Difference between revisions of "OpenFOAM/C2/2D-Laminar-Flow-in-a-channel/English-timed"
From Script | Spoken-Tutorial
Sandhya.np14 (Talk | contribs) |
PoojaMoolya (Talk | contribs) |
||
| Line 10: | Line 10: | ||
| 00:09 | | 00:09 | ||
| In this tutorial, I will show you- | | In this tutorial, I will show you- | ||
| − | + | '''2D geometry''' of '''channel''' | |
| − | + | '''Meshing''' the '''Geometry''' | |
| − | + | '''Solving''' and '''Post Processing results''' in '''Paraview''' and | |
| − | + | '''Validation''' using '''analytic result'''. | |
|- | |- | ||
| 00:25 | | 00:25 | ||
| To record this tutorial, I am using: | | To record this tutorial, I am using: | ||
| − | + | '''Linux Operating system Ubuntu''' version 12.04. | |
| − | + | '''OpenFOAM''' version 2.1.1 | |
| − | + | '''ParaView''' version 3.12.0 | |
|- | |- | ||
| Line 324: | Line 324: | ||
| 10:17 | | 10:17 | ||
| Watch the video available at this URL: | | Watch the video available at this URL: | ||
| − | http://spoken-tutorial.org/What_is_a_Spoken_Tutorial | + | http://spoken-tutorial.org/What_is_a_Spoken_Tutorial |
| − | It summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it. | + | It summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it. |
|- | |- | ||
| 10:28 | | 10:28 | ||
| The Spoken Tutorial Project team: * Conducts workshops using spoken tutorials. | | The Spoken Tutorial Project team: * Conducts workshops using spoken tutorials. | ||
| − | + | Gives certificates to those who pass an online test. | |
| − | For more details, please write to: '''contact@spoken-tutorial.org''' | + | For more details, please write to: '''contact@spoken-tutorial.org''' |
|- | |- | ||
Revision as of 15:28, 10 March 2017
| Time | Narration |
| 00:01 | Hello and welcome to the spoken tutorial on Simulating 2D Laminar Flow in a Channel using OpenFoam. |
| 00:09 | In this tutorial, I will show you-
2D geometry of channel Meshing the Geometry Solving and Post Processing results in Paraview and Validation using analytic result. |
| 00:25 | To record this tutorial, I am using:
Linux Operating system Ubuntu version 12.04. OpenFOAM version 2.1.1 ParaView version 3.12.0 |
| 00:39 | Note that OpenFOAM version 2.1.1 is supported on ubuntu version 12.04. |
| 00:45 | Hence forth all the tutorials will be covered using OpenFOAM version 2.1.1 and ubuntu version 12.04. |
| 00:56 | As a prerequisite for this tutorial, you should know how to create geometry using OpenFOAM. |
| 01:03 | If not, please refer to the relevant tutorials on our website. |
| 01:09 | We simulate flow in a channel to determine flow development length along the downstream.
Channel flow problem description. |
| 01:19 | The boundary names and the inlet conditions are shown as in this figure. |
| 01:26 | The flow develpoment length is given by the formula L= 0.05 * Re * D. |
| 01:32 | 'Re' which is the Reynolds number and 'D' which is the channel height. |
| 01:37 | Using the formula, the length of the channel comes out to be 5 meters and height is kept as 1 meter. |
| 01:45 | The Inlet velocity is 1 meter per second. And, we are solving this for a Reynolds number ( Re ) equal to 100. |
| 01:53 | This is a steady state problem . Therefore we are using a steady state incompressible solver for this case. |
| 02:01 | This is the file structure of our case. The folder should be created in the solver type that we choose. I have already created a folder in simpleFoam folder of incompressible flow solvers. |
| 02:18 | The folder is named as channel. Now, let me switch to the folder. |
| 02:25 | Copy 0, Constant and System folders of any other case, in the simpleFoam directory. |
| 02:34 | I have copied the file structure of the case pitzDaily. |
| 02:38 | Paste it inside the channel folder and make the necessary changes in the geometry, boundary faces and boundary condition. |
| 02:48 | Now, let me open the command terminal. |
| 02:51 | To do this, press Ctrl+Alt +t keys simultaneously on your keyboard. |
| 02:57 | In the terminal, type "run" and press Enter. |
| 03:01 | Now type cd space tutorials and press Enter. |
| 03:08 | Now type cd space incompressible and press Enter. |
| 03:15 | Type cd space simpleFoam and press Enter. |
| 03:20 | Now type cd space channel and press Enter. |
| 03:28 | Now, type "ls" and press Enter. |
| 03:33 | You will see three folders 0, Constant and system. |
| 03:37 | Now type cd space constant and press Enter. |
| 03:48 | Now type "ls" and press Enter. |
| 03:52 | In this, you will see the files containing properties of fluid and a folder named polymesh. |
| 03:59 | RASProperties contains Reynolds-averaged stress model. |
| 04:03 | transportProperties contains the transport model and kinematic viscosity that is (nu), in this case is set at 0.01 m²/s. |
| 04:17 | Now in terminal, type cd space polyMesh and press Enter. Now, type "ls" and press Enter. |
| 04:30 | You will see the blockMeshDict file here. |
