00  
 
| '''Hello and welcome to the tutorial Introduction to QCAD -2D drafting tool.  
 
| '''Hello and welcome to the tutorial Introduction to QCAD -2D drafting tool.  
−
 
 
|-
 
|-
 
|'''00:04 '''
 
|'''00:04 '''
 
|In this tutorial I will introduce you to the basics of QCAD tool and its interface.
 
|In this tutorial I will introduce you to the basics of QCAD tool and its interface.
−
 
 
|-
 
|-
 
|  '''00:11 '''
 
|  '''00:11 '''
 
| |Let's look at what is QCAD?  
 
| |Let's look at what is QCAD?  
−
 
−
 
  
 
|-
 
|-
Line 21: Line 16:
 
|It is an application for computer aided drafting(CAD) in two dimensions.  
 
|It is an application for computer aided drafting(CAD) in two dimensions.  
  
−
 
−
 
 
|-
 
|-
 
|'''00:16'''
 
|'''00:16'''
 
|Using QCAD you can create technical drawings such as plans for buildings, interiors, mechanical parts or schemas and diagrams.  
 
|Using QCAD you can create technical drawings such as plans for buildings, interiors, mechanical parts or schemas and diagrams.  
−
 
  
 
|-
 
|-
Line 35: Line 27:
 
|  '''00:31'''
 
|  '''00:31'''
 
|For this tutorial, I am using GNU Linux operating system Ubuntu Version 10.04 LTS  
 
|For this tutorial, I am using GNU Linux operating system Ubuntu Version 10.04 LTS  
−
 
−
 
  
 
|-
 
|-
 
|'''00:38'''  
 
|'''00:38'''  
 
|and QCAD Community Edition Version 2.0.5.0
 
|and QCAD Community Edition Version 2.0.5.0
−
 
−
 
  
 
|-
 
|-
 
|'''00:41 '''
 
|'''00:41 '''
 
|If you do not have it installed on your system,  
 
|If you do not have it installed on your system,  
−
 
−
 
  
 
|-
 
|-
 
|'''00:47'''  
 
|'''00:47'''  
 
|you can do so by going to System->Administration->Synaptic Package Manager and  
 
|you can do so by going to System->Administration->Synaptic Package Manager and  
−
 
−
 
  
 
|-
 
|-
 
|'''00:55'''  
 
|'''00:55'''  
 
|at the search box look for QCAD.  
 
|at the search box look for QCAD.  
−
 
  
 
|-
 
|-
 
|'''00:58'''
 
|'''00:58'''
 
| And install these applications
 
| And install these applications
−
 
−
 
  
 
|-
 
|-
 
|'''01:01'''
 
|'''01:01'''
 
|For more information on how to install software using synaptic,
 
|For more information on how to install software using synaptic,
−
 
  
 
|-
 
|-
 
|'''01:05'''  
 
|'''01:05'''  
 
|please refer to spoken tutorial available on this website: www.spoken-tutorial.org
 
|please refer to spoken tutorial available on this website: www.spoken-tutorial.org
−
 
−
 
  
 
|-
 
|-
Line 82: Line 60:
 
|Once installed to start QCAD in Ubuntu 10.04 go to Applications->Accessories->terminal  
 
|Once installed to start QCAD in Ubuntu 10.04 go to Applications->Accessories->terminal  
  
−
 
+
|-
−
 
+
−
|-
+
 
|'''01:17'''
 
|'''01:17'''
 
|and at the prompt type “qcad” and hit 'Enter'  
 
|and at the prompt type “qcad” and hit 'Enter'  
−
 
−
 
  
 
|-
 
|-
 
|'''01:21'''  
 
|'''01:21'''  
 
|This will launch the application in 10.04 version.  
 
|This will launch the application in 10.04 version.  
−
 
  
  
Line 100: Line 73:
 
|For other Ubuntu versions it is available under Applications menu.
 
|For other Ubuntu versions it is available under Applications menu.
  
−
 
 
|-
 
|-
 
|'''01:28'''  
 
|'''01:28'''  
 
|In this tutorial we will see  
 
|In this tutorial we will see  
−
 
−
 
  
 
|-
 
|-
Line 124: Line 94:
 
|'''01:40'''
 
|'''01:40'''
 
| It has a standard menu bar on top.  
 
| It has a standard menu bar on top.  
−
 
−
 
  
 
|-
 
|-
 
|'''01:42'''
 
|'''01:42'''
 
| Options like Draw, Dimension, Modify and Snap are QCAD specific.  
 
| Options like Draw, Dimension, Modify and Snap are QCAD specific.  
−
 
−
 
  
 
|-
 
|-
 
|'''01:47'''
 
|'''01:47'''
 
| On the left side is the tool bar, which is used to draw objects.  
 
| On the left side is the tool bar, which is used to draw objects.  
−
 
−
 
  
 
|-
 
|-
 
|'''01:53 '''
 
|'''01:53 '''
 
|At the very bottom is the status bar which displays various information about the current drawing.  
 
|At the very bottom is the status bar which displays various information about the current drawing.  
−
 
−
 
  
 
|-
 
|-
Line 149: Line 111:
 
|Notice as my mouse is moving in the drawing area.
 
|Notice as my mouse is moving in the drawing area.
  
−
 
+
|-
−
 
+
−
|-
+
 
|'''02:02'''
 
|'''02:02'''
 
|Coordinate widget on the extreme left side is displaying absolute and relative position of my mouse cursor.
 
|Coordinate widget on the extreme left side is displaying absolute and relative position of my mouse cursor.
−
 
−
 
  
 
|-
 
|-
 
|'''02:10'''  
 
|'''02:10'''  
 
|Just above the status bar is the command line for QCad.  
 
|Just above the status bar is the command line for QCad.  
−
 
−
 
  
 
|-
 
|-
 
|'''02:13'''
 
|'''02:13'''
 
| Which is used to put in exact co-ordinates to draw objects.
 
| Which is used to put in exact co-ordinates to draw objects.
−
 
  
 
|-
 
|-
 
|'''02:18'''
 
|'''02:18'''
 
|At the right side is the layer list and the block list.  
 
|At the right side is the layer list and the block list.  
−
 
−
 
  
 
|-
 
|-
Line 178: Line 131:
 
|These list the layers and blocks related information for the current drawing.  
 
|These list the layers and blocks related information for the current drawing.  
  
−
 
+
|-
−
 
+
−
|-
+
 
|'''02:26'''
 
|'''02:26'''
 
|We will look at these in detail in subsequent tutorials.
 
|We will look at these in detail in subsequent tutorials.
−
 
−
 
  
 
|-
 
|-
 
|'''02:30'''  
 
|'''02:30'''  
 
|Right in the middle is the drawing area.  
 
|Right in the middle is the drawing area.  
−
 
−
 
  
 
|-
 
|-
 
|'''02:33'''  
 
|'''02:33'''  
−
|Black in colour with dots.
+
|Black in color with dots.
−
 
+
−
 
+
  
 
|-
 
|-
 
|'''02:35'''  
 
|'''02:35'''  
 
|Dots signify the grid, at any time you can choose not to view grid by going on to top option and click on this 'grid' icon to not to show the grid.
 
|Dots signify the grid, at any time you can choose not to view grid by going on to top option and click on this 'grid' icon to not to show the grid.
−
 
−
 
  
 
|-
 
|-
 
|'''02:47'''  
 
|'''02:47'''  
 
|Click it back again to make it visible.
 
|Click it back again to make it visible.
−
 
−
 
  
 
|-
 
|-
 
|'''02:50'''
 
|'''02:50'''
 
|Similarly all other windows as status bar, command line, block and lists can be enabled / disabled going to top menu View.->Views
 
|Similarly all other windows as status bar, command line, block and lists can be enabled / disabled going to top menu View.->Views
−
 
−
 
  
 
|-
 
|-
Line 223: Line 162:
 
| '''03:06'''  
 
| '''03:06'''  
 
|QCAD uses Cartesian and polar coordinates system to draw objects.  
 
|QCAD uses Cartesian and polar coordinates system to draw objects.  
−
 
−
 
  
 
|-
 
|-
 
|'''03:11'''
 
|'''03:11'''
 
| To draw objects we use tool bar from left or this can also be accessed from top menu → Draw option.
 
| To draw objects we use tool bar from left or this can also be accessed from top menu → Draw option.
−
 
−
 
  
 
|-
 
|-
 
|'''03:19'''
 
|'''03:19'''
 
| Let's start by drawing a line. From the tool bar click on the line icon.
 
| Let's start by drawing a line. From the tool bar click on the line icon.
−
 
  
 
|-
 
|-
 
|'''03:23'''
 
|'''03:23'''
 
| There are numerous options to choose from
 
| There are numerous options to choose from
−
 
  
 
|-
 
|-
 
|'''03:26'''  
 
|'''03:26'''  
 
|Let's click on line with two points. Notice the command prompt is asking to specify first point.
 
|Let's click on line with two points. Notice the command prompt is asking to specify first point.
−
 
−
 
  
 
|-
 
|-
 
|'''03:29 '''
 
|'''03:29 '''
 
|Move your mouse cursor on the drawing area.
 
|Move your mouse cursor on the drawing area.
−
 
−
 
  
 
|-
 
|-
 
|'''03:36'''
 
|'''03:36'''
 
| There are two things happening now  
 
| There are two things happening now  
−
 
−
 
  
 
|-
 
|-
 
|'''03:37 '''
 
|'''03:37 '''
 
|1. mouse cursor has changed into white cross hair.
 