| 04:33 | To open up the blockMeshDict file, in the terminal, type "gedit space blockMeshDict" and press Enter. Scroll down. |
| 04:48 | The geometry is in meters. So, the convertTometers is set to 1. Next, we have defined the vertices of the channel. |
| 04:59 | We have used a 100 X 100 mesh size here and cell spacing is kept as ( 1 1 1 ). |
| 05:07 | Next, we have setup the boundary conditions and their types which are inlet, outlet, top and bottom. |
| 05:19 | As this is a 2D Geometry, front and Back are kept as empty. |
| 05:27 | Also, this being a simple geometry, mergePatchPair and edges are to be kept empty. Close the blockMeshDict file. |
| 05:38 | In the command terminal, type cd space ..(dot dot) and press Enter. |
| 05:44 | Again, type cd space .. (dot dot) and press Enter. |
| 05:49 | Now. in the terminal, type cd space 0 (Zero) and press Enter. Now, type "ls" and press Enter. |
| 05:58 | This contains the intial boundary conditions and wall functions for the channel case. |
| 06:05 | It should contain various files such as epsilon, k, nut, nuTilda which are the wall functionsand 'p' , 'R' and capital 'U' which are initial conditions of the flow. |
| 06:20 | Let me switch back to the slides. |
| 06:24 | Calculate 'k' which is the turbulent kinetic energy from the formula given in the slide |
| 06:29 | where Ux, Uy and Uz are the velocity components in the x, y and z directions and U' ( dash ) = 0.05 times u actual. |
| 06:43 | Calculate epsilon from the formula given where epsilon is the rate of dissipation of turbulent energy, C mu is a constant and its value is 0.09. |
| 06:56 | And 'l' is the length of the channel. Let me minimize this. |
| 07:02 | Change only the boundary names in each of the above files. |
| 07:07 | Note that the values of nut, nuTilda, R are kept to default. |
| 07:13 | Rest of the files should contain the initial value for each of the boundary faces. |
| 07:21 | Now, in the terminal, type cd (space) ..(dot dot) and press Enter. |
| 07:27 | There are no changes to be done in the system folder. |
| 07:31 | Now we need to mesh the geometry. To do this, in the command terminal, type "blockMesh" and press Enter. |
| 07:40 | The Meshing is done. Now let me switch back to the slide. |
| 07:45 | The type of solver we are using here is SimpleFoam. It is a Steady-state solver for in-compressible and turbulent flows. |
| 07:55 | Let me minimize this. |
| 07:56 | In the command terminal, type "simpleFoam" and press Enter. |
| 08:03 | Iterations running will be seen in the command terminal. |
| 08:07 | Iterations running may take some time. |
| 08:11 | The iterations will stop once the solution is converged or it reaches its end time value. |
| 08:16 | To view the results in paraView, in the terminal, |
| 08:20 | type "paraFoam" and press Enter. This will open up the paraView window. |
| 08:28 | On the left hand side of the paraView window, click Apply. The geometry can be seen here. |
| 08:35 | On top of the active variable control menu, change the drop down menu from solid color to capital U. |
| 08:50 | You can see the initial state of velocity magnitude at inlet.. On top of the paraView window, click on theplay button of the VCR control. |
| 09:00 | you can see the final value of the velocity magnitude. |
| 09:07 | Also toggle on the color legend from the left hand side top of active variable control menu, click APPLY again. |
| 09:16 | Now go to Display, scroll down. You can see Rescale, click on it. |
| 09:24 | We can see that once the flow has fully developed, it attains a maximum uniform velocity at the center. Now, let me switch back to the slides. |
| 09:36 | The results obtained can be validated with the analytical solution for laminar flow in achannel which is u(max)=1.5 Uavg. |
| 09:46 | Using openFoam, we obtain a result of u(max) = 1.48 meters per second which is a good match.
This brings us to the end of the tutorial. |
| 09:57 | In this tutorial, we learnt the file structure of channel, obtained solution using steady state solver. Viewed the geometry in paraview and validation with analytic results. |
| 10:08 | As an assignment-
solve the problem for Reynold's Number equal to 1500 and validate it with the analytical result. |
| 10:17 | Watch the video available at this URL:
http://spoken-tutorial.org/What_is_a_Spoken_Tutorial It summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it. |
| 10:28 | The Spoken Tutorial Project team: * Conducts workshops using spoken tutorials.
Gives certificates to those who pass an online test. For more details, please write to: contact@spoken-tutorial.org |
| 10:42 | Spoken Tutorials are part of Talk to a Teacher project. It is supported by the National Mission on Education through ICT, MHRD, Government of India. |
| 10:52 | More information on this mission is available at the following URL link: |
| 10:57 | This is Rahul Joshi from IIT Bombay, signing off. Thanks for joining. |