|1. mouse cursor has changed into white cross hair.
−
 
−
 
−
 
  
 
|-
 
|-
 
|'''03:43'''  
 
|'''03:43'''  
 
|2.There is blue circle appearing right below the mouse cursor
 
|2.There is blue circle appearing right below the mouse cursor
−
 
  
 
|-
 
|-
 
|'''03:46'''  
 
|'''03:46'''  
 
|It is basically hopping from grid to grid as I move my mouse, waiting for me to select.
 
|It is basically hopping from grid to grid as I move my mouse, waiting for me to select.
−
 
−
 
  
 
|-
 
|-
 
|'''03:51'''
 
|'''03:51'''
 
| I can click left mouse button to click for the start of the line
 
| I can click left mouse button to click for the start of the line
−
 
  
 
|-
 
|-
 
|'''03:58'''
 
|'''03:58'''
 
| and click again to for the line to end. Line is drawn.  
 
| and click again to for the line to end. Line is drawn.  
−
 
−
 
  
 
|-
 
|-
 
|'''04:04'''
 
|'''04:04'''
 
| Notice if I keep clicking further it will start drawing line, as QCAD is still in line command.  
 
| Notice if I keep clicking further it will start drawing line, as QCAD is still in line command.  
−
 
−
 
  
 
|-
 
|-
 
|'''04:10'''  
 
|'''04:10'''  
 
|For this I need to come out of that command
 
|For this I need to come out of that command
−
 
−
 
  
 
|-
 
|-
Line 305: Line 219:
 
| To come out of any command you press either 'Enter' or 'Esc' button on keyboard twice or double click right mouse button.  
 
| To come out of any command you press either 'Enter' or 'Esc' button on keyboard twice or double click right mouse button.  
  
−
 
+
|-
−
 
+
−
|-
+
 
|'''04:21'''
 
|'''04:21'''
 
|You will be out of any command
 
|You will be out of any command
−
 
−
 
  
 
|-
 
|-
 
|'''04:23 '''
 
|'''04:23 '''
 
|Similarly you can draw Parallel lines, horizontal lines, vertical lines, parallel lines with distance.  
 
|Similarly you can draw Parallel lines, horizontal lines, vertical lines, parallel lines with distance.  
−
 
−
 
  
 
|-
 
|-
 
|'''04:31 '''
 
|'''04:31 '''
 
|'Let's see this option. When I choose this option I need to specify distance between the lines and number of lines.  
 
|'Let's see this option. When I choose this option I need to specify distance between the lines and number of lines.  
−
 
  
 
|-
 
|-
 
|'''04:40 '''
 
|'''04:40 '''
 
|let's say 10 here and no. of lines I want 3.  
 
|let's say 10 here and no. of lines I want 3.  
−
 
  
 
|-
 
|-
 
|'''04:47 '''
 
|'''04:47 '''
 
|You will move mouse cursor closer to entity in relation to which you would want parallel lines to be drawn.  
 
|You will move mouse cursor closer to entity in relation to which you would want parallel lines to be drawn.  
−
 
  
  
Line 338: Line 243:
 
|'''04:54'''  
 
|'''04:54'''  
 
|Once satisfied I can confirm selection by clicking on left mouse button, and lines will be drawn on the board.
 
|Once satisfied I can confirm selection by clicking on left mouse button, and lines will be drawn on the board.
−
 
−
 
  
 
|-
 
|-
 
|'''05:03'''
 
|'''05:03'''
 
| Now let us see the arc tool. From the tool bar choose arc.
 
| Now let us see the arc tool. From the tool bar choose arc.
−
 
  
 
|-
 
|-
 
|'''05:07 '''
 
|'''05:07 '''
−
|I am choosing arc with centre point and angles.  
+
|I am choosing arc with center point and angles.  
−
 
+
−
 
+
  
 
|-
 
|-
 
|'''05:13'''  
 
|'''05:13'''  
 
|From snapping option let's choose 'snap to grid'
 
|From snapping option let's choose 'snap to grid'
−
 
−
 
  
 
|-
 
|-
 
|'''05:17'''
 
|'''05:17'''
−
| Notice command prompt is asking to specify centre, left click to specify centre.  
+
| Notice command prompt is asking to specify center, left click to specify center.  
−
 
+
−
 
+
  
 
|-
 
|-
 
|'''05:22 '''
 
|'''05:22 '''
 
|Now it is asking to specify radius, I can enter say 30.  
 
|Now it is asking to specify radius, I can enter say 30.  
−
 
  
 
|-
 
|-
 
|'''05:27 '''
 
|'''05:27 '''
 
|Now specify start angle and click again for end angle and arc is drawn.  
 
|Now specify start angle and click again for end angle and arc is drawn.  
−
 
−
 
  
 
|-
 
|-
 
|'''05:32 '''
 
|'''05:32 '''
 
|Double click right mouse button to come out of that command.
 
|Double click right mouse button to come out of that command.
−
 
−
 
  
 
|-
 
|-
 
|'''05:35'''  
 
|'''05:35'''  
 
|Lets try and draw circle. Go to the circle icon from tool box, click on it. I am using circle with centre and radius.  
 
|Lets try and draw circle. Go to the circle icon from tool box, click on it. I am using circle with centre and radius.  
−
 
−
 
  
 
|-
 
|-
 
|'''05:44 '''
 
|'''05:44 '''
 
|Again from the snapping option choose 'snap to grid'.
 
|Again from the snapping option choose 'snap to grid'.
−
 
−
 
  
 
|-
 
|-
 
|'''05:48'''
 
|'''05:48'''
−
|Command line is asking to specify circle's centre.
+
|Command line is asking to specify circle's center.
−
 
+
−
 
+
  
 
|-
 
|-
 
|'''05:51'''  
 
|'''05:51'''  
−
|Go on the grid and left click to specify centre. Circle is drawn.
+
|Go on the grid and left click to specify center. Circle is drawn.
−
 
+
−
 
+
  
 
|-
 
|-
 
|'''05:56 '''
 
|'''05:56 '''
 
|It is drawn with previously specified radius. If I want to change I can change and draw new circle with different radius.
 
|It is drawn with previously specified radius. If I want to change I can change and draw new circle with different radius.
−
 
−
 
  
 
|-
 
|-
 
|'''06:06'''
 
|'''06:06'''
 
|Unless you come out of that command, it will keep on drawing circles.
 
|Unless you come out of that command, it will keep on drawing circles.
−
 
−
 
  
 
|-
 
|-
 
|'''06:10 '''
 
|'''06:10 '''
 
|'So double click right mouse button and you are out of that.
 
|'So double click right mouse button and you are out of that.
−
 
−
 
  
 
|-
 
|-
 
|'''06:13'''  
 
|'''06:13'''  
 
|Now that my drawing has become busier I can use zoom from top menu → view-> Zoom in to zoom in on the more details.
 
|Now that my drawing has become busier I can use zoom from top menu → view-> Zoom in to zoom in on the more details.
−
 
−
 
  
 
|-
 
|-
 
|'''06:24'''
 
|'''06:24'''
 
|and view-> Zoom out to see the wider extent.  
 
|and view-> Zoom out to see the wider extent.  
−
 
−
 
  
 
|-
 
|-
 
|'''06:26'''  
 
|'''06:26'''  
 
|Zoom is very essential command because it is very useful when you draw details.
 
|Zoom is very essential command because it is very useful when you draw details.
−
 
−
 
  
 
|-
 
|-
 
|'''06:32'''
 
|'''06:32'''
 
|Similar effects can be achieved by rolling a middle mouse button to zoom in and out  
 
|Similar effects can be achieved by rolling a middle mouse button to zoom in and out  
−
 
−
 
  
 
|-
 
|-
 
|'''06:37'''
 
|'''06:37'''
 
| Or I can also use View->(third option)Auto zoom to fit the drawing in the given area.
 
| Or I can also use View->(third option)Auto zoom to fit the drawing in the given area.
−
 
−
 
  
 
|-
 
|-
 
|'''06:44'''  
 
|'''06:44'''  
 
|Let's try drawing a new file, Let me clear this area.
 
|Let's try drawing a new file, Let me clear this area.
−
 
−
 
  
 
|-
 
|-
 
|'''06:50'''
 
|'''06:50'''
 
| For this I click at one corner select and then from top menu->modify->Delete selected.  
 
| For this I click at one corner select and then from top menu->modify->Delete selected.  
−
 
−
 
  
 
|-
 
|-
 
|'''06:58'''
 
|'''06:58'''
 
| Every drawing QCAD starts at absolute 0,0 position it is marked by red cross hair on the drawing area.  
 
| Every drawing QCAD starts at absolute 0,0 position it is marked by red cross hair on the drawing area.  
−
 
−
 
  
 
|-
 
|-
 
|'''07:05'''
 
|'''07:05'''
 
|'Every other point is drawn in relation with this point.
 
|'Every other point is drawn in relation with this point.
−
 
−
 
  
 
|-
 
|-
 
|'''07:11'''  
 
|'''07:11'''  
 
|Before starting any drawing it is important to set drawing preferences' for QCAD to know which units you are using, what grid size you would want.
 
|Before starting any drawing it is important to set drawing preferences' for QCAD to know which units you are using, what grid size you would want.
−
 
−
 
  
 
|-
 
|-
Line 489: Line 346:
  
 
'''Application preferences'''
 
'''Application preferences'''
−
 
  
 
|-
 
|-
 
|'''07:25'''
 
|'''07:25'''
 
|Are the ones which apply to entire QCAD application, rather than just a single drawing
 
|Are the ones which apply to entire QCAD application, rather than just a single drawing
−
 
−
 
  
 
|-
 
|-
 
|'''07:32'''  
 
|'''07:32'''  
 
|You can change background, grid colour, meta colour, language options and set the default Units that you want.
 
|You can change background, grid colour, meta colour, language options and set the default Units that you want.
−
 
  
  
Line 506: Line 359:
 
|'''07:42'''  
 
|'''07:42'''  
 
|Lets say 'meter' here and click 'OK'.
 
|Lets say 'meter' here and click 'OK'.
−
 
−
 
  
 
|-
 
|-
 
|'''07:46'''
 
|'''07:46'''
 
|Now let's go to Edit ->set '''Current Drawing preferences''': These apply only to current drawing and once you close the drawing these needs to be set again.
 
|Now let's go to Edit ->set '''Current Drawing preferences''': These apply only to current drawing and once you close the drawing these needs to be set again.
−
 
−
 
  
 
|-
 
|-
 
|'''07:57 '''
 
|'''07:57 '''
 
|Paper applies only when we want to print a drawing.
 
|Paper applies only when we want to print a drawing.
−
 
−
 
  
 
|-
 
|-
 
|'''08:00'''  
 
|'''08:00'''  
 
|Units: You can set units for that particular drawing, let's say 'Inch' here. Decimal, precision can be 0.00.
 
|Units: You can set units for that particular drawing, let's say 'Inch' here. Decimal, precision can be 0.00.
−
 
−
 
  
 
|-
 
|-
 
|'''08:10'''  
 
|'''08:10'''  
 
|Grid: You can either choose to show grid or not show grid. You can give grid size as .5x.5 specific size that you want.  
 
|Grid: You can either choose to show grid or not show grid. You can give grid size as .5x.5 specific size that you want.  
−
 
−
 
  
 
|-
 
|-
 
|'''08.20'''
 
|'''08.20'''
 
|Dimensions: Are useful when you want to start dimensioning on the drawing. Extension line, text height all these points matters when you want to show text.
 
|Dimensions: Are useful when you want to start dimensioning on the drawing. Extension line, text height all these points matters when you want to show text.
−
 
−
 
 
   
 
   
 
|-
 
|-
 
|'''08:34'''
 
|'''08:34'''
 
|If you think text height or the line or arrow is too small, you can always revisit this area later.  
 
|If you think text height or the line or arrow is too small, you can always revisit this area later.  
−
 
−
 
  
 
|-
 
|-
 
|'''08:42'''
 
|'''08:42'''
 
| I am setting some things now, after you are done click 'OK'.
 
| I am setting some things now, after you are done click 'OK'.
−
 
−
 
  
 
|-
 
|-
 
|'''08:51'''  
 
|'''08:51'''  
 
|It is better to save the drawing
 
|It is better to save the drawing
−
 
−
 
  
 
|-
 
|-
 
|'''08:55'''  
 
|'''08:55'''  
 
|We go to File->save as and select the directory where you would want to save it.
 
|We go to File->save as and select the directory where you would want to save it.
−
 
−
 
  
 
|-
 
|-
Line 568: Line 401:
  
 
Document Exchange Format, which is QCAD native.
 
Document Exchange Format, which is QCAD native.
−
 
−
 
  
 
|-
 
|-
Line 578: Line 409:
 
| '''09:22'''  
 
| '''09:22'''  
 
|let us start with our drawing.
 
|let us start with our drawing.
−
 
  
 
|-
 
|-
 
|'''09:24'''
 
|'''09:24'''
 
|We will draw rectangle and then cut it in half by drawing a line in the middle and draw circle exactly in the centre.
 
|We will draw rectangle and then cut it in half by drawing a line in the middle and draw circle exactly in the centre.
−
 
−
 
  
 
|-
 
|-
 
|'''09:30 '''
 
|'''09:30 '''
 
|Draw rectangle''':Go to tool bar-Line option. select rectangle.  
 
|Draw rectangle''':Go to tool bar-Line option. select rectangle.  
−
 
  
 
|-
 
|-
 
|'''09:37 '''
 
|'''09:37 '''
 
|From the snapping options, choose 'snap to grid'
 
|From the snapping options, choose 'snap to grid'
−
 
  
 
|-
 
|-
Line 603: Line 429:
 
|'''09:54'''  
 
|'''09:54'''  
 
|Rectangle is drawn.Double click right mouse button to come out of that command.  
 
|Rectangle is drawn.Double click right mouse button to come out of that command.  
−
 
  
 
|-
 
|-
Line 624: Line 449:
 
|'''10:17 '''
 
|'''10:17 '''
 
|And I go on the top line, notice it is snapping exactly to the middle point of the top line, click there.
 
|And I go on the top line, notice it is snapping exactly to the middle point of the top line, click there.
−
 
  
 
|-
 
|-
Line 637: Line 461:
 
|'''10:34''
 
|'''10:34''
 
| Click on circles icon and I am choosing center and radius.  
 
| Click on circles icon and I am choosing center and radius.  
−
 
  
 
|-
 
|-
Line 646: Line 469:
 
|'''10:40'''
 
|'''10:40'''
 
|I know my grid is .5x.5 and there are 6 divisions. So that means my rectangle is 30x40.  
 
|I know my grid is .5x.5 and there are 6 divisions. So that means my rectangle is 30x40.  
−
 
  
 
|-
 
|-
Line 664: Line 486:
 
|'''11:14 '''
 
|'''11:14 '''
 
|Click on '+' sign to add new layer. Go to 'dimensions'
 
|Click on '+' sign to add new layer. Go to 'dimensions'
−
 
  
 
|-
 
|-
 
|'''11:19'''  
 
|'''11:19'''  
 
|Give it a different colour, so that we can identify it separate from rest of the drawing.
 
|Give it a different colour, so that we can identify it separate from rest of the drawing.
−
 
  
 
|-
 
|-
Line 699: Line 519:
 
|'''12:07'''  
 
|'''12:07'''  
 
|When you want it back, click back on eye icon to make it visible.
 
|When you want it back, click back on eye icon to make it visible.
−
 
  
 
|-
 
|-
 
|'''12:11 '''
 
|'''12:11 '''
 
|Now if I want to change attributes of any object.
 
|Now if I want to change attributes of any object.
−
 
−
 
  
 
|-
 
|-
 
|'''12:I4'''  
 
|'''12:I4'''  
 
|click on that object and go to Modify->attributes
 
|click on that object and go to Modify->attributes
−
 
  
 
|-
 
|-
 
|'''12:18 '''
 
|'''12:18 '''
 
|Now once the selection is made, click on the arrow.
 
|Now once the selection is made, click on the arrow.
−
 
  
  
 
|-
 
|-
 
|'''12:21 '''
 
|'''12:21 '''
−
|Let's say I want to change, colour to 'Red'
+
|Let's say I want to change, color to 'Red'
−
 
+
  
 
|-
 
|-
 
|'''12:24'''  
 
|'''12:24'''  
 
|Width: let's increase it and the type: make it 'Dash and dot', click 'ok'
 
|Width: let's increase it and the type: make it 'Dash and dot', click 'ok'
−
 
−
 
  
 
|-
 
|-
 
|'''12:30 '''
 
|'''12:30 '''
 
|The attributes are changed. Let's save the drawing.
 
|The attributes are changed. Let's save the drawing.
−
 
−
 
  
 
|-
 
|-
 
|'''12:36'''  
 
|'''12:36'''  
 
|Now that you are familiar with the QCAD basic tool bar and drawing objects.  
 
|Now that you are familiar with the QCAD basic tool bar and drawing objects.  
−
 
  
 
|-
 
|-
 
|'''12:40 '''
 
|'''12:40 '''
 
|I would like you to draw a rectangle as shown in the figure. of size 20x30.
 
|I would like you to draw a rectangle as shown in the figure. of size 20x30.
−
 
−
 
  
 
|-
 
|-
 
|'''12:45'''
 
|'''12:45'''
 
| with center line of type dash and dot and red in colour.  
 
| with center line of type dash and dot and red in colour.  
−
 
−
 
  
 
|-
 
|-
 
|'''12:50'''
 
|'''12:50'''
 
| Draw two parallel lines are 5 units apart.
 
| Draw two parallel lines are 5 units apart.
−
 
−
 
  
 
|-
 
|-
 
|'''12:54 '''
 
|'''12:54 '''
 
|Add dimensions on a new layer.
 
|Add dimensions on a new layer.
−
 
  
 
|-
 
|-
Line 770: Line 572:
 
|'''13:01 '''
 
|'''13:01 '''
 
|It is supported by the National Mission on Education through ICT, MHRD government of India.
 
|It is supported by the National Mission on Education through ICT, MHRD government of India.
−
 
  
 
|-
 
|-
Line 776: Line 577:
 
|'''13:06'''
 
|'''13:06'''
 
And you can see more information about this at this website.  
 
And you can see more information about this at this website.  
−
 
  
 
|-
 
|-
 
|'''13:11 '''
 
|'''13:11 '''
 
|Thank you.
 
|Thank you.
−
 
  
 
|-
 
|-
 
|'''13:12 '''
 
|'''13:12 '''
 
|I hope you enjoyed the tutorial and enjoy exploring QCAD.
 
|I hope you enjoyed the tutorial and enjoy exploring QCAD.
−
 
  
 
|-
 
|-

Revision as of 16:46, 22 April 2013

Time' Narration
00:00 Hello and welcome to the tutorial Introduction to QCAD -2D drafting tool.
00:04 In this tutorial I will introduce you to the basics of QCAD tool and its interface.
00:11 Let's look at what is QCAD?
00:12 It is an application for computer aided drafting(CAD) in two dimensions.
00:16 Using QCAD you can create technical drawings such as plans for buildings, interiors, mechanical parts or schemas and diagrams.
00:24 Community edition of QCAD is available freely for download at: http://www.qcad.org/
00:31 For this tutorial, I am using GNU Linux operating system Ubuntu Version 10.04 LTS
00:38 and QCAD Community Edition Version 2.0.5.0
00:41 If you do not have it installed on your system,
00:47 you can do so by going to System->Administration->Synaptic Package Manager and
00:55 at the search box look for QCAD.
00:58 And install these applications
01:01 For more information on how to install software using synaptic,
01:05 please refer to spoken tutorial available on this website: www.spoken-tutorial.org
01:10 Once installed to start QCAD in Ubuntu 10.04 go to Applications->Accessories->terminal
01:17 and at the prompt type “qcad” and hit 'Enter'
01:21 This will launch the application in 10.04 version.


01:24 For other Ubuntu versions it is available under Applications menu.
01:28 In this tutorial we will see
01:33 Menu items and tool bar

drawing objects

snapping options

and using layers

01:37 A typical QCAD window looks like this.
01:40 It has a standard menu bar on top.
01:42 Options like Draw, Dimension, Modify and Snap are QCAD specific.
01:47 On the left side is the tool bar, which is used to draw objects.
01:53 At the very bottom is the status bar which displays various information about the current drawing.
01:59 Notice as my mouse is moving in the drawing area.
02:02 Coordinate widget on the extreme left side is displaying absolute and relative position of my mouse cursor.
02:10 Just above the status bar is the command line for QCad.
02:13 Which is used to put in exact co-ordinates to draw objects.
02:18 At the right side is the layer list and the block list.
02:22 These list the layers and blocks related information for the current drawing.
02:26 We will look at these in detail in subsequent tutorials.
02:30 Right in the middle is the drawing area.
02:33 Black in color with dots.
02:35 Dots signify the grid, at any time you can choose not to view grid by going on to top option and click on this 'grid' icon to not to show the grid.
02:47 Click it back again to make it visible.
02:50 Similarly all other windows as status bar, command line, block and lists can be enabled / disabled going to top menu View.->Views
03:00 and select check box in front of the window of your choice.
03:06 QCAD uses Cartesian and polar coordinates system to draw objects.
03:11 To draw objects we use tool bar from left or this can also be accessed from top menu → Draw option.
03:19 Let's start by drawing a line. From the tool bar click on the line icon.
03:23 There are numerous options to choose from
03:26 Let's click on line with two points. Notice the command prompt is asking to specify first point.
03:29 Move your mouse cursor on the drawing area.
03:36 There are two things happening now
03:37 1. mouse cursor has changed into white cross hair.
03:43 2.There is blue circle appearing right below the mouse cursor
03:46 It is basically hopping from grid to grid as I move my mouse, waiting for me to select.
03:51 I can click left mouse button to click for the start of the line
03:58 and click again to for the line to end. Line is drawn.
04:04 Notice if I keep clicking further it will start drawing line, as QCAD is still in line command.
04:10 For this I need to come out of that command
04:13 To come out of any command you press either 'Enter' or 'Esc' button on keyboard twice or double click right mouse button.
04:21 You will be out of any command
04:23 Similarly you can draw Parallel lines, horizontal lines, vertical lines, parallel lines with distance.
04:31 'Let's see this option. When I choose this option I need to specify distance between the lines and number of lines.
04:40 let's say 10 here and no. of lines I want 3.
04:47 You will move mouse cursor closer to entity in relation to which you would want parallel lines to be drawn.


04:54 Once satisfied I can confirm selection by clicking on left mouse button, and lines will be drawn on the board.
05:03 Now let us see the arc tool. From the tool bar choose arc.
05:07 I am choosing arc with center point and angles.
05:13 From snapping option let's choose 'snap to grid'
05:17 Notice command prompt is asking to specify center, left click to specify center.
05:22 Now it is asking to specify radius, I can enter say 30.
05:27 Now specify start angle and click again for end angle and arc is drawn.
05:32 Double click right mouse button to come out of that command.
05:35 Lets try and draw circle. Go to the circle icon from tool box, click on it. I am using circle with centre and radius.
05:44 Again from the snapping option choose 'snap to grid'.
05:48 Command line is asking to specify circle's center.
05:51 Go on the grid and left click to specify center. Circle is drawn.
05:56 It is drawn with previously specified radius. If I want to change I can change and draw new circle with different radius.
06:06 Unless you come out of that command, it will keep on drawing circles.
06:10 'So double click right mouse button and you are out of that.
06:13 Now that my drawing has become busier I can use zoom from top menu → view-> Zoom in to zoom in on the more details.
06:24 and view-> Zoom out to see the wider extent.
06:26 Zoom is very essential command because it is very useful when you draw details.
06:32 Similar effects can be achieved by rolling a middle mouse button to zoom in and out
06:37 Or I can also use View->(third option)Auto zoom to fit the drawing in the given area.
06:44 Let's try drawing a new file, Let me clear this area.
06:50 For this I click at one corner select and then from top menu->modify->Delete selected.
06:58 Every drawing QCAD starts at absolute 0,0 position it is marked by red cross hair on the drawing area.
07:05 'Every other point is drawn in relation with this point.
07:11 Before starting any drawing it is important to set drawing preferences' for QCAD to know which units you are using, what grid size you would want.
07:18 For this you go to Edit- and there are Application Preferences and Current drawing preferences.


Application preferences

07:25 Are the ones which apply to entire QCAD application, rather than just a single drawing
07:32 You can change background, grid colour, meta colour, language options and set the default Units that you want.


07:42 Lets say 'meter' here and click 'OK'.
07:46 Now let's go to Edit ->set Current Drawing preferences: These apply only to current drawing and once you close the drawing these needs to be set again.
07:57 Paper applies only when we want to print a drawing.
08:00 Units: You can set units for that particular drawing, let's say 'Inch' here. Decimal, precision can be 0.00.
08:10 Grid: You can either choose to show grid or not show grid. You can give grid size as .5x.5 specific size that you want.
08.20 Dimensions: Are useful when you want to start dimensioning on the drawing. Extension line, text height all these points matters when you want to show text.
08:34 If you think text height or the line or arrow is too small, you can always revisit this area later.
08:42 I am setting some things now, after you are done click 'OK'.
08:51 It is better to save the drawing
08:55 We go to File->save as and select the directory where you would want to save it.
09:09 I want to save it as qcad-dwg. Notice it is saving it as dxf format

Document Exchange Format, which is QCAD native.

09:18 Click on save, it saves the drawing.
09:22 let us start with our drawing.
09:24 We will draw rectangle and then cut it in half by drawing a line in the middle and draw circle exactly in the centre.
09:30 Draw rectangle:Go to tool bar-Line option. select rectangle.
09:37 From the snapping options, choose 'snap to grid'
09:40 Move cursor over the drawing area and left click for the first corner of rectangle and click away for second corner .
09:54 Rectangle is drawn.Double click right mouse button to come out of that command.
09:59 draw line going through middle:Now we want to draw line exactly in the middle, cutting it in two halves.
10:03 This is where snapping options will be useful.
10:06 Let's go click on line- Line with two points.
10:10 Now from grid options, since I want it exactly at middle. I choose 'snap to middle point'.
10:17 And I go on the top line, notice it is snapping exactly to the middle point of the top line, click there.
10:25 Go on the bottom line, click again. The line is drawn cutting the rectangle in two halves.
10:30 draw circle in the center of rectangle: Now let's draw circle in the center of the rectangle.
'10:34 Click on circles icon and I am choosing center and radius.
10:37 Go over here. If you want circle to occupy entire width.
10:40 I know my grid is .5x.5 and there are 6 divisions. So that means my rectangle is 30x40.
10:48 So I put radius 15 to cover entire width, and notice I need to click on the snap to 'centre point'.
10:54 And left click to confirm. Circle is drawn exactly in the centre of the rectangle.
11:04 Now that our drawing is ready so let's add dimensions. We always add dimensions to new layer so that we can keep it separate.


11:14 Click on '+' sign to add new layer. Go to 'dimensions'
11:19 Give it a different colour, so that we can identify it separate from rest of the drawing.
11:24 You can use type 'dash' then you go to top menu 'Dimensions'

Horizontal first. From the snapping option click on 'end point'

Click on first point of the line, then second point.

'11:37 'Now to place dimensions away from the line, from snapping option I can choose 'snap to grid' or free positioning and place it away. Left click once.
11:48 Again to place vertical go to dimensions->vertical, from end point
11:54 Place it again away by using 'free positioning'
11:58 This way if I have it on different layer I can always, when drawing gets busier click on Eye icon to not to show that layer and see the drawing clearly.


12:07 When you want it back, click back on eye icon to make it visible.
12:11 Now if I want to change attributes of any object.
12:I4 click on that object and go to Modify->attributes
12:18 Now once the selection is made, click on the arrow.


12:21 Let's say I want to change, color to 'Red'
12:24 Width: let's increase it and the type: make it 'Dash and dot', click 'ok'
12:30 The attributes are changed. Let's save the drawing.
12:36 Now that you are familiar with the QCAD basic tool bar and drawing objects.
12:40 I would like you to draw a rectangle as shown in the figure. of size 20x30.
12:45 with center line of type dash and dot and red in colour.
12:50 Draw two parallel lines are 5 units apart.
12:54 Add dimensions on a new layer.
12:56 I would like to acknowledge the spoken tutorial project which is part of the talk to a teacher project.
13:01 It is supported by the National Mission on Education through ICT, MHRD government of India.
13:06

And you can see more information about this at this website.

13:11 Thank you.
13:12 I hope you enjoyed the tutorial and enjoy exploring QCAD.
13.16 This is Leena signing off.

Contributors and Content Editors

Minal, Nancyvarkey, PoojaMoolya, Pratik kamble, Sandhya.np14, Sneha

Retrieved from "https://script.spoken-tutorial.org/index.php?title=QCad/C2/Introduction-to-QCAD/English-timed&oldid=3876"